Fix identation of switch/case statements so they follow style used by the
rest of the kernel.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

There is no reason for allocating struct wacom_wac separately from
struct wacom since both have the same lifetime rules and are not
shared. Also make 'open' field a boolean.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Touch enbaled devices share the same product ID with pen. However,
we do not want to post touch events while pen is in prox. To do so,
we used to keep a local static variable to keep track of if pen is
in prox or not. This works fine for Tablet PC devices since there
is only one device attached. With the newer touch enabled regular
tablets, we can not make this assumption any more, i.e, one system
may have more than one identical tablet plugged in.

This patch adds an new entry, shared, into the struct wacom_wac so
touch data can access pen data to locally. This solution assumes
the two tools (touch and pen) of the same ID will be probed one
after the other without interruption in between by another Wacom
device of the same ID.

Process out and in prox events for Graphire and Tablet PC devices
in the same loop to simplify the data parsing logic.

[re-applying after revert since other patches are based on this one]
Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

When Wacom devices wake up from a sleep, the switch mode command
(wacom_query_tablet_data) is needed before wacom_open is called.
wacom_query_tablet_data should not be executed inside wacom_open
since wacom_open is called more than once during probe.

wacom_retrieve_hid_descriptor is removed from wacom_resume due
to the fact that the required descriptors are stored properly
upon system resume.
Signed-off-by: NPing Cheng <pingc@wacom.com>
Reported-and-tested-by: NAnton Anikin <Anton@Anikin.name>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This reverts commit 776943fd as it
causes issues with ISDv4 E3 touchscreens:

	https://bugzilla.kernel.org/show_bug.cgi?id=15670Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The SSB PCIcore code reused the IO resource fixup code from the original
2.4.x Broadcom patch for BCM47xx based devices, which was a quick hack
for doing PCI IO resource configuration back then (the boot loader
doesn't configure PCI devices on this platform).

However, this code is no longer necessary since the kernel now can do
PCI resource management fine all by itself, so remove the old code.

When removing the code, it becomes obvious that the mem_offset setting
in the PCIcore driver was wrong, however this was masked by the fixup
code before, except in a few cases involving yenta_socket. For BCM47xx,
the correct offset is 0, and since this is the only device using PCIcore
in host mode, the offset can simply be removed unconditionally.
Signed-off-by: NAndreas Ferber <af@chaos-agency.de>
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Cc: Markus Wigge <markus@cultcom.de>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1070/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This reverts commit ba168fc3.

It changes user-visible sysfs interfaces, and breaks some existing user
space applications which apparently rely on the fact that the output
does not contain the "0x" prefix.
Requested-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

"len" hasn't been properly range checked so we shouldn't use it as an
array offset.  This can only be written to by root but it would still be
annoying to accidentally write more than 3 characters and corrupt your
memory.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

There's one known case where we never stop recieving DEFER, and loop here
forever.  Lets not do that..
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

And use our own version of the GPIO table for the INIT_GPIO opcode.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Fixes garbled 3D on an nv46 card.
Reported-by: NFrancesco Marella <francesco.marella@gmail.com>
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NMarcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Allows *some* DP cards to keep working in some corner cases that most
people shouldn't hit.  I hit it all the time with development, so this
can stay for now.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

On DP outputs we'll likely end up running vbios init tables here, which
may sleep.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This value interacts with some registers we don't currently know how to
program properly ourselves.  The default of 5 that we were using matches
what the VBIOS on early DP cards do, but later ones use 6, which would
cause nouveau to program an incorrect mode on these chips.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NMarcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Should fix:
 https://bugzilla.redhat.com/show_bug.cgi?id=505132
 https://bugzilla.redhat.com/show_bug.cgi?id=543091
 https://bugzilla.redhat.com/show_bug.cgi?id=530425
 https://bugs.edge.launchpad.net/ubuntu/+source/xserver-xorg-video-nouveau/
 +bug/539730
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

All indications seem to be that the version 0x30 table should be handled
the same way as 0x40 (as used on G80), at least for the parts that we
currently try use.

This commit cleans up the parsing to make it clearer about what we're
actually trying to achieve, and unifies the 0x30/0x40 parsing.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

As opposed to repeatedly reading the amount back from the GPU every
time we need to know the VRAM size.

We should now fail to load gracefully on detecting no VRAM, rather than
something potentially messy happening.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Previously we were filling it the same as "placements", but in some
cases there're valid alternatives that we were ignoring completely.
Keeping a back-up memory type helps on several low-mem situations.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Fixes the !vbo_fifo path in the 3D driver on certain chipsets.  Still not
really any good idea of what exactly the magic achieves, but it makes
things work.

While we're at it, in the PCIEGART path, flush on unbinding also.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This can't actually happen right now, but lets fix it anyway.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NMarcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Update mtime when writing to backing filesystem using the address space
operations write_begin and write_end.
Signed-off-by: NNikanth Karthikesan <knikanth@suse.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

I don't claim to understand the tty layer, but it seems like hvc_open and
hvc_close should be balanced in their kref reference counting.

Right now we get a kref every call to hvc_open:

        if (hp->count++ > 0) {
                tty_kref_get(tty); <----- here
                spin_unlock_irqrestore(&hp->lock, flags);
                hvc_kick();
                return 0;
        } /* else count == 0 */

        tty->driver_data = hp;

        hp->tty = tty_kref_get(tty); <------ or here if hp->count was 0

But hvc_close has:

        tty_kref_get(tty);

        if (--hp->count == 0) {
...
                /* Put the ref obtained in hvc_open() */
                tty_kref_put(tty);
...
        }

        tty_kref_put(tty);

Since the outside kref get/put balance we only do a single kref_put when
count reaches 0.

The patch below changes things to call tty_kref_put once for every
hvc_close call, and with that my machine boots fine.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Move MULTIPORT feature and related config changes
out of exported headers, and disable the feature
at runtime.

At this point, it seems less risky to keep code around
until we can enable it than rip it out completely.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

The get_buf() API sets the second arg to the number of bytes *written*
by the other side; in this case it should be zero as these are output buffers.

lguest gets this right (obviously kvm's console doesn't), resulting in
continual buildup of console writes.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NAmit Shah <amit.shah@redhat.com>

Currently early_put_chars is not used by virtio_console because it can
only be used once a port has been found, at which point it's too late
because it is no longer needed. This patch should fix it.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

The intent here is to check the "mfrpl->mapped_page_list" allocation.
We checked "mfrpl->ibfrpl.page_list" earlier.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

cap.max_inline_data is incorrectly set in init_attr instead of attr.
Set it in attr so subsequent init_attr.cap assignment will get the
correct value.
Signed-off-by: NChien Tung <chien.tin.tung@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

When manually assigning the path records to use for a connection, save
the number of paths that were set.  Otherwise, checks against num_path
will show 0, even though path record data is available.

This was discovered by manually setting the path records from user
space, then querying the kernel to see if the correct path records
were assigned, only to discover that the kernel returned 0 path
records to the query.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Hide uncached_access() when pgprot_noncached is not #defined.  This prevents
the following warning:

	  CC      drivers/char/mem.o
	drivers/char/mem.c:229: warning: 'uncached_access' defined but not used

Repairs d7d4d849 ("drivers/char/mem.c:
cleanups").
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On exit paths in mxc_rtc_probe() method some resources are not freed
correctly.

This patch fixes:
* unrequested memory region containing imx RTC registers
* iounmap() isn't called on exit_free_pdata branch
* clock get rate is called for freed clock source
* clock isn't disabled on exit_put_clk branch

To simplify the fix managed device resources are used.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NVladimir Zapolskiy <vzapolskiy@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Daniel Mack <daniel@caiaq.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>