It had changed to be suspend event for BIT6 in DEVT register from
version 2.30a and above. Thus this patch introduces one suspend
event handler to handle the suspend event.
Signed-off-by: NBaolin Wang <baolin.wang@linaro.org>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Implementations might use different IRQs for
host, gadget so use named interrupt resources
to allow device tree to specify the interrupts.

Following are the interrupt names

Peripheral Interrupt - peripheral
HOST Interrupt - host

Maintain backward compatibility for a single named
interrupt ("dwc3_usb3") for all interrupts as well as
unnamed interrupt at index 0 for all interrupts.

As platform_get_irq() variants are used, tackle
the -EPROBE_DEFER case as well.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

It will be crash to stop gadget when the dwc3 device had been into suspend
state, thus we need to check if the dwc3 device had been into suspend state
when UDC try to stop gadget.
Signed-off-by: NBaolin Wang <baolin.wang@linaro.org>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Because of recent changes to transfer handling on
DWC3, we will not get XferComplete unless we
completely fill up our TRB ring. This means that we
might get a Reset or Disconnect without getting a
XferComplete first.

In order to correctly release our allocated Transfer
Resource, we must issue ENDTRANSFER command whenever
dep->resource_index is valid.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

it's clear now that when is_on=true, we must loop
until DWC3_DSTS_DEVCTRLHLT clears; while when
is_on=false we must loop until DWC3_DSTS_DEVCTRLHLT
gets set.

Instead of adding actual if() statements, we can
rely on XOR operation to evaluate to true only when
the above conditions apply. Then, we can move the
break condition back to the while() statement
together with our timeout check and the resulting
code is very compact and simpler to read.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

instead of looping forever and forcing a return if
timeout reaches zero, we can just use timeout and
loop's break condition directly.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

testing shows that udelay() is unnecessary as
controller reaches Halted state almost
instantenously as can be seen by our timeout
variable never actually decrementing.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

'modify' is what the current action is called. Let's
rename it so it matches databook. While at that,
also make sure to add support 'init' action too.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

If we don't, we will overwrite valid TRBs.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Now we can try to issue Update Transfer every time
gadget driver queues a new request. This will make
sure we keep controller's queue busy for as long as
possible.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

We don't need this IRQ anymore for interrupt or bulk
endpoints.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Let's only set LST bit when we run out of space in
our TRB ring. For all other cases, we keep LST bit
unset which will prevent constant allocation and
deallocation of endpoint transfer resources.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Instead of relying on empty list of queued requests,
let's rely on the fact that we have a TRB being
processed right now.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

We will be using this information to change how we
figure out when we need LST bit. For now, just
update our counters.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

According to SNPS databook, we need to pass transfer
resource on update transfer command, let's do it.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

when passing strings to trace, we don't need the
trailing newline character. Trace already appends a
newline character automatically.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Correct the use of the DWC3_DSTS_XXX_SPEED and DWC3_DCFG_XXX_SPEED
macros. The wrong set of macros were being used in a few places.

This is only a cosmetic change as the values for both sets are
identical.
Signed-off-by: NJohn Youn <johnyoun@synopsys.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

From sparse:
warning: cast truncates bits from constant value (100 becomes 0)

The DWC3_TRB_NUM constant is too big for u8. Do the calculation a
slightly different way that should still be optimized out for the case
where DWC3_TRB_NUM == 256.
Signed-off-by: NJohn Youn <johnyoun@synopsys.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

If the trb->enqueue == trb->dequeue, then it could be full or empty.
This could also happen at TRB index 0, so modify the check to handle
that condition. At index 0, the previous TRB is the one just before the
link TRB.
Signed-off-by: NJohn Youn <johnyoun@synopsys.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

The TRBs left calculation didn't account for the link TRB taking up one
spot.

If the trb_dequeue < trb_enqueue, then the result includes the link
TRB slot so it must be adjusted.
Signed-off-by: NJohn Youn <johnyoun@synopsys.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

The current calculation takes dep->trb_dequeue - dep->trb_enqueue to
find the TRB space left.

If you enqueue 1, that results in:
(u8) 0 - (u8) 1 = 0xff = 255 TRBs left.

This is correct if DWC3_TRB_NUM == 256.

If DWC3_TRB_NUM is less than 256 (but still a power of 2) you need to
mod the result by DWC3_TRB_NUM.

For example the same calculation with DWC3_TRB_NUM = 8, results in:
255 % 6 = 7 TRBs left.
Signed-off-by: NJohn Youn <johnyoun@synopsys.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

If trbs_left == 0, we don't have any space left in the TRB ring so don't
prepare anything.
Signed-off-by: NJohn Youn <johnyoun@synopsys.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Clears out all the TRBs in the ring to clean up any stale data that
might be in them from the previous time the endpoint was enabled.

Also removed the existing clear of the LINK trb since the entire ring is
cleard just before.
Signed-off-by: NJohn Youn <johnyoun@synopsys.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Make the skipping of the link TRBS built-in to the increment operation.
This simplifies the code wherever we increment the trb index and ensures
that we never end up pointing to a link trb.
Signed-off-by: NJohn Youn <johnyoun@synopsys.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Cleans up the sparse warning:
warning: dubious: x | !y

Since we do want a bitwise OR here, don't use a logical (true/false)
value. Probably is not a real issue but it cleans up the warning.
Signed-off-by: NJohn Youn <johnyoun@synopsys.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Just like we did for endpoint commands, let's have a
single trace output for the command and its
status. This will improve trace readability
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

We want commands to finish ASAP, so let's remove
that udelay() call.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Just like we did for endpoint commands, let's use a
single return point for generic commands as
well. This aids readability.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

Instead of printing command's status with a separate
trace printout, let's print it within a single call.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

instead of having infinite loop and always checking
timeout value as a break condition, we can just
decrement timeout inside while's condition.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

We don't need the extra %s when command fails.
Let's remove it
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

I really thought this would be useful, but as it
turns out, it creates more problems than fixes. The
amount of times we had to fix this because some
other commit shuffled things around and ended up
regressing this tiny little string manupulation...

Might as well remove it, since it has a negligible
added benefit.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

This will allow us to process several endpoints at a
time by making sure that we lock only shared
resources.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

this patch implements the most basic pm_runtime
support for dwc3. Whenever USB cable is dettached,
then we will allow core to runtime_suspend.

Runtime suspending will involve completely tearing
down event buffers and require a full soft-reset of
the IP.

Note that a further optimization could be
implemented once we decide to support hibernation,
which is to allow runtime_suspend with cable
connected when bus is in U3. That's subject to a
separate patch, however.
Tested-by: NBaolin Wang <baolin.wang@linaro.org>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

when we call dwc3_gadget_giveback(), we end up
releasing our controller's lock. Another thread
could get scheduled and disable the endpoint,
subsequently setting dep->endpoint.desc to NULL.

In that case, we would end up dereferencing a NULL
pointer which would result in a Kernel Oops. Let's
avoid the problem by simply returning early if we
have a NULL descriptor.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

commit f3af3651 ("usb: dwc3: gadget: always
enable IOC on bulk/interrupt transfers") ended up
regressing Isochronous endpoints by clearing
DWC3_EP_BUSY flag too early, which resulted in
choppy audio playback over USB.

Fix that by partially reverting original commit and
making sure that we check for isochronous endpoints.

Fixes: f3af3651 ("usb: dwc3: gadget: always enable IOC
		on bulk/interrupt transfers")
Cc: <stable@vger.kernel.org>
Signed-off-by: NKonrad Leszczynski <konrad.leszczynski@intel.com>
Signed-off-by: NRafal Redzimski <rafal.f.redzimski@intel.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

As a micro-power optimization, let's only resume the
USB2 PHY if we're working on <=HIGHSPEED. If we're
gonna work on SUPERSPEED or SUPERSPEED+, there's no
point in resuming the USB2 PHY.

Fixes: 2b0f11df ("usb: dwc3: gadget: clear SUSPHY bit before ep cmds")
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

by holding gadget's IRQ number in dwc->irq_gadget,
it'll be simpler to free_irq() and disable the IRQ
in case an IRQ fires while we are runtime suspended.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

By adding a pointer to endpoint registers' base
address, we can avoid using our controller-wide
struct dwc3 pointer for everything. At some point
this will allow us to have per-endpoint locks which
will, in turn, let us queue requests to separate
endpoints in parallel.

Because of this change our debugfs interface and io
accessors need to be changed accordingly.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

In all call sites of dwc3_send_gadget_ep_cmd() we
already had a valid dep pointer, so instead of
passing dwc and dep->number, which would be used to
fetch the same pointer we already had, just pass dep
directly.

In other words, we're changing:

	struct dwc3_ep *dep = dwc[dep->number];

to just passing struct dwc3_ep *dep as argument.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>