We follow the same queue teardown sequence in delete, reset and error
recovery. Centralize the logic.  This patch does not change any
functionality.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Centralize controller sequence to a single routine that correctly cleans
up after failures instead of having multiple apperances in several flows
(create, reset, reconnect).

One thing that we also gain here are the sanity/boundary checks also
when connecting back to a dynamic controller.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

If the controller is going away, we need to unquiesce the IO queues so
that all pending request can fail gracefully before moving forward with
controller deletion. Do that before we destroy the IO queues so
blk_cleanup_queue won't block in freeze.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This will print the disk name to the nvme event trace for io requests so
a user can better distinguish traffic to different disks. This can be used
to  create disk based filters. For example, to see only nvme0n2 traffic:

  echo "disk == \"nvme0n2\"" > /sys/kernel/debug/tracing/events/nvme/filter
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
[hch: turned __assign_disk_name into an inline function]
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This appends the controller instance to the nvme trace buffer to
distinguish which controller is dispatching and completing a command.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

We can not match a command to its completion based on the command
id alone. We need the submitting queue identifier to pair with the
completion, so this patch adds that to the trace buffer.

This patch is also collapsing the admin and IO submission traces into a
single one so we don't need to duplicate this and creating unnecessary
code branches: we know if the command is an admin vs IO based on the qid.

And since we're here, the patch fixes code formatting in the area.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
[hch: move the qid helper to nvme.h and made it an inline function]
Signed-off-by: NChristoph Hellwig <hch@lst.de>

We will need to reference the controller in the setup and completion
time for tracing and future traffic based keep alive support.
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Posting receive buffer operation can fail, thus we should make
sure to have an error flow during initialization phase. While
we're here, add a debug print in case of a failure.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

ib_post_send operation should succeed unless something unusual
happened to the ib device.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The patch enables inline data sizes using up to 4 recv sges, and capping
the size at 16KB or at least 1 page size.  So on a 4K page system, up to
16KB is supported, and for a 64K page system 1 page of 64KB is supported.

We avoid > 0 order page allocations for the inline buffers by using
multiple recv sges, one for each page.  If the device cannot support
the configured inline data size due to lack of enough recv sges, then
log a warning and reduce the inline size.

Add a new configfs port attribute, called param_inline_data_size,
to allow configuring the size of inline data for a given nvmf port.
The maximum size allowed is still enforced by nvmet-rdma with
NVMET_RDMA_MAX_INLINE_DATA_SIZE, which is now max(16KB, PAGE_SIZE).
And the default size, if not specified via configfs, is still PAGE_SIZE.
This preserves the existing behavior, but allows larger inline sizes
for small page systems.  If the configured inline data size exceeds
NVMET_RDMA_MAX_INLINE_DATA_SIZE, a warning is logged and the size is
reduced.  If param_inline_data_size is set to 0, then inline data is
disabled for that nvmf port.
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Allow up to 4 segments of inline data for NVMF WRITE operations. This
reduces latency for small WRITEs by removing the need for the target to
issue a READ WR for IB, or a REG_MR + READ WR chain for iWarp.

Also cap the inline segments used based on the limitations of the
device.
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Add a new "buffered_io" attribute, which disabled direct I/O and thus
enables page cache based caching when enabled.   The attribute can only
be changed when the namespace is disabled as the file has to be reopend
for the change to take effect.

The possibly blocking read/write are deferred to a newly introduced
global workqueue.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This patch adds support for Commands Supported and Effects log page
(Log Identifier 05h) for NVMeOF. This also makes it easier to find
which commands are supported, e.g. :-

subnqn    : testnqn1
Admin Command Set
ACS2     [Get Log Page                    ] 00000001
ACS6     [Identify                        ] 00000001
ACS8     [Abort                           ] 00000001
ACS9     [Set Features                    ] 00000001
ACS10    [Get Features                    ] 00000001
ACS12    [Asynchronous Event Request      ] 00000001
ACS24    [Keep Alive                      ] 00000001

NVM Command Set
IOCS0    [Flush                           ] 00000001
IOCS1    [Write                           ] 00000001
IOCS2    [Read                            ] 00000001
IOCS8    [Write Zeroes                    ] 00000001
IOCS9    [Dataset Management              ] 00000001

This partticular functionality can be used from the host side to examine
the NVMeOF ctrl commands supported.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Currently, the code initializes the keep alive work item whenever
nvme_start_keep_alive() is called. However, this routine is called
several times while reconnecting, etc. Although it's hoped that keep
alive is always disabled and not scheduled when start is called,
re-initing if it were scheduled or completing can have very bad
side effects. There's no need for re-initialization.

Move the keep_alive work item and cmd struct initialization to
controller init.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Added some feature ids present in nvme-cli but not kernel.
Signed-off-by: NRevanth Rajashekar <revanth.rajashekar@intel.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Inside blk_mq_try_issue_list_directly(), if the request is issued as
failed, we shouldn't try to do it again, otherwise the warning in
blk_mq_start_request() will be triggered. This change is aligned to
behaviour of other ways of request issue & dispatch.

Fixes: 6ce3dd6e ("blk-mq: issue directly if hw queue isn't busy in case of 'none'")
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: kernel test robot <rong.a.chen@intel.com>
Cc: LKP <lkp@01.org>
Reported-by: Nkernel test robot <rong.a.chen@intel.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

With the change to use UINT_MAX I broke the depth check as any value of
inflight (ie 0) would be less than (int)UINT_MAX.  Fix this by changing
everything to unsigned int to match the depth.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Add tracking of REQ_OP_DISCARD ios to the per-cgroup io.stat.  Two
fields, dbytes and dios, to respectively count the total bytes and
number of discards are added.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Andy Newell <newella@fb.com>
Cc: Michael Callahan <michaelcallahan@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Add tracking of REQ_OP_DISCARD ios to the partition statistics and
append them to the various stat files in /sys as well as
/proc/diskstats.  These are tracked with the same four stats as reads
and writes:

Number of discard ios completed.
Number of discard ios merged
Number of discard sectors completed
Milliseconds spent on discard requests

This is done via adding a new STAT_DISCARD define to genhd.h and then
using it to index that stat field for discard requests.

tj: Refreshed on top of v4.17 and other previous updates.
Signed-off-by: NMichael Callahan <michaelcallahan@fb.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Andy Newell <newella@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Add and use a new op_stat_group() function for indexing partition stat
fields rather than indexing them by rq_data_dir() or bio_data_dir().
This function works similarly to op_is_sync() in that it takes the
request::cmd_flags or bio::bi_opf flags and determines which stats
should et updated.

In addition, the second parameter to generic_start_io_acct() and
generic_end_io_acct() is now a REQ_OP rather than simply a read or
write bit and it uses op_stat_group() on the parameter to determine
the stat group.

Note that the partition in_flight counts are not part of the per-cpu
statistics and as such are not indexed via this function.  It's now
indexed by op_is_write().

tj: Refreshed on top of v4.17.  Updated to pass around REQ_OP.
Signed-off-by: NMichael Callahan <michaelcallahan@fb.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joshua Morris <josh.h.morris@us.ibm.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Matias Bjorling <mb@lightnvm.io>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Alasdair Kergon <agk@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Add defines for STAT_READ and STAT_WRITE for indexing the partition
stat entries. This clarifies some fs/ code which has hardcoded 1 for
STAT_WRITE and will make it easier to extend the stats with additional
fields.

tj: Refreshed on top of v4.17.
Signed-off-by: NMichael Callahan <michaelcallahan@fb.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Add a part_stat_read_accum macro to genhd.h to read and sum across
field entries.  For example to sum up the number read and write
sectors completed.  In addition to being ar reasonable cleanup by
itself this will make it easier to add new stat fields in the future.

tj: Refreshed on top of v4.17.
Signed-off-by: NMichael Callahan <michaelcallahan@fb.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

c11f0c0b ("block/mm: make bdev_ops->rw_page() take a bool for
read/write") replaced @OP with boolean @is_write, which limited the
amount of information going into ->rw_page() and more importantly
page_endio(), which removed the need to expose block internals to mm.

Unfortunately, we want to track discards separately and @is_write
isn't enough information.  This patch updates bdev_ops->rw_page() to
take REQ_OP instead but leaves page_endio() to take bool @is_write.
This allows the block part of operations to have enough information
while not leaking it to mm.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

* Remove checkpatch errors caused due to assignment operation in if
condition
Signed-off-by: NRAGHU Halharvi <raghuhack78@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In case of 'none' io scheduler, when hw queue isn't busy, it isn't
necessary to enqueue request to sw queue and dequeue it from
sw queue because request may be submitted to hw queue asap without
extra cost, meantime there shouldn't be much request in sw queue,
and we don't need to worry about effect on IO merge.

There are still some single hw queue SCSI HBAs(HPSA, megaraid_sas, ...)
which may connect high performance devices, so 'none' is often required
for obtaining good performance.

This patch improves IOPS and decreases CPU unilization on megaraid_sas,
per Kashyap's test.

Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Reported-by: NKashyap Desai <kashyap.desai@broadcom.com>
Tested-by: NKashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In our longer tests we noticed that some boxes would degrade to the
point of uselessness.  This is because we truncate the current time when
saving it in our bio, but I was using the raw current time to subtract
from.  So once the box had been up a certain amount of time it would
appear as if our IO's were taking several years to complete.  Fix this
by truncating the current time so it matches the issue time.  Verified
this worked by running with this patch for a week on our test tier.
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Early versions of these patches had us waiting for seconds at a time
during submission, so we had to adjust the timing window we monitored
for latency.  Now we don't do things like that so this is unnecessary
code.
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We can't know if a block is closed or not on 1.2 devices, so assume
closed state to make sure that blocks are erased before writing.

Fixes: 32ef9412 ("lightnvm: pblk: implement get log report chunk")
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In the read path, partial reads are currently performed synchronously
which affects performance for workloads that generate many partial
reads. This patch adds an asynchronous partial read path as well as
the required partial read ctx.
Signed-off-by: NHeiner Litz <hlitz@ucsc.edu>
Reviewed-by: NIgor Konopko <igor.j.konopko@intel.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The error messages in pblk does not say which pblk instance that
a message occurred from. Update each error message to reflect the
instance it belongs to, and also prefix it with pblk, so we know
the message comes from the pblk module.
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

For devices that does not specify a limit on its transfer size, the
get_chk_meta command may send down a single I/O retrieving the full
chunk metadata table. Resulting in large 2-4MB I/O requests. Instead,
split up the I/Os to a maximum of 256KB and issue them separately to
reduce memory requirements.
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If using pblk on a 32bit architecture, and there is a need to
perform a partial read, the partial read bitmap will only have
allocated 32 entries, where as 64 are needed.

Make sure that the read_bitmap is initialized to 64bits on 32bit
architectures as well.
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Reviewed-by: NIgor Konopko <igor.j.konopko@intel.com>
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Since both blk_old_get_request() and blk_mq_alloc_request() initialize
rq->__data_len to zero, it is not necessary to initialize that member
in nvme_nvm_alloc_request(). Hence remove the rq->__data_len
initialization from nvme_nvm_alloc_request().
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When recovering a line, an extra check was added when debugging was
active, such that minor version where also checked. Unfortunately,
this used the ifdef NVM_DEBUG, which is not correct.

Instead use the proper DEBUG def, and now that it compiles, also fix
the variable.
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Fixes: d0ab0b1a ("lightnvm: pblk: check data lines version on recovery")
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There is no users of CONFIG_NVM_DEBUG in the LightNVM subsystem. All
users are in pblk. Rename NVM_DEBUG to NVM_PBLK_DEBUG and enable
only for pblk.

Also fix up the CONFIG_NVM_PBLK entry to follow the code style for
Kconfig files.
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Some devices can expose mw_cunits equal to 0, it can cause the
creation of too small write buffer and cause performance to drop
on write workloads.

Additionally, write buffer size must cover write data requirements,
such as WS_MIN and MW_CUNITS - it must be greater than or equal to
the larger one multiplied by the number of PUs. However, for
performance reasons, use the WS_OPT value to calculation instead of
WS_MIN.

Because the place where buffer size is calculated was changed, this
patch also removes pgs_in_buffer filed in pblk structure.
Signed-off-by: NMarcin Dziegielewski <marcin.dziegielewski@intel.com>
Signed-off-by: NIgor Konopko <igor.j.konopko@intel.com>
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <mb@lightnvm.io>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Remove blkdev_entry_to_request() macro, which remained unused through
the observable history, also note that it repeats list_entry_rq() macro
verbatim.
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Use the existing %pad printk format to print dma_addr_t values.
This avoids the following warnings when compiling on the parisc64 platform:

drivers/block/skd_main.c: In function 'skd_preop_sg_list':
drivers/block/skd_main.c:660:4: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 6 has type 'dma_addr_t {aka unsigned int}' [-Wformat=]
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>