- 12 7月, 2017 1 次提交
-
-
由 Horia Geantă 提交于
Driver does not properly handle the case when signals interrupt wait_for_completion_interruptible(): -it does not check for return value -completion structure is allocated on stack; in case a signal interrupts the sleep, it will go out of scope, causing the worker thread (caam_jr_dequeue) to fail when it accesses it wait_for_completion_interruptible() is replaced with uninterruptable wait_for_completion(). We choose to block all signals while waiting for I/O (device executing the split key generation job descriptor) since the alternative - in order to have a deterministic device state - would be to flush the job ring (aborting *all* in-progress jobs). Cc: <stable@vger.kernel.org> Fixes: 045e3678 ("crypto: caam - ahash hmac support") Fixes: 4c1ec1f9 ("crypto: caam - refactor key_gen, sg") Signed-off-by: NHoria Geantă <horia.geanta@nxp.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 05 7月, 2017 2 次提交
-
-
由 Herbert Xu 提交于
It has been reported that sha1-avx2 can cause page faults by reading beyond the end of the input. This patch disables it until it can be fixed. Cc: <stable@vger.kernel.org> Fixes: 7c1da8d0 ("crypto: sha - SHA1 transform x86_64 AVX2") Reported-by: NJan Stancek <jstancek@redhat.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Herbert Xu 提交于
Merge the crypto tree to pull in fixes for the next merge window.
-
- 28 6月, 2017 1 次提交
-
-
由 Herbert Xu 提交于
The combination of sha1 and aes was disabled in FIPS Mode accidentally. This patch reenables it. Fixes: 284a0f6e ("crypto: testmgr - Disable fips-allowed for...") Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Acked-by: NStephan Müller <smueller@chronox.de>
-
- 22 6月, 2017 7 次提交
-
-
由 Gary R Hook 提交于
krobot warning: make sure that all error return paths release locks. Signed-off-by: NGary R Hook <gary.hook@amd.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Dan Carpenter 提交于
We want to return negative error codes here, but we're accidentally propogating the "true" return from dma_mapping_error(). Fixes: 14fa93cd ("crypto: cavium - Add support for CNN55XX adapters.") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Benjamin Peterson 提交于
Signed-off-by: NBenjamin Peterson <bp@benjamin.pe> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Ténart 提交于
The Inside Secure Safexcel cryptographic engine is found on some Marvell SoCs (7k/8k). Document the bindings used by its driver. Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Horia Geantă 提交于
This is the 2nd part of fixing the usage of GFP_KERNEL for memory allocations, taking care off all the places that haven't caused a real problem / failure. Again, the issue being fixed is that GFP_KERNEL should be used only when MAY_SLEEP flag is set, i.e. MAY_BACKLOG flag usage is orthogonal. Signed-off-by: NHoria Geantă <horia.geanta@nxp.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Horia Geantă 提交于
Changes in the SW cts (ciphertext stealing) code in commit 0605c41c ("crypto: cts - Convert to skcipher") revealed a problem in the CAAM driver: when cts(cbc(aes)) is executed and cts runs in SW, cbc(aes) is offloaded in CAAM; cts encrypts the last block in atomic context and CAAM incorrectly decides to use GFP_KERNEL for memory allocation. Fix this by allowing GFP_KERNEL (sleeping) only when MAY_SLEEP flag is set, i.e. remove MAY_BACKLOG flag. We split the fix in two parts - first is sent to -stable, while the second is not (since there is no known failure case). Link: http://lkml.kernel.org/g/20170602122446.2427-1-david@sigma-star.at Cc: <stable@vger.kernel.org> # 4.8+ Reported-by: NDavid Gstir <david@sigma-star.at> Signed-off-by: NHoria Geantă <horia.geanta@nxp.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Stephan Mueller 提交于
Initialise ctr_completion variable before use. Cc: <stable@vger.kernel.org> Signed-off-by: NHarsh Jain <harshjain.prof@gmail.com> Signed-off-by: NStephan Mueller <smueller@chronox.de> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 20 6月, 2017 29 次提交
-
-
由 Arvind Yadav 提交于
of_device_ids are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs as const. File size before: text data bss dec hex filename 2376 808 128 3312 cf0 drivers/crypto/caam/jr.o File size after constify caam_jr_match: text data bss dec hex filename 2976 192 128 3296 ce0 drivers/crypto/caam/jr.o Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tudor-Dan Ambarus 提交于
You can't reach init() if parent alg_name is invalid. Moreover, cypto_alloc_base() will return ENOENT if alg_name is NULL. Found while grasping the fallback mechanism. Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Arvind Yadav 提交于
of_device_ids are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs as const. File size before: text data bss dec hex filename 2001 2168 48 4217 1079 drivers/crypto/n2_core.o File size after constify dummy_tlb_ops.: text data bss dec hex filename 3601 536 48 4185 1059 drivers/crypto/n2_core.o Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Ténart 提交于
A base_end pointer is set and provided. Use it in the ring rollback function to avoid using build-in defines. Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Ténart 提交于
Increase the batch size to the maximum number of requests a ring can handle at a time (its size). This is possible now that the request queues are per hw ring. This improves performances. Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Ténart 提交于
This force the need_dequeue flag to be unset whenever the dequeue function is called, to avoid calling it when it is not necessary. Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Ténart 提交于
Get the backlog before dequeuing the request otherwise we'll miss the first request in line. Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Ténart 提交于
This update the dequeue function of the inside-secure safexcel driver so that failed requests aren't requeued when they fail (for whatever reason, which can be because the hw ring is full). Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Ténart 提交于
Update the inside-secure safexcel driver from using one global queue to one queue per hw ring. This ease the request management and keep the hw in sync with what's done in sw. Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Ténart 提交于
This move the context and request updates at the end of the cipher and hash send() functions. This way the context and request fields are set only when everything else was successful in the send() functions. Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ofer Heifetz 提交于
The cipher and hash send functions both set the results variable, to be used later by the caller. Align the way they're setting this variable. Signed-off-by: NOfer Heifetz <oferh@marvell.com> Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Igal Liberman 提交于
Configure the data write bufferability to always buffer packets in the DSE. This change slightly improves performance. Signed-off-by: NIgal Liberman <igall@marvell.com> Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Igal Liberman 提交于
When enable_single_wr is not enabled, the DSE will only write those parts of a result descriptor that need updating, which means a final result descriptor will be written in 2 or 3 smaller transfers. When enable_single_wr is enabled the DSE will combine these 2-3 updates into one large write transfer, generally improving performance. Signed-off-by: NIgal Liberman <igall@marvell.com> Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Ténart 提交于
Set the correct value to the DSE data cache, using WR_CACHE_3BITS instead of RD_CACHE_3BITS. This fixes an incorrect setting and helps improving performances. Reported-by: NIgal Liberman <igall@marvell.com> Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Ténart 提交于
The EIP197_HIA_xDR_CFG_WR_CACHE macro was defined to use an offset of 23, which is wrong as it's actually 25. Fix this. Reported-by: NIgal Liberman <igall@marvell.com> Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Ténart 提交于
Replace the hmac ipad/opad values by their defined constants. Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Harsh Jain 提交于
When multiple devices are present in system select device in round-robin fashion for crypto operations Signed-off-by: NAtul Gupta <atul.gupta@chelsio.com> Reviewed-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Harsh Jain 提交于
Allocate new sg list in case received destination sg list has entry greater that 2k. Signed-off-by: NHarsh Jain <harsh@chelsio.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Harsh Jain 提交于
Add myself as maintainer for chcr. Signed-off-by: NHarsh Jain <harsh@chelsio.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Harsh Jain 提交于
Count types of operation done by HW. Signed-off-by: NHarsh Jain <harsh@chelsio.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Harsh Jain 提交于
It send multiple WRs to H/W to handle large sg lists. Adds ctr(aes) and rfc(ctr(aes)) modes. Signed-off-by: NHarsh Jain <harsh@chelsio.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Harsh Jain 提交于
Do not update assoclen received in aead_request. Signed-off-by: NHarsh Jain <harsh@chelsio.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Harsh Jain 提交于
Return correct error instead of EINVAL. Signed-off-by: NHarsh Jain <harsh@chelsio.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Harsh Jain 提交于
Set key of fallback tfm for rfc4309. Signed-off-by: NHarsh Jain <harsh@chelsio.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Harsh Jain 提交于
GCM and CBC mode of operation requires Last Cipher Block. This patch set lcb bit in WR header when required. Signed-off-by: NHarsh Jain <harsh@chelsio.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Colin Ian King 提交于
Trivial fix to spelling mistake in seq_printf message Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Colin Ian King 提交于
Trivial fix to spelling mistake in pr_err message Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Stephan Mueller 提交于
The PKCS#1 RSA implementation is provided with a self test with RSA 2048 and SHA-256. This self test implicitly covers other RSA keys and other hashes. Also, this self test implies that the pkcs1pad(rsa) is FIPS 140-2 compliant. Signed-off-by: NStephan Mueller <smueller@chronox.de> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Sean Wang 提交于
I work for MediaTek on maintaining the MediaTek RNG driver for the existing SoCs and adding support for the following SoCs. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-