- 10 10月, 2007 16 次提交
-
-
由 Chuck Lever 提交于
"Universal addresses" are a string representation of an IP address and port. They are described fully in RFC 3530, section 2.2. Add support for generating them in the RPC client's socket transport module. Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
-
由 Chuck Lever 提交于
Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Finalize support for setting up RPC client transports to remote RPC services addressed via IPv6. Based on work done by Gilles Quillard at Bull Open Source. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clone separate connect worker functions for connecting AF_INET6 sockets. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Prepare for introduction of IPv6 versions of same. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Finishing a socket connect is the same for IPv4 and IPv6, so split it out into a helper. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clone xs_bindresvport into two functions, one that can handle IPv4 addresses, and one that can handle IPv6 addresses. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Prepare for introduction of IPv6-specific socket bind function. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
We could clone xs_set_port, but this is easier overall. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clone xs_format_ipv4_peer_addresses into an IPv6 version. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Prepare to add an IPv6 version of xs_format_peer_addresses by renaming it to xs_format_ipv4_peer_addresses. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Add support for the NFS client's need to export volume information with IP addresses formatted in hex instead of decimal. This isn't used yet, but subsequent patches (not in this series) will change the NFS client to use this functionality. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Use more generic logic to free buffers holding formatted addresses. This makes it less likely a bug will be introduced when adding additional buffer types in xs_format_peer_address(). Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
include/linux/kernel.h gives us some nice macros for formatting IP addresses. Use them. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 11 7月, 2007 4 次提交
-
-
由 Frank van Maarseveen 提交于
In addition to binding to a local privileged port the NFS client should allow binding to a specific local address. This is used by the server for callbacks. The patch adds the necessary interface. Signed-off-by: NFrank van Maarseveen <frankvm@frankvm.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Frank van Maarseveen 提交于
Cleanup argument passing to functions for creating an RPC transport. Signed-off-by: NFrank van Maarseveen <frankvm@frankvm.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up, for consistency. Rename rpcb_getport as rpcb_getport_async, to match the naming scheme of rpcb_getport_sync. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Brian Behlendorf writes: The root cause of the NFS hang we were observing appears to be a rare deadlock between the kernel provided usermodehelper API and the linux NFS client. The deadlock can arise because both of these services use the generic linux work queues. The usermodehelper API run the specified user application in the context of the work queue. And NFS submits both cleanup and reconnect work to the generic work queue for handling. Normally this is fine but a deadlock can result in the following situation. - NFS client is in a disconnected state - [events/0] runs a usermodehelper app with an NFS dependent operation, this triggers an NFS reconnect. - NFS reconnect happens to be submitted to [events/0] work queue. - Deadlock, the [events/0] work queue will never process the reconnect because it is blocked on the previous NFS dependent operation which will not complete.` The solution is simply to run reconnect requests on rpciod. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 01 5月, 2007 1 次提交
-
-
由 Chuck Lever 提交于
Now that we have a version of the portmapper that supports versions 3 and 4 of the rpcbind protocol, use it for new RPC client connections over sockets. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 15 2月, 2007 4 次提交
-
-
由 Eric W. Biederman 提交于
The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Acked-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric W. Biederman 提交于
We don't need this to prevent module unload races so remove the unnecessary code. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric W. Biederman 提交于
Because the sunrpc sysctls don't conflict with any other sysctls the setting the insert at head flag to register_sysctl has no semantic meaning. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tim Schmielau 提交于
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: NTim Schmielau <tim@physik3.uni-rostock.de> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 2月, 2007 1 次提交
-
-
由 Chuck Lever 提交于
The tk_pid field is an unsigned short. The proper print format specifier for that type is %5u, not %4d. Also clean up some miscellaneous print formatting nits. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 08 12月, 2006 1 次提交
-
-
由 Peter Zijlstra 提交于
Stick NFS sockets in their own class to avoid some lockdep warnings. NFS sockets are never exposed to user-space, and will hence not trigger certain code paths that would otherwise pose deadlock scenarios. [akpm@osdl.org: cleanups] Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NSteven Dickson <SteveD@redhat.com> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Acked-by: NNeil Brown <neilb@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> [ Fixed patch corruption by quilt, pointed out by Peter Zijlstra ] Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 06 12月, 2006 13 次提交
-
-
由 Chuck Lever 提交于
Clean-up: The RPC client currently creates some sysctls that are specific to the socket transport. Move those entirely into xprtsock.c. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Over time we will want to add some specific init and cleanup logic for the xprtsock implementation. Add stub routines for initialization and exit processing. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean-up: hch suggested that the RPC client shouldn't pollute the name space used by the generic skb manipulation routines in net/core/skbuff.c. Rename a couple of types in xdr.h to adhere to this convention. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean-up: eliminate xs_tcp_copy_data -- it's exactly the same logic as the common routine skb_read_bits. The UDP and TCP socket read code now share the same routine for copying data into an xdr_buf. Now that skb_read_bits() is exported, rename it to avoid confusing it with a generic skb_* function. As these functions are XDR-specific, they should not have names that suggest they are of generic use. Also rename skb_read_and_csum_bits() to be consistent. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
For now we will assume that all transports will use the address format buffers in the rpc_xprt struct to store their addresses. Change rpc_peer2str() to be a generic routine to handle this, and get rid of the print_address() op in the rpc_xprt_ops vector. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Move the three fields for saving socket callback functions out of the rpc_xprt structure and into a private data structure maintained in net/sunrpc/xprtsock.c. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Move the socket-specific buffer size parameters for UDP sockets to a private data structure maintained in net/sunrpc/xprtsock.c. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Move the socket-specific connection management fields out of the generic rpc_xprt structure into a private data structure maintained in net/sunrpc/xprtsock.c. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Move "XPRT_LAST_FRAG" and friends from xprt.h into xprtsock.c, and rename them to use the naming scheme in use in xprtsock.c. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Move the TCP receive state variables from the generic rpc_xprt structure to a private structure maintained inside net/sunrpc/xprtsock.c. Also rename a function/variable pair to refer to RPC fragment headers instead of record markers, to be consistent with types defined in sunrpc/*.h. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
The "sock" and "inet" fields are socket-specific. Move them to a private data structure maintained entirely within net/sunrpc/xprtsock.c Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
When setting up a new transport instance, allocate enough memory for an rpc_xprt and a private area. As part of the same memory allocation, it will be easy to find one, given a pointer to the other. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Change the location where the rpc_xprt structure is allocated so each transport implementation can allocate a private area from the same chunk of memory. Note also that xprt->ops->destroy, rather than xprt_destroy, is now responsible for freeing rpc_xprt when the transport is destroyed. Test plan: Connectathon. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-