- 17 2月, 2009 1 次提交
-
-
由 Gregory CLEMENT 提交于
Add support for inverted rdy_busy pin for Atmel nand device controller It will fix building error on NeoCore926 board. Acked-by: NAndrew Victor <linux@maxim.org.za> Acked-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NGregory CLEMENT <gclement@adeneo.adetelgroup.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 31 1月, 2009 1 次提交
-
-
由 Uwe Kleine-König 提交于
"flash" is a very generic name for a platform_driver that is only available on SA11x0. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Nicolas Pitre <nico@marvell.com>
-
- 28 1月, 2009 1 次提交
-
-
由 Stephen Rothwell 提交于
These are all powerpc specific drivers. res.start in fsl_elbc_nand.c needs to be cast since it may be either 32 or 64 bit. Thanks to Scott Wood for noticing. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: Arnd Bergmann <arnd@arndb.de> call_edac bits in particular Acked-by: Olof Johansson <olof@lixom.net> pasemi_nand peices Acked-by: Scott Wood <scottwood@freescale.com> fsl_elbc fixes Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 27 1月, 2009 1 次提交
-
-
由 Sidney Amani 提交于
Introduce a new ioctl UBI_IOCSETPROP to set properties on a volume. Also add the first property: UBI_PROP_DIRECT_WRITE, this property is used to set the ability to use direct writes in userspace Signed-off-by: NSidney Amani <seed@uffs.org> Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 21 1月, 2009 2 次提交
-
-
由 Artem Bityutskiy 提交于
GregKH asked to fix UBI which has fake device release method. Indeed, we have to free UBI device description object from the release method, because otherwise we'll oops is someone opens a UBI device sysfs file, then the device is removed, and he reads the file. With this fix, he will get -ENODEV instead of an oops. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 18 1月, 2009 8 次提交
-
-
由 Artem Bityutskiy 提交于
Get rid of 'do_div()' and use more user-friendly primitives from 'linux/math64.h'. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
UBI ioctl's do not work when running 64-bit kernel and 32-bit user-land. Fix this by adding the compat_ioctl method. Also, UBI serializes all ioctls, so more than one ioctl at a time is not a problem. Amd UBI does not seem to depend on anything else, so use unlocked_ioctl instead of ioctl (no BKL needed). Reported-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Reviewed-by: NArnd Bergmann <arnd@arndb.de>
-
由 Jan Engelhardt 提交于
Signed-off-by: NJan Engelhardt <jengelh@medozas.de> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
Some ioctl's in UBI are enabled only when debugging is switched on. There is not particular reason for this, just noone needed them. However, some people need the now for their user-space development. Thus, allow these ioctl's even if UBI debugging is disabled. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Corentin Chary 提交于
This patch adds ioctl to check if an LEB is mapped or not (as a debugging option so far). [Re-named ioctl to make it look the same as the other one and made some minor stylistic changes. Artem Bityutskiy.] Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Corentin Chary 提交于
This patch adds ioctl for the LEB unmap operation (as a debugging option so far). [Re-named ioctl to make it look the same as the other one and made some minor stylistic changes. Artem Bityutskiy.] Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Corentin Chary 提交于
This patch adds ioctl for the LEB map operation (as a debugging option so far). [Re-named ioctl to make it look the same as the other one and made some minor stylistic changes. Artem Bityutskiy.] Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 15 1月, 2009 1 次提交
-
-
由 Jarkko Nikula 提交于
Fix compile by removing remaining omap specific gpio calls. Based on earlier patches by Jarkko Nikula. Also remove old GPIO key code, there is already a patch to do this with gpio_keys. Signed-off-by: NJarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 09 1月, 2009 4 次提交
-
-
由 David Woodhouse 提交于
MTD size is 64-bit now... Pointed out by Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Philip Rakity 提交于
[dwmw2: updated and made to still register whole device first] Signed-off-by: NPhilip Rakity <pakity@yahoo.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Wolfgang Grandegger 提交于
The NOR Flash memory K8P2815UQB from Samsung uses the major version number '0'. Add a quirk to cope with it. Signed-off-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Coly Li 提交于
When I review ocfs2 code, find there are 2 typos to "successfull". After doing grep "successfull " in kernel tree, 22 typos found totally -- great minds always think alike :) This patch fixes all the similar typos. Thanks for Randy's ack and comments. Signed-off-by: NColy Li <coyli@suse.de> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NRoland Dreier <rolandd@cisco.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 1月, 2009 7 次提交
-
-
由 Geoff Levand 提交于
Use _PAGE_NO_CACHE for gpu memory ioremap. Also, add __iomem attribute to gpu memory pointer and change use of memset() to memset_io(). Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Geoff Levand 提交于
Replace the use of udelay() with msleep() in the looping wait routines ps3vram_notifier_wait() and ps3vram_wait_ring(). Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Geoff Levand 提交于
Replace the use of stdint.h types with kernel types in the ps3vram driver. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Geoff Levand 提交于
Cleanup the ps3vram driver messages. Add a new struct device pointer variable dev to struct ps3vram_priv and use dev_dbg(), pr_dbg(), etc. where appropriate. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Geoff Levand 提交于
Remove the ps3vram debug routines ps3vram_dump_ring() and ps3vram_dump_reports(). These routines are not needed. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Geert Uytterhoeven 提交于
Update ps3vram driver to use the new ps3 three id modalias support. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Jim Paris 提交于
Add ps3vram driver, which exposes unused video RAM on the PS3 as a MTD device suitable for storage or swap. Fast data transfer is achieved using a local cache in system RAM and DMA transfers via the GPU. Signed-off-by: NVivien Chappelier <vivien.chappelier@free.fr> Signed-off-by: NJim Paris <jim@jtan.com> Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com> Acked-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 07 1月, 2009 1 次提交
-
-
由 Kay Sievers 提交于
CC: David Woodhouse <dwmw2@infradead.org> Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 06 1月, 2009 3 次提交
-
-
由 Frederik Schwarzer 提交于
- (better, more, bigger ...) then -> (...) than Signed-off-by: NFrederik Schwarzer <schwarzerf@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Sean MacLennan 提交于
The current ndfc driver only compiles under arch/ppc. This arch was removed from the kernel. I notice the event entry for the ndfc in Kconfig has been removed in 2.6.28. This patch converts the ndfc to a proper OF (OpenFirmware) driver. I can give a working example of the DTS if needed. The patch has been in production use on the PIKA Warp Appliance and is in use by others. The Warp basically boots from NAND, so the ndfc driver is very important to us. Signed-off-by: NSean MacLennan <smaclennan@pikatech.com> Acked-By: NJosh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 David Woodhouse 提交于
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
- 05 1月, 2009 8 次提交
-
-
由 Alexey Korolev 提交于
We have two components to manage LPDDR flash memories in Linux. 1. It is a driver for chip probing and reading its capabilities 2. It is a device operations driver. Signed-off-by: NAlexey Korolev <akorolev@infradead.org> Acked-by: NJared Hulbert <jaredeh@gmail.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Alexey Korolev 提交于
Physmap is a generic map driver for different platforms and flash types. We added support of LPDDR to physmap. All changes here are related to introduction of new pfow_base parameter. This parameter is valid in case of LPDDR chips only. Signed-off-by: NAlexey Korolev <akorolev@infradead.org> Acked-by: NJared Hulbert <jaredeh@gmail.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Alexey Korolev 提交于
Driver which handles device command operation. Details on device operations are available here: http://www.numonyx.com/Documents/Datasheets/DS-315768_Velocity-Discrete.pdfSigned-off-by: NAlexey Korolev <akorolev@infradead.org> Acked-by: NJared Hulbert <jaredeh@gmail.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Alexey Korolev 提交于
LPDDR flash chips are based on completely new kind of chips probing. Device capabilities are available via special request. We sent field request command which contains Major and Minor numbers - and recieve corresponend value. All requests are performed within PFOW window. Detailed information about qinfo records can be found here: http://www.numonyx.com/Documents/Datasheets/DS-315768_Velocity-Discrete.pdfSigned-off-by: NAlexey Korolev <akorolev@infradead.org> Acked-by: NJared Hulbert <jaredeh@gmail.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Matt Reimer 提交于
The various fields in NDTR{01} are in units of clock ticks minus one, but the ns2cycle macro mistakenly adds one, inflating the number of clock ticks and making it impossible to set any of these fields to zero. Signed-off-by: NMatt Reimer <mreimer@vpop.net> Signed-off-by: NEric Miao <eric.miao@marvell.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Matt Reimer 提交于
Reads from non-page-aligned addresses were broken because while the address to read from was correctly written to NDCB*, a full page was always read. Fix this by ignoring the column and only using the page address. I suspect this whole-page behavior is due to the controller's need to read the entire page in order to generate correct ECC. In the non-ECC case this could be optimized to use the column address, and to set the read length to what is being requested rather than the length of an entire page. Signed-off-by: NMatt Reimer <mreimer@vpop.net> Signed-off-by: NEric Miao <eric.miao@marvell.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Randy Dunlap 提交于
Fix sched.h references: build-r7149.out:/local/linsrc/linux-next-20081215/drivers/mtd/nand/nandsim.c:1326: error: dereferencing pointer to incomplete type build-r7149.out:/local/linsrc/linux-next-20081215/drivers/mtd/nand/nandsim.c:1326: error: 'PF_MEMALLOC' undeclared (first use in this function) build-r7149.out:/local/linsrc/linux-next-20081215/drivers/mtd/nand/nandsim.c:1328: error: dereferencing pointer to incomplete type build-r7149.out:/local/linsrc/linux-next-20081215/drivers/mtd/nand/nandsim.c:1335: error: dereferencing pointer to incomplete type build-r7149.out:/local/linsrc/linux-next-20081215/drivers/mtd/nand/nandsim.c:1335: error: 'PF_MEMALLOC' undeclared (first use in this function) build-r7149.out:make[4]: *** [drivers/mtd/nand/nandsim.o] Error 1 Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Julia Lawall 提交于
This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) @inc@ @@ #include <linux/usb.h> @depends on !inc && (r1||r5)@ @@ + #include <linux/usb.h> #include <linux/usb/...> // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
- 28 12月, 2008 1 次提交
-
-
由 Artem Bityutskiy 提交于
Just minor indentation and "over 80 characters" fixes. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 23 12月, 2008 1 次提交
-
-
由 Kay Sievers 提交于
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-