Extending the data_lock scope in mptcp_incoming_option
we can use that to protect both snd_una and wnd_end.
In the typical case, we will have a single atomic op instead of 2
Acked-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Send timely MPTCP-level ack is somewhat difficult when
the insertion into the msk receive level is performed
by the worker.

It needs TCP-level dup-ack to notify the MPTCP-level
ack_seq increase, as both the TCP-level ack seq and the
rcv window are unchanged.

We can actually avoid processing incoming data with the
worker, and let the subflow or recevmsg() send ack as needed.

When recvmsg() moves the skbs inside the msk receive queue,
the msk space is still unchanged, so tcp_cleanup_rbuf() could
end-up skipping TCP-level ack generation. Anyway, when
__mptcp_move_skbs() is invoked, a known amount of bytes is
going to be consumed soon: we update rcv wnd computation taking
them in account.

Additionally we need to explicitly trigger tcp_cleanup_rbuf()
when recvmsg() consumes a significant amount of the receive buffer.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

OoO handling attempts to detect when packet is out-of-window by testing
current ack sequence and remaining space vs. sequence number.

This doesn't work reliably. Store the highest allowed sequence number
that we've announced and use it to detect oow packets.

Do this when mptcp options get written to the packet (wire format).
For this to work we need to move the write_options call until after
stack selected a new tcp window.
Acked-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

When ADD_ADDR suboption includes an IPv6 address, the size is 28 octets.
It will not fit when other MPTCP suboptions are included in this packet,
e.g. DSS. So here we send out an ADD_ADDR dedicated packet to carry only
ADD_ADDR suboption, no other MPTCP suboptions.

In mptcp_pm_announce_addr, we check whether this is an IPv6 ADD_ADDR.
If it is, we set the flag MPTCP_ADD_ADDR_IPV6 to true. Then we call
mptcp_pm_nl_add_addr_send_ack to sent out a new pure ACK packet.

In mptcp_established_options_add_addr, we check whether this is a pure
ACK packet for ADD_ADDR. If it is, we drop all other MPTCP suboptions
in this packet, only put ADD_ADDR suboption in it.
Suggested-by: NPaolo Abeni <pabeni@redhat.com>
Acked-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Before sending 'x' new bytes also check that the new snd_una would
be within the permitted receive window.

For every ACK that also contains a DSS ack, check whether its tcp-level
receive window would advance the current mptcp window right edge and
update it if so.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Co-developed-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

We must not close the subflows before all the MPTCP level
data, comprising the DATA_FIN has been acked at the MPTCP
level, otherwise we could be unable to retransmit as needed.

__mptcp_wr_shutdown() shutdown is responsible to check for the
correct status and close all subflows. Is called by the output
path after spooling any data and at shutdown/close time.

In a similar way, __mptcp_destroy_sock() is responsible to clean-up
the MPTCP level status, and is called when the msk transition
to TCP_CLOSE.

The protocol level close() does not force anymore the TCP_CLOSE
status, but orphan the msk socket and all the subflows.
Orphaned msk sockets are forciby closed after a timeout or
when all MPTCP-level data is acked.

There is a caveat about keeping the orphaned subflows around:
the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via
tcp_close(). To prevent accessing freed memory on later MPTCP
level operations, the msk acquires a reference to each subflow
socket and prevent subflow_ulp_release() from releasing the
subflow context before __mptcp_destroy_sock().

The additional subflow references are released by __mptcp_done()
and the async ULP release is detected checking ULP ops. If such
field has been already cleared by the ULP release path, the
dangling context is freed directly by __mptcp_done().
Co-developed-by: NDavide Caratti <dcaratti@redhat.com>
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Track the next MPTCP sequence number used on xmit,
currently always equal to write_next.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Move mptcp_options_received's port initialization from
mptcp_parse_option to mptcp_get_options, put it together with
the other fields initializations of mptcp_options_received.
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Reviewed-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Initialize mptcp_options_received's ahmac to zero, otherwise it
will be a random number when receiving ADD_ADDR suboption with echo-flag=1.

Fixes: 3df523ab ("mptcp: Add ADD_ADDR handling")
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Reviewed-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Additional/MP_JOIN subflows that do not pass some initial handshake
tests currently causes fallback to TCP. That is an RFC violation:
we should instead reset the subflow and leave the the msk untouched.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/91
Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests")
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

using packetdrill it's possible to observe the same MPTCP DSN being acked
by different subflows with DACK4 and DACK8. This is in contrast with what
specified in RFC8684 §3.3.2: if an MPTCP endpoint transmits a 64-bit wide
DSN, it MUST be acknowledged with a 64-bit wide DACK. Fix 'use_64bit_ack'
variable to make it a property of MPTCP sockets, not TCP subflows.

Fixes: a0c1d0ea ("mptcp: Use 32-bit DATA_ACK when possible")
Acked-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Currently data fin on data packet are not handled properly:
the 'rcv_data_fin_seq' field is interpreted as the last
sequence number carrying a valid data, but for data fin
packet with valid maps we currently store map_seq + map_len,
that is, the next value.

The 'write_seq' fields carries instead the value subseguent
to the last valid byte, so in mptcp_write_data_fin() we
never detect correctly the last DSS map.

Fixes: 7279da61 ("mptcp: Use MPTCP-level flag for sending DATA_FIN")
Fixes: 1a49b2c2 ("mptcp: Handle incoming 32-bit DATA_FIN values")
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The MPTCP ADD_ADDR suboption with echo-flag=1 has no HMAC, the size is
smaller than the one initially sent without echo-flag=1. We then need to
use the correct size everywhere when we need this echo bit.

Before this patch, the wrong size was reserved but the correct amount of
bytes were written (and read): the remaining bytes contained garbage.

Fixes: 6a6c05a8 ("mptcp: send out ADD_ADDR with echo flag")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/95Reported-and-tested-by: NDavide Caratti <dcaratti@redhat.com>
Acked-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The peer may send a DATA_FIN mapping with either a 32-bit or 64-bit
sequence number. When a 32-bit sequence number is received for the
DATA_FIN, it must be expanded to 64 bits before comparing it to the
last acked sequence number. This expansion was missing.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/93
Fixes: 3721b9b6 ("mptcp: Track received DATA_FIN sequence number and add related helpers")
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The msk->ack_seq value is sometimes read without the msk lock held, so
make proper use of READ_ONCE and WRITE_ONCE.
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since commit cfde141e ("mptcp: move option parsing into
mptcp_incoming_options()"), the 3rd function argument is no longer used.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch implemented the retransmition of ADD_ADDR when no ADD_ADDR echo
is received. It added a timer with the announced address. When timeout
occurs, ADD_ADDR will be retransmitted.
Suggested-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Suggested-by: NPaolo Abeni <pabeni@redhat.com>
Acked-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch added two mibs for ADD_ADDR, MPTCP_MIB_ADDADDR for receiving
of the ADD_ADDR suboption with echo-flag=0, and MPTCP_MIB_ECHOADD for
receiving the ADD_ADDR suboption with echo-flag=1.
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Co-developed-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the ADD_ADDR suboption has been received, we need to send out the same
ADD_ADDR suboption with echo-flag=1, and no HMAC.
Suggested-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch added the RM_ADDR option parsing logic:

We parsed the incoming options to find if the rm_addr option is received,
and called mptcp_pm_rm_addr_received to schedule PM work to a new status,
named MPTCP_PM_RM_ADDR_RECEIVED.

PM work got this status, and called mptcp_pm_nl_rm_addr_received to handle
it.

In mptcp_pm_nl_rm_addr_received, we closed the subflow matching the rm_id,
and updated PM counter.
Suggested-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: NPaolo Abeni <pabeni@redhat.com>
Suggested-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch added a new signal named rm_addr_signal in PM. On outgoing path,
we called mptcp_pm_should_rm_signal to check if rm_addr_signal has been
set. If it has been, we sent out the RM_ADDR option.
Suggested-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch renamed addr_signal and the related functions with the explicit
word "add".
Suggested-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Bare TCP ack skbs are freed right after MPTCP sees them, so the work to
allocate, zero, and populate the MPTCP skb extension is wasted. Detect
these skbs and do not add skb extensions to them.
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RFC 8684 appendix D describes the connection state machine for
MPTCP. This patch implements the DATA_FIN / DATA_ACK exchanges and
MPTCP-level socket state changes described in that appendix, rather than
simply sending DATA_FIN along with TCP FIN when disconnecting subflows.

DATA_FIN is now sent and acknowledged before shutting down the
subflows. Received DATA_FIN information (if not part of a data packet)
is written to the MPTCP socket when the incoming DSS option is parsed by
the subflow, and the MPTCP worker is scheduled to process the
flag. DATA_FIN received as part of a full DSS mapping will be handled
when the mapping is processed.

The DATA_FIN is acknowledged by the worker if the reader is caught
up. If there is still data to be moved to the MPTCP-level queue, ack_seq
will be incremented to account for the DATA_FIN when it reaches the end
of the stream and a DATA_ACK will be sent to the peer.
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Incoming DATA_FIN headers need to propagate the presence of the DATA_FIN
bit and the associated sequence number to the MPTCP layer, even when
arriving on a bare ACK that does not get added to the receive queue. Add
structure members to store the DATA_FIN information and helpers to set
and check those values.
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since DATA_FIN information is the same for every subflow, store it only
in the mptcp_sock.
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RFC 8684-compliant DATA_FIN needs to be sent and ack'd before subflows
are closed with TCP FIN, so write DATA_FIN DSS headers whenever their
transmission has been enabled by the MPTCP connection-level socket.
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently accepted msk sockets become established only after
accept() returns the new sk to user-space.

As MP_JOIN request are refused as per RFC spec on non fully
established socket, the above causes mp_join self-tests
instabilities.

This change lets the msk entering the established status
as soon as it receives the 3rd ack and propagates the first
subflow fully established status on the msk socket.

Finally we can change the subflow acceptance condition to
take in account both the sock state and the msk fully
established flag.
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: NChristoph Paasch <cpaasch@apple.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The RFC 8684 mandates that no-data DATA FIN packets should carry
a DSS with 0 sequence number and data len equal to 1. Currently,
on FIN retransmission we re-use the existing mapping; if the previous
fin transmission was part of a partially acked data packet, we could
end-up writing in the egress packet a non-compliant DSS.

The above will be detected by a "Bad mapping" warning on the receiver
side.

This change addresses the issue explicitly checking for 0 len packet
when adding the DATA_FIN option.

Fixes: 6d0060f6 ("mptcp: Write MPTCP DSS headers to outgoing data packets")
Reported-by: syzbot+42a07faa5923cfaeb9c9@syzkaller.appspotmail.com
Tested-by: NChristoph Paasch <cpaasch@apple.com>
Reviewed-by: NChristoph Paasch <cpaasch@apple.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Keep using MPTCP sockets and a use "dummy mapping" in case of fallback
to regular TCP. When fallback is triggered, skip addition of the MPTCP
option on send.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/11
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/22Co-developed-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In RFC 8684, we don't need to send sndr_key in SYN package anymore, so drop
it.

Fixes: cc7972ea ("mptcp: parse and emit MP_CAPABLE option according to v1 spec")
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Reviewed-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In MPTCPOPT_RM_ADDR option parsing, the pointer "ptr" pointed to the
"Subtype" octet, the pointer "ptr+1" pointed to the "Address ID" octet:

  +-------+-------+---------------+
  |Subtype|(resvd)|   Address ID  |
  +-------+-------+---------------+
  |               |
 ptr            ptr+1

We should set mp_opt->rm_id to the value of "ptr+1", not "ptr". This patch
will fix this bug.

Fixes: 3df523ab ("mptcp: Add ADD_ADDR handling")
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Reviewed-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is some ambiguity in the RFC as to whether the ADD_ADDR HMAC is
the rightmost 64 bits of the entire hash or of the leftmost 160 bits
of the hash.  The intention, as clarified with the author of the RFC,
is the entire hash.

This change returns the entire hash from
mptcp_crypto_hmac_sha (instead of only the first 160 bits), and moves
any truncation/selection operation on the hash to the caller.

Fixes: 12555a2d ("mptcp: use rightmost 64 bits in ADD_ADDR HMAC")
Reviewed-by: NChristoph Paasch <cpaasch@apple.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NTodd Malsbary <todd.malsbary@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This changes the HMAC used in the ADD_ADDR option from the leftmost 64
bits to the rightmost 64 bits as described in RFC 8684, section 3.4.1.

This issue was discovered while adding support to packetdrill for the
ADD_ADDR v1 option.

Fixes: 3df523ab ("mptcp: Add ADD_ADDR handling")
Signed-off-by: NTodd Malsbary <todd.malsbary@linux.intel.com>
Acked-by: NChristoph Paasch <cpaasch@apple.com>
Reviewed-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RFC8684 allows to send 32-bit DATA_ACKs as long as the peer is not
sending 64-bit data-sequence numbers. The 64-bit DSN is only there for
extreme scenarios when a very high throughput subflow is combined with a
long-RTT subflow such that the high-throughput subflow wraps around the
32-bit sequence number space within an RTT of the high-RTT subflow.

It is thus a rare scenario and we should try to use the 32-bit DATA_ACK
instead as long as possible. It allows to reduce the TCP-option overhead
by 4 bytes, thus makes space for an additional SACK-block. It also makes
tcpdumps much easier to read when the DSN and DATA_ACK are both either
32 or 64-bit.
Signed-off-by: NChristoph Paasch <cpaasch@apple.com>
Reviewed-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When parsing MPC+data packets we set the dss field, so
we must also initialize the data_fin, or we can find stray
value there.

Fixes: 9a19371b ("mptcp: fix data_fin handing in RX path")
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mentioned RX option field is initialized only for DSS
packet, we must access it only if 'dss' is set too, or
the subflow will end-up in a bad status, leading to
RFC violations.

Fixes: d22f4988 ("mptcp: process MP_CAPABLE data option")
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Syzcaller has found a way to trigger the WARN_ON_ONCE condition
in check_fully_established().

The root cause is a legit fallback to TCP scenario, so replace
the WARN with a plain message on a more strict condition.

Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mptcp_options_received structure carries several per
packet flags (mp_capable, mp_join, etc.). Such fields must
be cleared on each packet, even on dropped ones or packet
not carrying any MPTCP options, but the current mptcp
code clears them only on TCP option reset.

On several races/corner cases we end-up with stray bits in
incoming options, leading to WARN_ON splats. e.g.:

[  171.164906] Bad mapping: ssn=32714 map_seq=1 map_data_len=32713
[  171.165006] WARNING: CPU: 1 PID: 5026 at net/mptcp/subflow.c:533 warn_bad_map (linux-mptcp/net/mptcp/subflow.c:533 linux-mptcp/net/mptcp/subflow.c:531)
[  171.167632] Modules linked in: ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel geneve ip6_udp_tunnel udp_tunnel macsec macvtap tap ipvlan macvlan 8021q garp mrp xfrm_interface veth netdevsim nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun binfmt_misc intel_rapl_msr intel_rapl_common rfkill kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel joydev virtio_balloon pcspkr i2c_piix4 sunrpc ip_tables xfs libcrc32c crc32c_intel serio_raw virtio_console ata_generic virtio_blk virtio_net net_failover failover ata_piix libata
[  171.199464] CPU: 1 PID: 5026 Comm: repro Not tainted 5.7.0-rc1.mptcp_f227fdf5d388+ #95
[  171.200886] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
[  171.202546] RIP: 0010:warn_bad_map (linux-mptcp/net/mptcp/subflow.c:533 linux-mptcp/net/mptcp/subflow.c:531)
[  171.206537] Code: c1 ea 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 1d 8b 55 3c 44 89 e6 48 c7 c7 20 51 13 95 e8 37 8b 22 fe <0f> 0b 48 83 c4 08 5b 5d 41 5c c3 89 4c 24 04 e8 db d6 94 fe 8b 4c
[  171.220473] RSP: 0018:ffffc90000150560 EFLAGS: 00010282
[  171.221639] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[  171.223108] RDX: 0000000000000000 RSI: 0000000000000008 RDI: fffff5200002a09e
[  171.224388] RBP: ffff8880aa6e3c00 R08: 0000000000000001 R09: fffffbfff2ec9955
[  171.225706] R10: ffffffff9764caa7 R11: fffffbfff2ec9954 R12: 0000000000007fca
[  171.227211] R13: ffff8881066f4a7f R14: ffff8880aa6e3c00 R15: 0000000000000020
[  171.228460] FS:  00007f8623719740(0000) GS:ffff88810be00000(0000) knlGS:0000000000000000
[  171.230065] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  171.231303] CR2: 00007ffdab190a50 CR3: 00000001038ea006 CR4: 0000000000160ee0
[  171.232586] Call Trace:
[  171.233109]  <IRQ>
[  171.233531] get_mapping_status (linux-mptcp/net/mptcp/subflow.c:691)
[  171.234371] mptcp_subflow_data_available (linux-mptcp/net/mptcp/subflow.c:736 linux-mptcp/net/mptcp/subflow.c:832)
[  171.238181] subflow_state_change (linux-mptcp/net/mptcp/subflow.c:1085 (discriminator 1))
[  171.239066] tcp_fin (linux-mptcp/net/ipv4/tcp_input.c:4217)
[  171.240123] tcp_data_queue (linux-mptcp/./include/linux/compiler.h:199 linux-mptcp/net/ipv4/tcp_input.c:4822)
[  171.245083] tcp_rcv_established (linux-mptcp/./include/linux/skbuff.h:1785 linux-mptcp/./include/net/tcp.h:1774 linux-mptcp/./include/net/tcp.h:1847 linux-mptcp/net/ipv4/tcp_input.c:5238 linux-mptcp/net/ipv4/tcp_input.c:5730)
[  171.254089] tcp_v4_rcv (linux-mptcp/./include/linux/spinlock.h:393 linux-mptcp/net/ipv4/tcp_ipv4.c:2009)
[  171.258969] ip_protocol_deliver_rcu (linux-mptcp/net/ipv4/ip_input.c:204 (discriminator 1))
[  171.260214] ip_local_deliver_finish (linux-mptcp/./include/linux/rcupdate.h:651 linux-mptcp/net/ipv4/ip_input.c:232)
[  171.261389] ip_local_deliver (linux-mptcp/./include/linux/netfilter.h:307 linux-mptcp/./include/linux/netfilter.h:301 linux-mptcp/net/ipv4/ip_input.c:252)
[  171.265884] ip_rcv (linux-mptcp/./include/linux/netfilter.h:307 linux-mptcp/./include/linux/netfilter.h:301 linux-mptcp/net/ipv4/ip_input.c:539)
[  171.273666] process_backlog (linux-mptcp/./include/linux/rcupdate.h:651 linux-mptcp/net/core/dev.c:6135)
[  171.275328] net_rx_action (linux-mptcp/net/core/dev.c:6572 linux-mptcp/net/core/dev.c:6640)
[  171.280472] __do_softirq (linux-mptcp/./arch/x86/include/asm/jump_label.h:25 linux-mptcp/./include/linux/jump_label.h:200 linux-mptcp/./include/trace/events/irq.h:142 linux-mptcp/kernel/softirq.c:293)
[  171.281379] do_softirq_own_stack (linux-mptcp/arch/x86/entry/entry_64.S:1083)
[  171.282358]  </IRQ>

We could address the issue clearing explicitly the relevant fields
in several places - tcp_parse_option, tcp_fast_parse_options,
possibly others.

Instead we move the MPTCP option parsing into the already existing
mptcp ingress hook, so that we need to clear the fields in a single
place.

This allows us dropping an MPTCP hook from the TCP code and
removing the quite large mptcp_options_received from the tcp_sock
struct. On the flip side, the MPTCP sockets will traverse the
option space twice (in tcp_parse_option() and in
mptcp_incoming_options(). That looks acceptable: we already
do that for syn and 3rd ack packets, plain TCP socket will
benefit from it, and even MPTCP sockets will experience better
code locality, reducing the jumps between TCP and MPTCP code.

v1 -> v2:
 - rebased on current '-net' tree

Fixes: 648ef4b8 ("mptcp: Implement MPTCP receive path")
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the MPTCP code uses 2 hooks to process syn-ack
packets, mptcp_rcv_synsent() and the sk_rx_dst_set()
callback.

We can drop the first, moving the relevant code into the
latter, reducing the hooking into the TCP code. This is
also needed by the next patch.

v1 -> v2:
 - use local tcp sock ptr instead of casting the sk variable
   several times - DaveM
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>