Add a 'kato' controller sysfs attribute to display the current
keep-alive timeout value (if any). This allows userspace to identify
persistent discovery controllers, as these will have a non-zero
KATO value.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

According to the NVMe base spec the KATO commands should be sent
at half of the KATO interval, to properly account for round-trip
times.
As we now will only ever send one KATO command per connection we
can easily use the recommended values.
This also fixes a potential issue where the request timeout for
the KATO command does not match the value in the connect command,
which might be causing spurious connection drops from the target.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Adding entry for dev_attr_fast_io_fail_tmo to avoid the kernel crash
while reading and writing the fast_io_fail_tmo.

Fixes: 09fbed63 (nvme: export fast_io_fail_tmo to sysfs)
Signed-off-by: NGopal Tiwari <gtiwari@redhat.com>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Instead of failing to scan the namespace entirely when unsupported
features are detected, just mark the gendisk hidden but allow other
access like the upcoming per-namespace character device.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NJavier González <javier.gonz@samsung.com>

These will be reused for the per-namespace character devices.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NJavier González <javier.gonz@samsung.com>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>

Move the multipath block_device_operations to multipath.c, where they
belong.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NJavier González <javier.gonz@samsung.com>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>

Add a helper to avoid opencoding ns_head->ref manipulations.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NJavier González <javier.gonz@samsung.com>
Reviewed-by: NKanchan Joshi <joshi.k@samsung.com>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>

Split out the ioctl code from core.c into a new file.  Also update
copyrights while we're at it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NJavier González <javier.gonz@samsung.com>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>

Don't bother to look up a namespace just to drop if after retreiving the
controller for the multipath case.  Just look up a live controller for
the subsystem directly.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NJavier González <javier.gonz@samsung.com>

Only use the existing ioctl handler for the multipath case, and add a
simpler one that reverts to the pre-multipath case for not shared
use case.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NJavier González <javier.gonz@samsung.com>

Don't bother defining a separate compat_ioctl handler, and just handle
the NVME_IOCTL_SUBMIT_IO32 case inline.  Also only defined it for those
ABIs (currently just i386 vs x86_64) that are affected.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NJavier González <javier.gonz@samsung.com>

Factor out a helper for the namespace based ioctls.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NJavier González <javier.gonz@samsung.com>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>

Pass the proper user pointer instead of the not all that useful integer
representation.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NJavier González <javier.gonz@samsung.com>

Return false from nvme_set_disk_name and let the caller set the
non-multipath name instead of duplicating the naming information in two
places.  Also remove the pointless local variables for the disk name
and flags and the not needed ctrl argument.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NJavier González <javier.gonz@samsung.com>

Move the multipath gendisk out of #ifdef CONFIG_NVME_MULTIPATH and add
a new nvme_ns_head_multipath that uses it to check if a ns_head has
a multipath device associated with it.
Signed-off-by: NMinwoo Im <minwoo.im.dev@gmail.com>
[hch: added the IS_ENABLED, converted a few existing users]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NJavier González <javier.gonz@samsung.com>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>

There is a single trailing whitespace in core.c.
Since this is just a single whitespace, the chances of this affecting
backports to stable should be quite low, so let's just remove it.
Signed-off-by: NNiklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Instead of triggering an integer overflow and undefined behavior if MDTS is
large, set max_hw_sectors to UINT_MAX.
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
[hch: rebased to account for the new nvme_mps_to_sectors helper]
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Commands that access LBA contents without a data transfer between the
host historically have not had a spec defined upper limit. The driver
set the queue constraints for such commands to the max data transfer
size just to be safe, but this artificial constraint frequently limits
devices below their capabilities.

The NVMe Workgroup ratified TP4040 defines how a controller may
advertise their non-MDTS limits. Use these if provided and default to
the current constraints if not. Since the Dataset Management command
limits are defined in logical blocks, but without a namespace to tell us
the logical block size, the code defaults to the safe 512b size.
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

When a passthru command targets a specific namespace, the ns parameter to
nvme_user_cmd()/nvme_user_cmd64() is set. However, there is currently no
validation that the nsid specified in the passthru command targets the
namespace/nsid represented by the block device that the ioctl was
performed on.

Add a check that validates that the nsid in the passthru command matches
that of the supplied namespace.
Signed-off-by: NNiklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: NJavier González <javier@javigon.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NKanchan Joshi <joshi.k@samsung.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Commit 8c4dfea9 ("nvme-fabrics: reject I/O to offline device")
introduced fast_io_fail_tmo but didn't export the value to sysfs. The
value can be set during the 'nvme connect'. Export the timeout value
to user space via sysfs to allow runtime configuration.

Cc: Victor Gladkov <Victor.Gladkov@kioxia.com>
Signed-off-by: NDaniel Wagner <dwagner@suse.de>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NHimanshu Madhani <himanshu.madhaani@oracle.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

If there is an error we will leave the function early. So there
is no need for an else. Remove it.
Signed-off-by: NDaniel Wagner <dwagner@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

sysfs_emit is the recommended API to use for formatting strings to be
returned to user space. It is equivalent to scnprintf and aware of the
PAGE_SIZE buffer size.
Suggested-by: NChaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>
Signed-off-by: NDaniel Wagner <dwagner@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

We don't need to repeatedly spam the kernel logs with the same warning
about unhandled passthrough IO effects. Just one warning is sufficient
to observe this condition occurs.
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

All nvme transport drivers preallocate an nvme command for each request.
Assume to use that command for nvme_setup_cmd() instead of requiring
drivers pass a pointer to it. All nvme drivers must initialize the
generic nvme_request 'cmd' to point to the transport's preallocated
nvme_command.

The generic nvme_request cmd pointer had previously been used only as a
temporary copy for passthrough commands. Since it now points to the
command that gets dispatched, passthrough commands must directly set it
up prior to executing the request.
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NJens Axboe <axboe@kernel.dk>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Add a new line in functions nvme_pr_preempt(), nvme_pr_clear(), and
nvme_pr_release() after variable declaration which follows the rest of
the code in the nvme/host/core.c.

No functional change(s) in this patch.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

nvme_clear_request() has a check for flag REQ_DONTPREP and it is called
from nvme_init_request() and nvme_setuo_cmd().

The function nvme_init_request() is called from nvme_alloc_request()
and nvme_alloc_request_qid(). From these two callers new request is
allocated everytime. For newly allocated request RQF_DONTPREP is never
set. Since after getting a tag, block layer sets the req->rq_flags == 0
and never sets the REQ_DONTPREP when returning the request :-

nvme_alloc_request()
	blk_mq_alloc_request()
		blk_mq_rq_ctx_init()
			rq->rq_flags = 0 <----

nvme_alloc_request_qid()
	blk_mq_alloc_request_hctx()
		blk_mq_rq_ctx_init()
			rq->rq_flags = 0 <----

The block layer does set req->rq_flags but REQ_DONTPREP is not one of
them and that is set by the driver.

That means we can unconditinally set the REQ_DONTPREP value to the
rq->rq_flags when nvme_init_request()->nvme_clear_request() is called
from above two callers.

Move the check for REQ_DONTPREP from nvme_clear_nvme_request() into
nvme_setup_cmd().

This is needed since nvme_alloc_request() now gets called from fast
path when NVMeOF target is configured with passthru backend to avoid
unnecessary checks in the fast path.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Since nvmet_setup_passthru() function falls in fast path when called
from the NVMeOF passthru backend, make it inline.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The function nvme_init_ctrl_finish() (formerly nvme_init_identify()) has
grown over the period of time about ~200 lines given the size of nvme id
ctrl data structure.

Move the nvme_id_ctrl data structure related initilzation into helper
nvme_init_identify() and call it from nvme_init_ctrl_finish().

When we move the code into nvme_init_identify() change the local
variable i from int to unsigned int and remove the duplicate kfree()
after nvme_mpath_init() and jump to the label out_free if
nvme_mpath_ini() fails.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This is a prep patch so that we can move the identify data structure
related code initialization from nvme_init_identify() into a helper.

Rename the function nvmet_init_identify() to nvmet_init_ctrl_finish().

Next patch will move the nvme_id_ctrl related initialization from newly
renamed function nvme_init_ctrl_finish() into the nvme_init_identify()
helper.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

For passthrough I/O commands, effects are usually to be zero.
nvme_passthrough_end() does three checks in futility for this case.
Bail out of function-call/checks.
Signed-off-by: NKanchan Joshi <joshi.k@samsung.com>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

ns can be NULL at this point, and my move of the check from
the original patch by Chaitanya broke this.

Fixes: 0ec84df4 ("nvme-core: check ctrl css before setting up zns")
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Ensure multiple Command Sets are supported before starting to setup a
ZNS namespace.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
[hch: move the check around a bit]
Signed-off-by: NChristoph Hellwig <hch@lst.de>

NVME_REQ_CANCELLED is translated into -EINTR in nvme_submit_sync_cmd(),
so we should be setting this flags during nvme_cancel_request() to
ensure that the callers to nvme_submit_sync_cmd() will get the correct
error code when the controller is reset.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChao Leng <lengchao@huawei.com>
Reviewed-by: NDaniel Wagner <dwagner@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

We only should remove namespaces when we get fatal error back from
the device or when the namespace IDs have changed.
So instead of painfully masking out error numbers which might indicate
that the error should be ignored we could use an NVME status code
to indicated when the namespace should be removed.
That simplifies the final logic and makes it less error-prone.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NDaniel Wagner <dwagner@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The original design to use device-managed resource allocation
doesn't really work as the NVMe controller has a vastly different
lifetime than the hwmon sysfs attributes, causing warning about
duplicate sysfs entries upon reconnection.
This patch reworks the hwmon allocation to avoid device-managed
resource allocation, and uses the NVMe controller as parent for
the sysfs attributes.

Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: NHannes Reinecke <hare@suse.de>
Tested-by: NEnzo Matsumiya <ematsumiya@suse.de>
Tested-by: NDaniel Wagner <dwagner@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

When using nvme native multipathing, if a path related error occurs
during ->queue_rq, the request needs to be completed with
NVME_SC_HOST_PATH_ERROR so that the request can be failed over.

Introduce a helper to complete the command from ->queue_rq in a wait
that invokes nvme_complete_rq.
Signed-off-by: NChao Leng <lengchao@huawei.com>
[hch: renamed, added a return value to clean up the callers a bit]
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Fix the following coccicheck warning:

./drivers/nvme/host/core.c:3580:8-16: WARNING: use scnprintf or sprintf.
./drivers/nvme/host/core.c:3570:8-16: WARNING: use scnprintf or sprintf.
./drivers/nvme/host/core.c:3560:8-16: WARNING: use scnprintf or sprintf.
./drivers/nvme/host/core.c:3526:8-16: WARNING: use scnprintf or sprintf.
./drivers/nvme/host/core.c:2833:8-16: WARNING: use scnprintf or sprintf.

Reported-by: Abaci Robot<abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

For a zoned namespace, in nvme_update_ns_info(), call
nvme_update_zone_info() after executing nvme_update_disk_info() so that
the namespace queue logical and physical block size limits are set.
This allows setting the namespace queue max_zone_append_sectors limit
in nvme_update_zone_info() instead of nvme_revalidate_zones(),
simplifying this function. Also use blk_queue_set_zoned() to set the
namespace zoned model.
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@edc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Add nvme_cancel_tagset and nvme_cancel_admin_tagset for tear down and
reconnection error handling.
Signed-off-by: NChao Leng <lengchao@huawei.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Remove the extra space in the nvme_free_cels() when calling
xa_for_each loop which is not a common practice
(except drivers/infiniband/core/ not sure why).
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>