Add the zero hop addressing support by using mtr interface for CQE buffer,
so the hns driver can support addressing hopnum between 0 to 3 for CQE.

Link: https://lore.kernel.org/r/1586779091-51410-7-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add the zero hop addressing support by using mtr interface for SRQ buffer,
so the hns driver can support addressing hopnum between 0 to 3 for SRQ.

Link: https://lore.kernel.org/r/1586779091-51410-6-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add the zero hop addressing support by using new mtr interface for WQE
buffer and simple mtr invoking process, so WQE buffer can support hopnum
between 0 to 3.

Link: https://lore.kernel.org/r/1586779091-51410-5-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Use the new mtr interface to simple the hop 0 addressing and multihop
addressing process.

Link: https://lore.kernel.org/r/1586779091-51410-4-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When the value of nbufs is 1, the buffer is in direct mode, which may cause
confusion. So optimizes current codes to make it easier to maintain and
understand.

Link: https://lore.kernel.org/r/1586779091-51410-3-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Currently, WQE and EQE table have already used the mtr interface to config
and access memory by multi-hop addressing when hopnum is from 1 to 3. But
if hopnum is 0, each table need write its own but repetitive logic, and
many duplicate code exists in the mtr interfaces invoke process.

So wraps the public logic as 3 functions: hns_roce_mtr_create(),
hns_roce_mtr_destroy() and hns_roce_mtr_map() to support hopnum ranges from
0 to 3. In addition, makes the mtr interfaces easier to use.

Link: https://lore.kernel.org/r/1586779091-51410-2-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Currently, before the qp is created, a page size needs to be calculated
for the base address table to store all base addresses in the mtr. As a
result, the parameter configuration of the mtr is complex. So integrate
the process of calculating the base table page size into the hem related
interface to simplify the process of using mtr.

Link: https://lore.kernel.org/r/1583839084-31579-5-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There are serval global functions related to wqe buffer in the hns driver
and are called in different files. These symbols cannot directly represent
the namespace they belong to. So add prefix 'hns_roce_' to 3 wqe buffer
related global functions: get_recv_wqe(), get_send_wqe(), and
get_send_extend_sge().

Link: https://lore.kernel.org/r/1583839084-31579-2-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Encapsulate qp buffer allocation related code into 3 functions:
alloc_qp_buf(), map_wqe_buf() and free_qp_buf().

Link: https://lore.kernel.org/r/1582526258-13825-5-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Wrap the duplicate code in hip08 and hip06 qp destruction process as
hns_roce_qp_destroy() to simply the qp destroy flow.

Link: https://lore.kernel.org/r/1582526258-13825-2-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

HiP08 RoCE hardware lacks ability(a known hardware problem) to flush
outstanding WQEs if QP state gets into errored mode for some reason.  To
overcome this hardware problem and as a workaround, when QP is detected to
be in errored state during various legs like post send, post receive
etc[1], flush needs to be performed from the driver.

The earlier patch[1] sent to solve the hardware limitation explained in
the cover-letter had a bug in the software flushing leg. It acquired mutex
while modifying QP state to errored state and while conveying it to the
hardware using the mailbox. This caused leg to sleep while holding
spin-lock and caused crash.

Suggested Solution: we have proposed to defer the flushing of the QP in
the Errored state using the workqueue to get around with the limitation of
our hardware.

This patch specifically adds the calls to the flush handler from where
parts of the code like post_send/post_recv etc. when the QP state gets
into the errored mode.

[1] https://patchwork.kernel.org/patch/10534271/

Link: https://lore.kernel.org/r/1580983005-13899-3-git-send-email-liuyixian@huawei.comSigned-off-by: NYixian Liu <liuyixian@huawei.com>
Reviewed-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

HiP08 RoCE hardware lacks ability(a known hardware problem) to flush
outstanding WQEs if QP state gets into errored mode for some reason.  To
overcome this hardware problem and as a workaround, when QP is detected to
be in errored state during various legs like post send, post receive etc
[1], flush needs to be performed from the driver.

The earlier patch[1] sent to solve the hardware limitation explained in
the cover-letter had a bug in the software flushing leg. It acquired mutex
while modifying QP state to errored state and while conveying it to the
hardware using the mailbox. This caused leg to sleep while holding
spin-lock and caused crash.

Suggested Solution:
we have proposed to defer the flushing of the QP in the Errored state
using the workqueue to get around with the limitation of our hardware.

This patch adds the framework of the workqueue and the flush handler
function.

[1] https://patchwork.kernel.org/patch/10534271/

Link: https://lore.kernel.org/r/1580983005-13899-2-git-send-email-liuyixian@huawei.comSigned-off-by: NYixian Liu <liuyixian@huawei.com>
Reviewed-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The eqe has a private multi-hop addressing implementation, but there is
already a set of interfaces in the hns driver that can achieve this.

So, simplify the eqe buffer allocation process by using the mtr interface
and remove large amount of repeated logic.

Link: https://lore.kernel.org/r/20200126145835.11368-1-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Some magic numbers are hard to understand, so replace them with macros or
add some comments for them.

Link: https://lore.kernel.org/r/20200126145504.9700-1-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NYixing Liu <liuyixing1@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

pf capabilities are set by default for hip08 previously which should
depends on different types of hardware. So add new interfaces to get them
from firmware.

Link: https://lore.kernel.org/r/1578738761-3176-3-git-send-email-liweihang@huawei.comSigned-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

In struct hns_roce_caps, max_srq_sg and max_srqwqes is unused, and
max_srqs has the same effect with num_srqs. So remove them from this
structrue.

Link: https://lore.kernel.org/r/1578738761-3176-2-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When hardware is in resetting stage, we may can't poll back all the
expected work completions as the hardware won't generate cqe anymore.

This patch allows the driver to compose the expected wc instead of the
hardware during resetting stage. Once the hardware finished resetting, we
can poll cq from hardware again.

Link: https://lore.kernel.org/r/1578572412-25756-1-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

HNS_ROCE_ALIGN_UP can be replaced by round_up() which is defined in
kernel.h.

Link: https://lore.kernel.org/r/1578313276-29080-7-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The values used to represent service type of RC and UD should be
interchanged according to design of hardware. And it's better to define
these types in enumeration than macros.

Link: https://lore.kernel.org/r/1578313276-29080-4-git-send-email-liweihang@huawei.comSigned-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

hns_roce_init_eq_table() is an unused function that only retains its
declaration in driver.

Link: https://lore.kernel.org/r/1578313276-29080-3-git-send-email-liweihang@huawei.comSigned-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Currently, the wqe idx is calculated repeatly everywhere it is used.  This
patch defines wqe_idx and calculated it only once, then just use it as
needed.

Fixes: 2d407888 ("RDMA/hns: Add support for processing send wr and receive wr")
Link: https://lore.kernel.org/r/1575981902-5274-1-git-send-email-liweihang@hisilicon.comSigned-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Currently, when cq event occurred, we first call our own callback
functions in the event process function, then call ib callback
functions. Actually, we can directly call ib callback functions.

Link: https://lore.kernel.org/r/1574044493-46984-5-git-send-email-liweihang@hisilicon.comSigned-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Current names of functions are not proper, such as hns_roce_free_cq,
actually it means free cqc, thus we rename them. Furthermore, functions
used inside one file can be named without the prefix hns_roce_ which will
make the functions for verbs symbols more eye-catching.

Link: https://lore.kernel.org/r/1574044493-46984-4-git-send-email-liweihang@hisilicon.comSigned-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There is no need to package buf and mtt into hns_roce_cq_buf, which will
make code more complex, just delete this struct and move buf and mtt into
hns_roce_cq. Furthermore, we add size member for hns_roce_buf to avoid
repeatly calculating where needed it.

Link: https://lore.kernel.org/r/1574044493-46984-3-git-send-email-liweihang@hisilicon.comSigned-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Some interfaces defined with unnecessary input parameters, such as "nent"
and "vector". This patch redefined these interfaces to make the code more
readable and simple.

Link: https://lore.kernel.org/r/1574044493-46984-2-git-send-email-liweihang@hisilicon.comSigned-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Replace "sw2hw" and "hw2sw" which is hard to understand with "create" and
"destroy".

Link: https://lore.kernel.org/r/1572952082-6681-6-git-send-email-liweihang@hisilicon.comSigned-off-by: NYixing Liu <liuyixing1@huawei.com>
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Use wqe_cnt instead of max which means the queue size of srq, and remove
wqe_ctr which is not used.

Link: https://lore.kernel.org/r/1572952082-6681-5-git-send-email-liweihang@hisilicon.comSigned-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The uar information is already recorded in priv_uar of hns_roce_dev, there
is no need to record it in hns_roce_cq again.

Link: https://lore.kernel.org/r/1572952082-6681-4-git-send-email-liweihang@hisilicon.comSigned-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Special QP have no differences with normal qp in data structure, so
definition of struct hns_roce_sqp should be removed and replaced by struct
hns_roce_qp.

Link: https://lore.kernel.org/r/1572952082-6681-3-git-send-email-liweihang@hisilicon.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There is no need to define max_post in hns_roce_wq, as it does same thing
as wqe_cnt.

Link: https://lore.kernel.org/r/1572952082-6681-2-git-send-email-liweihang@hisilicon.comSigned-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

HNS redefined available in bits.h define and didn't use it, we can safely
delete it.

Link: https://lore.kernel.org/r/20191023054239.31648-1-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

HNS_ROCE_ALOGN_UP should be HNS_ROCE_ALIGN_UP, this patch fix it.
Signed-off-by: NYixing Liu <liuyixing1@huawei.com>
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1567566885-23088-6-git-send-email-liweihang@hisilicon.comSigned-off-by: NDoug Ledford <dledford@redhat.com>

The name of vlan and vlan_tag is not clear enough, it's actually means
vlan id.
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1567566885-23088-4-git-send-email-liweihang@hisilicon.comSigned-off-by: NDoug Ledford <dledford@redhat.com>

Sparse is whining about the u32 and __le32 mixed usage in the driver.
The roce_set_field() is used to __le32 data of hardware only.
If a variable is not delivered to the hardware, the __le32 type and
related operations are not required.
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Link: https://lore.kernel.org/r/1566393276-42555-6-git-send-email-oulijun@huawei.comSigned-off-by: NDoug Ledford <dledford@redhat.com>

Here uses the meaningful macro instead of the magic number
for readability.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NLang Chen <chenglang@huawei.com>
Link: https://lore.kernel.org/r/1566393276-42555-5-git-send-email-oulijun@huawei.comSigned-off-by: NDoug Ledford <dledford@redhat.com>

we change type of some members to u32/u8 from __le32 as well as
split sl_tclass_flowlabel into three variables in hns_roce_av.
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Link: https://lore.kernel.org/r/1566393276-42555-4-git-send-email-oulijun@huawei.comSigned-off-by: NDoug Ledford <dledford@redhat.com>

For struct hns_roce_cmdq, toggle is unused and
delete it.
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Link: https://lore.kernel.org/r/1565343666-73193-8-git-send-email-oulijun@huawei.comSigned-off-by: NDoug Ledford <dledford@redhat.com>

Here removes some useless comments and adds necessary spaces to
another comments.
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Link: https://lore.kernel.org/r/1565276034-97329-7-git-send-email-oulijun@huawei.comSigned-off-by: NDoug Ledford <dledford@redhat.com>

In order to improve readability, add ib_port_phys_state enum to replace
the use of magic numbers.
Signed-off-by: NKamal Heib <kamalheib1@gmail.com>
Reviewed-by: NAndrew Boyer <aboyer@tobark.org>
Acked-by: NMichal Kalderon <michal.kalderon@marvell.com>
Acked-by: NBernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20190807103138.17219-2-kamalheib1@gmail.comSigned-off-by: NDoug Ledford <dledford@redhat.com>

Moves the related lines of setting extended sge size into a separate
function as well as remove the unused variables.

Link: https://lore.kernel.org/r/1562593285-8037-5-git-send-email-oulijun@huawei.comSigned-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>