To differentiate between inode and vfsmount (or other future) types of
marks we add a flags field and set the inode bit on inode marks (the only
currently supported type of mark)
Signed-off-by: NEric Paris <eparis@redhat.com>

The addition of marks on vfs mounts will be simplified if the inode
specific parts of a mark and the vfsmnt specific parts of a mark are
actually in a union so naming can be easy.  This patch just implements the
inode struct and the union.
Signed-off-by: NEric Paris <eparis@redhat.com>

currently all of the notification systems implemented select which inodes
they care about and receive messages only about those inodes (or the
children of those inodes.)  This patch begins to flesh out fsnotify support
for the concept of listeners that want to hear notification for an inode
accessed below a given monut point.  This patch implements a second list
of fsnotify groups to hold these types of groups and a second global mask
to hold the events of interest for this type of group.

The reason we want a second group list and mask is because the inode based
notification should_send_event support which makes each group look for a mark
on the given inode.  With one nfsmount listener that means that every group would
have to take the inode->i_lock, look for their mark, not find one, and return
for every operation.   By seperating vfsmount from inode listeners only when
there is a inode listener will the inode groups have to look for their
mark and take the inode lock.  vfsmount listeners will have to grab the lock and
look for a mark but there should be fewer of them, and one vfsmount listener
won't cause the i_lock to be grabbed and released for every fsnotify group
on every io operation.
Signed-off-by: NEric Paris <eparis@redhat.com>

Currently all fsnotify groups are added immediately to the
fsnotify_inode_groups list upon creation.  This means, even groups with no
watches (common for audit) will be on the global tracking list and will
get checked for every event.  This patch adds groups to the global list on
when the first inode mark is added to the group.
Signed-of-by: NEric Paris <eparis@redhat.com>

This patch allows a task to add a second fsnotify mark to an inode for the
same group.  This mark will be added to the end of the inode's list and
this will never be found by the stand fsnotify_find_mark() function.   This
is useful if a user wants to add a new mark before removing the old one.
Signed-off-by: NEric Paris <eparis@redhat.com>

Simple copy fsnotify information from one mark to another in preparation
for the second mark to replace the first.
Signed-off-by: NEric Paris <eparis@redhat.com>

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

fsnotify_add_mark is supposed to add a mark to the g_list and i_list and to
set the group and inode for the mark.  fsnotify_destroy_mark_by_entry uses
the fact that ->group != NULL to know if this group should be destroyed or
if it's already been done.

But fsnotify_add_mark sets the group and inode before it actually adds the
mark to the i_list and g_list.  This can result in a race in inotify, it
requires 3 threads.

sys_inotify_add_watch("file")	sys_inotify_add_watch("file")	sys_inotify_rm_watch([a])
inotify_update_watch()
inotify_new_watch()
inotify_add_to_idr()
   ^--- returns wd = [a]
				inotfiy_update_watch()
				inotify_new_watch()
				inotify_add_to_idr()
				fsnotify_add_mark()
				   ^--- returns wd = [b]
				returns to userspace;
								inotify_idr_find([a])
								   ^--- gives us the pointer from task 1
fsnotify_add_mark()
   ^--- this is going to set the mark->group and mark->inode fields, but will
return -EEXIST because of the race with [b].
								fsnotify_destroy_mark()
								   ^--- since ->group != NULL we call back
									into inotify_freeing_mark() which calls
								inotify_remove_from_idr([a])

since fsnotify_add_mark() failed we call:
inotify_remove_from_idr([a])     <------WHOOPS it's not in the idr, this could
					have been any entry added later!

The fix is to make sure we don't set mark->group until we are sure the mark is
on the inode and fsnotify_add_mark will return success.
Signed-off-by: NEric Paris <eparis@redhat.com>

Most fsnotify listeners (all but inotify) do not care about marks being
freed.  Allow groups to set freeing_mark to null and do not call any
function if it is set that way.
Signed-off-by: NEric Paris <eparis@redhat.com>

When an fs is unmounted with an fsnotify mark entry attached to one of its
inodes we need to destroy that mark entry and we also (like inotify) send
an unmount event.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>

This patch pins any inodes with an fsnotify mark in core.  The idea is that
as soon as the mark is removed from the inode->fsnotify_mark_entries list
the inode will be iput.  In reality is doesn't quite work exactly this way.
The igrab will happen when the mark is added to an inode, but the iput will
happen when the inode pointer is NULL'd inside the mark.

It's possible that 2 racing things will try to remove the mark from
different directions.  One may try to remove the mark because of an
explicit request and one might try to remove it because the inode was
deleted.  It's possible that the removal because of inode deletion will
remove the mark from the inode's list, but the removal by explicit request
will actually set entry->inode == NULL; and call the iput.  This is safe.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>

inotify and dnotify both use a similar parent notification mechanism.  We
add a generic parent notification mechanism to fsnotify for both of these
to use.  This new machanism also adds the dentry flag optimization which
exists for inotify to dnotify.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>

This patch creates a way for fsnotify groups to attach marks to inodes.
These marks have little meaning to the generic fsnotify infrastructure
and thus their meaning should be interpreted by the group that attached
them to the inode's list.

dnotify and inotify  will make use of these markings to indicate which
inodes are of interest to their respective groups.  But this implementation
has the useful property that in the future other listeners could actually
use the marks for the exact opposite reason, aka to indicate which inodes
it had NO interest in.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>