- 05 4月, 2011 1 次提交
-
-
由 Boris Ostrovsky 提交于
Make sure dst_release() is not called with error pointer. This is similar to commit 4910ac6c ("ipv4: Don't ip_rt_put() an error pointer in RAW sockets."). Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 4月, 2011 1 次提交
-
-
由 Mariusz Kozlowski 提交于
On error path kfree() should get pointer to memory allocated by kmalloc() not the address of variable holding it (which is on stack). Signed-off-by: NMariusz Kozlowski <mk@lab.zgora.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 4月, 2011 7 次提交
-
-
由 Ilpo Järvinen 提交于
All callers are prepared for alloc failures anyway, so this error can safely be boomeranged to the callers domain without super bad consequences. ...At worst the connection might go into a state where each RTO tries to (unsuccessfully) re-fragment with such a mis-sized value and eventually dies. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Sometime the ASCONF_ACK parameters can equal to the fourfold of ASCONF parameters, this only happend in some special case: ASCONF parameter is : Unrecognized Parameter (4 bytes) ASCONF_ACK parameter should be: Error Cause Indication parameter (8 bytes header) + Error Cause (4 bytes header) + Unrecognized Parameter (4bytes) Four 4bytes Unrecognized Parameters in ASCONF chunk will cause panic. Pid: 0, comm: swapper Not tainted 2.6.38-next+ #22 Bochs Bochs EIP: 0060:[<c0717eae>] EFLAGS: 00010246 CPU: 0 EIP is at skb_put+0x60/0x70 EAX: 00000077 EBX: c09060e2 ECX: dec1dc30 EDX: c09469c0 ESI: 00000000 EDI: de3c8d40 EBP: dec1dc58 ESP: dec1dc2c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process swapper (pid: 0, ti=dec1c000 task=c09aef20 task.ti=c0980000) Stack: c09469c0 e1894fa4 00000044 00000004 de3c8d00 de3c8d00 de3c8d44 de3c8d40 c09060e2 de25dd80 de3c8d40 dec1dc7c e1894fa4 dec1dcb0 00000040 00000004 00000000 00000800 00000004 00000004 dec1dce0 e1895a2b dec1dcb4 de25d960 Call Trace: [<e1894fa4>] ? sctp_addto_chunk+0x4e/0x89 [sctp] [<e1894fa4>] sctp_addto_chunk+0x4e/0x89 [sctp] [<e1895a2b>] sctp_process_asconf+0x32f/0x3d1 [sctp] [<e188d554>] sctp_sf_do_asconf+0xf8/0x173 [sctp] [<e1890b02>] sctp_do_sm+0xb8/0x159 [sctp] [<e18a2248>] ? sctp_cname+0x0/0x52 [sctp] [<e189392d>] sctp_assoc_bh_rcv+0xac/0xe3 [sctp] [<e1897d76>] sctp_inq_push+0x2d/0x30 [sctp] [<e18a21b2>] sctp_rcv+0x7a7/0x83d [sctp] [<c077a95c>] ? ipv4_confirm+0x118/0x125 [<c073a970>] ? nf_iterate+0x34/0x62 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c0747992>] ip_local_deliver_finish+0xf5/0x194 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c0747a6e>] NF_HOOK.clone.1+0x3d/0x44 [<c0747ab3>] ip_local_deliver+0x3e/0x44 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c074775c>] ip_rcv_finish+0x29f/0x2c7 [<c07474bd>] ? ip_rcv_finish+0x0/0x2c7 [<c0747a6e>] NF_HOOK.clone.1+0x3d/0x44 [<c0747cae>] ip_rcv+0x1f5/0x233 [<c07474bd>] ? ip_rcv_finish+0x0/0x2c7 [<c071dce3>] __netif_receive_skb+0x310/0x336 [<c07221f3>] netif_receive_skb+0x4b/0x51 [<e0a4ed3d>] cp_rx_poll+0x1e7/0x29c [8139cp] [<c072275e>] net_rx_action+0x65/0x13a [<c0445a54>] __do_softirq+0xa1/0x149 [<c04459b3>] ? __do_softirq+0x0/0x149 <IRQ> [<c0445891>] ? irq_exit+0x37/0x72 [<c040a7e9>] ? do_IRQ+0x81/0x95 [<c07b3670>] ? common_interrupt+0x30/0x38 [<c0428058>] ? native_safe_halt+0xa/0xc [<c040f5d7>] ? default_idle+0x58/0x92 [<c0408fb0>] ? cpu_idle+0x96/0xb2 [<c0797989>] ? rest_init+0x5d/0x5f [<c09fd90c>] ? start_kernel+0x34b/0x350 [<c09fd0cb>] ? i386_start_kernel+0xba/0xc1 Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
auth_hmacs field of struct sctp_cookie is used for store Requested HMAC Algorithm Parameter, and each HMAC Identifier is 2 bytes, so the length should be: SCTP_AUTH_NUM_HMACS * sizeof(__u16) + 2 Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michał Mirosław 提交于
dev_ethtool_get_rx_csum() won't report rx checksumming when it's not changeable and driver is converted to hw_features and friends. Fix this. (dev->hw_features & NETIF_F_RXCSUM) check is dropped - if the ethtool_ops->get_rx_csum is set, then driver is not coverted, yet. Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
The documentation for the USB ethernet devices suggests that only some devices are supposed to use usb0 as the network interface name instead of eth0. The logic used there, and documented in Kconfig for CDC is that eth0 will be used when the mac address is a globally assigned one, but usb0 is used for the locally managed range that is typically used on point-to-point links. Unfortunately, this has caused a lot of pain on the smsc95xx device that is used on the popular pandaboard without an EEPROM to store the MAC address, which causes the driver to call random_ether_address(). Obviously, there should be a proper MAC addressed assigned to the device, and discussions are ongoing about how to solve this, but this patch at least makes sure that the default interface naming gets a little saner and matches what the user can expect based on the documentation, including for new devices. The approach taken here is to flag whether a device might be a point-to-point link with the new FLAG_POINTTOPOINT setting in the usbnet driver_info. A driver can set both FLAG_POINTTOPOINT and FLAG_ETHER if it is not sure (e.g. cdc_ether), or just one of the two. The usbnet framework only looks at the MAC address for device naming if both flags are set, otherwise it trusts the flag. Signed-off-by: NArnd Bergmann <arnd.bergmann@linaro.org> Tested-by: NAndy Green <andy.green@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 FUJITA Tomonori 提交于
Now we have CONFIG_ARCH_DMA_ADDR_T_64BIT. We can fix the hacky dma_addr_t size test cleanly. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 4月, 2011 1 次提交
-
-
由 David S. Miller 提交于
Commit 60d9f461 ("appletalk: remove the BKL") added a dereference of "sk" before checking for NULL in atalk_release(). Guard the code block completely, rather than partially, with the NULL check. Reported-by: NDave Jones <davej@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 3月, 2011 9 次提交
-
-
由 Yevgeny Petrilin 提交于
We should reduce the number of reserved completion queues from the total number of entries. Since the queue size is power of two, not reducing the reserved entries, caused a double queue size, which may lead to allocation failures in some cases. Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
In case of allocation failure, tried to use the promiscuous QP entry that was previously freed. Now freeing this entry only in case we will not put it back to the list of promiscuous entries. Reported-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Pan(潘卫平) 提交于
use accumulates instead of acumulates. Signed-off-by: NPan Weiping <panweiping3@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Like DCCP and other similar pieces of code, there are mechanisms here to try allocating smaller hash tables if the allocation fails. So pass in __GFP_NOWARN like the others do instead of emitting a scary message. Reported-by: NDave Jones <davej@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Commits 01a16b21 (netlink: kill eff_cap from struct netlink_skb_parms) and c53fa1ed (netlink: kill loginuid/sessionid/sid members from struct netlink_skb_parms) removed some members from struct netlink_skb_parms that depend on the current context, all netlink users are now required to do synchronous message processing. connector however queues received messages and processes them in a work queue, which is not valid anymore. This patch converts connector to do synchronous message processing by invoking the registered callback handler directly from the netlink receive function. In order to avoid invoking the callback with connector locks held, a reference count is added to struct cn_callback_entry, the reference is taken when finding a matching callback entry on the device's queue_list and released after the callback handler has been invoked. Signed-off-by: NPatrick McHardy <kaber@trash.net> Acked-by: NEvgeniy Polyakov <zbr@ioremap.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Daniel J Blueman reported a lockdep splat in trie_firstleaf(), caused by RTNL being not locked before a call to fib_table_flush() Reported-by: NDaniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philip A. Prindeville 提交于
Don't flap VCs when carrier state changes; higher-level protocols can detect loss of connectivity and act accordingly. This is more consistent with how other network interfaces work. We no longer use release_vccs() so we can delete it. release_vccs() was duplicated from net/atm/common.c; make the corresponding function exported, since other code duplicates it and could leverage it if it were public. Signed-off-by: NPhilip A. Prindeville <philipp@redfish-solutions.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philip A. Prindeville 提交于
Omit pkt_hdr preamble when dumping transmitted packet as hex-dump; we can pull this up because the frame has already been sent, and dumping it is the last thing we do with it before freeing it. Also include the size, vpi, and vci in the debug as is done on receive. Use "port" consistently instead of "device" intermittently. Signed-off-by: NPhilip Prindeville <philipp@redfish-solutions.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philip A. Prindeville 提交于
Use VPI.VCI notation consistently throughout the module. This is the one remaining place where the VCI is used before the VPI in any output. Signed-off-by: NPhilip Prindeville <philipp@redfish-solutions.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 3月, 2011 21 次提交
-
-
由 Jesper Juhl 提交于
We leak in some error paths of drivers/net/atlx/atl2.c:atl2_set_eeprom(). The memory allocated to 'eeprom_buff' is not freed when we return -EIO. This patch fixes that up and also removes a pointless explicit cast. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Lezcano 提交于
In case the device where is coming from the packet has TSO enabled, we should not check the mtu size value as this one could be bigger than the expected value. This is the case for the macvlan driver when the lower device has TSO enabled. The macvlan inherit this feature and forward the packets without fragmenting them. Then the packets go through dev_forward_skb and are dropped. This patch fix this by checking TSO is not enabled when we want to check the mtu size. Signed-off-by: NDaniel Lezcano <daniel.lezcano@free.fr> Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrzej Zaborowski 提交于
This adds a driver for the CDC Ethernet part of this modem. The device's ID is blacklisted in cdc_ether.c and is white-listed in this new driver because of the quirks needed to make it useful. The modem's firmware exposes a CDC ACM port for modem control and a CDC Ethernet port for network data. The descriptors look fine but both ports actually are some sort of multiplexers requiring non- standard headers added/removed from every packet or they get ignored. All information is based on a usb traffic log from a Windows machine. On the Verizon 4G network I've seen speeds up to 1.1MB/s so far with this driver, a speed-o-meter site reports 16.2Mbps/10.5Mbps. Userspace scripts are required to talk to the CDC ACM port. Signed-off-by: NAndrzej Zaborowski <balrogg@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marc Kleine-Budde 提交于
The function phy_attach_direct attaches the phy and calls phy_init_hw. phy_init_hw can fail, but the phy is still marked as attached. Successive calls to phy_attach_direct will fail because the phy is busy. [ 1.020000] eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:00, irq=-1) [ 1.030000] eth1: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:01, irq=-1) [ 2.050000] Sending DHCP requests . [ 3.020000] PHY: 1:00 - Link is Up - 100/Full [ 5.110000] ..... timed out! [ 87.660000] IP-Config: Reopening network devices... [ 88.190000] FEC: MDIO read timeout [ 88.190000] eth0: could not attach to PHY [ 88.190000] IP-Config: Failed to open eth0 [ 88.210000] FEC: MDIO read timeout [ 88.210000] eth1: could not attach to PHY [ 88.210000] IP-Config: Failed to open eth1 [ 88.220000] IP-Config: No network devices available. [ 88.220000] Freeing init memory: 6968K [...] starting network interfaces... ip: RTNETLINK answers: File exists [ 94.000000] net eth0: PHY already attached [ 94.010000] eth0: could not attach to PHY ip: SIOCSIFFLAGS: Device or resource busy This patch adds phy_detach to clean up if phy_init_hw fails. Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Lüssing 提交于
"len = ntohs(ip6h->payload_len)" does not include the length of the ipv6 header itself, which the rest of this function assumes, though. This leads to a length check less restrictive as it should be in the following line for one thing. For another, it very likely leads to an integer underrun when substracting the offset and therefore to a very high new value of 'len' due to its unsignedness. This will ultimately lead to the pskb_trim_rcsum() practically never being called, even in the cases where it should. Signed-off-by: NLinus Lüssing <linus.luessing@web.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
via-ircc has been passing a NULL pointer to DMA allocation functions, which is completely invalid and results in a BUG on PowerPC. Now that we always have the device pointer available, pass it in. Reference: http://bugs.debian.org/619450Reported-by: NAndrew Buckeridge <andrewb@bgc.com.au> Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Tested-by: Andrew Buckeridge <andrewb@bgc.com.au> [against 2.6.32] Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
via-ircc still maintains its own array of device pointers in Linux 2.4 style. Worse, it always uses index 0, so it will crash if there are multiple suitable devices in the system. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Timo Teräs 提交于
My commit 6d55cb91 (gre: fix hard header destination address checking) broke multicast. The reason is that ip_gre used to get ipgre_header() calls with zero destination if we have NOARP or multicast destination. Instead the actual target was decided at ipgre_tunnel_xmit() time based on per-protocol dissection. Instead of allowing the "abuse" of ->header() calls with invalid destination, this creates multicast mappings for ip_gre. This also fixes "ip neigh show nud noarp" to display the proper multicast mappings used by the gre device. Reported-by: NDoug Kehn <rdkehn@yahoo.com> Signed-off-by: NTimo Teräs <timo.teras@iki.fi> Acked-by: NDoug Kehn <rdkehn@yahoo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Balaji G 提交于
net/bridge/br_stp_if.c: In function ‘br_stp_recalculate_bridge_id’: net/bridge/br_stp_if.c:216:3: warning: ‘return’ with no value, in function returning non-void Signed-off-by: NG.Balaji <balajig81@gmail.com> Acked-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
After commit a715dea3 ("net: Always allocate at least 16 skb frags regardless of page size"), the value of MAX_SKB_FRAGS can now take on either an "unsigned long" or an "int" value. This causes warnings like: net/packet/af_packet.c: In function ‘tpacket_fill_skb’: net/packet/af_packet.c:948: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 2 has type ‘int’ Fix by forcing the constant to be unsigned long, otherwise we have a situation where the type of a system wide constant is variable. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
If change_interface gets invoked during a firmware restart, it may crash; prevent that from happening by checking if ctx->vif is assigned. Additionally, in my initial commit I forgot to set the vif->p2p variable correctly, so fix that too. Cc: stable@kernel.org [2.6.38+] Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
Some clients seem to rely upon the reception of BlockAckReqs to flush their rx reorder buffer. In order to fix aggregation for these clients carl9170 should set IEEE80211_TX_STAT_AMPDU_NO_BACK to generate a BlockAckReq if the transmission of an AMPDU subframe fails. This fixes aggregation problems with Intel 5100 Windows STAs (and maybe others as well). Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
After new NetworkManager 0.8.996 changes, hardware scanning is causing microcode errors as reported here: https://bugzilla.redhat.com/show_bug.cgi?id=683571 and sometimes kernel crashes: https://bugzilla.redhat.com/show_bug.cgi?id=688252 Also with hw scan there are very bad performance on some systems as reported here: https://bugzilla.redhat.com/show_bug.cgi?id=671366 Since Intel no longer supports 3945, there is no chance to get proper firmware fixes, we need workaround problems by disable hardware scanning by default. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Xose Vazquez Perez 提交于
taken from staging/rt2860 0x0411,0x016f de37cd49 MelCo(Buffalo) WLI-UC-G301N 0x050d,0x825b 12840c63 Belkin F5D8055 0x050d,0x935a 705059a6 Belkin F6D4050 v1 0x050d,0x935b 5d92fe33 Belkin F6D4050 v2 identifed from ralink driverss 0x0930,0x0a07 RT35xx TOSHIBA 2010_1215_RT3572_Linux_STA_v2.5.0.0.DPO 0x1d4d,0x0011 3072 Pegatron 2011_0107_RT3070_RT3370_Linux_STA_v2.5.0.1_DPO Signed-off-by: NXose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Software scanning can be used for workaround some performance problems, so do not deprecate it. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Acked-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (26 commits) mmc: SDHI should depend on SUPERH || ARCH_SHMOBILE mmc: tmio_mmc: Move some defines into a shared header mmc: tmio: support aggressive clock gating mmc: tmio: fix power-mode interpretation mmc: tmio: remove work-around for unmasked SDIO interrupts sh: fix SDHI IO address-range ARM: mach-shmobile: fix SDHI IO address-range mmc: tmio: only access registers above 0xff, if available mfd: remove now redundant sh_mobile_sdhi.h header sh: convert boards to use linux/mmc/sh_mobile_sdhi.h ARM: mach-shmobile: convert boards to use linux/mmc/sh_mobile_sdhi.h mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver sh: ecovec: use the CONFIG_MMC_TMIO symbols instead of MFD mmc: tmio: split core functionality, DMA and MFD glue mmc: tmio: use PIO for short transfers mmc: tmio-mmc: Improve DMA stability on sh-mobile mmc: fix mmc_app_send_scr() for dma transfer mmc: sdhci-esdhc: enable esdhc on imx53 mmc: sdhci-esdhc: use writel/readl as general APIs mmc: sdhci: add the abort CMDTYPE bits definition ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv由 Linus Torvalds 提交于
* 'frv' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv: FRV: Use generic show_interrupts() FRV: Convert genirq namespace frv: Select GENERIC_HARDIRQS_NO_DEPRECATED frv: Convert cpu irq_chip to new functions frv: Convert mb93493 irq_chip to new functions frv: Convert mb93093 irq_chip to new function frv: Convert mb93091 irq_chip to new functions frv: Fix typo from __do_IRQ overhaul frv: Remove stale irq_chip.end FRV: Do some cleanups FRV: Missing node arg in alloc_thread_info_node() macro NOMMU: implement access_remote_vm NOMMU: support SMP dynamic percpu_alloc NOMMU: percpu should use is_vmalloc_addr().
-
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen由 Linus Torvalds 提交于
* 'stable/bug-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: Use new irq_move functions xen: Convert genirq namespace xen: fix p2m section mismatches xen/p2m: Allocate p2m tracking pages on override xen-gntdev: unlock on error path in gntdev_mmap() xen-gntdev: return -EFAULT on copy_to_user failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: softdog.c: enhancement to optionally invoke panic instead of reboot on timer expiry watchdog: fix nv_tco section mismatch watchdog: sp5100_tco.c: Check if firmware has set correct value in tcobase. watchdog: Convert release_resource to release_region/release_mem_region watchdog: s3c2410_wdt.c: Convert release_resource to release_region/release_mem_region
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Fix potential memleak
-