- 16 10月, 2018 4 次提交
-
-
由 Michael Chan 提交于
New firmware spec. allows interrupt coalescing parameters, such as maximums, timer units, supported features to be queried. Update the driver to make use of the new call to query these parameters and provide the legacy defaults if the call is not available. Replace the hard-coded values with these parameters. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Support the max_ext_req_len field from the HWRM_VER_GET_RESPONSE. If this field is valid and greater than the mailbox size, use the short command format to send firmware messages greater than the mailbox size. Newer devices use this method to send larger messages to the firmware. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Latest firmware spec. has some additional rx extended port stats and new tx extended port stats added. We now need to check the size of the returned rx and tx extended stats and determine how many counters are valid. New counters added include CoS byte and packet counts for rx and tx. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Among the new changes are trusted VF support, 200Gbps support, and new API to dump ring information on the new chips. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 10月, 2018 1 次提交
-
-
由 Gustavo A. R. Silva 提交于
There is no need to compare *val.vu32* with < 0 because such variable is of type u32 (32 bits, unsigned), making it impossible to hold a negative value. Fix this by removing such comparison. Also, initialize variable *max_val* to -1, just in case it is not initialized to either BNXT_MSIX_VEC_MAX or BNXT_MSIX_VEC_MIN_MAX before using it in a comparison with val.vu32 at line 159: if (val.vu32 > max_val) Addresses-Coverity-ID: 1473915 ("Unsigned compared against 0") Addresses-Coverity-ID: 1473920 ("Uninitialized scalar variable") Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 10月, 2018 8 次提交
-
-
由 Vasundhara Volam 提交于
When getting the max rings supported, get the reduced max_irqs by the ones used by RDMA. If the number MSIX is the limiting factor, this bug may cause the max ring count to be higher than it should be when RDMA driver is loaded and may result in ring allocation failures. Fixes: 30f52947 ("bnxt_en: Do not modify max IRQ count after RDMA driver requests/frees IRQs.") Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Venkat Duvvuru 提交于
When the driver probe fails, all the resources that were allocated prior to the failure must be freed. However, hwrm dma response memory is not getting freed. This patch fixes the problem described above. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: NVenkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasundhara Volam 提交于
In HWRM_QUEUE_COS2BW_CFG request, enables field should have the bits set only for the queue ids which are having the valid parameters. This causes firmware to return error when the TC to hardware CoS queue mapping is not 1:1 during DCBNL ETS setup. Fixes: 2e8ef77e ("bnxt_en: Add TC to hardware QoS queue mapping logic.") Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The enables bit for VNIC was set wrong when calling the HWRM_FUNC_CFG firmware call to reserve VNICs. This has the effect that the firmware will keep a large number of VNICs for the PF, and having very few for VFs. DPDK driver running on the VFs, which requires more VNICs, may not work properly as a result. Fixes: 674f50a5 ("bnxt_en: Implement new method to reserve rings.") Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasundhara Volam 提交于
This patch adds following driver-specific permanent mode boolean parameter. gre_ver_check - Generic Routing Encapsulation(GRE) version check will be enabled in the device. If disabled, device skips version checking for GRE packets. Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasundhara Volam 提交于
This patch adds support for following generic permanent mode devlink parameters. They can be modified using devlink param commands. msix_vec_per_pf_max - This param sets the number of MSIX vectors that the device requests from the host on driver initialization. This value is set in the device which limits MSIX vectors per PF. msix_vec_per_pf_min - This param sets the number of minimal MSIX vectors required for the device initialization. Value 0 indicates a default value is selected. This value is set in the device which limits MSIX vectors per PF. Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasundhara Volam 提交于
Return proper error code when Firmware returns HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED for HWRM_NVM_GET/SET_VARIABLE commands. Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasundhara Volam 提交于
This patch adds support for ignore_ari generic permanent mode devlink parameter. This parameter is disabled by default. It can be enabled using devlink param commands. ignore_ari - If enabled, device ignores ARI(Alternate Routing ID) capability, even when platforms has the support and creates same number of partitions when platform does not support ARI capability. Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 10月, 2018 1 次提交
-
-
由 Eli Britstein 提交于
Add extack argument to the eswitch related operations. Signed-off-by: NEli Britstein <elibr@mellanox.com> Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NRoi Dayan <roid@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
- 27 9月, 2018 1 次提交
-
-
由 Michael Chan 提交于
The current netpoll implementation in the bnxt_en driver has problems that may miss TX completion events. bnxt_poll_work() in effect is only handling at most 1 TX packet before exiting. In addition, there may be in flight TX completions that ->poll() may miss even after we fix bnxt_poll_work() to handle all visible TX completions. netpoll may not call ->poll() again and HW may not generate IRQ because the driver does not ARM the IRQ when the budget (0 for netpoll) is reached. We fix it by handling all TX completions and to always ARM the IRQ when we exit ->poll() with 0 budget. Also, the logic to ACK the completion ring in case it is almost filled with TX completions need to be adjusted to take care of the 0 budget case, as discussed with Eric Dumazet <edumazet@google.com> Reported-by: NSong Liu <songliubraving@fb.com> Reviewed-by: NSong Liu <songliubraving@fb.com> Tested-by: NSong Liu <songliubraving@fb.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 9月, 2018 1 次提交
-
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. bnxt uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 9月, 2018 1 次提交
-
-
由 Davide Caratti 提交于
bnxt offload code currently supports only 'push' and 'pop' operation: let .ndo_setup_tc() return -EOPNOTSUPP if VLAN 'modify' action is configured. Fixes: 2ae7408f ("bnxt_en: bnxt: add TC flower filter offload support") Signed-off-by: NDavide Caratti <dcaratti@redhat.com> Acked-by: NSathya Perla <sathya.perla@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 9月, 2018 1 次提交
-
-
由 zhong jiang 提交于
Fix the following compile warning: drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c:49:5: warning: nvm_param.dir_type may be used uninitialized in this function [-Wmaybe-uninitialized] if (nvm_param.dir_type == BNXT_NVM_PORT_CFG) Signed-off-by: Nzhong jiang <zhongjiang@huawei.com> Acked-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 9月, 2018 1 次提交
-
-
由 Michael Chan 提交于
The recent commit to always forward the VF MAC address to the PF for approval may not work if the PF driver or the firmware is older. This will cause the VF driver to fail during probe: bnxt_en 0000:00:03.0 (unnamed net_device) (uninitialized): hwrm req_type 0xf seq id 0x5 error 0xffff bnxt_en 0000:00:03.0 (unnamed net_device) (uninitialized): VF MAC address 00:00:17:02:05:d0 not approved by the PF bnxt_en 0000:00:03.0: Unable to initialize mac address. bnxt_en: probe of 0000:00:03.0 failed with error -99 We fix it by treating the error as fatal only if the VF MAC address is locally generated by the VF. Fixes: 707e7e96 ("bnxt_en: Always forward VF MAC address to the PF.") Reported-by: NSeth Forshee <seth.forshee@canonical.com> Reported-by: NSiwei Liu <loseweigh@gmail.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 9月, 2018 1 次提交
-
-
由 YueHaibing 提交于
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c: In function 'bnxt_tc_parse_flow': drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c:186:6: warning: variable 'addr_type' set but not used [-Wunused-but-set-variable] Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 9月, 2018 3 次提交
-
-
由 Michael Chan 提交于
Currently, the driver adjusts the bp->hw_resc.max_cp_rings by the number of MSIX vectors used by RDMA. There is one code path in open that needs to check the true max_cp_rings including any used by RDMA. This code is now checking for the reduced max_cp_rings which will fail when the number of cp rings is very small. To fix this in a clean way, we don't adjust max_cp_rings anymore. Instead, we add a helper bnxt_get_max_func_cp_rings_for_en() to get the reduced max_cp_rings when appropriate. Fixes: ec86f14e ("bnxt_en: Add ULP calls to stop and restart IRQs.") Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Remove unused bnxt_subtract_ulp_resources(). Change bnxt_get_max_func_irqs() to static since it is only locally used. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
When the driver detects that resources have changed during open, it should reset the rx and tx rings to 0. This will properly setup the init sequence to initialize the default rings again. We also need to signal the RDMA driver to stop and clear its interrupts. We then call the RoCE driver to restart if a new set of default rings is successfully reserved. Fixes: 25e1acd6 ("bnxt_en: Notify firmware about IF state changes.") Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 9月, 2018 1 次提交
-
-
由 YueHaibing 提交于
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c: In function 'bnxt_vf_rep_rx': drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c:212:28: warning: variable 'rx_stats' set but not used [-Wunused-but-set-variable] struct bnxt_vf_rep_stats *rx_stats; Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 8月, 2018 1 次提交
-
-
由 Cong Wang 提交于
After commit 90b73b77, list_head is no longer needed. Now we just need to convert the list iteration to array iteration for drivers. Fixes: 90b73b77 ("net: sched: change action API to use array of pointers to actions") Cc: Jiri Pirko <jiri@mellanox.com> Cc: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 8月, 2018 2 次提交
-
-
由 Arnd Bergmann 提交于
The bnxt_coredump_record structure is very long, causing a warning about possible stack overflow on 32-bit architectures: drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c: In function 'bnxt_get_coredump': drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:2989:1: error: the frame size of 1188 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] I could not see any reason to operate on an on-stack copy of the structure before copying it back into the caller-provided buffer, which also simplifies the code here. Fixes: 6c5657d0 ("bnxt_en: Add support for ethtool get dump.") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
The utsname()->nodename string may be 64 bytes long, and it gets copied without the trailing nul byte into the shorter record->system_name, as gcc now warns: In file included from include/linux/bitmap.h:9, from include/linux/ethtool.h:16, from drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:13: In function 'strncpy', inlined from 'bnxt_fill_coredump_record' at drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:2863:2: include/linux/string.h:254:9: error: '__builtin_strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation] Using strlcpy() at least avoids overflowing the destination buffer and adds proper nul-termination. It may still truncate long names though, which probably can't be solved here. Fixes: 6c5657d0 ("bnxt_en: Add support for ethtool get dump.") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 8月, 2018 1 次提交
-
-
由 Vasundhara Volam 提交于
This patch fixes following smatch warnings: drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:2826 bnxt_fill_coredump_seg_hdr() error: strcpy() '"sEgM"' too large for 'seg_hdr->signature' (5 vs 4) drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:2858 bnxt_fill_coredump_record() error: strcpy() '"cOrE"' too large for 'record->signature' (5 vs 4) drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:2879 bnxt_fill_coredump_record() error: strcpy() 'utsname()->sysname' too large for 'record->os_name' (65 vs 32) Fixes: 6c5657d0 ("bnxt_en: Add support for ethtool get dump.") Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 8月, 2018 1 次提交
-
-
由 Gustavo A. R. Silva 提交于
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 114878 ("Missing break in switch") Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 8月, 2018 11 次提交
-
-
由 Michael Chan 提交于
The CNP CoS queue is reserved for internal RDMA Congestion Notification Packets (CNP) and should not be used for a TC. Modify the CoS queue discovery code to skip over the CNP CoS queue and to reduce bp->max_tc accordingly. However, if RDMA is disabled in NVRAM, the the CNP CoS queue can be used for a TC. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Expand the .ieee_setapp() and ieee_delapp() DCBNL methods to support DSCP. This allows DSCP values to user priority mappings instead of using VLAN priorities. Each DSCP mapping is added or deleted one entry at a time using the firmware API. The firmware call can only be made from a PF. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasundhara Volam 提交于
Export temperature sensor reading via hwmon sysfs. Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Use latest firmware API to notify firmware about IF state changes. Firmware has the option to clean up resources during IF down and to require the driver to reserve resources again during IF up. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The flags field is almost getting full. Move firmware capability flags to a new fw_cap field to better organize these firmware flags. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The BNXT_FLAG_NEW_RM flag is checked a lot in the code to determine if the new resource manager is in effect. Define a macro to perform this check. Signed-off-by: NMichael Chan <michael.chan@broadocm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasundhara Volam 提交于
Add support to collect live firmware coredump via ethtool. Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Set the default hash mode flag in HWRM_VNIC_RSS_CFG to signal to the firmware that the driver is compliant with the latest spec. With that, the firmware can return expanded RSS profile IDs that the driver checks to setup the proper gso_type for GRO-HW packets. But instead of checking for the new profile IDs, we check the IP_TYPE flag in TPA_START which is more straight forward than checking a list of profile IDs. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The new mode is "minimal-static" to be used when resources are more limited to support a large number of VFs, for example The PF driver will provision guaranteed minimum resources of 0. Each VF has no guranteed resources until it tries to reserve resources during device open. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
During hotplug, the driver's open function can be called almost immediately after power on reset. The PHY may not be ready and the firmware may return failure when the driver tries to update PHY settings. Add retry logic fired from the driver's timer to retry the operation for 5 seconds. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add code to detect firmware support for external loopback and the extra test entry for external loopback. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-