The "template.id" variable is an enum and in this context GCC will
treat it as an unsigned int so it can never be less than zero.

Fixes: 8a978234 ("ASoC: topology: Add topology core")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20190925110624.GR3264@mwandaSigned-off-by: NMark Brown <broonie@kernel.org>

There were a couple places where the return value wasn't assigned so the
error handling wouldn't trigger.

Fixes: 5c0769af ("ASoC: soc-dai: add snd_soc_dai_bespoke_trigger()")
Fixes: 95aef355 ("ASoC: soc-dai: add snd_soc_dai_trigger()")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20190923142257.GB31251@mwandaSigned-off-by: NMark Brown <broonie@kernel.org>

In case of WM1811 device there are currently being registered controls
referring to registers not existing on that device.
It has been noticed when getting values of "AIF1ADC2 Volume", "AIF1DAC2
Volume" controls was failing during ALSA state restoring at boot time:
 "amixer: Mixer hw:0 load error: Device or resource busy"

Reading some registers through I2C was failing with EBUSY error and
indeed these registers were not available according to the datasheet.

To fix this controls not available on WM1811 are moved to a separate
array and registered only for WM8994 and WM8958.

There are some further differences between WM8994 and WM1811,
e.g. registers 603h, 604h, 605h, which are not covered in this patch.
Acked-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20190920130218.32690-2-s.nawrocki@samsung.comSigned-off-by: NMark Brown <broonie@kernel.org>

Ensure there is no OF node references kept when the driver
is removed/unbound.
Reviewed-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: NKrzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20190920130218.32690-3-s.nawrocki@samsung.comSigned-off-by: NMark Brown <broonie@kernel.org>

SND_SOC_DM365_VOICE_CODEC is a 'bool' option in a choice statement,
meaning it cannot be set to =m, but it selects two other drivers
that we may want to be loadable modules after all:

WARNING: unmet direct dependencies detected for SND_SOC_CQ0093VC
  Depends on [m]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m]
  Selected by [y]:
  - SND_SOC_DM365_VOICE_CODEC [=y] && <choice>
  Selected by [m]:
  - SND_SOC_ALL_CODECS [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && COMPILE_TEST [=y]

Add an intermediate symbol that sets SND_SOC_CQ0093VC and
MFD_DAVINCI_VOICECODEC to =m if SND_SOC=m.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190920075046.3210393-1-arnd@arndb.deSigned-off-by: NMark Brown <broonie@kernel.org>

24 bits is supported in all modes and 16 bit only when the codec is slave
and the DAI is set to RIGHT_J.

Remove the unsupported sample format.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190919071652.31724-1-peter.ujfalusi@ti.comSigned-off-by: NMark Brown <broonie@kernel.org>

commit a0a4bf57 ("ASoC: core: delete component->card_list in soc_remove_component only")
was trying to fix a kernel oops when list_del was called twice without
re-init the list. Use list_del_init() can solve it, too. Besides, it
will be more readable if we cleanup all component related resource at
soc_cleanup_component().
Suggested-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NBard liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20190918133131.15045-1-yung-chuan.liao@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

SSI need to use rsnd_channel_normalization() for TDM-split mode,
thus, channel check need to do after that.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874l1aw39d.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

A potential bug was reported in the email "[BUG] atmel_ssc_dai: a
possible sleep-in-atomic bug in atmel_ssc_shutdown"[1]

Indeed in the function atmel_ssc_shutdown() free_irq() was called in a
critical section protected by spinlock.

However this spinlock is only used in atmel_ssc_shutdown() and
atmel_ssc_startup() functions. After further analysis, it occurred that
the call to these function are already protected by mutex used on the
calling functions.

Then we can remove the spinlock which will fix this bug as a side
effect. Thanks to this patch the following message disappears:

"BUG: sleeping function called from invalid context at
kernel/locking/mutex.c:909"

[1]: https://www.spinics.net/lists/alsa-devel/msg71286.htmlReviewed-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20190918100344.23629-1-gregory.clement@bootlin.comSigned-off-by: NMark Brown <broonie@kernel.org>

We add component->card_list in the end of soc_probe_component(). In
other words, component->card_list will not be added if there is an
error in the soc_probe_component() function. So we can't delete
component->card_list in the error handling of soc_probe_component().

Fixes: 22d14231 ("ASoC: soc-core: add soc_cleanup_component()")
Signed-off-by: NBard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190916210353.6318-1-yung-chuan.liao@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

EDMA requires the period size to be multiple of maxburst. Otherwise the
remaining bytes are not transferred and thus noise is produced.

We can handle this issue by adding a constraint on
SNDRV_PCM_HW_PARAM_PERIOD_SIZE to be multiple of tx/rx maxburst value.
Signed-off-by: NMihai Serban <mihai.serban@nxp.com>
Signed-off-by: NDaniel Baluta <daniel.baluta@nxp.com>
Acked-by: NNicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20190913192807.8423-2-daniel.baluta@nxp.comSigned-off-by: NMark Brown <broonie@kernel.org>

Remove excess semicolon after closing parenthesis.
Signed-off-by: NSaiyam Doshi <saiyamdoshi.in@gmail.com>
Link: https://lore.kernel.org/r/20190914031133.GA28447@SDSigned-off-by: NMark Brown <broonie@kernel.org>

This is to allow machine drivers to set a certain bitclk rate
which might not be exactly rate * frame size.

Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: NViorel Suman <viorel.suman@nxp.com>
Signed-off-by: NDaniel Baluta <daniel.baluta@nxp.com>
Acked-by: NNicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20190830215910.31590-1-daniel.baluta@nxp.comSigned-off-by: NMark Brown <broonie@kernel.org>

All these functions declares and initializes variable ret with
'0' and without modifying 'ret' variable, it is returned.

This patch removes this redundancy and returns '0' directly.
Signed-off-by: NSaiyam Doshi <saiyamdoshi.in@gmail.com>
Link: https://lore.kernel.org/r/20190909174541.GA22718@SDSigned-off-by: NMark Brown <broonie@kernel.org>

Add an op in hdmi_codec_ops so codec driver can register callback
function to handle plug event.

Driver in DRM can use this callback function to report connector status.
Signed-off-by: NCheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20190717083327.47646-2-cychiang@chromium.orgReviewed-by: NTzung-Bi Shih <tzungbi@google.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Instead of clearing RT5677_PWR_ANLG2 (MX-64h) to 0 at SND_SOC_BIAS_OFF,
we only clear the RT5677_PWR_CORE bit which is set at SND_SOC_BIAS_PREPARE.
MICBIAS control bits are left unchanged.

This fixed the bug where if MICBIAS1 widget is forced on, MICBIAS
control bits will be cleared at suspend and never turned back on again,
since DAPM thinks the widget is always on.
Signed-off-by: NBen Zhang <benzh@chromium.org>
Signed-off-by: NCurtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20190906194636.217881-3-cujomalainey@chromium.orgSigned-off-by: NMark Brown <broonie@kernel.org>

In order to simplify understanding what register values are being
written to the codec for debugging more advanced features (such as
hotwording) it is best to remove magic numbers
Signed-off-by: NCurtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20190906194636.217881-2-cujomalainey@chromium.orgSigned-off-by: NMark Brown <broonie@kernel.org>

Current soc_unbind_aux_dev() implementation is very half,
thus it is very unreadable.

	for_each_comp_order(order) {
		for_each_card_auxs_safe(card, comp, _comp) {

(1)			if (comp->driver->remove_order == order) {
				...
=>				soc_unbind_aux_dev(comp);
			}
	}

soc_unbind_aux_dev() itself is not related to remove_order (1).
And, it is called from soc_remove_aux_devices(), even though
its paired function soc_bind_aux_dev() is called from
snd_soc_instantiate_card().
It is very unbalance, and very difficult to understand.

This patch do
1) update soc_bind_aux_dev() to self contained
2) call it from soc_cleanup_card_resources() to make up balance
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r24wor0z.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.

soc-core.c has soc_bind_aux_dev(), but, there is no its paired
soc_unbind_aux_dev().
This patch adds soc_unbind_aux_dev().
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sgpcor14.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current soc_bind_aux_dev() implementation is very half,
thus it is very unreadable.

	for_each_card_pre_auxs(xxx) {
=>		ret = soc_bind_aux_dev(xxx);
		...
	}

This patch does all for_each_xxx() under soc_bind_aux_dev(),
and makes it to self contained.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tv9sor1b.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.

This patch moves soc_probe_link_dais() next to soc_remove_link_dais()
which is paired function.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v9u8or1g.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current soc_probe_link_dais() implementation is very half,
thus it is very difficult to read.

	for_each_comp_order(xxx) {
		for_each_card_rtds(xxx)
=>			soc_probe_link_dais(xxx);
	}

This patch does all for_each_xxx() under soc_probe_link_dais(),
and makes it to self contained.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87woeoor1m.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current soc_probe_link_dais() (1) is called under probe_order (2),
and it will initialize dai_link related settings at *Last* turn (3)(B).
It is very complex code.

	static int soc_probe_link_dais(..., order)
	{
(A)		/* probe DAIs here */
		...

(3)		if (order != SND_SOC_COMP_ORDER_LAST)
			return 0;

(B)		/* initialize dai_link related settings */
		...
	}

	static int snd_soc_instantiate_card(...)
	{
		...
(2)		for_each_comp_order(order) {
			for_each_card_rtds(...) {
(1)				ret = soc_probe_link_dais(..., order);
			}
		}
	}

This patch separes soc_probe_link_dais() into "DAI probe" portion (A),
and dai_link settings portion (B).
The later is named as soc_link_init() by this patch.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2z4or1r.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.

This patch moves soc_probe_dai() next to soc_remove_dai() which is
paired function.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zhjkor1x.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current soc_remove_link_dais() implementation is very half,
thus it is very difficult to read.

	for_each_comp_order(xxx) {
		for_each_card_rtds(xxx)
=>			soc_remove_link_dais(xxx);
	}

This patch does all for_each_xxx() under soc_remove_link_dais(),
and makes it to self contained.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871rwwq5mm.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current soc_remove_link_components() implementation is very half,
thus it is very difficult to read.

	for_each_comp_order(xxx) {
		for_each_card_rtds(xxx)
=>			soc_remove_link_components(xxx);
	}

This patch does all for_each_xxx() under soc_remove_link_components(),
and makes it to self contained.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8736hcq5ms.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Current soc_probe_link_components() implementation is very half,
thus it is very difficult to read.

	for_each_comp_order(xxx) {
		for_each_card_rtds(xxx) {
=>			ret = soc_probe_link_components(xxx);
			...
		}
	}

This patch does all for_each_xxx() under soc_probe_link_components(),
and makes it to self contained.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874l1sq5mx.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Don't populate the array pd on the stack but instead make it
static const. Makes the object code smaller by 82 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  26548	   7288	     64	  33900	   846c	sound/soc/codecs/rt1308.o

After:
   text	   data	    bss	    dec	    hex	filename
  26370	   7384	     64	  33818	   841a	sound/soc/codecs/rt1308.o

(gcc version 9.2.1, amd64)
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190907074634.22144-1-colin.king@canonical.comSigned-off-by: NMark Brown <broonie@kernel.org>

Don't populate the array pd on the stack but instead make it
static const. Makes the object code smaller by 93 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  38961	   9784	     64	  48809	   bea9	sound/soc/codecs/rt1305.o

After:
   text	   data	    bss	    dec	    hex	filename
  38804	   9848	     64	  48716	   be4c	sound/soc/codecs/rt1305.o

(gcc version 9.2.1, amd64)
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190907074156.21907-1-colin.king@canonical.comSigned-off-by: NMark Brown <broonie@kernel.org>

Don't populate the array pd on the stack but instead make it
static const. Makes the object code smaller by 100 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  51463	  13016	    128	  64607	   fc5f	sound/soc/codecs/rt1011.o

After:
   text	   data	    bss	    dec	    hex	filename
  51299	  13080	    128	  64507	   fbfb	sound/soc/codecs/rt1011.o

(gcc version 9.2.1, amd64)
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190907073717.21632-1-colin.king@canonical.comSigned-off-by: NMark Brown <broonie@kernel.org>

This patch set 0Hz to sysclk when shutdown the card.

Some codecs set rate constraints that derives from sysclk. This
mechanism works correctly if machine drivers give fixed frequency.

But simple-audio and audio-graph card set variable clock rate if
'mclk-fs' property exists. In this case, rate constraints will go
bad scenario. For example a codec accepts three limited rates
(mclk / 256, mclk / 384, mclk / 512).

Bad scenario as follows (mclk-fs = 256):
   - Initialize sysclk by correct value (Ex. 12.288MHz)
     - Codec set constraints of PCM rate by sysclk
       48kHz (1/256), 32kHz (1/384), 24kHz (1/512)
   - Play 48kHz sound, it's acceptable
   - Sysclk is not changed

   - Play 32kHz sound, it's acceptable
   - Set sysclk to 8.192MHz (= fs * mclk-fs = 32k * 256)
     - Codec set constraints of PCM rate by sysclk
       32kHz (1/256), 21.33kHz (1/384), 16kHz (1/512)

   - Play 48kHz again, but it's NOT acceptable because constraints
     do not allow 48kHz

So codecs treat 0Hz sysclk as signal of applying no constraints to
avoid this problem.
Signed-off-by: NKatsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190907174501.19833-1-katsuhiro@katsuster.netSigned-off-by: NMark Brown <broonie@kernel.org>

This patch ignores sysclk setting if it is 0Hz.

Some codecs treat 0Hz sysclk as signal of applying no constraints.
This driver does not have such feature but current implementation
outputs 'Failed to set mclk' error message if machine driver sets
0Hz sysclk to this driver.
Signed-off-by: NKatsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190907174332.19586-1-katsuhiro@katsuster.netSigned-off-by: NMark Brown <broonie@kernel.org>

Don't populate the arrays on the stack but instead make them
static const. Makes the object code smaller by 37 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  16253	   7200	      0	  23453	   5b9d	sound/soc/codecs/ad193x.o

After:
   text	   data	    bss	    dec	    hex	filename
  16056	   7360	      0	  23416	   5b78	sound/soc/codecs/ad193x.o

(gcc version 9.2.1, amd64)
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190906161404.1440-1-colin.king@canonical.comSigned-off-by: NMark Brown <broonie@kernel.org>

This patch supports some type of machine drivers that set 0 to mclk
when sound device goes to idle state. After applied this patch,
sysclk == 0 means there is no constraint of sound rate and other
values will set constraints which is derived by sysclk setting.

Original code refuses sysclk == 0 setting. But some boards and SoC
(such as RockPro64 and RockChip I2S) has connected SoC MCLK out to
ES8316 MCLK in. In this case, SoC side I2S will choose suitable
frequency of MCLK such as fs * mclk-fs when user starts playing or
capturing.

Bad scenario as follows (mclk-fs = 256):
  - Initialize sysclk by correct value (Ex. 12.288MHz)
    - ES8316 set constraints of PCM rate by sysclk
      48kHz (1/256), 32kHz (1/384), 30.720kHz (1/400),
      24kHz (1/512), 16kHz (1/768), 12kHz (1/1024)
  - Play 48kHz sound, it's acceptable
  - Sysclk is not changed

  - Play 32kHz sound, it's acceptable
  - Set sysclk by 8.192MHz (= fs * mclk-fs = 32k * 256)
    - ES8316 set constraints of PCM rate by sysclk
      32kHz (1/256), 21.33kHz (1/384), 20.48kHz (1/400),
      16kHz (1/512), 10.66kHz (1/768), 8kHz (1/1024)

  - Play 48kHz again, but it's NOT acceptable because constraints
    list does not allow 48kHz
Signed-off-by: NKatsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190907163653.9382-2-katsuhiro@katsuster.netSigned-off-by: NMark Brown <broonie@kernel.org>

This patch removes redundant null checks for optional MCLK clock.
And fix DT binding document for changing clock property to optional
from required.
Signed-off-by: NKatsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190907163653.9382-1-katsuhiro@katsuster.netSigned-off-by: NMark Brown <broonie@kernel.org>

When do compile test, if SND_SOC_SOF_OF is not set, we get:

sound/soc/sof/imx/imx8.o: In function `imx8_dsp_handle_request':
imx8.c:(.text+0xb0): undefined reference to `snd_sof_ipc_msgs_rx'
sound/soc/sof/imx/imx8.o: In function `imx8_ipc_msg_data':
imx8.c:(.text+0xf4): undefined reference to `sof_mailbox_read'
sound/soc/sof/imx/imx8.o: In function `imx8_dsp_handle_reply':
imx8.c:(.text+0x160): undefined reference to `sof_mailbox_read'

Make SND_SOC_SOF_IMX_TOPLEVEL always depends on SND_SOC_SOF_OF
Reported-by: NHulk Robot <hulkci@huawei.com>
Fixes: 202acc56 ("ASoC: SOF: imx: Add i.MX8 HW support")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Reviewed-by: NDaniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190905064400.24800-1-yuehaibing@huawei.comSigned-off-by: NMark Brown <broonie@kernel.org>

On the sm1, the TDMOUT number of input is extended and the
the gain enable bit moved to accommodate this extension
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190905120120.31752-9-jbrunet@baylibre.comSigned-off-by: NMark Brown <broonie@kernel.org>

On sm1, the maximum number TODDR inputs is extended to 16.
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190905120120.31752-8-jbrunet@baylibre.comSigned-off-by: NMark Brown <broonie@kernel.org>

On sm1, the output routing bits have moved to CTRL2 register
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190905120120.31752-7-jbrunet@baylibre.comSigned-off-by: NMark Brown <broonie@kernel.org>

The TDMIN component, as it, has a maximum of 16 input. Depending on
the SoC, these may not all be connected.

Instead of decribing only the connected inputs of each SoC, describe
them all and let ASoC routing do the rest.
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190905120120.31752-6-jbrunet@baylibre.comSigned-off-by: NMark Brown <broonie@kernel.org>