- Update ena_ethtool:ena_get_channels() to return adapter->max_io_queues
  so that ethtool -l returns the correct maximum queue number.

- Change the name of ena_calc_io_queue_num() to
  ena_calc_max_io_queue_num() as it returns the maximum number of io
  queues and actual number of queues can be smaller if changed
  by ethtool -L which is implemented in a later commit.

- Change variable name from io_queue_num to max_num_io_queues in
  ena_calc_max_io_queue_num() and ena_probe().

- Make all types of variables that convey the number and sizeof queues
  to be u32, for consistency with the API between the driver and the
  device.
Signed-off-by: NArthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: NSameeh Jubran <sameehj@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since we use the same IRQ and NAPI to service RX and TX then we need to
use a combined channel instead of rx and tx channels.
Signed-off-by: NSameeh Jubran <sameehj@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Rename ena_calc_queue_size() to ena_calc_io_queue_size() for clarity
  and consistency
- Remove redundant number of io queues parameter in functions
  ena_enable_msix() and ena_enable_msix_and_set_admin_interrupts(),
  which already get adapter parameter, so use adapter->num_io_queues
  in the function instead.
- Use the local variable ena_dev instead of ctx->ena_dev in
  ena_calc_io_queue_size
- Fix multi row comment alignments
Signed-off-by: NArthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: NSameeh Jubran <sameehj@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Most places in the code refer to the IO queues as io_queues and not
simply queues. Examples - max_io_queues_per_vf, ENA_MAX_NUM_IO_QUEUES,
ena_destroy_all_io_queues() etc..

We are also adding the new max_num_io_queues field to struct ena_adapter
in the following commit.

The changes included in this commit are:
struct ena_adapter->num_queues => struct ena_adapter->num_io_queues
Signed-off-by: NArthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: NSameeh Jubran <sameehj@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel T. Lee says:

====================
samples: pktgen: allow to specify destination IP range

Currently, pktgen script supports specify destination port range.

To further extend the capabilities, this commit allows to specify destination
IP range with CIDR when running pktgen script.

Specifying destination IP range will be useful on various situation such as
testing RSS/RPS with randomizing n-tuple.

This patchset fixes the problem with checking the command result on proc_cmd,
and add feature to allow destination IP range.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, kernel pktgen has the feature to specify destination
address range for sending packet. (e.g. pgset "dst_min/dst_max")

But on samples, each pktgen script doesn't have any option to achieve this.

This commit adds the feature to specify the destination address range with CIDR.

    -d : ($DEST_IP)   destination IP. CIDR (e.g. 198.18.0.0/15) is also allowed

    # ./pktgen_sample01_simple.sh -6 -d fe80::20/126 -p 3000 -n 4
    # tcpdump ip6 and udp
    05:14:18.082285 IP6 fe80::99.71 > fe80::23.3000: UDP, length 16
    05:14:18.082564 IP6 fe80::99.43 > fe80::23.3000: UDP, length 16
    05:14:18.083366 IP6 fe80::99.107 > fe80::22.3000: UDP, length 16
    05:14:18.083585 IP6 fe80::99.97 > fe80::21.3000: UDP, length 16
Signed-off-by: NDaniel T. Lee <danieltimlee@gmail.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This commit adds CIDR parsing and IP validate helper function to parse
single IP or range of IP with CIDR. (e.g. 198.18.0.0/15)

Validating the address should be preceded prior to the parsing.
Helpers will be used in prior to set target address in samples/pktgen.
Signed-off-by: NDaniel T. Lee <danieltimlee@gmail.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, proc_cmd is used to dispatch command to 'pg_ctrl', 'pg_thread',
'pg_set'. proc_cmd is designed to check command result with grep the
"Result:", but this might fail since this string is only shown in
'pg_thread' and 'pg_set'.

This commit fixes this logic by grep-ing the "Result:" string only when
the command is not for 'pg_ctrl'.

For clarity of an execution flow, 'errexit' flag has been set.

To cleanup pktgen on exit, trap has been added for EXIT signal.
Signed-off-by: NDaniel T. Lee <danieltimlee@gmail.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This commit changes variable names that can cause confusion.

For example, variable DST_MIN is quite confusing since the
keyword 'udp_dst_min' and keyword 'dst_min' is used with pg_ctrl.

On the following commit, 'dst_min' will be used to set destination IP,
and the existing variable name DST_MIN should be changed.

Variable names are matched to the exact keyword used with pg_ctrl.
Signed-off-by: NDaniel T. Lee <danieltimlee@gmail.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
netdevsim: implement devlink dev_info op

Initial implementation of devlink dev_info op - just driver name is
filled up and sent to user. Bundled with selftest.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add test to verify netdevsim driver name returned by devlink dev info.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Do simple dev_info devlink operation implementation which only fills up
the driver name.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order for attrs to be prepared for reporter dump dumpit callback,
set GENL_DONT_VALIDATE_DUMP_STRICT instead of GENL_DONT_VALIDATE_DUMP.

Fixes: ee85da53 ("devlink: have genetlink code to parse the attrs during dumpit"
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jose Abreu says:

====================
net: stmmac: Improvements for -next

Improvements for -next. More info in commit logs.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

GMAC4+ cores support Layer 3 and Layer 4 filtering. Add the
corresponding callbacks in these cores.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add two new tests for VLAN Perfect Filtering. While at it, increase a
little bit the tests strings lenght so that we can have more descriptive
test names.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If VLAN Hash Filtering is not available we can fallback to perfect
filtering instead. Let's implement this in XGMAC and GMAC cores and let
the user use this filter.

VLAN VID=0 always passes filter so we check if more than 2 VLANs are
created and return proper error code if so because perfect filtering
only supports 1 VID at a time.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix build error:

net/rds/ib_cm.c: In function rds_dma_hdrs_alloc:
net/rds/ib_cm.c:475:13: error: implicit declaration of function dma_pool_zalloc; did you mean mempool_alloc? [-Werror=implicit-function-declaration]
   hdrs[i] = dma_pool_zalloc(pool, GFP_KERNEL, &hdr_daddrs[i]);
             ^~~~~~~~~~~~~~~
             mempool_alloc

net/rds/ib.c: In function rds_ib_dev_free:
net/rds/ib.c:111:3: error: implicit declaration of function dma_pool_destroy; did you mean mempool_destroy? [-Werror=implicit-function-declaration]
   dma_pool_destroy(rds_ibdev->rid_hdrs_pool);
   ^~~~~~~~~~~~~~~~
   mempool_destroy
Reported-by: NHulk Robot <hulkci@huawei.com>
Fixes: 9b17f588 ("net/rds: Use DMA memory pool allocation for rds_header")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Query number of modules from firmware

Vadim says:

The patchset adds support for a new field "num_of_modules" of Management
General Peripheral Information Register (MGPIR), providing the maximum
number of QSFP modules, which can be supported by the system.

It allows to obtain the number of QSFP modules directly from this field,
as a static data, instead of old method of getting this info through
"network port to QSFP module" mapping. With the old method, in case of
port dynamic re-configuration some modules can logically "disappear" as
a result of port split operations, which can cause some modules to
appear missing.

Such scenario can happen on a system equipped with a BMC card, while PCI
chip driver at host CPU side can perform some ports "split" or "unsplit"
operations, while BMC side I2C chip driver reads the "port-to-module"
mapping.

Add common API for FW "minor" and "subminor" versions validation and
share it between PCI and I2C based drivers.

Add FW version validation for "minimal" driver, because use of new field
"num_of_modules" in MGPIR register is not backward compatible.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add validation for FW version in order to prevent driver initialization
in case FW version is older than expected. FW version validation is
necessary, because use of a new field 'num_of_modules' in MGPIR register
is not backward compatible. FW 'minor' and 'subminor' versions are
expected to be greater than or equal to 2000 and 1886, respectively.
Signed-off-by: NVadim Pasternak <vadimp@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add new API for FW "minor" and "subminor" version validation for
sharing it between "spectrum" and "minimal" drivers.
Use it in "spectrum" driver.
Signed-off-by: NVadim Pasternak <vadimp@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use new field "num_of_modules" of MGPIR register for "thermal" interface
in order to get the number of modules supported by system directly from
the system configuration, instead of getting it from port to module
mapping info.
Signed-off-by: NVadim Pasternak <vadimp@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use new field "num_of_modules" of MGPIR register for "hwmon" interface
in order to get the number of modules supported by system directly from
the system configuration, instead of getting it from port to module
mapping info.

Reading this info through MGPIR register is faster and does not depend
on possible dynamic re-configuration of ports.
In case of port dynamic re-configuration some modules can logically
"disappear" as a result of port split and un-spilt operations, which
can cause missing of some modules, in case this info is taken from port
to module mapping info.
Signed-off-by: NVadim Pasternak <vadimp@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Extend MGPIR - Management General Peripheral Information Register
with new field "num_of_modules" exposing the number of modules
supported by specific system.
Signed-off-by: NVadim Pasternak <vadimp@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
netdevsim: allow to test reload failures

Allow user to test devlink reload failures: Fail to reload and fail
during reload.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Extend netdevsim reload test by simulation of failures.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add flag to disallow reload and another one that causes reload to
always fail.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
net: genetlink: parse attrs for dumpit() callback

In generic netlink, parsing attributes for doit() callback is already
implemented. They are available in info->attrs.

For dumpit() however, each user which is interested in attributes have to
parse it manually. Even though the attributes may be (depending on flag)
already validated (by parse function).

Make usage of attributes in dumpit() more convenient and prepare
info->attrs too.

Patchset also make the existing users of genl_family_attrbuf() converted
to use info->attrs and removes the helper.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Benefit from the fact that the generic netlink code can parse the attrs
for dumpit op and avoid need to parse it in the op callback.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

genl_family_attrbuf() function is no longer used by anyone, so remove it.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As this is the last user of genl_family_attrbuf, convert to allocate
attrs locally and do it in a similar way this is done in compat_doit().
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Benefit from the fact that the generic netlink code can parse the attrs
for dumpit op and avoid need to parse it in the op callback.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Benefit from the fact that the generic netlink code can parse the attrs
for dumpit op and avoid need to parse it in the op callback.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Benefit from the fact that the generic netlink code can parse the attrs
for dumpit op and avoid need to parse it in the op callback.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Extend the dumpit info struct for attrs. Instead of existing attribute
validation do parse them and save in the info struct. Caller can benefit
from this and does not have to do parse itself. In order to properly
free attrs, genl_family pointer needs to be added to dumpit info struct
as well.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To be re-usable by dumpit as well, push the code that is taking care of
attrbuf allocation and parting from doit into separate function.
Introduce a helper to free the buffer too.

Check family->maxattr too before calling kfree() to be symmetrical with
the allocation check.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the cb->data is taken by ops during non-parallel dumping.
Introduce a new structure genl_dumpit_info and store the ops there.
Distribute the info to both non-parallel and parallel dumping. Also add
a helper genl_dumpit_info() to easily get the info structure in the
dumpit callback from cb.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>