Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 27 4月, 2017 1 次提交
  3. 21 4月, 2017 4 次提交
    • M
      KVM: x86: remove irq disablement around KVM_SET_CLOCK/KVM_GET_CLOCK · e891a32e
      由 Marcelo Tosatti 提交于 
      The disablement of interrupts at KVM_SET_CLOCK/KVM_GET_CLOCK
attempts to disable software suspend from causing "non atomic behaviour" of
the operation:

    Add a helper function to compute the kernel time and convert nanoseconds
    back to CPU specific cycles.  Note that these must not be called in preemptible
    context, as that would mean the kernel could enter software suspend state,
    which would cause non-atomic operation.

However, assume the kernel can enter software suspend at the following 2 points:

        ktime_get_ts(&ts);
1.
						hypothetical_ktime_get_ts(&ts)
        monotonic_to_bootbased(&ts);
2.

monotonic_to_bootbased() should be correct relative to a ktime_get_ts(&ts)
performed after point 1 (that is after resuming from software suspend),
hypothetical_ktime_get_ts()

Therefore it is also correct for the ktime_get_ts(&ts) before point 1,
which is

	ktime_get_ts(&ts) = hypothetical_ktime_get_ts(&ts) + time-to-execute-suspend-code

Note CLOCK_MONOTONIC does not count during suspension.

So remove the irq disablement, which causes the following warning on
-RT kernels:

 With this reasoning, and the -RT bug that the irq disablement causes
 (because spin_lock is now a sleeping lock), remove the IRQ protection as it
 causes:

 [ 1064.668109] in_atomic(): 0, irqs_disabled(): 1, pid: 15296, name:m
 [ 1064.668110] INFO: lockdep is turned off.
 [ 1064.668110] irq event stamp: 0
 [ 1064.668112] hardirqs last  enabled at (0): [<          (null)>]  )
 [ 1064.668116] hardirqs last disabled at (0): [] c0
 [ 1064.668118] softirqs last  enabled at (0): [] c0
 [ 1064.668118] softirqs last disabled at (0): [<          (null)>]  )
 [ 1064.668121] CPU: 13 PID: 15296 Comm: qemu-kvm Not tainted 3.10.0-1
 [ 1064.668121] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 5
 [ 1064.668123]  ffff8c1796b88000 00000000afe7344c ffff8c179abf3c68 f3
 [ 1064.668125]  ffff8c179abf3c90 ffffffff930ccb3d ffff8c1b992b3610 f0
 [ 1064.668126]  00007ffc1a26fbc0 ffff8c179abf3cb0 ffffffff9375f694 f0
 [ 1064.668126] Call Trace:
 [ 1064.668132]  [] dump_stack+0x19/0x1b
 [ 1064.668135]  [] __might_sleep+0x12d/0x1f0
 [ 1064.668138]  [] rt_spin_lock+0x24/0x60
 [ 1064.668155]  [] __get_kvmclock_ns+0x36/0x110 [k]
 [ 1064.668159]  [] ? futex_wait_queue_me+0x103/0x10
 [ 1064.668171]  [] kvm_arch_vm_ioctl+0xa2/0xd70 [k]
 [ 1064.668173]  [] ? futex_wait+0x1ac/0x2a0

v2: notice get_kvmclock_ns with the same problem (Pankaj).
v3: remove useless helper function (Pankaj).
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      e891a32e
    • M
      kvm: better MWAIT emulation for guests · 668fffa3
      由 Michael S. Tsirkin 提交于 
      Guests that are heavy on futexes end up IPI'ing each other a lot. That
can lead to significant slowdowns and latency increase for those guests
when running within KVM.

If only a single guest is needed on a host, we have a lot of spare host
CPU time we can throw at the problem. Modern CPUs implement a feature
called "MWAIT" which allows guests to wake up sleeping remote CPUs without
an IPI - thus without an exit - at the expense of never going out of guest
context.

The decision whether this is something sensible to use should be up to the
VM admin, so to user space. We can however allow MWAIT execution on systems
that support it properly hardware wise.

This patch adds a CAP to user space and a KVM cpuid leaf to indicate
availability of native MWAIT execution. With that enabled, the worst a
guest can do is waste as many cycles as a "jmp ." would do, so it's not
a privilege problem.

We consciously do *not* expose the feature in our CPUID bitmap, as most
people will want to benefit from sleeping vCPUs to allow for over commit.
Reported-by: N"Gabriel L. Somlo" <gsomlo@gmail.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
[agraf: fix amd, change commit message]
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      668fffa3
    • K
      KVM: x86: virtualize cpuid faulting · db2336a8
      由 Kyle Huey 提交于 
      Hardware support for faulting on the cpuid instruction is not required to
emulate it, because cpuid triggers a VM exit anyways. KVM handles the relevant
MSRs (MSR_PLATFORM_INFO and MSR_MISC_FEATURES_ENABLE) and upon a
cpuid-induced VM exit checks the cpuid faulting state and the CPL.
kvm_require_cpl is even kind enough to inject the GP fault for us.
Signed-off-by: NKyle Huey <khuey@kylehuey.com>
Reviewed-by: NDavid Matlack <dmatlack@google.com>
[Return "1" from kvm_emulate_cpuid, it's not void. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      db2336a8
    • D
      KVM: VMX: drop vmm_exclusive module parameter · fe0e80be
      由 David Hildenbrand 提交于 
      vmm_exclusive=0 leads to KVM setting X86_CR4_VMXE always and calling
VMXON only when the vcpu is loaded. X86_CR4_VMXE is used as an
indication in cpu_emergency_vmxoff() (called on kdump) if VMXOFF has to be
called. This is obviously not the case if both are used independtly.
Calling VMXOFF without a previous VMXON will result in an exception.

In addition, X86_CR4_VMXE is used as a mean to test if VMX is already in
use by another VMM in hardware_enable(). So there can't really be
co-existance. If the other VMM is prepared for co-existance and does a
similar check, only one VMM can exist. If the other VMM is not prepared
and blindly sets/clears X86_CR4_VMXE, we will get inconsistencies with
X86_CR4_VMXE.

As we also had bug reports related to clearing of vmcs with vmm_exclusive=0
this seems to be pretty much untested. So let's better drop it.

While at it, directly move setting/clearing X86_CR4_VMXE into
kvm_cpu_vmxon/off.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      fe0e80be
  5. 14 4月, 2017 1 次提交
    • R
      KVM: nVMX: fix AD condition when handling EPT violation · 33251870
      由 Radim Krčmář 提交于 
      I have introduced this bug when applying and simplifying Paolo's patch
as we agreed on the list.  The original was "x &= ~y; if (z) x |= y;".

Here is the story of a bad workflow:

  A maintainer was already testing with the intended change, but it was
  applied only to a testing repo on a different machine.  When the time
  to push tested patches to kvm/next came, he realized that this change
  was missing and quickly added it to the maintenance repo, didn't test
  again (because the change is trivial, right), and pushed the world to
  fire.

Fixes: ae1e2d10 ("kvm: nVMX: support EPT accessed/dirty bits")
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
      33251870
  7. 13 4月, 2017 26 次提交
  9. 07 4月, 2017 8 次提交