- 15 10月, 2015 20 次提交
-
-
由 Alex Deucher 提交于
Everything is evicted from VRAM before suspend, so we need to make sure all BOs are unpinned and re-pinned after resume. Fixes broken mouse cursor after resume introduced by commit b9729b17. Port of radeon commit: f3cbb17bReviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Port of radeon commit: 8991668aReviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Take a GEM reference for and pin the new cursor BO, unpin and drop the GEM reference for the old cursor BO in dce8 crtc_cursor_set2, and use amdgpu_crtc->cursor_addr in dce8 set_cursor. This fixes dce8 cursor_reset accidentally incrementing the cursor BO pin count, and cleans up the code a little. Port of radeon commit: cd404af0Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
It's only needed in dce8 crtc_cursor_set2. Port of radeon commit: 2e007e61Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Setting a mode seems to clear the cursor registers, so we need to re-program them to make sure the cursor is visible. Port of radeon commit: 6d3759fa v2: change radeon reference in error message Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
The cursor_set2 hook provides the cursor hotspot position within the cursor image. When the hotspot position changes, we can adjust the cursor position such that the hotspot doesn't move on the screen. This prevents the cursor from appearing to intermittently jump around on the screen when the position of the hotspot within the cursor image changes. Port of radeon commits: 78b1a601 3feba08dReviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Port of radeon commit: 8991668aReviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Take a GEM reference for and pin the new cursor BO, unpin and drop the GEM reference for the old cursor BO in dce11 crtc_cursor_set2, and use amdgpu_crtc->cursor_addr in dce11 set_cursor. This fixes dce11 cursor_reset accidentally incrementing the cursor BO pin count, and cleans up the code a little. Port of radeon commit: cd404af0Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
It's only needed in dce11 crtc_cursor_set2. Port of radeon commit: 2e007e61Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Setting a mode seems to clear the cursor registers, so we need to re-program them to make sure the cursor is visible. Port of radeon commit: 6d3759fa v2: change radeon reference in error output Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
The cursor_set2 hook provides the cursor hotspot position within the cursor image. When the hotspot position changes, we can adjust the cursor position such that the hotspot doesn't move on the screen. This prevents the cursor from appearing to intermittently jump around on the screen when the position of the hotspot within the cursor image changes. Port of radeon commits: 78b1a601 3feba08dReviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Port of radeon commit: 8991668aReviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Take a GEM reference for and pin the new cursor BO, unpin and drop the GEM reference for the old cursor BO in dce10 crtc_cursor_set2, and use amdgpu_crtc->cursor_addr in dce10 set_cursor. This fixes dce10 cursor_reset accidentally incrementing the cursor BO pin count, and cleans up the code a little. Port of radeon commit: cd404af0Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
It's only needed in dce10 crtc_cursor_set2. Port of radeon commit: 2e007e61Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Setting a mode seems to clear the cursor registers, so we need to re-program them to make sure the cursor is visible. Port of radeon commit: 6d3759fa v2: change radeon reference in error message Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
The cursor_set2 hook provides the cursor hotspot position within the cursor image. When the hotspot position changes, we can adjust the cursor position such that the hotspot doesn't move on the screen. This prevents the cursor from appearing to intermittently jump around on the screen when the position of the hotspot within the cursor image changes. Port of radeon commits: 78b1a601 3feba08dReviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Better precision than the regular div opcode. v2: drop 64 bit divide v3: fix op handling. This actually is a 64 bit divide. Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Better precision than the regular mul opcode. v2: handle big endian properly. Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Just skips a data section. Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Basically a nop. Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 08 10月, 2015 5 次提交
-
-
由 Alex Deucher 提交于
These are buggy on some asics and not really used anymore now that the GPU schedular is enabled. Change-Id: I67182b409d64de308392a15d1a0a15018071dc0b Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Chunming Zhou 提交于
Change-Id: Idce64f63e8422324996fc5d583d0bc9a5ac60d0c Signed-off-by: NChunming Zhou <david1.zhou@amd.com> Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
由 Chunming Zhou 提交于
need to decrease visible vram usage by default. Signed-off-by: NChunming Zhou <david1.zhou@amd.com> Reviewed-by: Nmonk.liu <monk.liu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
由 Chunming Zhou 提交于
Signed-off-by: NChunming Zhou <david1.zhou@amd.com> Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
由 Alex Deucher 提交于
Calculate the driver state in sw_init and program the registers in hw init. Acked-by: NLeo Liu <leo.liu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 03 10月, 2015 6 次提交
-
-
由 Grazvydas Ignotas 提交于
There doesn't seem to be any need to have 'ib' volatile, the code is not even consistent with it and some places already miss it. As it is now it's just making gcc produce worse code. If there are special requirements for that memory, then proper primitives like memory barriers or accessor functions should be used, but it doesn't look like that is needed here. While at it, change the type to match the one in radeon_ib structure. Reviewed-by: NDave Airlie <airlied@redhat.com> Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Grazvydas Ignotas 提交于
After this patch the register check loop does the same thing as before, except that now gcc does better job optimizing it: it now sees that end_reg was already checked against PACKET3_SET_CONTEXT_REG_END and can optimize REG_SAFE_BM_SIZE comparison out of evergreen_is_safe_reg() as (PACKET3_SET_CONTEXT_REG_END >> 7) < REG_SAFE_BM_SIZE. Reviewed-by: NDave Airlie <airlied@redhat.com> Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Grazvydas Ignotas 提交于
evergreen_cs_check_reg() is a large function and gcc doesn't want to inline it. It has a quick check for reg_safe_bm[] to see if register needs special handling, which often results in early exit. However because the function is large, it has a long prologue/epilogue to save/restore all the callee-save registers which according to perf is taking significant amount of time. To avoid this, we can reuse evergreen_is_safe_reg() to do the early check directly in register loop. Reviewed-by: NDave Airlie <airlied@redhat.com> Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Grazvydas Ignotas 提交于
To avoid having to distinguish between CAYMAN or older on every register check, place a pointer in evergreen_cs_track and use it unconditionally. Also make use of the fact that both reg_safe_bm[] arrays are of the same length to remove another CAYMAN check. Reviewed-by: NDave Airlie <airlied@redhat.com> Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Lukas Wunner 提交于
Currently everyone and their dog has their own favourite spelling for vga_switcheroo. This makes it hard to grep dmesg for log entries relating to vga_switcheroo. It also makes it hard to find related source files in the tree. vga_switcheroo.c uses pr_fmt "vga_switcheroo". Use that everywhere. Signed-off-by: NLukas Wunner <lukas@wunner.de> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Lukas Wunner 提交于
Currently everyone and their dog has their own favourite spelling for vga_switcheroo. This makes it hard to grep dmesg for log entries relating to vga_switcheroo. It also makes it hard to find related source files in the tree. vga_switcheroo.c uses pr_fmt "vga_switcheroo". Use that everywhere. Signed-off-by: NLukas Wunner <lukas@wunner.de> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 25 9月, 2015 9 次提交
-
-
由 Thierry Reding 提交于
This function is the KMS native variant of drm_vblank_count_and_time(). It takes a struct drm_crtc * instead of a struct drm_device * and an index of the CRTC. Eventually the goal is to access vblank data through the CRTC only so that the per-CRTC data can be moved to struct drm_crtc. Signed-off-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Thierry Reding 提交于
Since the original crtc parameter was renamed to pipe, there is no longer a need to artificially prefix the CRTC parameter. Signed-off-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Geliang Tang 提交于
Fixes the following sparse warning: drivers/gpu/drm/drm_atomic.c:442:5: warning: symbol 'drm_atomic_crtc_get_property' was not declared. Should it be static? Signed-off-by: NGeliang Tang <geliangtang@163.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Thierry Reding 提交于
The DRM/DP helpers already contain a definition for this macro. Remove the duplicate in the GMA500 driver to avoid having to keep both updated synchronously. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: NThierry Reding <treding@nvidia.com> Reviewed-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Maarten Lankhorst 提交于
Keep the fb_id, which means that any application exiting without unsetting the framebuffer from all planes will preserve its contents. This is similar to preserving the initial framebuffer, except all planes are preserved. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com> [danvet: Remove unused variable, reported by Stephen Rothwell.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Maarten Lankhorst 提交于
Previously RMFB and fd close chose to disable any plane that had an active framebuffer from this file. If it was a primary plane the crtc was disabled. However the fbdev code or any system compositor should restore the planes anyway so there's no need to do it twice. The old fb_id is zero'd, so there's no danger of being able to restore the fb from fb_id. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Ville Syrjälä 提交于
When lacking am accurate hardware frame counter, we can fall back to using the vblank timestamps to guesstimagte how many vblanks have elapsed since the last time the vblank counter was updated. Take the oppostunity to unify the vblank_disable_and_save() and drm_handle_vblank_events() to call the same function (drm_update_vblank_count()) to perform the vblank updates. If the hardware/driver has an accurate frame counter use it instead of the timestamp based guesstimate. If the hardware/driver has neither a frame counter nor acurate vblank timestamps, we fall back to assuming that each drm_handle_vblank_events() should increment the vblank count by one. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Ville Syrjälä 提交于
Remove the NULL 't_vblank' checks from store_vblank() since that will never happen. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Ville Syrjälä 提交于
Avoid confusion and don't use 'vbl_status' as both the .get_scanout_position() return value and the return value from drm_calc_vbltimestamp_from_scanoutpos(). While at it make 'vbl_status' unsigned and print it as hex in the debug prints since it's a bitmask. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-