Put the ctrl reference count at nvme_uninit_ctrl as opposed to
nvme_init_ctrl which takes it. This decrease the reference count at the
core layer instead of decreasing it on each transport separately.
Also move the call of nvme_uninit_ctrl at PCI driver after calling to
nvme_release_prp_pools and nvme_dev_unmap, in order to put the reference
count after using the dev. This is safe because those functions use
nvme_dev which is freed only later at nvme_pci_free_ctrl.
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

In case nvme_sysfs_delete() is called by the user before taking the ctrl
reference count, the ctrl may be freed during the creation and cause the
bug. Take the reference as soon as the controller is externally visible,
which is done by cdev_device_add() in nvme_init_ctrl(). Also take the
reference count at the core layer instead of taking it on each transport
separately.
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

Destroy the resources in the same order like in nvme_probe error flow to
improve code readability.
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

The return code of nvme_delete_ctrl_sync is never used, so change it to
void.
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

Improve code readability.
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

ida instances allocate some internal memory in addition to the base
'struct ida'. Use ida_destroy() to release that memory at module_exit().
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

Currently 32 bit application gets ENOTTY when it calls
compat_ioctl with NVME_IOCTL_SUBMIT_IO in 64 bit kernel.

The cause is that the results of sizeof(struct nvme_user_io),
which is used to define NVME_IOCTL_SUBMIT_IO,
are not same between 32 bit compiler and 64 bit compiler.

* 32 bit: the result of sizeof nvme_user_io is 44.
* 64 bit: the result of sizeof nvme_user_io is 48.

64 bit compiler seems to add 32 bit padding for multiple of 8 bytes.

This patch adds a compat_ioctl handler.
The handler replaces NVME_IOCTL_SUBMIT_IO32 with NVME_IOCTL_SUBMIT_IO
in case 32 bit application calls compat_ioctl for submit in 64 bit kernel.
Then, it calls nvme_ioctl as usual.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMasahiro Yamada (KIOXIA) <masahiro31.yamada@kioxia.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

If we have a 4-byte data digest to send to the wire, but we
have more data to send, set MSG_MORE to tell the stack
that more is coming.
Reviewed-by: NMark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

The nvme multipath error handling defaults to controller reset if the
error is unknown. There are, however, no existing nvme status codes that
indicate a reset should be used, and resetting causes unnecessary
disruption to the rest of IO.

Change nvme's error handling to first check if failover should happen.
If not, let the normal error handling take over rather than reset the
controller.
Based-on-a-patch-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJohn Meneghini <johnm@netapp.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

Current nvmet-rdma code allocates MR pool budget based on queue size,
assuming both host and target use the same "max_pages_per_mr" count.
After limiting the mdts value for RDMA controllers, we know the factor
of maximum MR's per IO operation. Thus, make sure MR pool will be
sufficient for the required IO depth and IO size.

That is, say host's SQ size is 100, then the MR pool budget allocated
currently at target will also be 100 MRs. But 100 IO WRITE Requests
with 256 sg_count(IO size above 1MB) require 200 MRs when target's
"max_pages_per_mr" is 128.
Reported-by: NKrishnamraju Eraparaju <krishna2@chelsio.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>

Set the maximal data transfer size to be 1MB (currently mdts is
unlimited). This will allow calculating the amount of MR's that
one ctrl should allocate to fulfill it's capabilities.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>

Some transports, such as RDMA, would like to set the Maximum Data
Transfer Size (MDTS) according to device/port/ctrl characteristics.
This will enable the transport to set the optimal MDTS according to
controller needs and device capabilities. Add a new nvmet transport
op that is called during ctrl identification. This will not effect
transports that don't implement this option. The return value of the new
op is according to the NVMe spec definition for MDTS.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>

Align PCI address print with fabrics address that is printed with
newline character.

Before:
[root@server40 linux]# cat /sys/class/nvme/nvme2/address
0000:0b:00.0[root@server40 linux]#

After:
[root@server40 linux]# cat /sys/class/nvme/nvme2/address
0000:0b:00.0
[root@server40 linux]#
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>

If we failed to receive data from the socket, don't try
to further process it, we will for sure be handling a queue
error at this point. While no issue was seen with the
current behavior thus far, its safer to cease socket processing
if we detected an error.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

Consolidate the request failure handling code to where
it is being fetched (nvme_tcp_try_send).
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

MAXH2CDATA is not zero based. Also no reason to limit ourselves to
1M transfers as we can do more easily. Make this an arbitrary limit
of 16M.
Reported-by: NWenhua Liu <liuw@vmware.com>
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

Currently, queue io_cpu assignment is done sequentially for default,
read and poll queues based on queue id. This causes miss-alignment between
context of CPU initiating I/O and the I/O worker thread processing
queued requests or completions.

Change to modify queue io_cpu assignment to take into account queue
maps offset. Each queue io_cpu will start at zero for each queue map.
This essentially aligns read/poll queues to start over the same range as
default queues.

Testing performed by Mark with:
- ram device (nvmet)
- single CPU core (pinned)
- 100% 4k reads
- engine io_uring (not using sq_thread option)
- hipri flag set

Micro-benchmark results show a net gain of:
- increase of 18%-29% in IOPs
- reduction of 16%-22% in average latency
- reduction of 7%-23% in 99.99% latency

Baseline:
========
QDepth/Batch	| IOPs [k]	| Avg. Lat [us]	| 99.99% Lat [us]
-----------------------------------------------------------------
1/1 		| 32.4		| 30.11		| 50.94
32/8		| 179		| 168.20	| 371

CPU alignment:
=============
QDepth/Batch	| IOPs [k]	| Avg. Lat [us]	| 99.99% Lat [us]
-----------------------------------------------------------------
1/1 		| 38.5		|   25.18	| 39.16
32/8		| 231		|   130.75	| 343
Reported-by: NMark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

The timeout handler can use the existing nvme_poll() if it needs to
check a polled queue, allowing nvme_poll_irqdisable() to handle only
irq driven queues for the remaining callers.
Signed-off-by: NKeith Busch <kbusch@kernel.org>

Completion handling had been done in two steps: find all new completions
under a lock, then handle those completions outside the lock. This was
done to make the locked section as short as possible so that other
threads using the same lock wait less time.

The driver no longer shares locks during completion, and is in fact
lockless for interrupt driven queues, so the optimization no longer
serves its original purpose. Replace the two-pass completion queue
handler with a single pass that completes entries immediately.
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

The only user for tagged completion was for timeout handling. That user,
though, really only cares if the timed out command is completed, which
we can safely check within the timeout handler.

Remove the tag check to simplify completion handling.
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

Update CQ head with pre-increment operator. This saves subtraction of 1
and a few registers.

Also update phase with "^= 1". This generates only one RMW instruction.

	ffffffff815ba150 <nvme_update_cq_head>:
	ffffffff815ba150:       0f b7 47 70             movzx  eax,WORD PTR [rdi+0x70]
	ffffffff815ba154:       83 c0 01                add    eax,0x1
	ffffffff815ba157:       66 89 47 70             mov    WORD PTR [rdi+0x70],ax
	ffffffff815ba15b:       66 3b 47 68             cmp    ax,WORD PTR [rdi+0x68]
	ffffffff815ba15f:       74 01                   je     ffffffff815ba162 <nvme_update_cq_head+0x12>
	ffffffff815ba161:       c3                      ret
	ffffffff815ba162:       31 c0                   xor    eax,eax
	ffffffff815ba164:       80 77 74 01      ===>   xor    BYTE PTR [rdi+0x74],0x1
	ffffffff815ba168:       66 89 47 70             mov    WORD PTR [rdi+0x70],ax
	ffffffff815ba16c:       c3                      ret

	add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-119 (-119)
	Function                                     old     new   delta
	nvme_poll                                    690     678     -12
	nvme_dev_disable                            1230    1177     -53
	nvme_irq                                     613     559     -54
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>

For set feature command when setting up NVME_FEAT_NUM_QUEUES, check
Number of I/O Completion Queues Requested (NCQR) and Number of I/O
Submission Queues Requested (NSQR) before we proceed, for invalid values
(i.e. 65535) return an appropriate NVMe invalid field status.
Signed-off-by: NAmit Engel <Amit.Engel@dell.com>
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

After initialization, nvme_wait_ready checks for readiness every 100ms,
even though the drive may be ready far sooner than that. This delays
system boot by hundreds of milliseconds. Reduce the delay, checking for
readiness every millisecond instead.

Boot-time tests on an AWS c5.12xlarge:

Before:
[    0.546936] initcall nvme_init+0x0/0x5b returned 0 after 37 usecs
...
[    0.764178] nvme nvme0: 2/0/0 default/read/poll queues
[    0.768424]  nvme0n1: p1
[    0.774132] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
[    0.774146] VFS: Mounted root (ext4 filesystem) on device 259:1.
...
[    0.788141] Run /sbin/init as init process

After:
[    0.537088] initcall nvme_init+0x0/0x5b returned 0 after 37 usecs
...
[    0.543457] nvme nvme0: 2/0/0 default/read/poll queues
[    0.548473]  nvme0n1: p1
[    0.554339] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
[    0.554344] VFS: Mounted root (ext4 filesystem) on device 259:1.
...
[    0.567931] Run /sbin/init as init process
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

Log the controller status to know more about issue if it
lies within kernel nvme subsytem or controller is unhealthy.
Signed-off-by: NRupesh Girase <rgirase@redhat.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulakrni@wdc.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

The function nvme_identify_ns_desc() has 3 levels of nesting which make
error message to exceeded > 80 char per line which is not aligned with
the kernel code standards and rest of the NVMe subsystem code.

Add a helper function to move the processing of the log when the
command is successful by reducing the nesting and keeping the
code < 80 char per line.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

I see no good reason for the "If unsure, say N" advice in the description
of the NVME_HWMON configuration option. It is not dangerous, it does
not select any other option, and has a fairly low overhead.

As the option is already not enabled by default, further suggesting
hesitant users to not enable it is not useful anyway. Unlike some other
options where the description alone may not be sufficient for users to
make a decision, NVME_HWMON is pretty simple to grasp in my opinion,
so just let the user do what they want.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

We allow userspace to connect with a custom hostid which is useful for
certain use-cases. However there is is no way to tell what is the hostid
used to connect to a given controller.

Expose this so userspace can correlate controllers based on hostid.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

We allow userspace to connect with a custom hostnqn which is useful for
certain use-cases. However there is no way to tell what is the hostnqn
used to connect to a given controller.

Expose this so userspace can correlate controllers based on hostnqn.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

Enable ability to associate all sockets related to NVMf TCP traffic
to a priority group that will perform optimized network processing for
this traffic class. Maintain initial default behavior of using priority
of zero.
Signed-off-by: NKiran Patil <kiran.patil@intel.com>
Signed-off-by: NMark Wunderlich <mark.wunderlich@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

Enable ability to associate all sockets related to NVMf TCP traffic
to a priority group that will perform optimized network processing for
this traffic class. Maintain initial default behavior of using priority
of zero.
Signed-off-by: NKiran Patil <kiran.patil@intel.com>
Signed-off-by: NMark Wunderlich <mark.wunderlich@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

For nvmet in configfs.c we check return values for all the sscanf()
calls. Add similar check into the nvmet_subsys_attr_serial_store().
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

This patch adds a new target subsys attribute which allows user to
optionally specify model name which then used in the
nvmet_execute_identify_ctrl() to fill up the nvme_id_ctrl structure.

The default value for the model is set to "Linux" for backward
compatibility.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NMark Ruijter <MRuijter@onestopsystems.com>
[chaitanya.kulkarni@wdc.com
 *Use macro for default model, coding style fixes.
 *Use RCU for accessing model in for configfs and in
  nvmet_execute_identify_ctrl().
]
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

This patch adds a new target subsys attribute which allows user to
optionally specify target controller IDs which then used in the
nvmet_execute_identify_ctrl() to fill up the nvme_id_ctrl structure.

For example, when using a cluster setup with two nodes, with a dual
ported NVMe drive and exporting the drive from both the nodes,
The connection to the host fails due to the same controller ID and
results in the following error message:-

"nvme nvmeX: Duplicate cntlid XXX with nvmeX, rejecting"

With this patch now user can partition the controller IDs for each
subsystem by setting up the cntlid_min and cntlid_max. These values
will be used at the time of the controller ID creation. By partitioning
the ctrl-ids for each subsystem results in the unique ctrl-id space
which avoids the collision.

When new attribute is not specified target will fall back to original
cntlid calculation method.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

This is a pure code cleanup patch which does not change any
functionality. This patch removes the extra lines, get rid of
else which is duplicate for return.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

The return code of nvme_alloc_ns is never used, so change it
to void.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NEdmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

Removing attach_adapter from this driver caused a regression for at
least some machines. Those machines had the sensors described in their
DT, too, so they didn't need manual creation of the sensor devices. The
old code worked, though, because manual creation came first. Creation of
DT devices then failed later and caused error logs, but the sensors
worked nonetheless because of the manually created devices.

When removing attach_adaper, manual creation now comes later and loses
the race. The sensor devices were already registered via DT, yet with
another binding, so the driver could not be bound to it.

This fix refactors the code to remove the race and only manually creates
devices if there are no DT nodes present. Also, the DT binding is updated
to match both, the DT and manually created devices. Because we don't
know which device creation will be used at runtime, the code to start
the kthread is moved to do_probe() which will be called by both methods.

Fixes: 3e7bed52 ("macintosh: therm_windtunnel: drop using attach_adapter")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201723Reported-by: NErhard Furtner <erhard_f@mailbox.org>
Tested-by: NErhard Furtner <erhard_f@mailbox.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org # v4.19+

Add missing ~ to the usage of the mask.
Reported-by: NKevin Benson <Kevin.Benson@zii.aero>
Reported-by: NChris Healy <Chris.Healy@zii.aero>
Fixes: 5c74c54c ("net: dsa: mv88e6xxx: Split monitor port configuration")
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During initialization the driver issues a reset to the device and waits
for 100ms before checking if the firmware is ready. The waiting is
necessary because before that the device is irresponsive and the first
read can result in a completion timeout.

While 100ms is sufficient for Spectrum-1 and Spectrum-2, it is
insufficient for Spectrum-3.

Fix this by increasing the timeout to 200ms.

Fixes: da382875 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC")
Signed-off-by: NAmit Cohen <amitc@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We can't just use the top bits of the last sync event as they could be
off-by-one every 65,536 seconds, giving an error in reconstruction of
65,536 seconds.

This patch uses the difference in the bottom 16 bits (mod 2^16) to
calculate an offset that needs to be applied to the last sync event to
get to the current time.
Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Acked-by: NMartin Habets <mhabets@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>