Signed-off-by: NJeff Garzik <jeff@garzik.org>

The ethtool_ops structure is immutable, it expected to be setup
by the driver and is never changed. This patch allows drivers to
declare there ethtool_ops structure read-only.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix support for big endian platforms like PPC.
Still not sure about VLAN acceleration (does it need swapping)?
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix the support for fiber connected gigabit boards.
Allow half duplex gigabit to be configured.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix problems with transmit pause frames. The driver was telling the
GMAC to flush (not process) pause frames. Manually disabling pause wasn't
working because of problems in the setup.

This maybe the cause of the lockup under load.
	http://bugzilla.kernel.org/show_bug.cgi?id=6839

Patch against netdev-2.6 git tree
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NJeff Garzik <jeff@garzik.org>

Hi Jeff,

I fixed the __iomem issue and tested the driver with sparse. Looks good so far.
Thanks for your effort.

Jan-Bernd Themann
Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com>

 drivers/net/Kconfig             |    9
 drivers/net/Makefile            |    1
 drivers/net/ehea/Makefile       |    6
 drivers/net/ehea/ehea.h         |  447 ++++++
 drivers/net/ehea/ehea_ethtool.c |  294 ++++
 drivers/net/ehea/ehea_hcall.h   |   51
 drivers/net/ehea/ehea_hw.h      |  287 ++++
 drivers/net/ehea/ehea_main.c    | 2654 ++++++++++++++++++++++++++++++++++++++++
 drivers/net/ehea/ehea_phyp.c    |  705 ++++++++++
 drivers/net/ehea/ehea_phyp.h    |  455 ++++++
 drivers/net/ehea/ehea_qmr.c     |  582 ++++++++
 drivers/net/ehea/ehea_qmr.h     |  358 +++++
 12 files changed, 5849 insertions(+)
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Implement NAPI changes to pcnet32 driver.  Compile default is off.
Listed as experimental.

Len and Don both worked on a NAPI implementation and have both tested
these changes.

An e1000 blasting short packets to the pcnet32 will lockup Don's system
until the receive storm stops.  Without NAPI Len's system watchdog would
expire causing the system to reboot.  With NAPI the system will stay
operational.

Tested ia32 and ppc64.  Tested '970A, '971, '972, '973, '975, '976, and
'978.

The Kconfig changes came from Len.  Don is to blame for all the others.
Signed-off-by: NLen Sorensen <lsorense@csclub.uwaterloo.ca>
Signed-off-by: NDon Fry <brazilnut@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Breaking the receive frame processing into two routines for greater clarity.

Tested ia32 and ppc64.
Signed-off-by: NDon Fry <brazilnut@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Move the receive routine and create the transmit routine.

Tested ia32 and ppc64.
Signed-off-by: NDon Fry <brazilnut@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Change some magic numbers to clearer names.  A few whitespace changes.

Tested ia32 and ppc64.
Signed-off-by: NDon Fry <brazilnut@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Delete unnecessary save/restore of rap in interrupt handler and statistics.

tested ia32 and ppc64.
Signed-off-by: NDon Fry <brazilnut@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix a missing call to dma_unmap_single() in the receive path.  Without
this call, errors have been observed on non-cache-coherent systems.

Signed-off-by Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The commit 'e1000: Remove 0x1000 as supported device' (Jeff Kirsher,
673a052f) Removes PIC device ID 8086:1000
from the list of supported devices. A fix was submitted for the original
issue (commit 6a951698).

This commit reverts commit 673a052f and
re-enables 82542rev3 chips completely.
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

One last time..

* 'audit.b29' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  [PATCH] sparc64 audit syscall classes hookup
  [PATCH] syscall class hookup for all normal targets

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Fix CIFS readdir access denied when SE Linux enabled

* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (4608c): Fix I2C dependencies for saa7146 modules
  V4L/DVB (4608b): i2c deps fix on DVB
  V4L/DVB (4605): Fixes an issue with V4L1 and make headers-install
  V4L/DVB (4520): Fix an error when loading bttv driver on PV M4900.
  V4L/DVB (4511): Restore tuner_ymec_tvf66t5_b_dff_pal_ranges[] to fix UHF switch functionality
  V4L/DVB (4494a): Fix compilation when V4L1 support is not present

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: Fix unload oops and memory leak in yealink driver
  usbserial: Reference leak

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6:
  sh64: Add a sane pm_power_off implementation.
  sh64: Use generic BUG_ON()/WARN_ON().
  sh64: Trivial build fixes.
  sh64: Drop deprecated ISA tuning for legacy toolchains.

* git://oss.sgi.com:8090/xfs/xfs-2.6:
  [XFS] Fix a bad pointer dereference in the quota statvfs handling.
  [XFS] Fix xfs_splice_write() so appended data gets to disk.
  [XFS] Fix ABBA deadlock between i_mutex and iolock. Avoid calling
  [XFS] Prevent free space oversubscription and xfssyncd looping.

As long as the descriptor fits on a single cacheline, the change
should be almost free.

Now ring_info is not used at all. Remove it.
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>

Commit 581d708e (oct. 5 2005) introduced
partial Multiqueue support for e1000 which broke macro smartness in setting
up head/tail registers for 82542 rev3 chipsets, making these adapters
completely non-working since 2.6.15.

This commit sets the proper head and tail registers for read and write
descriptor rings. Ths fix was tested on an 82542 rev3 NIC and newer NICs.
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

As I promised last week, here is the first pass at removing all
unnecessary printk's that exist in network device drivers currently in
promiscuous mode.  The duplicate messages are not needed so they have
been removed.  Some of these drivers are quite old and might not need an
update, but I did them all anyway.

I am currently auditing the remaining conditional printk's and will send
out a patch for those soon.
Signed-off-by: NAndy Gospodarek <andy@greyhouse.net>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Merge branch 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream

Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes

This patch fixes a memory leak and a kernel oops when trying to unload
the driver, due to an unbalanced cleanup.
Thanks Ivar Jensen for spotting my mistake.
Signed-off-by: NHenk Vergonet <henk.vergonet@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

A sufficiently-large number of USB serial devices causes a reference leak
when /proc/tty/drivers/usbserial is read.
Signed-Off-By: NMatthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

... that should do it for all targets; the only remaining issues are
mips (currently treated as non-biarch) and handling of other OS
emulations (OSF/SunOS/Solaris/???).  The latter would need to be
assigned new AUDIT_ARCH_... ABI numbers anyway...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Take default arch/*/kernel/audit.c to lib/, have those with special
needs (== biarch) define AUDIT_ARCH in their Kconfig.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

sh64 wasn't providing a sensible pm_power_off(), add one,
and just wrap it to machine_power_off, which already does
the right thing.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

sh64 doesn't need to do anything special for BUG_ON() or
WARN_ON(), use the generic versions.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>