Move out the code which dumps a single FDB to its own function.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rename _mv88e6xxx_vlan_init in _mv88e6xxx_vtu_new, eventually called
from a new _mv88e6xxx_vtu_get function, which abstracts the VTU GetNext
VID-1 trick to retrieve a single entry.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a user explicitly requests VLAN filtering with something like:

    # echo 1 > /sys/class/net/<bridge>/bridge/vlan_filtering

Switchdev propagates a SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING port
attribute.

Add support for it in the DSA layer with a new port_vlan_filtering
function to let drivers toggle 802.1Q filtering on user demand.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
Introduce devlink interface and first drivers to use it

There a is need for some userspace API that would allow to expose things
that are not directly related to any device class like net_device of
ib_device, but rather chip-wide/switch-ASIC-wide stuff.

Use cases:
1) get/set of port type (Ethernet/InfiniBand)
2) setting up port splitters - split port into multiple ones and squash again,
   enables usage of splitter cable
3) setting up shared buffers - shared among multiple ports within
   one chip (work in progress)
4) configuration of switch wide properties - resources division etc - This will
   allow to pass configuration that is unacceptable to be passed as
   a module option.

First patch of this set introduces a new generic Netlink based interface,
called "devlink". It is similar to nl80211 model and it is heavily
influenced by it, including the API definition. The devlink introduction patch
implements use cases 1) and 2). Other 2 are in development atm and will
be addressed by follow-ups.

It is very convenient for drivers to use devlink, as you can see in other
patches in this set.

Counterpart for devlink is userspace tool for now called "dl". Command line
interface and outputs are derived from "ip" tool so it should be easy
for users to get used to it.

It is available here as a standalone tool for now:
https://github.com/jpirko/devlink
After this is merge in kernel, I will include the "dl" or "devlink" tool
into iproute2 toolset.

Port type setting example:
	myhost:~$ dl help
	Usage: dl [ OPTIONS ] OBJECT { COMMAND | help }
	where  OBJECT := { dev | port | monitor }
	       OPTIONS := { -v/--verbose }

	myhost:~$ dl dev help
	Usage: dl dev show [DEV]

	myhost:~$ dl dev show
	pci/0000:01:00.0

	myhost:~$ dl port help
	Usage: dl port show [DEV/PORT_INDEX]
	Usage: dl port set DEV/PORT_INDEX [ type { eth | ib | auto} ]
	Usage: dl port split DEV/PORT_INDEX count
	Usage: dl port unsplit DEV/PORT_INDEX

	myhost:~$ dl port show
	pci/0000:01:00.0/1: type ib ibdev mlx4_0
	pci/0000:01:00.0/2: type ib ibdev mlx4_0

	myhost:~$ sudo dl port set pci/0000:01:00.0/1 type eth

	myhost:~$ dl port show
	pci/0000:01:00.0/1: type eth netdev ens4
	pci/0000:01:00.0/2: type ib ibdev mlx4_0

	myhost:~$ sudo dl port set ens4 type auto

	myhost:~$ dl port show
	pci/0000:01:00.0/1: type eth(auto) netdev ens4
	pci/0000:01:00.0/2: type ib ibdev mlx4_0

Port splitting example:
	myswitch:~$ sudo modprobe mlxsw_pci
	myswitch:~$ dl port
	pci/0000:03:00.0/1: type eth netdev eth0
	pci/0000:03:00.0/3: type eth netdev eth1
	pci/0000:03:00.0/5: type eth netdev eth2
	...
	pci/0000:03:00.0/63: type eth netdev eth31

	myswitch:~$ sudo dl port split pci/0000:03:00.0/1 2   (or "sudo dl port split eth0 2")

	myswitch:~$ dl port
	pci/0000:03:00.0/3: type eth netdev eth1
	pci/0000:03:00.0/5: type eth netdev eth2
	...
	pci/0000:03:00.0/63: type eth netdev eth31
	pci/0000:03:00.0/1: type eth netdev eth0 split_group 16
	pci/0000:03:00.0/2: type eth netdev eth32 split_group 16

	myswitch:~$ sudo dl port unsplit pci/0000:03:00.0/1

	myswitch:~$ dl port
	pci/0000:03:00.0/3: type eth netdev eth1
	pci/0000:03:00.0/5: type eth netdev eth2
	pci/0000:03:00.0/63: type eth netdev eth31
	pci/0000:03:00.0/1: type eth netdev eth0

v2->v3:
patch 1/9
 -removed generated devlink index and name, use bus name and dev name as
  a handle for all userspace originated commands. Along with that,
  remove sysfs stub. Requested by Hannes Sowa.
patch 2/9
 -add dev param to devlink_register (api change)
patch 4/9
 -add dev param to devlink_register (api change)
patch 9/9
 -set port's speed according to width fix by Ido
v1->v2:
patch 1/9
 -removed no longer used "devlink_dev" helper
 -fix couple of typos and misspells
patch 4/9:
 -removed SET_NETDEV_DEV set to devlink dev
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow a user to split or unsplit a port using the newly introduced
devlink ops.

Once split, the original netdev is destroyed and 2 or 4 others are
created, according to user configuration. The new ports are like any
other port, with the sole difference of supporting a lower maximum
speed. When unsplit, the reverse process takes place.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When splitting and unsplitting we'll destroy usable ports on the fly, so
mark them using a NULL pointer to indicate that their local port number
is free and can be re-used.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The port netdevs are each associated with a different local port number
in the device. These local ports are grouped into groups of 4 (e.g.
(1-4), (5-8)) called clusters. The cluster constitutes the one of two
possible modules they can be mapped to. This mapping is board-specific
and done by the device's firmware during init.

When splitting a port by 4, the device requires us to first unmap all
the ports in the cluster and then map each to a single lane in the module
associated with the port netdev used as the handle for the operation.
This means that two port netdevs will disappear, as only 100Gb/s (4
lanes) ports can be split and we are guaranteed to have two of these
((1, 3), (5, 7) etc.) in a cluster.

When unsplit occurs we need to reinstantiate the two original 100Gb/s
ports and map each to its origianl module. Therefore, during driver init
store the initial local port to module mapping, so it can be used later
during unsplitting.

Note that a by 2 split doesn't require us to store the mapping, as we
only need to reinstantiate one port whose module is known.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When splitting a port we replace it with 2 or 4 other ports. To be able
to do that we need to remove the original port netdev and unmap it from
its module. However, we first mark it as disabled, as active ports
cannot be unmapped.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add middle layer in mlxsw core code to forward port split/unsplit calls
into specific ASIC drivers.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement newly introduced devlink interface. Add devlink port instances
for every port and set the port types accordingly.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

So far, there has been an mlx4-specific sysfs file allowing user to
change port type to either Ethernet of InfiniBand. This is very
inconvenient.

Allow to expose the same ability to set port type in a generic way
using devlink interface.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement newly introduced devlink interface. Add devlink port instances
for every port and set the port types accordingly.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
v2->v3:
-add dev param to devlink_register (api change)
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce devlink infrastructure for drivers to register and expose to
userspace via generic Netlink interface.

There are two basic objects defined:
devlink - one instance for every "parent device", for example switch ASIC
devlink port - one instance for every physical port of the device.

This initial portion implements basic get/dump of objects to userspace.
Also, port splitter and port type setting is implemented.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

John Fastabend says:

====================
tc software only

This adds a software only flag to tc but incorporates a bunch of comments
from the original attempt at this.

First instead of having the offload decision logic be embedded in cls_u32
I lifted into cls_pkt.h so it can be used anywhere and named the flag
TCA_CLS_FLAGS_SKIP_HW (Thanks Jiri ;)

In order to do this I put the flag defines in pkt_cls.h as well. However
it was suggested that perhaps these flags could be lifted into the
upper layer of TCA_ as well but I'm afraid this can not be done with
existing tc design as far as I can tell. The problem is the filters are
packed and unpacked in the classifier specific code and pushing the flags
through the high level doesn't seem easily doable. And we already have
this design where classifiers handle generic options such as actions and
policers. So I think adding one more thing here is OK as 'tc', et. al.
already know how to handle this type of thing.
====================
Acked-by: NPravin B Shelar <pshelar@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the initial implementation the only way to stop a rule from being
inserted into the hardware table was via the device feature flag.
However this doesn't work well when working on an end host system
where packets are expect to hit both the hardware and software
datapaths.

For example we can imagine a rule that will match an IP address and
increment a field. If we install this rule in both hardware and
software we may increment the field twice. To date we have only
added support for the drop action so we have been able to ignore
these cases. But as we extend the action support we will hit this
example plus more such cases. Arguably these are not even corner
cases in many working systems these cases will be common.

To avoid forcing the driver to always abort (i.e. the above example)
this patch adds a flag to add a rule in software only. A careful
user can use this flag to build software and hardware datapaths
that work together. One example we have found particularly useful
is to use hardware resources to set the skb->mark on the skb when
the match may be expensive to run in software but a mark lookup
in a hash table is cheap. The idea here is hardware can do in one
lookup what the u32 classifier may need to traverse multiple lists
and hash tables to compute. The flag is only passed down on inserts.
On deletion to avoid stale references in hardware we always try
to remove a rule if it exists.

The flags field is part of the classifier specific options. Although
it is tempting to lift this into the generic structure doing this
proves difficult do to how the tc netlink attributes are implemented
along with how the dump/change routines are called. There is also
precedence for putting seemingly generic pieces in the specific
classifier options such as TCA_U32_POLICE, TCA_U32_ACT, etc. So
although not ideal I've left FLAGS in the u32 options as well as it
simplifies the code greatly and user space has already learned how
to manage these bits ala 'tc' tool.

Another thing if trying to update a rule we require the flags to
be unchanged. This is to force user space, software u32 and
the hardware u32 to keep in sync. Thanks to Simon Horman for
catching this case.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the original series drivers would get offload requests for cls_u32
rules even if the feature bit is disabled. This meant the driver had
to do a boiler plate check on the feature bit before adding/deleting
the rule.

This patch lifts the check into the core code and removes it from the
driver specific case.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The offload decision was originally very basic and tied to if the dev
implemented the appropriate ndo op hook. The next step is to allow
the user to more flexibly define if any paticular rule should be
offloaded or not. In order to have this logic in one function lift
the current check into a helper routine tc_should_offload().
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Paolo Abeni says:

====================
bridge/ovs: avoid skb head copy on frame forwarding

Currently, while when an OVS or Linux bridge is used to forward frames towards
some tunnel device, a skb_head_copy() may occur if the ingress device do not
provide enough headroom for the tx encapsulation.

This patch series tries to address the issue implementing a new ndo operation to
allow the master device to control the headroom used when allocating the skb on
frame reception.

Said operation is used by the Linux bridge to notify the bridged ports of
needed_headroom changes, and similar bookkeeping and behaviour is also added to
openvswitch, on a per datapath basis.

Finally, the operation is implemented for veth and tun device, which give
performance improvement in the 6-12% range when forwarding frames from said
devices towards a vxlan tunnel.

v2:
- fix netdev_get_fwd_headroom() behaviour
- remove some code duplication with the netdev_set_rx_headroom() and
   netdev_reset_rx_headroom() helpers
- handle headroom reset on [v]port removal/deletion
- initialize tun align to the old default value

v3:
- fix a comment typo
====================
Acked-by: NPravin B Shelar <pshelar@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The rx headroom for veth dev is the peer device needed_headroom.
Avoid ping-pong updates setting the private flag IFF_PHONY_HEADROOM.

This avoids skb head reallocation when forwarding from a veth dev
towards a device adding some kind of encapsulation.

When transmitting frames below the MTU size towards a vxlan device,
this gives about 10% performance speed-up when OVS is used to connect
the veth and the vxlan device and a little more when using a
plain Linux bridge.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ndo_set_rx_headroom controls the align value used by tun devices to
allocate skbs on frame reception.
When the xmit device adds a large encapsulation, this avoids an skb
head reallocation on forwarding.

The measured improvement when forwarding towards a vxlan dev with
frame size below the egress device MTU is as follow:

vxlan over ipv6, bridged: +6%
vxlan over ipv6, ovs: +7%

In case of ipv4 tunnels there is no improvement, since the tun
device default alignment provides enough headroom to avoid the skb
head reallocation.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch implements bookkeeping support to compute the maximum
headroom for all the devices in each datapath. When said value
changes, the underlying devs are notified via the
ndo_set_rx_headroom method.

This also increases the internal vports xmit performance.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On bridge needed_headroom changes, the enslaved devices are
notified via the ndo_set_rx_headroom method
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This method allows the controlling device (i.e. the bridge) to specify
additional headroom to be allocated for skb head on frame reception.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: updates for net-next.

Miscellaneous updates covering SRIOV, IRQ coalescing, firmware logging and
package version for net-next.  Thanks.

v2: Updated description and added more comments for patch 1.  Fixed
function parameters formatting for patch 4.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is used to send NVM_FIND_DIR_ENTRY messages which can return error
if the entry is not found.  This is normal and the error message will
cause unnecessary alarm, so silence it.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a new function bnxt_do_send_msg() to do essentially the same thing
with an additional paramter to silence error response messages.  All
current callers will set silent to false.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For everything to fit, we remove the PHY microcode version and replace it
with the firmware package version in the fw_version string.
Signed-off-by: NRob Swindell <swindell@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use appropriate firmware request header structure to prepare the
firmware messages.  This avoids the unnecessary conversion of the
fields to 32-bit fields.  Add appropriate endian conversion when
printing out the message fields in dmesg so that they appear correct
in the log.
Reported-by: NRob Swindell <swindell@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Before this patch, we used a hardcoded value of 500 msec as the default
value for firmware message response timeout.  For better portability with
future hardware or debug platforms, use the value provided by firmware in
the first response and store it for all susequent messages.  Redefine the
macro HWRM_CMD_TIMEOUT to the stored value.  Since we don't have the
value yet in the first message, use the 500 ms default if the stored value
is zero.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When tx and rx rings don't share the same completion ring, tx coalescing
parameters can be set differently from the rx coalescing parameters.
Otherwise, use rx coalescing parameters on shared completion rings.

Adjust rx coalescing default values to lower interrupt rate.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a function to set all the coalescing parameters.  The function can
be used later to set both rx and tx coalescing parameters.

v2: Fixed function parameters formatting requested by DaveM.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't convert these to internal hardware tick values before storing
them.  This avoids the confusion of ethtool -c returning slightly
different values than the ones set using ethtool -C when we convert
hardware tick values back to micro seconds.  Add better comments for
the hardware settings.

Also, rename the current set of coalescing fields with rx_ prefix.
The next patch will add support of tx coalescing values.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During remove_one() when SRIOV is enabled, the PF driver
should broadcast PF driver unload notification to all
VFs that are attached to VMs. Upon receiving the PF
driver unload notification, the VF driver should print
a warning message to message log.  Certain operations on the
VF may not succeed after the PF has unloaded.
Signed-off-by: NJeffrey Huang <huangjw@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow the VF to setup its own MAC address if the PF has not administratively
set it for the VF.  To do that, we should always store the MAC address
from the firmware.  There are 2 cases:

1. The MAC address is valid.  This MAC address is assigned by the PF and
it needs to override the current VF MAC address.

2. The MAC address is zero.  The VF will use a random MAC address by default.
By storing this 0 MAC address in the VF structure, it will allow the VF
user to change the MAC address later using ndo_set_mac_address() when
it sees that the stored MAC address is 0.

v2: Expanded descriptions and added more comments.
Signed-off-by: NJeffrey Huang <huangjw@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'linux-can-next-for-4.6-20160226' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2016-02-26

this is a pull request of 3 patch for net-next/master.

There are two patches by Simon Horman, in which the device tree support
for the rcar_can driver is improved. One patch by me fixes the bad
coding style of the ems_usb driver which was introduced recently.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Woojung Huh says:

====================
lan78xx: driver update

This patch series add new ethtool functions of set_pauseparam  & get_pauseparam
and MAINTAINERS entry.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add maintainers for Microchip LAN78XX.
UNGLinuxDriver@microchip.com is alias email which goes to current
developers work for Microchip Network related products.
Signed-off-by: NWoojung Huh <woojung.huh@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add ethtool operations of set_pauseram and get_pauseparm.
Signed-off-by: NWoojung Huh <woojung.huh@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is not required after commit cd772de3
("phy: keep pause flags in phy driver features")
Signed-off-by: NWoojung Huh <woojung.huh@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace devid to chipid & chiprev for easy access.
Signed-off-by: NWoojung Huh <woojung.huh@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>