Refactor drm_mode_parse_cmdline_options() so that it takes a pointer
to the first option, rather then a pointer to the ',' before the first
option.

This is a preparation patch for allowing parsing of stand-alone options
without a mode before them, e.g.: video=HDMI-1:margin_right=14,...
Acked-by: NMaxime Ripard <mripard@kernel.org>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-5-hdegoede@redhat.com

Before this commit it was impossible to combine an extra mode argument
specified directly after the resolution with an option, e.g.
video=HDMI-1:720x480e,rotate=180 would not work, either the "e" to force
enable would need to be dropped or the ",rotate=180", otherwise the
mode_option would not be accepted.

This commit fixes this by setting parse_extras to true in this case, so
that drm_mode_parse_cmdline_res_mode() parses the extra arguments directly
after the resolution.
Acked-by: NMaxime Ripard <mripard@kernel.org>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-4-hdegoede@redhat.com

Before this commit it was impossible to add an extra mode argument after
a bpp or refresh specifier, combined with an option, e.g.
video=HDMI-1:720x480-24e,rotate=180 would not work, either the "e" to
force enable would need to be dropped or the ",rotate=180", otherwise
the mode_option would not be accepted.

This commit fixes this by fixing the length calculation if extras_ptr
is set to stop the extra parsing at the start of the options (stop at the
',' options_ptr points to).
Acked-by: NMaxime Ripard <mripard@kernel.org>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-3-hdegoede@redhat.com

We are not supposed to modify the passed in string, make char pointers
used in drm_mode_parse_cmdline_options() const char * where possible.
Acked-by: NMaxime Ripard <mripard@kernel.org>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-2-hdegoede@redhat.com

Before this commit, if the last option of a video=... option is for
example "rotate" without a "=<value>" after it then delim will point to
the terminating 0 of the string, and value which is sets to <delim + 1>
will point one position past the end of the string.

This commit fixes this by enforcing that the contents of delim equals '='
as it should be for options which take a value, this check is done in a
new drm_mode_parse_cmdline_int helper function which factors out the
common integer parsing code for all the options which take an int.
Acked-by: NMaxime Ripard <mripard@kernel.org>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-1-hdegoede@redhat.com

The commit 37641379 ("drm/modes: Introduce a whitelist for the named
modes") introduced a whitelist in the named modes lookup code in order to
be a bit more robust.

However, even though the char pointers were made const, the array itself
was not. Let's fix that.

Fixes: 37641379 ("drm/modes: Introduce a whitelist for the named modes")
Suggested-by: NJani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NMaxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190906074614.30608-1-mripard@kernel.org

The named modes support has introduced a number of glitches that were in
part due to the fact that the parser will take any string as a named mode.

Since we shouldn't have a lot of options there (and they should be pretty
standard), let's introduce a whitelist of the available named modes so that
the kernel can differentiate between a poorly formed command line and a
named mode.
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Tested-by: NThomas Graichen <thomas.graichen@gmail.com>
Reviewed-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827115850.25731-3-mripard@kernel.org

The command line parser when it has been rewritten introduced a regression
when the only thing on the command line is an option to force the detection
of a connector (such as video=HDMI-A-1:d), which are completely valid.

It's been further broken by the support for the named modes which take
anything that is not a resolution as a named mode.

Let's fix this by running the extra command line option parser on the named
modes if they only take a single character.

Fixes: e08ab74b ("drm/modes: Rewrite the command line parser")
Reported-by: NJernej Škrabec <jernej.skrabec@gmail.com>
Reported-by: NThomas Graichen <thomas.graichen@googlemail.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Tested-by: NThomas Graichen <thomas.graichen@gmail.com>
Reviewed-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827115850.25731-2-mripard@kernel.org

Some extra command line options can be either specified without anything
else on the command line (basically all the force connection options), but
some other are only relevant when matched with a resolution (margin and
interlace).

Let's add a switch to restrict if needed the available option set.

Fixes: e08ab74b ("drm/modes: Rewrite the command line parser")
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Tested-by: NThomas Graichen <thomas.graichen@gmail.com>
Reviewed-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827115850.25731-1-mripard@kernel.org

strncpy(dest, src, strlen(src)) leads to unterminated
dest, which is dangerous.
Fix it by using strscpy.

Fixes: 3aeeb13d ("drm/modes: Support modes names on the command line")
Signed-off-by: NChuhong Yuan <hslester96@gmail.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190731020140.3529-1-hslester96@gmail.com

Some files got renamed but probably due to some merge conflicts,
a few references still point to the old locations.
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The named mode could be invalid and then cmdline parser misses to validate
mode's dimensions, happily adding 0x0 mode as a valid mode. One case where
this happens is NVIDIA Tegra devices that are using downstream bootloader
which adds "video=tegrafb" to the kernel's cmdline and thus upstream Tegra
DRM driver fails to probe because of the invalid mode.

Fixes: 3aeeb13d ("drm/modes: Support modes names on the command line")
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDmitry Osipenko <digetx@gmail.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709145151.23086-1-digetx@gmail.com

Putting a large drm_connector object on the stack can lead to warnings
in some configuration, such as:

drivers/gpu/drm/selftests/test-drm_cmdline_parser.c:18:12: error: stack frame size of 1040 bytes in function 'drm_cmdline_test_res' [-Werror,-Wframe-larger-than=]
static int drm_cmdline_test_res(void *ignored)

Since the object is never modified, just declare it as 'static const'
and allow this to be passed down.

Fixes: b7ced389 ("drm/selftests: Add command line parser selftests")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628121712.1928142-1-arnd@arndb.de

WARN if the incoming drm_display_mode has an illegal aspect ratio
when converting it to a user mode. This should never happen unless
the driver made a mistake and put an invalid value into the aspect
ratio.

Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620142639.17518-4-ville.syrjala@linux.intel.comReviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Don't let userspace feed us any old garbage in the mode aspect ratio
flags.

Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620142639.17518-3-ville.syrjala@linux.intel.comReviewed-by: NAlex Deucher <alexander.deucher@amd.com>

enum hdmi_picture_aspect is not a bitmask, so don't use bitwise OR
to populate it.

Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620142639.17518-2-ville.syrjala@linux.intel.comReviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Properly configuring the overscan properties might be needed for the
initial setup of the framebuffer for display that still have overscan.
Let's allow for more properties on the kernel command line to setup each
margin.
Reviewed-by: NNoralf Trønnes <noralf@tronnes.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e481f1628e3768ca49226ec2115cfa4dfcbd5e4c.1560783090.git-series.maxime.ripard@bootlin.com

Rotations and reflections setup are needed in some scenarios to initialise
properly the initial framebuffer. Some drivers already had a bunch of
quirks to deal with this, such as either a private kernel command line
parameter (omapdss) or on the device tree (various panels).

In order to accomodate this, let's create a video mode parameter to deal
with the rotation and reflexion.
Reviewed-by: NNoralf Trønnes <noralf@tronnes.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/777da16e42db757c1f5b414b5ca34507097fed5c.1560783090.git-series.maxime.ripard@bootlin.com

The drm subsystem also uses the video= kernel parameter, and in the
documentation refers to the fbdev documentation for that parameter.

However, that documentation also says that instead of giving the mode using
its resolution we can also give a name. However, DRM doesn't handle that
case at the moment. Even though in most case it shouldn't make any
difference, it might be useful for analog modes, where different standards
might have the same resolution, but still have a few different parameters
that are not encoded in the modes (NTSC vs NTSC-J vs PAL-M for example).
Reviewed-by: NNoralf Trønnes <noralf@tronnes.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/18443e0c3bdbbd16cea4ec63bc7f2079b820b43b.1560783090.git-series.maxime.ripard@bootlin.com

Rewrite the command line parser in order to get away from the state machine
parsing the video mode lines.

Hopefully, this will allow to extend it more easily to support named modes
and / or properties set directly on the command line.
Reviewed-by: NNoralf Trønnes <noralf@tronnes.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e32cd4009153b184103554009135c7bf7c9975d7.1560783090.git-series.maxime.ripard@bootlin.com

The use of the drmP.h header file is deprecated.
Remove use from all files in drm/*
so people do not look there and follow a bad example.

Build tested allyesconfig,allmodconfig on x86, arm etc.
Including alpha that is as always more challenging than
the rest.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NDaniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20190526173535.32701-8-sam@ravnborg.org

The DRM_BUS_FLAG_PIXDATA_(POS|NEG)EDGE and
DRM_BUS_FLAG_SYNC_(POS|NEG)EDGE flags are deprecated in favour of the
new DRM_BUS_FLAG_PIXDATA_(DRIVE|SAMPLE)_(POS|NEG)EDGE and
new DRM_BUS_FLAG_SYNC_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags. Replace them
through the code.

This effectively changes the value of the .sampling_edge bridge timings
field in the dumb-vga-dac driver. This is safe to do as no driver
consumes these values yet.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NStefan Agner <stefan@agner.ch>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Most of these are just cases where code comments used contractions
(it's, who's) where they actually mean to use a possessive pronoun (its,
whose) or vice-versa.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202012326.20096-1-matthew.d.roper@intel.com

This patch prevents division by zero htotal.

In a follow-up mail Tina writes:

> > How did you manage to get here with htotal == 0? This needs backtraces (or if
> > this is just about static checkers, a mention of that).
> > -Daniel
>
> In GVT-g, we are trying to enable a virtual display w/o setting timings for a pipe
> (a.k.a htotal=0), then we met the following kernel panic:
>
> [   32.832048] divide error: 0000 [#1] SMP PTI
> [   32.833614] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc4-sriov+ #33
> [   32.834438] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.10.1-0-g8891697-dirty-20180511_165818-tinazhang-linux-1 04/01/2014
> [   32.835901] RIP: 0010:drm_mode_hsync+0x1e/0x40
> [   32.836004] Code: 31 c0 c3 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 8b 87 d8 00 00 00 85 c0 75 22 8b 4f 68 85 c9 78 1b 69 47 58 e8 03 00 00 99 <f7> f9 b9 d3 4d 62 10 05 f4 01 00 00 f7 e1 89 d0 c1 e8 06 f3 c3 66
> [   32.836004] RSP: 0000:ffffc900000ebb90 EFLAGS: 00010206
> [   32.836004] RAX: 0000000000000000 RBX: ffff88001c67c8a0 RCX: 0000000000000000
> [   32.836004] RDX: 0000000000000000 RSI: ffff88001c67c000 RDI: ffff88001c67c8a0
> [   32.836004] RBP: ffff88001c7d03a0 R08: ffff88001c67c8a0 R09: ffff88001c7d0330
> [   32.836004] R10: ffffffff822c3a98 R11: 0000000000000001 R12: ffff88001c67c000
> [   32.836004] R13: ffff88001c7d0370 R14: ffffffff8207eb78 R15: ffff88001c67c800
> [   32.836004] FS:  0000000000000000(0000) GS:ffff88001da00000(0000) knlGS:0000000000000000
> [   32.836004] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [   32.836004] CR2: 0000000000000000 CR3: 000000000220a000 CR4: 00000000000006f0
> [   32.836004] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [   32.836004] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [   32.836004] Call Trace:
> [   32.836004]  intel_mode_from_pipe_config+0x72/0x90
> [   32.836004]  intel_modeset_setup_hw_state+0x569/0xf90
> [   32.836004]  intel_modeset_init+0x905/0x1db0
> [   32.836004]  i915_driver_load+0xb8c/0x1120
> [   32.836004]  i915_pci_probe+0x4d/0xb0
> [   32.836004]  local_pci_probe+0x44/0xa0
> [   32.836004]  ? pci_assign_irq+0x27/0x130
> [   32.836004]  pci_device_probe+0x102/0x1c0
> [   32.836004]  driver_probe_device+0x2b8/0x480
> [   32.836004]  __driver_attach+0x109/0x110
> [   32.836004]  ? driver_probe_device+0x480/0x480
> [   32.836004]  bus_for_each_dev+0x67/0xc0
> [   32.836004]  ? klist_add_tail+0x3b/0x70
> [   32.836004]  bus_add_driver+0x1e8/0x260
> [   32.836004]  driver_register+0x5b/0xe0
> [   32.836004]  ? mipi_dsi_bus_init+0x11/0x11
> [   32.836004]  do_one_initcall+0x4d/0x1eb
> [   32.836004]  kernel_init_freeable+0x197/0x237
> [   32.836004]  ? rest_init+0xd0/0xd0
> [   32.836004]  kernel_init+0xa/0x110
> [   32.836004]  ret_from_fork+0x35/0x40
> [   32.836004] Modules linked in:
> [   32.859183] ---[ end trace 525608b0ed0e8665 ]---
> [   32.859722] RIP: 0010:drm_mode_hsync+0x1e/0x40
> [   32.860287] Code: 31 c0 c3 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 8b 87 d8 00 00 00 85 c0 75 22 8b 4f 68 85 c9 78 1b 69 47 58 e8 03 00 00 99 <f7> f9 b9 d3 4d 62 10 05 f4 01 00 00 f7 e1 89 d0 c1 e8 06 f3 c3 66
> [   32.862680] RSP: 0000:ffffc900000ebb90 EFLAGS: 00010206
> [   32.863309] RAX: 0000000000000000 RBX: ffff88001c67c8a0 RCX: 0000000000000000
> [   32.864182] RDX: 0000000000000000 RSI: ffff88001c67c000 RDI: ffff88001c67c8a0
> [   32.865206] RBP: ffff88001c7d03a0 R08: ffff88001c67c8a0 R09: ffff88001c7d0330
> [   32.866359] R10: ffffffff822c3a98 R11: 0000000000000001 R12: ffff88001c67c000
> [   32.867213] R13: ffff88001c7d0370 R14: ffffffff8207eb78 R15: ffff88001c67c800
> [   32.868075] FS:  0000000000000000(0000) GS:ffff88001da00000(0000) knlGS:0000000000000000
> [   32.868983] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [   32.869659] CR2: 0000000000000000 CR3: 000000000220a000 CR4: 00000000000006f0
> [   32.870599] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [   32.871598] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [   32.872549] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
>
> Since drm_mode_hsync() has the logic to check mode->htotal, I just extend it to cover the case htotal==0.
Signed-off-by: NTina Zhang <tina.zhang@intel.com>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
[danvet: Add additional explanations + cc: stable.]
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1548228539-3061-1-git-send-email-tina.zhang@intel.com

This patch removes the drm_mode_object prints, evaluation and use from
drm_display_mode objects used in drm files. It removes dependency from
drm_mode_object.
Signed-off-by: NShayenne Moura <shayenneluzmoura@gmail.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/785896b0a551464d0b780a55411707300802d6b6.1547214023.git.shayenneluzmoura@gmail.com

In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

For drm_modes.c, the full node path is already printed out, so printing
just the node name a 2nd time is redundant and can be removed.

Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Acked-by: NRob Clark <robdclark@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928225044.20132-1-robh@kernel.org

Since there's very few callers of these I've decided to do them all in
one patch. With this the unecessarily long drm_mode_connector_ prefix
is gone from the codebase! The only exception being struct
drm_mode_connector_set_property, which is part of the uapi so can't be
renamed.

Again done with sed+some manual fixups for indent issues.
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-8-daniel.vetter@ffwll.ch

The sync in some panels needs to be driven by different edge of the pixel
clock compared to data. This is reflected by the
DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE in videmode flags.
Add similar similar definitions for bus_flags and convert the sync drive
edge via drm_bus_flags_from_videomode().
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618132242.8673-2-tomi.valkeinen@ti.com

Print out the modeline when we reject a bad user mode. Avoids having to
guess why it was rejected.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180611193403.16118-2-ville.syrjala@linux.intel.comReviewed-by: NHarry Wentland <harry.wentland@amd.com>

HDMI 2.0/CEA-861-F introduces two new aspect ratios:
- 64:27
- 256:135

This patch:
-  Adds new DRM flags for to represent these new aspect ratios.
-  Adds new cases to handle these aspect ratios while converting
from user->kernel mode or vise versa.

This patch was once reviewed and merged, and later reverted due
to lack of DRM client protection, while adding aspect ratio bits
in user modes. This is a re-spin of the series, with DRM client
cap protection.

The previous series can be found here:
https://pw-emeril.freedesktop.org/series/10850/Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org> (V2)
Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com> (V2)

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>

V3: rebase
V4: rebase
V5: corrected the macro name for an aspect ratio, in a switch case.
V6: rebase
V7: rebase
V8: rebase
V9: rebase
V10: rebase
V11: rebase
V12: rebase
V13: rebase
V14: rebase
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-11-git-send-email-ankit.k.nautiyal@intel.com

Current DRM layer functions don't parse aspect ratio information
while converting a user mode->kernel mode or vice versa. This
causes modeset to pick mode with wrong aspect ratio, eventually
causing failures in HDMI compliance test cases, due to wrong VIC.

This patch adds aspect ratio information in DRM's mode conversion
and mode comparision functions, to make sure kernel picks mode
with right aspect ratio (as per the VIC).

Background:
This patch was once reviewed and merged, and later reverted due to
lack of DRM cap protection. This is a re-spin of this patch, this
time with DRM cap protection, to avoid aspect ratio information, when
the client doesn't request for it.

Review link: https://pw-emeril.freedesktop.org/patch/104068/
Background discussion: https://patchwork.kernel.org/patch/9379057/Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Signed-off-by: NLin, Jia <lin.a.jia@intel.com>
Signed-off-by: NAkashdeep Sharma <akashdeep.sharma@intel.com>
Reviewed-by: Jim Bride <jim.bride@linux.intel.com> (V2)
Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com> (V4)

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>

V3: modified the aspect-ratio check in drm_mode_equal as per new flags
    provided by Ville. https://patchwork.freedesktop.org/patch/188043/
V4: rebase
V5: rebase
V6: As recommended by Ville, avoided matching of aspect-ratio in
    drm_fb_helper, while trying to find a common mode among connectors
    for the target clone mode.
V7: rebase
V8: rebase
V9: rebase
V10: rebase
V11: rebase
V12: rebase
V13: rebase
V14: rebase
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-10-git-send-email-ankit.k.nautiyal@intel.com

Make mode matching less confusing by allowing the caller to specify
which parts of the modes should match via some flags.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NShashank Sharma <shashank.sharma@intel.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-2-git-send-email-ankit.k.nautiyal@intel.com

Apparently xf86-video-vmware leaves the mode->type uninitialized
when feeding the mode to the kernel. Thus we have no choice but
to accept the garbage in. We'll just ignore any of the bits we
don't want. The mode type is just a hint anyway, and more
useful for the kernel->userspace direction.
Reported-by: NThomas Hellstrom <thomas@shipmail.org>
CC: Thomas Hellstrom <thomas@shipmail.org>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Fixes: c6ed6dad ("drm/uapi: Validate the mode flags/type")
References: https://lists.freedesktop.org/archives/dri-devel/2018-March/170213.htmlSigned-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321211246.10152-1-ville.syrjala@linux.intel.comTested-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>

Do the refresh rate calculation with a single division. This gives
us slightly more accurate results, especially for interlaced since
we don't just double the final truncated result.

We do lose one bit compared to the old way, so with an interlaced
mode the new code can only handle ~2GHz instead of the ~4GHz the
old code handeled.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180313150759.27620-2-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

No need to store the return value in a variable since we don't have to
do any unwinding.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180313150759.27620-1-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Quoting the module option format looks soo much nicer, and avoids
sphinx spewing errors about markup issues.

v2: Fix typo in commit message (Thierry).
Reviewed-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180219225356.24996-4-daniel.vetter@ffwll.ch

Allow drivers to provide a device wide .mode_valid() hook in addition to
the already existing crtc/encoder/bridge/connector hooks. This can be
used to validate device/driver wide constraings without having to add
those to the other hooks. And since we call this hook also for user
modes later on in the modeset we don't have to worry about anything the
hook has already rejected.

I also have some further ideas for this hook. Eg. we could replace the
drm_mode_set_crtcinfo(HALVE_V) call in drm_mode_convert_umode()/etc.
with a driver specific variant via this hook. At least on i915 we would
like to pass CRTC_STEREO_DOUBLE to that function instead, and then
we could safely use the crtc_ timings in all our .mode_valid() hooks,
which would allow us to reuse those hooks for validating the
adjusted_mode during a modeset.

v2: Fix the language fails in the kernel docs (Daniel)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114183258.16976-10-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For some reason drm_mode_set_crtcinfo() does nothing if the mode has
the DRM_MODE_TYPE_BUILTIN flag set without the other bit from
DRM_MODE_TYPE_CRTC_C also set. I have zero idea what that is supposed
to achieve, but since we have no users for neither flag bit let's kill
this nonsense off.

v2: Fix typo in commit message
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114183258.16976-7-ville.syrjala@linux.intel.comReviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Currently userspace is allowed to feed in any king of garbage in the
high bits of the mode flags/type, as are drivers when probing modes.
Reject any mode with bogus flags/type.

Hopefully this won't break any current userspace...

v2: Split the type and flags checks to separates ifs (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAdam Jackson <ajax@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115154913.23827-1-ville.syrjala@linux.intel.comReviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Currently we don't sanity check the 3D stereo flags for modes filled out
by the kernel. Move the check from drm_mode_convert_umode() into
drm_mode_validate_basic() so that we get the same check going both ways.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114183258.16976-2-ville.syrjala@linux.intel.comReviewed-by: NAlex Deucher <alexander.deucher@amd.com>