- 14 12月, 2017 29 次提交
-
-
由 Wanpeng Li 提交于
MSR_IA32_DEBUGCTLMSR is zeroed on VMEXIT, so it is saved/restored each time during world switch. This patch caches the host IA32_DEBUGCTL MSR and saves/restores the host IA32_DEBUGCTL msr when guest/host switches to avoid to save/restore each time during world switch. This saves about 100 clock cycles per vmexit. Suggested-by: NJim Mattson <jmattson@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: NJim Mattson <jmattson@google.com> Reviewed-by: NDavid Hildenbrand <david@redhat.com> Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
-
由 Mark Kanda 提交于
When attempting to free a loaded VMCS02, add a WARN and avoid freeing it (to avoid use-after-free situations). Suggested-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NMark Kanda <mark.kanda@oracle.com> Reviewed-by: NAmeya More <ameya.more@oracle.com> Reviewed-by: NKrish Sadhukhan <krish.sadhukhan@oracle.com> Reviewed-by: NDavid Hildenbrand <david@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
-
由 Jim Mattson 提交于
The potential performance advantages of a vmcs02 pool have never been realized. To simplify the code, eliminate the pool. Instead, a single vmcs02 is allocated per VCPU when the VCPU enters VMX operation. Signed-off-by: NJim Mattson <jmattson@google.com> Signed-off-by: NMark Kanda <mark.kanda@oracle.com> Reviewed-by: NAmeya More <ameya.more@oracle.com> Reviewed-by: NDavid Hildenbrand <david@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
-
由 Yang Zhong 提交于
Intel IceLake cpu has added new cpu features,AVX512_VBMI2/GFNI/ VAES/VPCLMULQDQ/AVX512_VNNI/AVX512_BITALG. Those new cpu features need expose to guest VM. The bit definition: CPUID.(EAX=7,ECX=0):ECX[bit 06] AVX512_VBMI2 CPUID.(EAX=7,ECX=0):ECX[bit 08] GFNI CPUID.(EAX=7,ECX=0):ECX[bit 09] VAES CPUID.(EAX=7,ECX=0):ECX[bit 10] VPCLMULQDQ CPUID.(EAX=7,ECX=0):ECX[bit 11] AVX512_VNNI CPUID.(EAX=7,ECX=0):ECX[bit 12] AVX512_BITALG The release document ref below link: https://software.intel.com/sites/default/files/managed/c5/15/\ architecture-instruction-set-extensions-programming-reference.pdf The kernel dependency commit in kvm.git: (c128dbfa) Signed-off-by: NYang Zhong <yang.zhong@intel.com> Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
-
由 Markus Elfring 提交于
Add a jump target so that a bit of exception handling can be better reused at the end of this function. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
-
由 Liran Alon 提交于
This MSR returns the number of #SMIs that occurred on CPU since boot. It was seen to be used frequently by ESXi guest. Patch adds a new vcpu-arch specific var called smi_count to save the number of #SMIs which occurred on CPU since boot. It is exposed as a read-only MSR to guest (causing #GP on wrmsr) in RDMSR/WRMSR emulation code. MSR_SMI_COUNT is also added to emulated_msrs[] to make sure user-space can save/restore it for migration purposes. Signed-off-by: NLiran Alon <liran.alon@oracle.com> Suggested-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NNikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: NBhavesh Davda <bhavesh.davda@oracle.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NDavid Hildenbrand <david@redhat.com> Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
-
由 Radim Krčmář 提交于
If Intel/AMD implements MWAIT, we expect that it works well and only reject known bugs; no reason to do it the other way around for minor vendors. (Not that they are relevant ATM.) This allows further simplification of kvm_mwait_in_guest(). And use boot_cpu_has() instead of "cpu_has(&boot_cpu_data," while at it. Reviewed-by: NAlexander Graf <agraf@suse.de> Acked-by: NBorislav Petkov <bp@suse.de> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Radim Krčmář 提交于
The check was added in some iteration while trying to fix a reported OS X on Core 2 bug, but that bug is elsewhere. The comment is misleading because the guest can call MWAIT with ECX = 0 even if we enforce CPUID5_ECX_INTERRUPT_BREAK; the call would have the exactly the same effect as if the host didn't have the feature. A problem is that a QEMU feature exposes CPUID5_ECX_INTERRUPT_BREAK on CPUs that do not support it. Removing the check changes behavior on last Pentium 4 lines (Presler, Dempsey, and Tulsa, which had VMX and MONITOR while missing INTERRUPT_BREAK) when running a guest OS that uses MWAIT without checking for its presence (QEMU doesn't expose MONITOR). The only known OS that ignores the MONITOR flag is old Mac OS X and we allowed it to bug on Core 2 (MWAIT used to throw #UD and only that OS noticed), so we can save another 20 lines letting it bug on even older CPUs. Alternatively, we can return MWAIT exiting by default and let userspace toggle it. Reviewed-by: NAlexander Graf <agraf@suse.de> Acked-by: NBorislav Petkov <bp@suse.de> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Radim Krčmář 提交于
The bug prevents MWAIT from waking up after a write to the monitored cache line. KVM might emulate a CPU model that shouldn't have the bug, so the guest would not employ a workaround and possibly miss wakeups. Better to avoid the situation. Reviewed-by: NAlexander Graf <agraf@suse.de> Acked-by: NBorislav Petkov <bp@suse.de> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Colin Ian King 提交于
The array audit_point_name is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: arch/x86/kvm/mmu_audit.c:22:12: warning: symbol 'audit_point_name' was not declared. Should it be static? Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Gimcuan Hui 提交于
The kvm_mmu_clear_all_pte_masks interface is only used by kvm_mmu_module_init locally, and does not need to be called by other module, make it static. This patch cleans up sparse warning: symbol 'kvm_mmu_clear_all_pte_masks' was not declared. Should it be static? Signed-off-by: NGimcuan Hui <gimcuan@gmail.com> Reviewed-by: NDavid Hildenbrand <david@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
This is encoded as F3 0F C7 /7 with a register argument. The register argument is the second array in the group9 GroupDual, while F3 is the fourth element of a Prefix. Reviewed-by: NWanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
UMIP can be emulated almost perfectly on Intel processor by enabling descriptor-table exits. SMSW does not cause a vmexit and hence it cannot be changed into a #GP fault, but all in all it's the most "innocuous" of the unprivileged instructions that UMIP blocks. In fact, Linux is _also_ emulating SMSW instructions on behalf of the program that executes them, because some 16-bit programs expect to use SMSW to detect vm86 mode, so this is an even smaller issue. Reviewed-by: NWanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
The User-Mode Instruction Prevention feature present in recent Intel processor prevents a group of instructions (sgdt, sidt, sldt, smsw, and str) from being executed with CPL > 0. Otherwise, a general protection fault is issued. UMIP instructions in general are also able to trigger vmexits, so we can actually emulate UMIP on older processors. This commit sets up the infrastructure so that kvm-intel.ko and kvm-amd.ko can set the UMIP feature bit for CPUID even if the feature is not actually available in hardware. Reviewed-by: NWanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
These are needed to handle the descriptor table vmexits when emulating UMIP. Reviewed-by: NWanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Add the CPUID bits, make the CR4.UMIP bit not reserved anymore, and add UMIP support for instructions that are already emulated by KVM. Reviewed-by: NWanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Stefan Raspl 提交于
Add a line for the total number of events and current average at the bottom of the body. Note that both values exclude child trace events. I.e. if drilldown is activated via interactive command 'x', only the totals are accounted, or we'd be counting these twice (see previous commit "tools/kvm_stat: fix child trace events accounting"). Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Stefan Raspl 提交于
Unhandled arguments, which could easily include typos, are simply ignored. We should be strict to avoid undetected typos. To reproduce start kvm_stat with an extra argument, e.g. 'kvm_stat -d bnuh5ol' and note that this will actually work. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Stefan Raspl 提交于
Errors while parsing the '-g' command line argument result in display of usage information prior to the error message. This is a bit confusing, as the command line is syntactically correct. To reproduce, run 'kvm_stat -g' and specify a non-existing or inactive guest. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Stefan Raspl 提交于
Passing an invalid regular expression on the command line results in a traceback. Note that interactive specification of invalid regular expressions is not affected To reproduce, run "kvm_stat -f '*'". Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Stefan Raspl 提交于
The man page update for this new functionality was omitted. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Stefan Raspl 提交于
Child trace events were included in calculation of the overall total, which is used for calculation of the percentages of the '%Total' column. However, the parent trace envents' stats summarize the child trace events, hence we'd incorrectly account for them twice, leading to slightly wrong stats. With this fix, we use the correct total. Consequently, the sum of the child trace events' '%Total' column values is identical to the respective value of the respective parent event. However, this also means that the sum of the '%Total' column values will aggregate to more than 100 percent. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Stefan Raspl 提交于
Commit 67fbcd62 ("tools/kvm_stat: add '-f help' to get the available event list") added support for '-f help'. However, the extra handling of 'help' will also take effect when 'help' is specified as a regex in interactive mode via 'f'. This results in display of all events while only those matching this regex should be shown. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Stefan Raspl 提交于
When updating the fields filter, tracepoint events of fields previously not visible were not enabled, as TracepointProvider.update_fields() updated the member variable directly instead of using the setter, which triggers the event enable/disable. To reproduce, run 'kvm_stat -f kvm_exit', press 'c' to remove the filter, and notice that no add'l fields that do not match the regex 'kvm_exit' will appear. This issue was introduced by commit c469117d ("tools/kvm_stat: simplify initializers"). Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Stefan Raspl 提交于
When displaying debugfs events listed by guests, an attempt to switch to reporting of stats for individual child trace events results in garbled output. Reason is that when toggling drilldown, the update of the stats doesn't honor when events are displayed by guests, as indicated by Tui._display_guests. To reproduce, run 'kvm_stat -d' and press 'b' followed by 'x'. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Stefan Raspl 提交于
Specifying a guest via '-g foo' always results in an error: $ kvm_stat -g foo Usage: kvm_stat [options] kvm_stat: error: Error while searching for guest "foo", use "-p" to specify a pid instead Reason is that Tui.get_pid_from_gname() is not static, as it is supposed to be. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Peter Xu 提交于
------------[ cut here ]------------ Bad FPU state detected at kvm_put_guest_fpu+0xd8/0x2d0 [kvm], reinitializing FPU registers. WARNING: CPU: 1 PID: 4594 at arch/x86/mm/extable.c:103 ex_handler_fprestore+0x88/0x90 CPU: 1 PID: 4594 Comm: qemu-system-x86 Tainted: G B OE 4.15.0-rc2+ #10 RIP: 0010:ex_handler_fprestore+0x88/0x90 Call Trace: fixup_exception+0x4e/0x60 do_general_protection+0xff/0x270 general_protection+0x22/0x30 RIP: 0010:kvm_put_guest_fpu+0xd8/0x2d0 [kvm] RSP: 0018:ffff8803d5627810 EFLAGS: 00010246 kvm_vcpu_reset+0x3b4/0x3c0 [kvm] kvm_apic_accept_events+0x1c0/0x240 [kvm] kvm_arch_vcpu_ioctl_run+0x1658/0x2fb0 [kvm] kvm_vcpu_ioctl+0x479/0x880 [kvm] do_vfs_ioctl+0x142/0x9a0 SyS_ioctl+0x74/0x80 do_syscall_64+0x15f/0x600 where kvm_put_guest_fpu is called without a prior kvm_load_guest_fpu. To fix it, move kvm_load_guest_fpu to the very beginning of kvm_arch_vcpu_ioctl_run. Cc: stable@vger.kernel.org Fixes: f775b13eSigned-off-by: NPeter Xu <peterx@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Wanpeng Li 提交于
*** Guest State *** CR0: actual=0x0000000000000030, shadow=0x0000000060000010, gh_mask=fffffffffffffff7 CR4: actual=0x0000000000002050, shadow=0x0000000000000000, gh_mask=ffffffffffffe871 CR3 = 0x00000000fffbc000 RSP = 0x0000000000000000 RIP = 0x0000000000000000 RFLAGS=0x00000000 DR7 = 0x0000000000000400 ^^^^^^^^^^ The failed vmentry is triggered by the following testcase when ept=Y: #include <unistd.h> #include <sys/syscall.h> #include <string.h> #include <stdint.h> #include <linux/kvm.h> #include <fcntl.h> #include <sys/ioctl.h> long r[5]; int main() { r[2] = open("/dev/kvm", O_RDONLY); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7); struct kvm_regs regs = { .rflags = 0, }; ioctl(r[4], KVM_SET_REGS, ®s); ioctl(r[4], KVM_RUN, 0); } X86 RFLAGS bit 1 is fixed set, userspace can simply clearing bit 1 of RFLAGS with KVM_SET_REGS ioctl which results in vmentry fails. This patch fixes it by oring X86_EFLAGS_FIXED during ioctl. Cc: stable@vger.kernel.org Suggested-by: NJim Mattson <jmattson@google.com> Reviewed-by: NDavid Hildenbrand <david@redhat.com> Reviewed-by: NQuan Xu <quan.xu0@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Jim Mattson <jmattson@google.com> Cc: stable@vger.kernel.org Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Wanpeng Li 提交于
The below test case can cause infinite loop in kvm when ept=0. #include <unistd.h> #include <sys/syscall.h> #include <string.h> #include <stdint.h> #include <linux/kvm.h> #include <fcntl.h> #include <sys/ioctl.h> long r[5]; int main() { r[2] = open("/dev/kvm", O_RDONLY); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7); ioctl(r[4], KVM_RUN, 0); } It doesn't setup the memory regions, mmu_alloc_shadow/direct_roots() in kvm return 1 when kvm fails to allocate root page table which can result in beblow infinite loop: vcpu_run() { for (;;) { r = vcpu_enter_guest()::kvm_mmu_reload() returns 1 if (r <= 0) break; if (need_resched()) cond_resched(); } } This patch fixes it by returning -ENOSPC when there is no available kvm mmu page for root page table. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: stable@vger.kernel.org Fixes: 26eeb53c (KVM: MMU: Bail out immediately if there is no available mmu page) Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 11 12月, 2017 6 次提交
-
-
由 Linus Torvalds 提交于
-
由 Jeff Layton 提交于
HPFS does not set SB_I_VERSION and does not use the i_version counter internally. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NMikulas Patocka <mikulas@twibright.com> Reviewed-by: NMikulas Patocka <mikulas@twibright.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Slaby 提交于
sign_extend32 counts the sign bit parameter from 0, not from 1. So we have to use "11" for 12th bit, not "12". This mistake means we have not allowed negative op and cmp args since commit 30d6e0a4 ("futex: Remove duplicated code and fix undefined behaviour") till now. Fixes: 30d6e0a4 ("futex: Remove duplicated code and fix undefined behaviour") Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <dvhart@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux由 Linus Torvalds 提交于
Pull btrfs fixes from David Sterba: "This contains a few fixes (error handling, quota leak, FUA vs nobarrier mount option). There's one one worth mentioning separately - an off-by-one fix that leads to overwriting first byte of an adjacent page with 0, out of bounds of the memory allocated by an ioctl. This is under a privileged part of the ioctl, can be triggerd in some subvolume layouts" * tag 'for-4.15-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: Fix possible off-by-one in btrfs_search_path_in_tree Btrfs: disable FUA if mounted with nobarrier btrfs: fix missing error return in btrfs_drop_snapshot btrfs: handle errors while updating refcounts in update_ref_for_cow btrfs: Fix quota reservation leak on preallocated files
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: - A revert of all SCPI changes from the 4.15 merge window. They had regressions on the Amlogic platforms, and the submaintainer isn't around to fix these bugs due to vacation, etc. So we agreed to revert and revisit in next release cycle. - A series fixing a number of bugs for ARM CCN interconnect, around module unload, smp_processor_id() in preemptable context, and fixing some memory allocation failure checks. - A handful of devicetree fixes for different platforms, fixing warnings and errors that were previously ignored by the compiler. - The usual set of mostly minor fixes for different platforms. * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits) ARM64: dts: meson-gx: fix UART pclk clock name ARM: omap2: hide omap3_save_secure_ram on non-OMAP3 builds arm: dts: nspire: Add missing #phy-cells to usb-nop-xceiv ARM: dts: Fix dm814x missing phy-cells property ARM: dts: Fix elm interrupt compiler warning bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left. bus: arm-cci: Fix use of smp_processor_id() in preemptible context bus: arm-ccn: Fix use of smp_processor_id() in preemptible context bus: arm-ccn: Simplify code bus: arm-ccn: Check memory allocation failure bus: arm-ccn: constify attribute_group structures. firmware: arm_scpi: Revert updates made during v4.15 merge window arm: dts: marvell: Add missing #phy-cells to usb-nop-xceiv arm64: dts: sort vendor subdirectories in Makefile alphabetically meson-gx-socinfo: Fix package id parsing ARM: meson: fix spelling mistake: "Couln't" -> "Couldn't" ARM: dts: meson: fix the memory region of the GPIO interrupt controller ARM: dts: meson: correct the sort order for the the gpio_intc node MAINTAINERS: exclude other Socionext SoC DT files from ARM/UNIPHIER entry arm64: dts: uniphier: remove unnecessary interrupt-parent ...
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Radim Krčmář: "ARM: - A number of issues in the vgic discovered using SMATCH - A bit one-off calculation in out stage base address mask (32-bit and 64-bit) - Fixes to single-step debugging instructions that trap for other reasons such as MMMIO aborts - Printing unavailable hyp mode as error - Potential spinlock deadlock in the vgic - Avoid calling vgic vcpu free more than once - Broken bit calculation for big endian systems s390: - SPDX tags - Fence storage key accesses from problem state - Make sure that irq_state.flags is not used in the future x86: - Intercept port 0x80 accesses to prevent host instability (CVE) - Use userspace FPU context for guest FPU (mainly an optimization that fixes a double use of kernel FPU) - Do not leak one page per module load - Flush APIC page address cache from MMU invalidation notifiers" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) KVM: x86: fix APIC page invalidation KVM: s390: Fix skey emulation permission check KVM: s390: mark irq_state.flags as non-usable KVM: s390: Remove redundant license text KVM: s390: add SPDX identifiers to the remaining files KVM: VMX: fix page leak in hardware_setup() KVM: VMX: remove I/O port 0x80 bypass on Intel hosts x86,kvm: remove KVM emulator get_fpu / put_fpu x86,kvm: move qemu/guest FPU switching out to vcpu_run KVM: arm/arm64: Fix broken GICH_ELRSR big endian conversion KVM: arm/arm64: kvm_arch_destroy_vm cleanups KVM: arm/arm64: Fix spinlock acquisition in vgic_set_owner kvm: arm: don't treat unavailable HYP mode as an error KVM: arm/arm64: Avoid attempting to load timer vgic state without a vgic kvm: arm64: handle single-step of hyp emulated mmio instructions kvm: arm64: handle single-step during SError exceptions kvm: arm64: handle single-step of userspace mmio instructions kvm: arm64: handle single-stepping trapped instructions KVM: arm/arm64: debug: Introduce helper for single-step arm: KVM: Fix VTTBR_BADDR_MASK BUG_ON off-by-one ...
-
- 10 12月, 2017 4 次提交
-
-
由 Olof Johansson 提交于
* fixes: ARM64: dts: meson-gx: fix UART pclk clock name ARM: dts: Fix dm814x missing phy-cells property ARM: dts: Fix elm interrupt compiler warning bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left. bus: arm-cci: Fix use of smp_processor_id() in preemptible context bus: arm-ccn: Fix use of smp_processor_id() in preemptible context bus: arm-ccn: Simplify code bus: arm-ccn: Check memory allocation failure bus: arm-ccn: constify attribute_group structures. meson-gx-socinfo: Fix package id parsing ARM: meson: fix spelling mistake: "Couln't" -> "Couldn't" ARM: dts: meson: fix the memory region of the GPIO interrupt controller ARM: dts: meson: correct the sort order for the the gpio_intc node
-
由 Olof Johansson 提交于
Merge tag 'amlogic-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixes Amlogic fixes for v4.15-rc - GPIO interrupt fixes - socinfo fix for GX series - fix typo * tag 'amlogic-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-gx: fix UART pclk clock name meson-gx-socinfo: Fix package id parsing ARM: meson: fix spelling mistake: "Couln't" -> "Couldn't" ARM: dts: meson: fix the memory region of the GPIO interrupt controller ARM: dts: meson: correct the sort order for the the gpio_intc node Signed-off-by: NOlof Johansson <olof@lixom.net>
-
git://git.linaro.org/people/pawel.moll/linux由 Olof Johansson 提交于
bus: ARM CCN and CCI PMU driver fixes This is a bunch of fixes CCN and (guest starring this time) CCI drivers. * Check for potential of failed allocation for the driver name string * Manage CPU ID properly at allocation (both CCN and CCI) * Fix module unload warnings related to objects release order * Small improvements like using allocating printfs and proper attributes constification The one fixing potential issues have been cc-ed to stable. * tag 'ccn/fixes-for-4.15' of git://git.linaro.org/people/pawel.moll/linux: bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left. bus: arm-cci: Fix use of smp_processor_id() in preemptible context bus: arm-ccn: Fix use of smp_processor_id() in preemptible context bus: arm-ccn: Simplify code bus: arm-ccn: Check memory allocation failure bus: arm-ccn: constify attribute_group structures. Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'omap-for-v4.15/fixes-dt-warnings' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Two fixes for dts compiler warnings These recently started showing up with better dtc checks being introduced. * tag 'omap-for-v4.15/fixes-dt-warnings' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Fix dm814x missing phy-cells property ARM: dts: Fix elm interrupt compiler warning Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 09 12月, 2017 1 次提交
-
-
由 James Morris 提交于
Merge tag 'keys-fixes-20171208' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into keys-for-linus Assorted fixes for keyrings, ASN.1, X.509 and PKCS#7.
-