- 22 8月, 2019 5 次提交
-
-
由 Takashi Iwai 提交于
Now that we got the more comprehensive validation code for USB-audio descriptors, the check of overflow in each descriptor unit parser became superfluous. Drop some of the obvious cases. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Instead of the direct kfree() calls, introduce a new local helper to release the usb_mixer_elem_info object. This will be extended to do more than a single kfree() in the later patches. Also, use the standard goto instead of multiple calls in parse_audio_selector_unit() error paths. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Minor code refactoring by combining the UAC version and the type in the switch-case flow, so that we reduce the indentation and redundancy. One good bonus is that the duplicated definition of the same type value (e.g. UAC2_EFFECT_UNIT) can be handled more cleanly. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Introduce a new helper to validate each audio descriptor unit before and check the unit before actually accessing it. This should harden against the OOB access cases with malformed descriptors that have been recently frequently reported by fuzzers. The existing descriptor checks are still kept although they become superfluous after this patch. They'll be cleaned up eventually later. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The bmControls (for UAC1) or bmMixerControls (for UAC2/3) bitmap has a variable size depending on both input and output pins. Its size is to fit with input * output bits. The problem is that the input size can't be determined simply from the unit descriptor itself but it needs to parse the whole connected sources. Although the uac_mixer_unit_get_channels() tries to check some possible overflow of this bitmap, it's incomplete due to the lack of the evaluation of input pins. For covering possible overflows, this patch adds the bitmap overflow check in the loop of input pins in parse_audio_mixer_unit(). Fixes: 0bfe5e43 ("ALSA: usb-audio: Check mixer unit descriptors more strictly") Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 8月, 2019 1 次提交
-
-
由 Hui Peng 提交于
`check_input_term` recursively calls itself with input from device side (e.g., uac_input_terminal_descriptor.bCSourceID) as argument (id). In `check_input_term`, if `check_input_term` is called with the same `id` argument as the caller, it triggers endless recursive call, resulting kernel space stack overflow. This patch fixes the bug by adding a bitmap to `struct mixer_build` to keep track of the checked ids and stop the execution if some id has been checked (similar to how parse_audio_unit handles unitid argument). Reported-by: NHui Peng <benquike@gmail.com> Reported-by: NMathias Payer <mathias.payer@nebelwelt.net> Signed-off-by: NHui Peng <benquike@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 8月, 2019 1 次提交
-
-
由 Hui Peng 提交于
The `uac_mixer_unit_descriptor` shown as below is read from the device side. In `parse_audio_mixer_unit`, `baSourceID` field is accessed from index 0 to `bNrInPins` - 1, the current implementation assumes that descriptor is always valid (the length of descriptor is no shorter than 5 + `bNrInPins`). If a descriptor read from the device side is invalid, it may trigger out-of-bound memory access. ``` struct uac_mixer_unit_descriptor { __u8 bLength; __u8 bDescriptorType; __u8 bDescriptorSubtype; __u8 bUnitID; __u8 bNrInPins; __u8 baSourceID[]; } ``` This patch fixes the bug by add a sanity check on the length of the descriptor. Reported-by: NHui Peng <benquike@gmail.com> Reported-by: NMathias Payer <mathias.payer@nebelwelt.net> Cc: <stable@vger.kernel.org> Signed-off-by: NHui Peng <benquike@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 7月, 2019 1 次提交
-
-
由 Geoffrey D. Bennett 提交于
Add mixer quirk for the Focusrite Scarlett 6i6, 18i8, and 18i20 Gen 2 audio interfaces. Although the interfaces are USB compliant, additional input/output level controls and hardware routing/mixing functionality are available using proprietary USB requests. Signed-off-by: NGeoffrey D. Bennett <g@b4.vu> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 05 7月, 2019 1 次提交
-
-
由 Takashi Iwai 提交于
Extension Unit (XU) is used to have a compatible layout with Processing Unit (PU) on UAC1, and the usb-audio driver code assumed it for parsing the descriptors. Meanwhile, on UAC2, XU became slightly incompatible with PU; namely, XU has a one-byte bmControls bitmap while PU has two bytes bmControls bitmap. This incompatibility results in the read of a wrong address for the last iExtension field, which ended up with an incorrect string for the mixer element name, as recently reported for Focusrite Scarlett 18i20 device. This patch corrects this misalignment by introducing a couple of new macros and calling them depending on the descriptor type. Fixes: 23caaf19 ("ALSA: usb-mixer: Add support for Audio Class v2.0") Reported-by: NStefan Sauer <ensonic@hora-obscura.de> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 31 5月, 2019 1 次提交
-
-
由 Thomas Gleixner 提交于
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NAllison Randal <allison@lohutok.net> Reviewed-by: NRichard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 28 4月, 2019 1 次提交
-
-
由 Wenwen Wang 提交于
In parse_audio_selector_unit(), the string array 'namelist' is allocated through kmalloc_array(), and each string pointer in this array, i.e., 'namelist[]', is allocated through kmalloc() in the following for loop. Then, a control instance 'kctl' is created by invoking snd_ctl_new1(). If an error occurs during the creation process, the string array 'namelist', including all string pointers in the array 'namelist[]', should be freed, before the error code ENOMEM is returned. However, the current code does not free 'namelist[]', resulting in memory leaks. To fix the above issue, free all string pointers 'namelist[]' in a loop. Signed-off-by: NWenwen Wang <wang6495@umn.edu> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 4月, 2019 1 次提交
-
-
由 Takashi Iwai 提交于
The error from snd_usb_mixer_apply_create_quirk() is ignored in the current usb-audio driver code, which will continue the probing even after the error. Let's take it more serious. Fixes: 7b1eda22 ("ALSA: usb-mixer: factor out quirks") Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 2月, 2019 1 次提交
-
-
由 Takashi Iwai 提交于
Simplify the proc fs creation code with new helper functions, snd_card_ro_proc_new() and snd_card_rw_proc_new(). Just a code refactoring and no functional changes. Reviewed-by: NJaroslav Kysela <perex@perex.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 1月, 2019 1 次提交
-
-
由 YueHaibing 提交于
Fixes gcc '-Wunused-but-set-variable' warning: sound/usb/mixer.c: In function 'parse_audio_feature_unit': sound/usb/mixer.c:1838:28: warning: variable 'first_ch_bits' set but not used [-Wunused-but-set-variable] It never used since 2.6 Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 1月, 2019 3 次提交
-
-
由 Takashi Iwai 提交于
There are a few places where we access the data without checking the actual object size from the USB audio descriptor. This may result in OOB access, as recently reported. This patch addresses these missing checks. Most of added codes are simple bLength checks in the caller side. For the input and output terminal parsers, we put the length check in the parser functions. For the input terminal, a new argument is added to distinguish between UAC1 and the rest, as they treat different objects. Reported-by: NMathias Payer <mathias.payer@nebelwelt.net> Reported-by:
Hui Peng <benquike@163.com> Tested-by:
Hui Peng <benquike@163.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
We've had some sanity checks of the mixer unit descriptors but they are too loose and some corner cases are overlooked. Add more strict checks in uac_mixer_unit_get_channels() for avoiding possible OOB accesses by malformed descriptors. This also changes the semantics of uac_mixer_unit_get_channels() slightly. Now it returns zero for the cases where the descriptor lacks of bmControls instead of -EINVAL. Then the caller side skips the mixer creation for such unit while it keeps parsing it. This corresponds to the case like Maya44. Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The parser for the processing unit reads bNrInPins field before the bLength sanity check, which may lead to an out-of-bound access when a malformed descriptor is given. Fix it by assignment after the bLength check. Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 8月, 2018 1 次提交
-
-
由 Gustavo A. R. Silva 提交于
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1357413 ("Missing break in switch") Addresses-Coverity-ID: 114917 ("Missing break in switch") Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 7月, 2018 5 次提交
-
-
由 Jorge Sanjuan 提交于
This patch refactors the processing units min/max calculation logic for the mixer controls and fixes an issue where the Mode Select checking of the Up/Down mixers doesn't differentiate between the UAC1 and UAC2 Control Selector (0x02) and the UAC3 one which is different (0x01). Signed-off-by: NJorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jorge Sanjuan 提交于
The Audio Control interface descriptor subtypes do not match across all the UAC versions. That makes reusability of the "virtual type" (Mixer, Processors, Selectors, etc) terminals difficult. It also makes the mixer get the default names for the virtual terminals wrong due to the overlap. This patch proposes an unified approach by always using the most comprehensive spec version to define them all (in this case UAC3). Signed-off-by: NJorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jorge Sanjuan 提交于
This patch adds support for the Processig Units defined in the UAC3 spec. The main difference with the previous specs is the lack of on/off switches in the controls for these units and the addiction of the new Multi Function Processing Unit. The current version of the UAC3 spec doesn't define any useful controls for the new Multi Function Processing Unit so no control will get created once this unit is parsed. Signed-off-by: NJorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jorge Sanjuan 提交于
Current support for UAC2 Processing Units does the parsing as one control per bit in the bitmap. However, the UAC2 spec defines the controls as bit pairs where b01 means read-only and b11 means read/write control. This patch fixes that and uses the helper functions for checking controls readability/writability when the control is defined as bit pairs (UAC2 and UAC3). Signed-off-by: NJorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jorge Sanjuan 提交于
This patch add support for Selector Units and Clock Selector Units defined in the new UAC3 spec. Selector Units play a really important role in the new UAC3 spec as Processing Units do not define an on/off switch control anymore. This forces topology designers to add bypass paths in the topology to enable/dissable the Processing Units. Signed-off-by: NJorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 6月, 2018 3 次提交
-
-
由 Jorge Sanjuan 提交于
An UAC3 BADD device may also include an interrupt status pipe to report changes on the HEADSET ADAPTER terminals. The creation of the status pipe is dependent on the device reporting that it has it. Signed-off-by: NJorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jorge Sanjuan 提交于
The HEADSET ADAPTER profile for BADD devices is meant to support Insertion Control for the Input and Output Terminals of the headset. This patch defines the BADD inferred input and output terminals and builds the connector controls. Signed-off-by: NJorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jorge Sanjuan 提交于
Change build_connector_control() and get_connector_control_name() so they take `struct usb_mixer_interface` as input argument instead of `struct mixer_build`. This is preliminary work to add support for connectors control for UAC3 BADD devices. No functional change. Signed-off-by: NJorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 6月, 2018 1 次提交
-
-
由 Kees Cook 提交于
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: NKees Cook <keescook@chromium.org>
-
- 28 5月, 2018 1 次提交
-
-
由 Takashi Iwai 提交于
Avoid if ((err = ...) style and expand to multiple lines instead. No change in the end result, but just the beautification. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 5月, 2018 3 次提交
-
-
由 Jorge Sanjuan 提交于
Obtain the number of channels for the Input Terminal from the Logical Cluster Descriptor. This achieves a useful minimal parsing of this unit so it can be used in other units in the topology. Signed-off-by: NJorge Sanjuan <jorge.sanjuan@codethink.co.uk> Reviewed-by: NRuslan Bilovol <ruslan.bilovol@gmail.com> Tested-by: NRuslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jorge Sanjuan 提交于
This adds support for the UAC3 insertion controls. The status is reported as a boolean value in the same way it used to do for UAC2. Hence, the presence of any connector in the response will make the control saying the jack is connected. The UAC2 support for this control has been moved to a dedicated control for connectors as both UAC2 and UAC3 follow a specific Control Request Parameter Block for this control. This parameter block for UAC3 could not be read in the same simplistic manner as in UAC2. This implementation is not requesting additional information from the HIGH CAPABILITY Connectors descriptor. Tested with an UAC3 device with UAC2 as legacy configuration. The connector status can be read with `amixer` and the interrupt is also caught with `alsactl monitor`. Signed-off-by: NJorge Sanjuan <jorge.sanjuan@codethink.co.uk> Reviewed-by: NRuslan Bilovol <ruslan.bilovol@gmail.com> Tested-by: NRuslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jorge Sanjuan 提交于
This adds support for the MIXER UNIT in UAC3. All the information is obtained from the (HIGH CAPABILITY) Cluster's header. We don't read the rest of the logical cluster to obtain the channel config as that wont make any difference in the current mixer behaviour. The name of the mixer unit is not yet requested as there is not support for the UAC3 Class Specific String requests. Tested in an UAC3 device working as a HEADSET with a basic mixer unit (same as the one in the BADD spec) with no controls. Signed-off-by: NJorge Sanjuan <jorge.sanjuan@codethink.co.uk> Reviewed-by: NRuslan Bilovol <ruslan.bilovol@gmail.com> Tested-by: NRuslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 5月, 2018 1 次提交
-
-
由 Federico Cuello 提交于
Currently it's not possible to set volume lower than 26% (it just mutes). Also fixes this warning: Warning! Unlikely big volume range (=9472), cval->res is probably wrong. [13] FU [PCM Playback Volume] ch = 2, val = -9473/-1/1 , and volume works fine for full range. Signed-off-by: NFederico Cuello <fedux@fedux.com.ar> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 5月, 2018 1 次提交
-
-
由 Ruslan Bilovol 提交于
Recently released USB Audio Class 3.0 specification contains BADD (Basic Audio Device Definition) document which describes pre-defined UAC3 configurations. BADD support is mandatory for UAC3 devices, it should be implemented as a separate USB device configuration. As per BADD document, class-specific descriptors shall not be included in the Device’s Configuration descriptor ("inferred"), but host can guess them from BADD profile number, number of endpoints and their max packed sizes. This patch adds support of all BADD profiles from the spec Signed-off-by: NRuslan Bilovol <ruslan.bilovol@gmail.com> Tested-by: NJorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 5月, 2018 1 次提交
-
-
由 Ruslan Bilovol 提交于
Functions like snd_usb_copy_string_desc() or get_term_name() don't actually need mixer_build state but can use snd_usb_audio structure instead to get usb device. This patch has no functional change but prepares to future UAC3 BADD profiles support which don't have class-specific descriptors so won't have mixer_build state. Signed-off-by: NRuslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 5月, 2018 1 次提交
-
-
由 Takashi Iwai 提交于
Introduce a new macro for iterating over mixer element list for avoiding the open codes in many places. Also the open-coded container_of() and the forced cast to struct usb_mixer_elem_info are replaced with another simple macro, too. No functional changes but just readability improvement. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 02 5月, 2018 2 次提交
-
-
由 Takashi Iwai 提交于
This patch adds "Keep Interface" control for each USB-audio device. The control element is with SND_CTL_IFACE_CARD, so that it won't appear on any sane mixer applications. For a device that is confirmed to work well with "keep-interface" mode, user can flip the control via amixer, e.g. % amixer -c1 cset iface=CARD,name='Keep Interface' on and save/restore the state via alsactl. The reason to provide this via control API is that the behavior must be pretty depending on the device (and the firmware in it), so it's not ideal to apply via module option. For a device that certainly works, we may set it statically via a quirk table entry. But a device like Dell WD15 dock behaves so differently depending on the firmware, and we can't set it statically. So leave this as a dynamic switch each user can adjust freely. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
In the early commit adcdd0d5 ("ALSA: usb-audio: Skip volume controls triggers hangup on Dell USB Dock"), we add the mixer quirks for Dell dock to skip two mixer FU's for playback. This supposed that the device has always the proper initial volume, but it doesn't seem always correct. This patch adds the explicit initialization of the volumes to the fixed 0dB at the device probe time. Also, such a fixup is needed after the resume, so a new function is hooked to the resume callback as well. Bugzilla: http://bugzilla.suse.com/show_bug.cgi?id=1089467Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 4月, 2018 1 次提交
-
-
由 Takashi Iwai 提交于
The UAC2 jack detection support introduced the bmControls checks in a couple of places, but they forgot the endian conversion; the bmControls of UAC2 terminal descriptor is __le16, not a byte like in UAC1. Fixes: 5a222e84 ("ALSA: usb-audio: UAC2 jack detection") Tested-by: NAndrew Chant <achant@google.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 4月, 2018 1 次提交
-
-
由 Takashi Iwai 提交于
The recent code refactoring made the argument for some helper functions to be the explicit UAC_CS_* and UAC2_CS_* value instead of 0-based offset. However, there was one place left forgotten, and it caused a regression on some devices appearing as the inconsistent mixer setup. This patch corrects the forgotten conversion. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199449 Fixes: 21e9b3e9 ("ALSA: usb-audio: fix uac control query argument") Tested-by: NNazar Mokrynskyi <nazar@mokrynskyi.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 27 3月, 2018 1 次提交
-
-
由 Colin Ian King 提交于
With the current exit return path of the ctl_info allocation failure cval is not being freed resulting in a memory leak. Fix this by kfree'ing it on the return. Detected by CoverityScan, CID#1466878 ("Resource Leak") Fixes: 21e9b3e9 ("ALSA: usb-audio: fix uac control query argument") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-