Remove 'q' from arguments since it is not used anymore after
commit 7e992f84 ("block: remove non mq parts from the
flush code").
Signed-off-by: NGuoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Both cmd and sense had been moved to scsi_request, so remove
the related comments to avoid confusion.

And as Bart suggested, move _blk_rq_prep_clone into the only
caller (blk_rq_prep_clone).
Signed-off-by: NGuoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Previously, blk_cleanup_queue has called blk_set_queue_dying to set the
flag, no need to do it again.
Signed-off-by: NGuoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Use the two functions to simplify code.
Signed-off-by: NGuoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Since the later description mentioned "checked against the new queue
limits", so make the change to avoid confusion.
Signed-off-by: NGuoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There is a potential race between ioc_release_fn() and
ioc_clear_queue() as shown below, due to which below kernel
crash is observed. It also can result into use-after-free
issue.

context#1:				context#2:
ioc_release_fn()			__ioc_clear_queue() gets the same icq
->spin_lock(&ioc->lock);		->spin_lock(&ioc->lock);
->ioc_destroy_icq(icq);
  ->list_del_init(&icq->q_node);
  ->call_rcu(&icq->__rcu_head,
  	icq_free_icq_rcu);
->spin_unlock(&ioc->lock);
					->ioc_destroy_icq(icq);
					  ->hlist_del_init(&icq->ioc_node);
					  This results into below crash as this memory
					  is now used by icq->__rcu_head in context#1.
					  There is a chance that icq could be free'd
					  as well.

22150.386550:   <6> Unable to handle kernel write to read-only memory
at virtual address ffffffaa8d31ca50
...
Call trace:
22150.607350:   <2>  ioc_destroy_icq+0x44/0x110
22150.611202:   <2>  ioc_clear_queue+0xac/0x148
22150.615056:   <2>  blk_cleanup_queue+0x11c/0x1a0
22150.619174:   <2>  __scsi_remove_device+0xdc/0x128
22150.623465:   <2>  scsi_forget_host+0x2c/0x78
22150.627315:   <2>  scsi_remove_host+0x7c/0x2a0
22150.631257:   <2>  usb_stor_disconnect+0x74/0xc8
22150.635371:   <2>  usb_unbind_interface+0xc8/0x278
22150.639665:   <2>  device_release_driver_internal+0x198/0x250
22150.644897:   <2>  device_release_driver+0x24/0x30
22150.649176:   <2>  bus_remove_device+0xec/0x140
22150.653204:   <2>  device_del+0x270/0x460
22150.656712:   <2>  usb_disable_device+0x120/0x390
22150.660918:   <2>  usb_disconnect+0xf4/0x2e0
22150.664684:   <2>  hub_event+0xd70/0x17e8
22150.668197:   <2>  process_one_work+0x210/0x480
22150.672222:   <2>  worker_thread+0x32c/0x4c8

Fix this by adding a new ICQ_DESTROYED flag in ioc_destroy_icq() to
indicate this icq is once marked as destroyed. Also, ensure
__ioc_clear_queue() is accessing icq within rcu_read_lock/unlock so
that icq doesn't get free'd up while it is still using it.
Signed-off-by: NSahitya Tummala <stummala@codeaurora.org>
Co-developed-by: NPradeep P V K <ppvk@codeaurora.org>
Signed-off-by: NPradeep P V K <ppvk@codeaurora.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This makes it possible to test the error path in blk_mq_realloc_hw_ctxs()
and also several error paths in null_blk.
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If null_add_dev() fails then null_del_dev() is called with a NULL argument.
Make null_del_dev() handle this scenario correctly. This patch fixes the
following KASAN complaint:

null-ptr-deref in null_del_dev+0x28/0x280 [null_blk]
Read of size 8 at addr 0000000000000000 by task find/1062

Call Trace:
 dump_stack+0xa5/0xe6
 __kasan_report.cold+0x65/0x99
 kasan_report+0x16/0x20
 __asan_load8+0x58/0x90
 null_del_dev+0x28/0x280 [null_blk]
 nullb_group_drop_item+0x7e/0xa0 [null_blk]
 client_drop_item+0x53/0x80 [configfs]
 configfs_rmdir+0x395/0x4e0 [configfs]
 vfs_rmdir+0xb6/0x220
 do_rmdir+0x238/0x2c0
 __x64_sys_unlinkat+0x75/0x90
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If null_add_dev() fails, clear dev->nullb.

This patch fixes the following KASAN complaint:

BUG: KASAN: use-after-free in nullb_device_submit_queues_store+0xcf/0x160 [null_blk]
Read of size 8 at addr ffff88803280fc30 by task check/8409

Call Trace:
 dump_stack+0xa5/0xe6
 print_address_description.constprop.0+0x26/0x260
 __kasan_report.cold+0x7b/0x99
 kasan_report+0x16/0x20
 __asan_load8+0x58/0x90
 nullb_device_submit_queues_store+0xcf/0x160 [null_blk]
 configfs_write_file+0x1c4/0x250 [configfs]
 __vfs_write+0x4c/0x90
 vfs_write+0x145/0x2c0
 ksys_write+0xd7/0x180
 __x64_sys_write+0x47/0x50
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7ff370926317
Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007fff2dd2da48 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007ff370926317
RDX: 0000000000000002 RSI: 0000559437ef23f0 RDI: 0000000000000001
RBP: 0000559437ef23f0 R08: 000000000000000a R09: 0000000000000001
R10: 0000559436703471 R11: 0000000000000246 R12: 0000000000000002
R13: 00007ff370a006a0 R14: 00007ff370a014a0 R15: 00007ff370a008a0

Allocated by task 8409:
 save_stack+0x23/0x90
 __kasan_kmalloc.constprop.0+0xcf/0xe0
 kasan_kmalloc+0xd/0x10
 kmem_cache_alloc_node_trace+0x129/0x4c0
 null_add_dev+0x24a/0xe90 [null_blk]
 nullb_device_power_store+0x1b6/0x270 [null_blk]
 configfs_write_file+0x1c4/0x250 [configfs]
 __vfs_write+0x4c/0x90
 vfs_write+0x145/0x2c0
 ksys_write+0xd7/0x180
 __x64_sys_write+0x47/0x50
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 8409:
 save_stack+0x23/0x90
 __kasan_slab_free+0x112/0x160
 kasan_slab_free+0x12/0x20
 kfree+0xdf/0x250
 null_add_dev+0xaf3/0xe90 [null_blk]
 nullb_device_power_store+0x1b6/0x270 [null_blk]
 configfs_write_file+0x1c4/0x250 [configfs]
 __vfs_write+0x4c/0x90
 vfs_write+0x145/0x2c0
 ksys_write+0xd7/0x180
 __x64_sys_write+0x47/0x50
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 2984c868 ("nullb: factor disk parameters")
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Instead of initializing null_blk hardware queues explicitly after the
request queue has been created, provide .init_hctx() and .exit_hctx()
callback functions. The latter functions are not only called during
request queue allocation but also when the number of hardware queues
changes. Allocate nr_cpu_ids queues during initialization to support
increasing the number of hardware queues above the initial hardware
queue count.

This change fixes increasing the number of hardware queues above the
initial number of hardware queues and also keeps nullb->nr_queues in
sync with the number of hardware queues.

Fixes: 45919fbf ("null_blk: Enable modifying 'submit_queues' after an instance has been configured")
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Although it is not clear to me why UBSAN complains when 'memory_backed'
is set, this patch suppresses the UBSAN complaint that is triggered when
setting that configfs attribute.

UBSAN: Undefined behaviour in drivers/block/null_blk_main.c:327:1
load of value 16 is not a valid value for type '_Bool'
CPU: 2 PID: 8396 Comm: check Not tainted 5.6.0-rc1-dbg+ #14
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
 dump_stack+0xa5/0xe6
 ubsan_epilogue+0x9/0x26
 __ubsan_handle_load_invalid_value+0x6d/0x76
 nullb_device_memory_backed_store.cold+0x2c/0x38 [null_blk]
 configfs_write_file+0x1c4/0x250 [configfs]
 __vfs_write+0x4c/0x90
 vfs_write+0x145/0x2c0
 ksys_write+0xd7/0x180
 __x64_sys_write+0x47/0x50
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

q->nr_hw_queues must only be updated once it is known that
blk_mq_realloc_hw_ctxs() has succeeded. Otherwise it can happen that
reallocation fails and that q->nr_hw_queues is larger than the number of
allocated hardware queues. This patch fixes the following crash if
increasing the number of hardware queues fails:

BUG: KASAN: null-ptr-deref in blk_mq_map_swqueue+0x775/0x810
Write of size 8 at addr 0000000000000118 by task check/977

CPU: 3 PID: 977 Comm: check Not tainted 5.6.0-rc1-dbg+ #8
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
 dump_stack+0xa5/0xe6
 __kasan_report.cold+0x65/0x99
 kasan_report+0x16/0x20
 check_memory_region+0x140/0x1b0
 memset+0x28/0x40
 blk_mq_map_swqueue+0x775/0x810
 blk_mq_update_nr_hw_queues+0x468/0x710
 nullb_device_submit_queues_store+0xf7/0x1a0 [null_blk]
 configfs_write_file+0x1c4/0x250 [configfs]
 __vfs_write+0x4c/0x90
 vfs_write+0x145/0x2c0
 ksys_write+0xd7/0x180
 __x64_sys_write+0x47/0x50
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: ac0d6b92 ("block: Reduce the amount of memory required per request queue")
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blk_mq_map_queues() and multiple .map_queues() implementations expect that
set->map[HCTX_TYPE_DEFAULT].nr_queues is set to the number of hardware
queues. Hence set .nr_queues before calling these functions. This patch
fixes the following kernel warning:

WARNING: CPU: 0 PID: 2501 at include/linux/cpumask.h:137
Call Trace:
 blk_mq_run_hw_queue+0x19d/0x350 block/blk-mq.c:1508
 blk_mq_run_hw_queues+0x112/0x1a0 block/blk-mq.c:1525
 blk_mq_requeue_work+0x502/0x780 block/blk-mq.c:775
 process_one_work+0x9af/0x1740 kernel/workqueue.c:2269
 worker_thread+0x98/0xe40 kernel/workqueue.c:2415
 kthread+0x361/0x430 kernel/kthread.c:255

Fixes: ed76e329 ("blk-mq: abstract out queue map") # v5.0
Reported-by: syzbot+d44e1b26ce5c3e77458d@syzkaller.appspotmail.com
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The 'hctx_list' member of struct blk_mq_hw_ctx is not a list head but
instead an entry in q->unused_hctx_list. Fix the comment above this
struct member.

Fixes: d386732b ("blk-mq: fill header with kernel-doc")
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: André Almeida <andrealmeid@collabora.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Pull ARM SoC fixes from Olof Johansson:
 "We've been accruing these for a couple of weeks, so the batch is a bit
  bigger than usual.

  Largest delta is due to a led-bl driver that is added -- there was a
  miscommunication before the merge window and the driver didn't make it
  in. Due to this, the platforms needing it regressed. At this point, it
  seemed easier to add the new driver than unwind the changes.

  Besides that, there are a handful of various fixes:

   - AMD tee memory leak fix

   - A handful of fixlets for i.MX SCU communication

   - A few maintainers woke up and realized DEBUG_FS had been missing
     for a while, so a few updates of that.

  ... and the usual collection of smaller fixes to various platforms"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (37 commits)
  ARM: socfpga_defconfig: Add back DEBUG_FS
  arm64: dts: socfpga: agilex: Fix gmac compatible
  ARM: bcm2835_defconfig: Explicitly restore CONFIG_DEBUG_FS
  arm64: dts: meson: fix gxm-khadas-vim2 wifi
  arm64: dts: meson-sm1-sei610: add missing interrupt-names
  ARM: meson: Drop unneeded select of COMMON_CLK
  ARM: dts: bcm2711: Add pcie0 alias
  ARM: dts: bcm283x: Add missing properties to the PWR LED
  tee: amdtee: fix memory leak in amdtee_open_session()
  ARM: OMAP2+: Fix compile if CONFIG_HAVE_ARM_SMCCC is not set
  arm: dts: dra76x: Fix mmc3 max-frequency
  ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes
  bus: ti-sysc: Fix 1-wire reset quirk
  ARM: dts: r8a7779: Remove deprecated "renesas, rcar-sata" compatible value
  soc: imx-scu: Align imx sc msg structs to 4
  firmware: imx: Align imx_sc_msg_req_cpu_start to 4
  firmware: imx: scu-pd: Align imx sc msg structs to 4
  firmware: imx: misc: Align imx sc msg structs to 4
  firmware: imx: scu: Ensure sequential TX
  ARM: dts: imx7-colibri: Fix frequency for sd/mmc
  ...

Pull EDAC fix from Borislav Petkov:
 "Error reporting fix for synopsys_edac: do not overwrite partial
  decoded error message (Sherry Sun)"

* tag 'edac_urgent-2020-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/synopsys: Do not print an error with back-to-back snprintf() calls

Pull char/misc fixes from Greg KH:
 "Here are four small char/misc driver fixes for reported issues for
  5.6-rc5.

  These fixes are:

   - binder fix for a potential use-after-free problem found (took two
     tries to get it right)

   - interconnect core fix

   - altera-stapl driver fix

  All four of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  binder: prevent UAF for binderfs devices II
  interconnect: Handle memory allocation errors
  altera-stapl: altera_get_note: prevent write beyond end of 'key'
  binder: prevent UAF for binderfs devices

Pull driver core and debugfs fixes from Greg KH:
 "Here are four small driver core / debugfs patches for 5.6-rc3:

   - debugfs api cleanup now that all debugfs_create_regset32() callers
     have been fixed up. This was waiting until after the -rc1 merge as
     these fixes came in through different trees

   - driver core sync state fixes based on reports of minor issues found
     in the feature

  All of these have been in linux-next with no reported issues"

* tag 'driver-core-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: Skip unnecessary work when device doesn't have sync_state()
  driver core: Add dev_has_sync_state()
  driver core: Call sync_state() even if supplier has no consumers
  debugfs: remove return value of debugfs_create_regset32()

Pull tty/serial fixes from Greg KH:
 "Here are some small tty/serial fixes for 5.6-rc5

  Just some small serial driver fixes, and a vt core fixup, full details
  are:

   - vt fixes for issues found by syzbot

   - serdev fix for Apple boxes

   - fsl_lpuart serial driver fixes

   - MAINTAINER update for incorrect serial files

   - new device ids for 8250_exar driver

   - mvebu-uart fix

  All of these have been in linux-next with no reported issues"

* tag 'tty-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: fsl_lpuart: free IDs allocated by IDA
  Revert "tty: serial: fsl_lpuart: drop EARLYCON_DECLARE"
  serdev: Fix detection of UART devices on Apple machines.
  MAINTAINERS: Add missed files related to Synopsys DesignWare UART
  serial: 8250_exar: add support for ACCES cards
  tty:serial:mvebu-uart:fix a wrong return
  vt: selection, push sel_lock up
  vt: selection, push console lock down

Pull USB/PHY fixes from Greg KH:
 "Here are some small USB and PHY driver fixes for reported issues for
  5.6-rc5.

  Included in here are:

   - phy driver fixes

   - new USB quirks

   - USB cdns3 gadget driver fixes

   - USB hub core fixes

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: dwc3: gadget: Update chain bit correctly when using sg list
  usb: core: port: do error out if usb_autopm_get_interface() fails
  usb: core: hub: do error out if usb_autopm_get_interface() fails
  usb: core: hub: fix unhandled return by employing a void function
  usb: storage: Add quirk for Samsung Fit flash
  usb: quirks: add NO_LPM quirk for Logitech Screen Share
  usb: usb251xb: fix regulator probe and error handling
  phy: allwinner: Fix GENMASK misuse
  usb: cdns3: gadget: toggle cycle bit before reset endpoint
  usb: cdns3: gadget: link trb should point to next request
  phy: mapphone-mdm6600: Fix timeouts by adding wake-up handling
  phy: brcm-sata: Correct MDIO operations for 40nm platforms
  phy: ti: gmii-sel: do not fail in case of gmii
  phy: ti: gmii-sel: fix set of copy-paste errors
  phy: core: Fix phy_get() to not return error on link creation failure
  phy: mapphone-mdm6600: Fix write timeouts with shorter GPIO toggle interval

Pull rdma fixes from Jason Gunthorpe:
 "Nothing particularly exciting, some small ODP regressions from the mmu
  notifier rework, another bunch of syzkaller fixes, and a bug fix for a
  botched syzkaller fix in the first rc pull request.

   - Fix busted syzkaller fix in 'get_new_pps' - this turned out to
     crash on certain HW configurations

   - Bug fixes for various missed things in error unwinds

   - Add a missing rcu_read_lock annotation in hfi/qib

   - Fix two ODP related regressions from the recent mmu notifier
     changes

   - Several more syzkaller bugs in siw, RDMA netlink, verbs and iwcm

   - Revert an old patch in CMA as it is now shown to not be allocating
     port numbers properly"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/iwcm: Fix iwcm work deallocation
  RDMA/siw: Fix failure handling during device creation
  RDMA/nldev: Fix crash when set a QP to a new counter but QPN is missing
  RDMA/odp: Ensure the mm is still alive before creating an implicit child
  RDMA/core: Fix protection fault in ib_mr_pool_destroy
  IB/mlx5: Fix implicit ODP race
  IB/hfi1, qib: Ensure RCU is locked when accessing list
  RDMA/core: Fix pkey and port assignment in get_new_pps
  RMDA/cm: Fix missing ib_cm_destroy_id() in ib_cm_insert_listen()
  RDMA/rw: Fix error flow during RDMA context initialization
  RDMA/core: Fix use of logical OR in get_new_pps
  Revert "RDMA/cma: Simplify rdma_resolve_addr() error flow"

Pull io_uring fixes from Jens Axboe:
 "Here are a few io_uring fixes that should go into this release. This
  contains:

   - Removal of (now) unused io_wq_flush() and associated flag (Pavel)

   - Fix cancelation lockup with linked timeouts (Pavel)

   - Fix for potential use-after-free when freeing percpu ref for fixed
     file sets

   - io-wq cancelation fixups (Pavel)"

* tag 'io_uring-5.6-2020-03-07' of git://git.kernel.dk/linux-block:
  io_uring: fix lockup with timeouts
  io_uring: free fixed_file_data after RCU grace period
  io-wq: remove io_wq_flush and IO_WQ_WORK_INTERNAL
  io-wq: fix IO_WQ_WORK_NO_CANCEL cancellation

Pull block fixes from Jens Axboe:
 "Here are a few fixes that should go into this release. This contains:

   - Revert of a bad bcache patch from this merge window

   - Removed unused function (Daniel)

   - Fixup for the blktrace fix from Jan from this release (Cengiz)

   - Fix of deeper level bfqq overwrite in BFQ (Carlo)"

* tag 'block-5.6-2020-03-07' of git://git.kernel.dk/linux-block:
  block, bfq: fix overwrite of bfq_group pointer in bfq_find_set_group()
  blktrace: fix dereference after null check
  Revert "bcache: ignore pending signals when creating gc and allocator thread"
  block: Remove used kblockd_schedule_work_on()

Pull media fixes from Mauro Carvalho Chehab:

 - a fix for the media controller links in both hantro driver and in
   v4l2-mem2mem core

 - some fixes for the pulse8-cec driver

 - vicodec: handle alpha channel for RGB32 formats, as it may be used

 - mc-entity.c: fix handling of pad flags

* tag 'media/v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: hantro: Fix broken media controller links
  media: mc-entity.c: use & to check pad flags, not ==
  media: v4l2-mem2mem.c: fix broken links
  media: vicodec: process all 4 components for RGB32 formats
  media: pulse8-cec: close serio in disconnect, not adap_free
  media: pulse8-cec: INIT_DELAYED_WORK was called too late

There is a recipe to deadlock the kernel: submit a timeout sqe with a
linked_timeout (e.g.  test_single_link_timeout_ception() from liburing),
and SIGKILL the process.

Then, io_kill_timeouts() takes @ctx->completion_lock, but the timeout
isn't flagged with REQ_F_COMP_LOCKED, and will try to double grab it
during io_put_free() to cancel the linked timeout. Probably, the same
can happen with another io_kill_timeout() call site, that is
io_commit_cqring().
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Pull s390 fixes from Vasily Gorbik:

 - Fix panic in gup_fast on large pud by providing an implementation of
   pud_write. This has been overlooked during migration to common gup
   code.

 - Fix unexpected write combining on PCI stores.

* tag 's390-5.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: Fix unexpected write combine on resource
  s390/mm: fix panic in gup_fast on large pud

Pull powerpc fixes from Michael Ellerman:
 "Some more powerpc fixes for 5.6:

   - One fix for a recent regression to our breakpoint/watchpoint code.

   - Another fix for our KUAP support, this time a missing annotation in
     a rarely used path in signal handling.

   - A fix for our handling of a CPU feature that effects the PMU, when
     booting guests in some configurations.

   - A minor fix to our linker script to explicitly include the .BTF
     section.

  Thanks to: Christophe Leroy, Desnes A. Nunes do Rosario, Leonardo
  Bras, Naveen N. Rao, Ravi Bangoria, Stefan Berger"

* tag 'powerpc-5.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Fix missing KUAP disable in flush_coherent_icache()
  powerpc: fix hardware PMU exception bug on PowerVM compatibility mode systems
  powerpc: Include .BTF section
  powerpc/watchpoint: Don't call dar_within_range() for Book3S

Pull xen fixes from Juergen Gross:
 "Four fixes and a small cleanup patch:

   - two fixes by Dongli Zhang fixing races in the xenbus driver

   - two fixes by me fixing issues introduced in 5.6

   - a small cleanup by Gustavo Silva replacing a zero-length array with
     a flexible-array"

* tag 'for-linus-5.6b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/blkfront: fix ring info addressing
  xen/xenbus: fix locking
  xenbus: req->err should be updated before req->state
  xenbus: req->body should be updated before req->state
  xen: Replace zero-length array with flexible-array member

Pull thread fixes from Christian Brauner:
 "Here are a few hopefully uncontroversial fixes:

   - Use RCU_INIT_POINTER() when initializing rcu protected members in
     task_struct to fix sparse warnings.

   - Add pidfd_fdinfo_test binary to .gitignore file"

* tag 'for-linus-2020-03-07' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
  selftests: pidfd: Add pidfd_fdinfo_test in .gitignore
  exit: Fix Sparse errors and warnings
  fork: Use RCU_INIT_POINTER() instead of rcu_access_pointer()

Pull sound fixes from Takashi Iwai:
 "The regular "bump-in-the-middle" updates, containing mostly ASoC-
  related fixes at this time. All changes are reasonably small.

  A few entries are for ASoC and ALSA core parts (DAPM, PCM, topology)
  for followups of the recent changes and potential buffer overflow by
  snprintf(), while the rest are (both new and old) device-specific
  fixes for Intel, meson, tas2562, rt1015, as well as the usual HD-audio
  quirks"

* tag 'sound-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
  ALSA: sgio2audio: Remove usage of dropped hw_params/hw_free functions
  ALSA: hda/realtek - Enable the headset of ASUS B9450FA with ALC294
  ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Master
  ALSA: hda/realtek - Add Headset Button supported for ThinkPad X1
  ALSA: hda/realtek - Add Headset Mic supported
  ASoC: wm8741: Fix typo in Kconfig prompt
  ASoC: stm32: sai: manage rebind issue
  ASoC: SOF: Fix snd_sof_ipc_stream_posn()
  ASoC: rt1015: modify pre-divider for sysclk
  ASoC: rt1015: add operation callback function for rt1015_dai[]
  ASoC: soc-component: tidyup snd_soc_pcm_component_sync_stop()
  ASoC: dapm: Correct DAPM handling of active widgets during shutdown
  ASoC: tas2562: Fix sample rate error message
  ASoC: Intel: Skylake: Fix available clock counter incrementation
  ASoC: soc-pcm/soc-compress: don't use snd_soc_dapm_stream_stop()
  ASoC: meson: g12a: add tohdmitx reset
  ASoC: pcm512x: Fix unbalanced regulator enable call in probe error path
  ASoC: soc-core: fix for_rtd_codec_dai_rollback() macro
  ASoC: topology: Fix memleak in soc_tplg_manifest_load()
  ASoC: topology: Fix memleak in soc_tplg_link_elems_load()
  ...

Merge tag 'asoc-fix-v5.6-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.6

More fixes that have arrived since the merge window, spread out all
over.  There's a few things like the operation callback addition for
rt1015 and the meson reset addition which add small new bits of
functionality to fix non-working systems, they're all very small and for
parts of newly added functionality.

Merge tag 'linux-kselftest-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest update from Shuah Khan:
 "This consists of a cleanup patch to undo changes to global .gitignore
  that added selftests/lkdtm objects and add them to a local
  selftests/lkdtm/.gitignore.

  Summary of Linus's comments on local vs. global gitignore scope:

   - Keep local gitignore patterns in local files.

   - Put only global gitignore patterns in the top-level gitignore file.

  Local scope keeps things much better separated. It also incidentally
  means that if a directory gets renamed, the gitignore file continues
  to work unless in the case of renaming the actual files themselves
  that are named in the gitignore"

* tag 'linux-kselftest-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftest/lkdtm: Use local .gitignore

Pull RISC-V fixes from Palmer Dabbelt:
 "This contains a handful of fixes that I would like to target for 5.6:

   - A pair of fixes to module loading, which we hope solve the last of
     the issues with module text being loaded too sparsely for our call
     relocations.

   - A Kconfig fix that disallows selecting memory models not supported
     by NOMMU.

   - A series of Kconfig updates to ease selecting the drivers necessary
     to run on QEMU's virt platform.

   - DTS updates for SiFive's HiFive Unleashed.

   - A fix to our seccomp support that avoids mangling restartable
     syscalls"

* tag 'riscv-for-linus-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: fix seccomp reject syscall code path
  riscv: dts: Add GPIO reboot method to HiFive Unleashed DTS file
  RISC-V: Select Goldfish RTC driver for QEMU virt machine
  RISC-V: Select SYSCON Reboot and Poweroff for QEMU virt machine
  RISC-V: Enable QEMU virt machine support in defconfigs
  RISC-V: Add kconfig option for QEMU virt machine
  riscv: Fix range looking for kernel image memblock
  riscv: Force flat memory model with no-mmu
  riscv: Change code model of module to medany to improve data accessing
  riscv: avoid the PIC offset of static percpu data in module beyond 2G limits

This makes the script more convenient to run.
Signed-off-by: NJonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull devicetree fixes from Rob Herring:
 "Another batch of DT fixes. I think this should be the last of it, but
  sending pull requests seems to cause people to send more fixes.

  Summary:

   - Fixes for warnings introduced by hierarchical PSCI binding changes

   - Fixes for broken doc references due to DT schema conversions

   - Several grammar and typo fixes

   - Fix a bunch of dtc warnings in examples"

* tag 'devicetree-fixes-for-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: arm: Fixup the DT bindings for hierarchical PSCI states
  dt-bindings: power: Extend nodename pattern for power-domain providers
  MAINTAINERS: update ALLWINNER CPUFREQ DRIVER entry
  dt-bindings: bus: Drop empty compatible string in example
  dt-bindings: power: Convert domain-idle-states bindings to json-schema
  dt-bindings: arm: Fix cpu compatibles in the hierarchical example for PSCI
  dt-bindings: arm: Correct links to idle states definitions
  dt-bindings: mfd: Fix typo in file name of twl-familly.txt
  dt-bindings: mfd: tps65910: Improve grammar
  dt-bindings: mfd: zii,rave-sp: Fix a typo ("onborad")
  dt-bindings: arm: fsl: fix APF6Dev compatible
  dt-bindings: Fix dtc warnings in examples
  docs: dt: fix several broken doc references
  docs: dt: fix several broken references due to renames
  MAINTAINERS: clean up PCIE DRIVER FOR CAVIUM THUNDERX

Pull vgacon fix from Daniel Vetter:
 "One vgacon input check for stable"

* tag 'drm-fixes-2020-03-06-1' of git://anongit.freedesktop.org/drm/drm:
  vgacon: Fix a UAF in vgacon_invert_region

Pull btrfs fix from David Sterba:
 "One fixup for DIO when in use with the new checksums, a missed case
  where the checksum size was still assuming u32"

* tag 'for-5.6-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix RAID direct I/O reads with alternate csums

Pull file locking fixes from Jeff Layton:
 "Just a couple of late-breaking patches for the file locking code. The
  second patch (from yangerkun) fixes a rather nasty looking potential
  use-after-free that should go to stable.

  The other patch could technically wait for 5.7, but it's fairly
  innocuous so I figured we might as well take it"

* tag 'filelock-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  locks: fix a potential use-after-free problem when wakeup a waiter
  fcntl: Distribute switch variables for initialization

Pull spi fixes from Mark Brown:
 "A selection of small fixes, mostly for drivers, that have arrived
  since the merge window. None of them are earth shattering in
  themselves but all useful for affected systems"

* tag 'spi-fix-v5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi_register_controller(): free bus id on error paths
  spi: bcm63xx-hsspi: Really keep pll clk enabled
  spi: atmel-quadspi: fix possible MMIO window size overrun
  spi/zynqmp: remove entry that causes a cs glitch
  spi: pxa2xx: Add CS control clock quirk
  spi: spidev: Fix CS polarity if GPIO descriptors are used
  spi: qup: call spi_qup_pm_resume_runtime before suspending
  spi: spi-omap2-mcspi: Support probe deferral for DMA channels
  spi: spi-omap2-mcspi: Handle DMA size restriction on AM65x