definition is moved to common header. x86_64 version is now called
native_smp_prepare_cpus
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

definition is moved to common header. x86_64 version is now called
native_prepare_boot_cpu
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

function definition is moved to common header. x86_64 version
is now called native_cpu_up
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

definition is moved to common header, x86_64 function name
now is native_smp_call_function_mask
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

function definition is moved to common header, x86_64 version is now called
native_smp_send_reschedule
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

the smp_ops symbol is temporarily defined in smp_64.c, but it will soon
be unified
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

x86_64 will benefit from it
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

move extern definitions that are the same between smp_{32,64}.h
to smp.h
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

move extern function definitions that are the same between smp_{32,64}.h
to smp.h
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

this is the first step of integrating smp.h between x86_64
and i386
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Liu Pingfan noticed that switch_to() clobbers more registers than its
asm constraints specify.

We get away with this due to luck mostly - schedule()
by its nature only has 'local' state which gets reloaded
automatically. Fix it nevertheless, we could hit this anytime.

it turns out that with the extra constraints gcc manages to make
schedule() even more compact:

   text	   data	    bss	    dec	    hex	filename
  28626	    684	   2640	  31950	   7cce	sched.o.before
  28613	    684	   2640	  31937	   7cc1	sched.o.after
Reported-by: NLiu Pingfan <kernelfans@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Make the code more readable and more hackable:

 - use symbolic asm parameters
 - use readable indentation
 - add comments that explains the details

No code changed:

kernel/sched.o:

   text	   data	    bss	    dec	    hex	filename
  28626	    684	   2640	  31950	   7cce	sched.o.before
  28626	    684	   2640	  31950	   7cce	sched.o.after

md5:
   2823d406c18b781975cdb2e7cfea0059  sched.o.before.asm
   2823d406c18b781975cdb2e7cfea0059  sched.o.after.asm
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Jeremy Fitzhardinge pointed out that looking at the boot_params
struct to determine if the system is running in a paravirtual
environment is not reliable for the Xen case, currently. He also
points out that there already exists a function to determine if
the system is running in a paravirtual environment. So let's use
that instead. This gets rid of the preprocessor test too.
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Jeremy Fitzhardinge pointed out that looking at the boot_params
struct to determine if the system is running in a paravirtual
environment is not reliable for the Xen case, currently. He also
points out that there already exists a function to determine if
the system is running in a paravirtual environment. So let's use
that instead. This gets rid of the preprocessor test too.
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Comment says wmb is a nop, but it is implemented as lock addl
below... Should it be compiled to nop if we know we are running on
"good" Intel cpu?

At least remove confusing comment for now.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The current tsc_init() clears the TSC feature bit if the TSC khz
cannot be calculated, causing us to panic in
arch/x86/kernel/cpu/bugs.c check_config().  We should simply mark it
unstable.

Frankly, someone should take an axe to this code.  mark_tsc_unstable()
not only marks it unstable, but sets tsc_enabled to 0, which seems
redundant but is actually important here because means it won't be
used by sched_clock() either.  Perhaps a tristate enum "UNUSABLE,
UNSTABLE, OK" would be clearer, and separate mark_tsc_unstable() and
mark_tsc_broken() functions?
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NIngo Molnar <mingo@elte.hu>

redo commit cded932b.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch is an add-on to the 64-bit ebda patch. It makes
the functions reserve_ebda_region (renamed from reserve_ebda)
and copy_e820_map equal to the 32-bit versions of the previous
patch.

Changes:

Use u64 and u32 for local variables in copy_e820_map.

The amount of conventional memory and the start of the EBDA are
detected by reading the BIOS data area directly. Paravirtual
environments do not provide this area, so we bail out early
in that case. They will just have to set up a correct memory
map to start with.

Add a safety net for zeroed out BIOS data area.
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Explicitly reserve_early the whole address range from the end of
conventional memory as reported by the bios data area up to the
1Mb mark. Regard the info retrieved from the BIOS data area with
a bit of paranoia, though, because some biosses forget to register
the EBDA correctly.
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds explicit detection of the EBDA and reservation
of the rom and adapter address space 0xa0000-0x100000 to the
i386 kernels. Before this patch, the EBDA size was hardcoded
as 4Kb. Also, the reservation of the adapter range was done by
modifying the e820 map which is now not necessary any longer,
and that code is removed from copy_e820_map.

The amount of conventional memory and the start of the EBDA are
detected by reading the BIOS data area directly. Paravirtual
environments do not provide this area, so we bail out early
in that case. They will just have to set up a correct memory
map to start with.
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The proper dependency check uncovered a few dependency problems,
the subarchitecture used a mixture of selects and depends on SMP
and PCI dependency was messed up.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Change iret implementation to not be dependent on direct-access vcpu
structure.
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Depends on:
[PATCH 2/3] x86: coding style fixes to arch/x86/kernel/early_printk.c

Remove two:
ERROR: do not initialise statics to 0 or NULL

paolo@paolo-desktop:/tmp/c$ size *
   text    data     bss     dec     hex filename
   1172     280      12    1464     5b8 early_printk.o.after
   1172     280      12    1464     5b8 early_printk.o.before

This patch is changing the binary output:

paolo@paolo-desktop:/tmp/c$ md5sum *
dad9a9a881e0eeda62cc5645bd3d7cad  early_printk.o.after
da32f5cd8f248970e4809e1005393e95  early_printk.o.before

because the two variables moved to another section. No
change in functionality.
Signed-off-by: NPaolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Before:
total: 17 errors, 3 warnings, 254 lines checked

After:
total: 2 errors, 3 warnings, 254 lines checked

paolo@paolo-desktop:/tmp/b$ md5sum *
da32f5cd8f248970e4809e1005393e95  early_printk.o.after
da32f5cd8f248970e4809e1005393e95  early_printk.o.before

paolo@paolo-desktop:/tmp/b$ size *
   text    data     bss     dec     hex filename
   1172     280      12    1464     5b8 early_printk.o.after
   1172     280      12    1464     5b8 early_printk.o.befor
Signed-off-by: NPaolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Before:
 total: 63 errors, 2 warnings, 878 lines checked
After:
 total: 0 errors, 2 warnings, 878 lines checked

Compile tested, no change in the binary output:

text    data     bss     dec     hex filename
3231       0       0    3231     c9f usercopy_32.o.after
3231       0       0    3231     c9f usercopy_32.o.before

md5sum:
9f9a3eb43970359ae7cecfd1c9e7cf42  usercopy_32.o.after
9f9a3eb43970359ae7cecfd1c9e7cf42  usercopy_32.o.before
Signed-off-by: NPaolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Suggested by Jan Beulich.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NJan Beulich <jbeulich@novell.com>

X86_HT is used for hyperthreading or multicore on 32-bit.
The X86_HT on 64-bit is different from 32-bit, it means hyperthreading only.
And X86_HT is not used on 64-bit except from cpu/initel_cacheinfo.c.

Unify X86_HT for hyperthreading or multicore.
Turn X86_HT on when X86_64 and SMP are enabled.
Signed-off-by: NHiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Roland Dreier reported in http://lkml.org/lkml/2008/2/27/194

[ 8425.915139] BUG: unable to handle kernel paging request at ffffc20001a0a000
[ 8425.919087] IP: [<ffffffff8021dacc>] clflush_cache_range+0xc/0x25
[ 8425.919087] PGD 1bf80e067 PUD 1bf80f067 PMD 1bb497067 PTE 80000047000ee17b

This is on a Intel machine with 36bit physical address space. The PTE
entry references 47000ee000, which is outside of it.

Add a check for the physical address space and warn/printk about the
stupid caller.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This makes the Xen console just work.  Before, you had to ask for it
on the kernel command line with console=hvc0
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

notrace signals that a function should not be traced. Most of the
time this is used by tracers to annotate code that cannot be
traced - it's in a volatile state (such as in user vdso context
or NMI context) or it's in the tracer internals.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Before:
   total: 86 errors, 29 warnings, 1248 lines checked
After:
   total: 0 errors, 17 warnings, 1281 lines checked

No code changed:

arch/x86/kernel/traps_32.o:

   text	   data	    bss	    dec	    hex	filename
   8711	   2168	     72	  10951	   2ac7	traps_32.o.before
   8711	   2168	     72	  10951	   2ac7	traps_32.o.after

(md5 sums differ because some stack offset positions changed.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NIngo Molnar <mingo@elte.hu>