This is the core.

Add all and default pointers on the netns_ipv4 and register
a new pernet subsys to initialize them.

Also add the ctl_table_header to register the
net.ipv4.ip_forward ctl.

I don't allocate additional memory for init_net, but use
global devinets.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some handers and strategies of devinet sysctl tables need
to know the net to propagate the ctl change to all the
net devices.

I use the (currently unused) extra2 pointer on the tables
to get it.

Holding the reference on the struct net is not possible,
because otherwise we'll get a net->ctl_table->net circular
dependency. But since the ctl tables are unregistered during
the net destruction, this is safe to get it w/o additional
protection.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, this function is void, so failures in creating
sysctls for new/renamed devices are not reported to anywhere.

Fixing this is another complex (needed?) task, but this
return value is needed during the namespaces creation to
handle the case, when we failed to create "all" and "default"
entries.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This includes:

 * moving neigh_sysctl_(un)register calls inside
   devinet_sysctl_(un)register ones, as they are always
   called in pairs;
 * making __devinet_sysctl_unregister() to unregister
   the ipv4_devconf struct, while original devinet_sysctl_unregister()
   works with the in_device to handle both - devconf and
   neigh sysctls;
 * make stubs for CONFIG_SYSCTL=n case to get rid of
   in-code ifdefs.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

AFAIS these two entries should do the same thing - change the
forwarding state on ipv4_devconf and on all the devices.

I propose to merge the handlers together using ctl paths.

The inet_forward_change() is static after this and I move
it higher to be closer to other "propagation" helpers and
to avoid diff making patches based on { and } matching :)
i.e. - make them easier to read.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This looks very much like the patch for neighbors.

The path is also located on the stack and is prepared
inside the function. This time, the call to the registering
function is guarded with the RTNL lock, but I decided
to keep it on the stack not to litter the devinet.c file
with unneeded names and to make it look similar to the
neighbors code.

This is also intended to help us with the net namespaces
and saves the vmlinux size as well - this time by more
than 670 bytes.

The difference from the first version is just the patch
offsets, that changed due to changes in the patch #2.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently this call is used to register sysctls for devices
and for the "default" confs. The "all" sysctls are registered
separately.

Besides, the inet_device is passed to this function, but it is
not needed there at all - just the device name and ifindex are
required.

Thanks to Herbert, who noticed, that this call doesn't even
require the devconf pointer (the last argument) - all we need
we can take from the in_device itself.

The fix is to make a __devinet_sysctl_register(), which registers
sysctls for all "devices" we need, including "default" and "all" :)

The original devinet_sysctl_register() works with struct net_device,
not the inet_device, and calls the introduced function, passing
the device name and ifindex (to be used as procname and ctl_name)
into it.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I moved the call to kmalloc() from the *t declaration into
the code (this is confusing when a variable is initialized
with the result of some call) and removed unneeded comment
near the error path. Just like I did with the neigh ctl-s.

Besides, I fixed the goto's and the labels - they were indented
with spaces :(
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After this patch none of the netlink callback support anything
except the initial network namespace but the rtnetlink infrastructure
now handles multiple network namespaces.

Changes from v2:
- IPv6 addrlabel processing

Changes from v1:
- no need for special rtnl_unlock handling
- fixed IPv6 ndisc
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Before I can enable rtnetlink to work in all network namespaces I need
to be certain that something won't break.  So this patch deliberately
disables all of the rtnletlink methods in everything except the
initial network namespace.  After the methods have been audited this
extra check can be disabled.

Changes from v1:
- added IPv6 addrlabel protection
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When re-naming an interface, the previous secondary address
labels get lost e.g.

  $> brctl addbr foo
  $> ip addr add 192.168.0.1 dev foo
  $> ip addr add 192.168.0.2 dev foo label foo:00
  $> ip addr show dev foo | grep inet
    inet 192.168.0.1/32 scope global foo
    inet 192.168.0.2/32 scope global foo:00
  $> ip link set foo name bar
  $> ip addr show dev bar | grep inet
    inet 192.168.0.1/32 scope global bar
    inet 192.168.0.2/32 scope global bar:2

Turns out to be a simple thinko in inetdev_changename() - clearly we
want to look at the address label, rather than the device name, for
a suffix to retain.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

According to Herbert, the ipv4_devconf_setall should be called
only when the ifa is added to the device. However, failed
ifa allocation may bring things into inconsistent state.

Move the call to ipv4_devconf_setall after the ifa allocation.

Fits both net-2.6 (with offsets) and net-2.6.25 (cleanly).
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that multiple loopback devices are becoming possible it makes
the code a little cleaner and more maintainable to test if a deivice
is th a loopback device by testing dev->flags & IFF_LOOPBACK instead
of dev == loopback_dev.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently we never call unregister_netdev for the loopback device so
it is impossible for us to reach inetdev_destroy with the loopback
device.  So the test in inetdev_destroy is unnecessary.

Further when testing with my network namespace patches removing
unregistering the loopback device and calling inetdev_destroy works
fine so there appears to be no reason for avoiding unregistering the
loopback device.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch replaces all occurences to the static variable
loopback_dev to a pointer loopback_dev. That provides the
mindless, trivial, uninteressting change part for the dynamic
allocation for the loopback.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com>
Acked-By: NKirill Korotaev <dev@sw.ru>
Acked-by: NBenjamin Thery <benjamin.thery@bull.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch makes most of the generic device layer network
namespace safe.  This patch makes dev_base_head a
network namespace variable, and then it picks up
a few associated variables.  The functions:
dev_getbyhwaddr
dev_getfirsthwbytype
dev_get_by_flags
dev_get_by_name
__dev_get_by_name
dev_get_by_index
__dev_get_by_index
dev_ioctl
dev_ethtool
dev_load
wireless_process_ioctl

were modified to take a network namespace argument, and
deal with it.

vlan_ioctl_set and brioctl_set were modified so their
hooks will receive a network namespace argument.

So basically anthing in the core of the network stack that was
affected to by the change of dev_base was modified to handle
multiple network namespaces.  The rest of the network stack was
simply modified to explicitly use &init_net the initial network
namespace.  This can be fixed when those components of the network
stack are modified to handle multiple network namespaces.

For now the ifindex generator is left global.

Fundametally ifindex numbers are per namespace, or else
we will have corner case problems with migration when
we get that far.

At the same time there are assumptions in the network stack
that the ifindex of a network device won't change.  Making
the ifindex number global seems a good compromise until
the network stack can cope with ifindex changes when
you change namespaces, and the like.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Every user of the network device notifiers is either a protocol
stack or a pseudo device.  If a protocol stack that does not have
support for multiple network namespaces receives an event for a
device that is not in the initial network namespace it quite possibly
can get confused and do the wrong thing.

To avoid problems until all of the protocol stacks are converted
this patch modifies all netdev event handlers to ignore events on
devices that are not in the initial network namespace.

As the rest of the code is made network namespace aware these
checks can be removed.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Bug: http://bugzilla.kernel.org/show_bug.cgi?id=8876

Not all ips are shown by "ip addr show" command when IPs number assigned to an
interface is more than 60-80 (in fact it depends on broadcast/label etc
presence on each address).

Steps to reproduce:
It's terribly simple to reproduce:

# for i in $(seq 1 100); do ip ad add 10.0.$i.1/24 dev eth10 ; done
# ip addr show

this will _not_ show all IPs.
Looks like the problem is in netlink/ipv4 message processing.

This is fix from bug submitter, it looks correct.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that netdev notifications can fail, we can use this to signal
errors during registration for IPv4/IPv6.  In particular, if we
fail to allocate memory for the inet device, we can fail the netdev
registration.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that we create idev before addresses are added, it no longer makes
sense to remove them when addresses are all deleted.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously inet devices were only constructed when addresses are added
(or rarely in ipmr).  Therefore the default config values they get are
the ones at the time of these operations.

Now that we're creating inet devices earlier, this changes the
behaviour of default config values in an incompatible way (see bug
#8519).

This patch creates a compromise by setting the default values at the
same point as before but only for those that have not been explicitly
set by the user since the inet device's creation.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously once inetdev_init has been called on a device any changes
made to ipv4_devconf_dflt would have no effect on that device's
configuration.

This creates a problem since we have moved the point where
inetdev_init is called from when an address is added to where the
device is registered.

This patch is the first half of a set that tries to mimic the old
behaviour while still calling inetdev_init.

It propagates any changes to ipv4_devconf_dflt to those devices that
have not had the corresponding attribute set.

The next patch will forcibly set all values at the point where
inetdev_init was previously called.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch converts the ipv4_devconf config members (everything except
sysctl) to an array.  This allows easier manipulation which will be
needed later on to provide better management of default config values.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When I made the inetdev_init call work on all devices I incorrectly
left in the panic call as well.  It is obviously undesirable to
panic on an allocation failure for a normal network device.  This
patch moves the panic call under the loopback if clause.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Cleanup of dev_base list use, with the aim to simplify making device
list per-namespace. In almost every occasion, use of dev_base variable
and dev->next pointer could be easily replaced by for_each_netdev
loop. A few most complicated places were converted to using
first_netdev()/next_netdev().
Signed-off-by: NPavel Emelianov <xemul@openvz.org>
Acked-by: NKirill Korotaev <dev@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since we're now holding the rtnl during the entire dump operation, we can
remove additional locking for rtnl protected data. This patch does that
for all simple cases (dev_base_lock for dev_base walking, RCU protection
for FIB rule dumping).
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add whitespace around keywords.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Return negative error value (embedded in the pointer) instead of
returning NULL.
Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch allocates inetdev at registration for all devices
in line with IPv6.  This allows sysctl configuration on the
devices to occur before they're brought up or addresses are
added.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

It isn't needed anymore, all of the users are gone, and all of the ctl_table
initializers have been converted to use explicit names of the fields they are
initializing.

[akpm@osdl.org: NTFS fix]
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The semantic effect of insert_at_head is that it would allow new registered
sysctl entries to override existing sysctl entries of the same name.  Which is
pain for caching and the proc interface never implemented.

I have done an audit and discovered that none of the current users of
register_sysctl care as (excpet for directories) they do not register
duplicate sysctl entries.

So this patch simply removes the support for overriding existing entries in
the sys_sysctl interface since no one uses it or cares and it makes future
enhancments harder.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Corey Minyard <minyard@acm.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: David Chinner <dgc@sgi.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).
Signed-off-by: NTim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently netlink users BUG when the allocated skb for an event
notification is undersized. While this is certainly a kernel bug,
its not critical and crashing the kernel is too drastic, especially
when considering that these errors have appeared multiple times in
the past and it BUGs even if no listeners are present.

This patch replaces BUG by WARN_ON and changes the notification
functions to inform potential listeners of undersized allocations
using a unique error code (EMSGSIZE).
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

inetdev_init out label moved after RCU assignment
(final suggestion by Herbert Xu)
Signed-off-by: NJarek Poplawski <jarkao2@o2.pl>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is important that we only assign dev->ip{,6}_ptr
only after all portions of the inet{,6} are setup.

Otherwise we can receive packets before the multicast
spinlocks et al. are initialized.
Signed-off-by: NDavid L Stevens <dlstevens@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Howells <dhowells@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Code diff stats:

[acme@newtoy net-2.6.20]$ codiff /tmp/devinet.o.before /tmp/devinet.o.after
/pub/scm/linux/kernel/git/acme/net-2.6.20/net/ipv4/devinet.c:
  devinet_sysctl_register |  -38
 1 function changed, 38 bytes removed
[acme@newtoy net-2.6.20]$
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>