platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The structure tap_fops is local to the source and does not need to
be in global scope, so make it static.

Cleans up sparse warning:
symbol 'tap_fops' was not declared. Should it be static?
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The array guest_offloads is local to the source and does not need to
be in global scope, so make it static. Also tweak formatting.

Cleans up sparse warnings:
symbol 'guest_offloads' was not declared. Should it be static?
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Looks  like gcc isn't always able to figure  out that 3 *if* branches in
of_phy_register_fixed_link() calling fixed_phy_register() at their ends
are similar enough and thus can be merged. The "manual" merge saves 40
bytes of the object code (AArch64 gcc 4.8.5), and still saves 12 bytes
even  if gcc was able to merge the branch tails (ARM gcc 4.8.5)...
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

David Ahern says:

====================
net: vrf: Support for local traffic with sockets bound to enslaved devices

This set gets local traffic working for sockets bound to enslaved
devices. The local rtable and rt6_info added in June 2016 to get
local traffic in VRFs working is no longer needed and actually
keeps local traffic for sockets bound to an enslaved device from
working. Patch 1 removes them.

Patch 2 adds a fix up for IPv4 IP_PKTINFO to return rt_iif for
packets sent over the VRF device. This is similar to the handling
of loopback.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similar to the loopback device, for packets sent through a VRF device
the index returned in ipi_ifindex needs to be the saved index in
rt_iif.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The VRF cached rtable and rt6_info for local traffic are no longer
needed and actually prevent local traffic through enslaved devices.
Remove them.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

rt_iif is going to be set to either 0 or orig_oif. If orig_oif
is 0 it amounts to the same end result so remove the check.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The kernel log is not where users expect error messages for netlink
requests; as we have extended acks now, we can replace pr_debug() with
NL_SET_ERR_MSG_ATTR().
Signed-off-by: NMatthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: NGirish Moodalbail <girish.moodalbail@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jason Wang says:

====================
XDP support for tap

This series tries to implement XDP support for tap. Two path were
implemented:

- fast path: small & non-gso packet, For performance reason we do it
  at page level and use build_skb() to create skb if necessary.
- slow path: big or gso packet, we don't want to lose the capability
  compared to generic XDP, so we export some generic xdp helpers and
  do it after skb was created.

xdp1 shows about 41% improvement, xdp_redirect shows about 60%
improvement.

Changes from V1:
- fix the race between xdp set and free
- don't hold extra refcount
- add XDP_REDIRECT support

Please review.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch tries to implement XDP for tun. The implementation was
split into two parts:

- fast path: small and no gso packet. We try to do XDP at page level
  before build_skb(). For XDP_TX, since creating/destroying queues
  were completely under control of userspace, it was implemented
  through generic XDP helper after skb has been built. This could be
  optimized in the future.
- slow path: big or gso packet. We try to do it after skb was created
  through generic XDP helpers.

Test were done through pktgen with small packets.

xdp1 test shows ~41.1% improvement:

Before: ~1.7Mpps
After:  ~2.3Mpps

xdp_redirect to ixgbe shows ~60% improvement:

Before: ~0.8Mpps
After:  ~1.38Mpps
Suggested-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch tries to export some generic xdp helpers to drivers. This
can let driver to do XDP for a specific skb. This is useful for the
case when the packet is hard to be processed at page level directly
(e.g jumbo/GSO frame).

With this patch, there's no need for driver to forbid the XDP set when
configuration is not suitable. Instead, it can defer the XDP for
packets that is hard to be processed directly after skb is created.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate
skb in the past. This socket based method is not suitable for high
speed userspace like virtualization which usually:

- ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as
  possible
- don't want to be block at sendmsg()

To eliminate the above overheads, this patch tries to use build_skb()
for small packet. We will do this only when the following conditions
are all met:

- TAP instead of TUN
- sk_sndbuf is INT_MAX
- caller don't want to be blocked
- zerocopy is not used
- packet size is smaller enough to use build_skb()

Pktgen from guest to host shows ~11% improvement for rx pps of tap:

Before: ~1.70Mpps
After : ~1.88Mpps

What's more important, this makes it possible to implement XDP for tap
before creating skbs.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Calls to rtnl_dump_ifinfo() are protected by RTNL lock. So are the
{list,unlist}_netdevice() calls where we bump the net->dev_base_seq
number.

For this reason net->dev_base_seq can't change under out feet while
we're looping over links in rtnl_dump_ifinfo(). So move the check for
net->dev_base_seq change (since the last time we were called) out of the
loop.

This way we avoid giving a wrong impression that there are concurrent
updates to the link list going on while we're iterating over them.
Signed-off-by: NJakub Sitnicki <jkbs@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ptp_enable was a global static variable.  Moved this global variable to
octeon_device structure and removed extra device id check.
Signed-off-by: NIntiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Kernel test robot reports error when running test_xdp_redirect.sh.
Check if ip tool supports xdpgeneric, if not, skip the test.
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make these structures const as they only stored in the profile field of
a mlxsw_driver structure, which is of type const.
Done using Coccinelle.
Signed-off-by: NBhumika Goyal <bhumirks@gmail.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

OVS_NLERR already adds a newline so these just add blank
lines to the logging.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NJoe Stringer <joe@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The firmware expects a MAC_REPR control message when a MAC representor
is created. The driver should expect a PORTMOD message to follow which
will provide the link states of the physical port associated with the MAC
representor.
Signed-off-by: NSimon Horman <simon.horman@netronome.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Because we remove the UFO support, we will also remove the
CHECKSUM_UNNECESSARY check in skb_needs_check().

Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: NTonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make use the dma_*() interfaces rather than the pci_*() interfaces.
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver does not check if mapping dma memory succeed.
The patch adds the checks and failure handling.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Attempts to connect to a local address with a socket bound
to a device with the local address hangs if there is no listener:

  $ ip addr sh dev eth1
  3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether 02:e0:f9:1c:00:37 brd ff:ff:ff:ff:ff:ff
    inet 10.100.1.4/24 scope global eth1
       valid_lft forever preferred_lft forever
    inet6 2001:db8:1::4/120 scope global
       valid_lft forever preferred_lft forever
    inet6 fe80::e0:f9ff:fe1c:37/64 scope link
       valid_lft forever preferred_lft forever

  $ vrf-test -I eth1 -r 10.100.1.4
  <hangs when there is no server>

(don't let the command name fool you; vrf-test works without vrfs.)

The problem is that the original intended device, eth1 in this case, is
lost when the tcp reset is sent, so the socket lookup does not find a
match for the reset and the connect attempt hangs. Fix by adjusting
orig_oif for local traffic to the device from the fib lookup result.

With this patch you get the more user friendly:
  $ vrf-test -I eth1 -r 10.100.1.4
  connect failed: 111: Connection refused

orig_oif is saved to the newly created rtable as rt_iif and when set
it is used as the dif for socket lookups. It is set based on flowi4_oif
passed in to ip_route_output_key_hash_rcu and will be set to either
the loopback device, an l3mdev device, nothing (flowi4_oif = 0 which
is the case in the example above) or a netdev index depending on the
lookup path. In each case, resetting orig_oif to the device in the fib
result for the RTN_LOCAL case allows the actual device to be preserved
as the skb tx and rx is done over the loopback or VRF device.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implemented workarounds for the following dTSEC Erratum:
A002, A004, A0012, A0014, A004839 on several operations
that involve MAC CFG register changes: adjust link,
rx pause frames, modify MAC address.
Signed-off-by: NFlorinel Iordache <florinel.iordache@nxp.com>
Acked-by: NMadalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These were copy and paste bugs, but I believe they are harmless.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This function has a copy and paste bug so it accidentally calls the add
function instead of the delete function.

Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

David Wu says:

====================
rockchip: Add the integrated PHY support

The rk3228 and rk3328 support integrated PHY inside, let's enable
it to work. And the integrated PHY need to do some special setting,
so register the rockchip integrated PHY driver.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enable the gmac2phy, make the gmac2phy work on
the rk3328-evb board.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The gmac2phy controller of rk3328 is connected to integrated PHY
directly inside, add the node for the integrated PHY support.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch enables the integrated PHY for rk3228 evb board
by default.
To use the external 1000M PHY on evb board, need to make
some switch of evb board to be on.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are two mac controllers in the rk3328, the one connects
to external PHY, and the other one connects to integrated PHY.
Like the mac of external PHY, the integrated PHY's mac also
needs to configure the related mac registers at GRF.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is only one mac controller in rk3228, which could connect to
external PHY or integrated PHY, use the grf_com_mux bit15 to route
external/integrated PHY.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To make integrated PHY work, need to configure the PHY clock,
PHY cru reset and related registers.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the documentation for integrated PHY. A boolean property indicates
the PHY is integrated into the same physical package as the Ethernet
MAC. If needed, muxers should be configured to ensure the integrated
PHY is used. The absence of this property indicates the muxers should
be configured so that the external PHY is used.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is wrong setting for rk3328_set_to_rmii(), so remove it.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make the rockchip PHY driver built into the kernel.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enable the rockchip PHY driver for multi_v7_defconfig builds.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Support integrated ethernet PHY currently.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace init_timer_deferrable with setup_deferrable_timer to simplify
the source code.
Signed-off-by: NZhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Frequency can be adjusted in DT it make sense to
print current used value on driver init.
Signed-off-by: NMax Uvarov <muvarov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>