Changed because old the definition of unsigned long cannot be negative.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Reported-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds accelerometer and temperature sensor support for Macbook 4.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Cc: Nicolas Boichat <nicolas@boichat.ch
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Oops.  Part of the hugetlb private reservation code was not fully
converted to use hstates.

When a huge page must be unmapped from VMAs due to a failed COW,
HPAGE_SIZE is used in the call to unmap_hugepage_range() regardless of
the page size being used.  This works if the VMA is using the default
huge page size.  Otherwise we might unmap too much, too little, or
trigger a BUG_ON.  Rare but serious -- fix it.
Signed-off-by: NAdam Litke <agl@us.ibm.com>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  bnx2: fix poll_controller to pass proper structures and check all rx queues
  niu: Fix readq implementation when architecture does not provide one.
  hostap: pad the skb->cb usage in lieu of a proper fix
  rtl8187 : support for Sitecom WL-168 0001 v4
  mac80211: fix notify_mac function
  rtl8187: Add Abocom USB ID
  net: put_cmsg_compat + SO_TIMESTAMP[NS]: use same name for value as caller
  tcp_htcp: last_cong bug fix
  [netdrvr] smc911x: fix for driver resume (and compilation warning)
  RDMA/cxgb3: deadlock in iw_cxgb3 can cause hang when configuring interface.
  cxgb3 - Limit multiqueue setting to msi-x
  cxgb3 - eeprom read fixes
  myri10ge: fix stop/go ordering even more

Fix bnx2 so that netpoll works properly.  Specifically:

1) Fix parameters to bnx2_interrupt to be a struct bnx2_napi rather than a
struct net_device

2) Fix poll_controller method to check every queue in the rx case so frames
aren't missed
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes a TX hang reported by Jesper Dangaard Brouer.

When an architecutre cannot provide a fully functional
64-bit atomic readq/writeq, the driver must implement
it's own.  This is because only the driver can say whether
doing something like using two 32-bit reads to implement
the full 64-bit read will actually work properly.

In particular one of the issues is whether the top 32-bits
or the bottom 32-bits of the 64-bit register should be read
first.  There could be side effects, and in fact that is
exactly the problem here.

The TX_CS register has counters in the upper 32-bits and
state bits in the lower 32-bits.  A read clears the state
bits.

We would read the counter half before the state bit half.
That first read would clear the state bits, and then the
driver thinks that no interrupts are pending because the
interrupt indication state bits are seen clear every time.

Fix this by reading the bottom half before the upper half.
Tested-by: NJesper Dangaard Brouer <jdb@comx.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Like mac80211 did, this driver makes 'clever' use of skb->cb to pass
information along with an skb as it is requeued from the virtual device
to the physical wireless device.  Unfortunately, that trick no longer
works...

Unlike mac80211, code complexity and driver apathy makes this hack
the best option we have in the short run.  Hopefully someone will
eventually be motivated to code a proper fix before all the effected
hardware dies.

(Above text by me.  Johannes officially disavows all knowledge of this
hack. -- JWL)
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Cc: stable@kernel.org
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

the Sitecom 0001 v4 with product id 0x0df6:0028, uses Realtek's
RTL8187B and work fine with new 2.6.27 driver.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The ieee80211_notify_mac() function uses ieee80211_sta_req_auth() which
in turn calls ieee80211_set_disassoc() which calls a few functions that
need to be able to sleep, so ieee80211_notify_mac() cannot use RCU
locking for the interface list and must use rtnl locking instead.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NIvan Kuten <ivan.kuten@promwad.com>
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimer: clean up unused callback modes

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  dmaengine: struct device - replace bus_id with dev_name(), dev_set_name()
  iop-adma: use iop_paranoia() for debug BUG_ONs
  iop-adma: add a dummy read to flush next descriptor update

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IPoIB: Fix crash in path_rec_completion()
  IPoIB: Fix hang in ipoib_flush_paths()
  IPoIB: Don't enable NAPI when it's already enabled
  RDMA/cxgb3: Fix deadlock in iw_cxgb3 (hang when configuring interface)
  IB/ehca: Remove reference to special QP in case of port activation failure
  IB/mlx4: Set umem field to NULL in mlx4_ib_alloc_fast_reg_mr()
  mlx4_core: Fix unused variable warning
  RDMA/nes: Mitigate compatibility issue regarding PCIe write credits
  RDMA/nes: Fix CQ allocation scheme for multicast receive queue apps
  RDMA/nes: Correct handling of PBL resources
  RDMA/nes: Reindent mis-indented spinlocks
  RDMA/cxgb3: Fix too-big reserved field zeroing in iwch_post_zb_read()
  IB/ipath: Fix RDMA write with immediate copy of last packet

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Fix IDT/STAC multiple HP detection
  ALSA: hda - Fix input pin initialization for STAC/IDT codecs
  ALSA: hda - Add missing analog-mux mixer creation for STAC9200

Don't do misalignment handling for userspace misalignment faults: just
generate an appropriate SIGBUS instead.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Don't handle the misaligned loading and storing of the SP register as in C code
that's most certainly a compiler bug.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Support misalignment handling for instructions that have kernel SP-based
address operands, including fixing those that include IMM8 or IMM16
displacements.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix misalignment handling for an address calculated from the sum of two
registers.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Correctly handle misalignment in MOV instructions with postinc-with-immediate
addressing mode operands.  In these, the immediate value is the increment to
be applied the address register, not the displacement to the address.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Perform misalignment fixups of the MOV_Lcc instructions (move postinc memory
to register and conditionally loop).
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allow misalignment fixup in interrupt handling in the MN10300 arch.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix misalignment handling of operands with register postincrement addressing.
The flag to indicate that postincrement is required should not be interpreted
as an specification of a value to be added to the address.

Also add BUGs to catch unimplemented parameter markings in the opcodes table.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Extract the displacement from an MN10300 instruction correctly in the
misalignment fixup handler.

The code should extract the displacement in LSB order, not MSB order.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add further misalignment fixup support to the MN10300 arch, notably for ABS32
and SP+disp addressing.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add configurable built-in testing for the MN10300 misalignment handler.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Clean up the MN10300 misalignment handler a little by:

 (1) Use ilog2() rather than doing implementing log2() locally.

 (2) Make format_tbl[] const and static.

 (3) Making the debugging prints more consistent.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'kvm-updates/2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
  KVM: Fix pit memory leak if unable to allocate irq source id
  KVM: ia64: fix vmm_spin_{un}lock for !CONFIG_SMP
  KVM: VMX: Set IGMT bit in EPT entry
  KVM: Require the PCI subsystem
  x86: KVM guest: fix section mismatch warning in kvmclock.c
  KVM: ia64: Use guest signal mask when blocking
  KVM: MMU: increase per-vcpu rmap cache alloc size

The STACK_GROWSUP case of stack expansion was missing a test for 'prev',
which got removed by commit cb8f488c
("mmap.c: deinline a few functions") by mistake.

I found my original email in "sent" folder. The patch in that mail
does NOT remove !prev. That change had beed added by someone else.

Ok, I think we are not much interested in who did it, let's
fix it for good.

[ "It looks like this was caused by me fixing rejects.  That was the
  fancy include-lots-of-context-so-it-wont-apply patch." - akpm ]
Reported-and-bisected-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (47 commits)
  ACPI: pci_link: remove acpi_irq_balance_set() interface
  fujitsu-laptop: Add DMI callback for Lifebook S6420
  ACPI: EC: Don't do transaction from GPE handler in poll mode.
  ACPI: EC: lower interrupt storm treshold
  ACPICA: Use spinlock for acpi_{en|dis}able_gpe
  ACPI: EC: restart failed command
  ACPI: EC: wait for last write gpe
  ACPI: EC: make kernel messages more useful when GPE storm is detected
  ACPI: EC: revert msleep patch
  thinkpad_acpi: fingers off backlight if video.ko is serving this functionality
  sony-laptop: fingers off backlight if video.ko is serving this functionality
  msi-laptop: fingers off backlight if video.ko is serving this functionality
  fujitsu-laptop: fingers off backlight if video.ko is serving this functionality
  eeepc-laptop: fingers off backlight if video.ko is serving this functionality
  compal: fingers off backlight if video.ko is serving this functionality
  asus-acpi: fingers off backlight if video.ko is serving this functionality
  Acer-WMI: fingers off backlight if video.ko is serving this functionality
  ACPI video: if no ACPI backlight support, use vendor drivers
  ACPI: video: Ignore devices that aren't present in hardware
  Delete an unwanted return statement at evgpe.c
  ...

Fix a crash in path_rec_completion() during an SM up/down loop.  If
more than one path record request is issued, the first completion
releases path->done, allowing ipoib_flush_paths() to free the path,
and thus corrupting it for the second completion.

Commit ee1e2c82 ("IPoIB: Refresh paths instead of flushing them on SM
change events") added the field path->valid and changed the test "if
(!path)" to "if (!path || !path->valid)".  This change made it
possible for a path with an outstanding query to pass the test and
issue another query on the same path.  Having two queries on the same
path leads to a crash.

This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1325>.
Signed-off-by: NYossi Etigin <yosefe@voltaire.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

ipoib_flush_paths() can hang during an SM up/down loop: if
path_rec_start() fails (for instance, because there is no sm_ah), the
path is still added to the path list by neigh_add_path().  Then,
ipoib_flush_paths() will wait for path->done, but it will never
complete because the request was not issued at all.  Fix this by
completing path->done if issuing the query fails.

This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1329>.
Signed-off-by: NYossi Etigin <yosefe@voltaire.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

If a P_Key is not present when an interface is created, ipoib_open()
will return after doing napi_enable().  ipoib_open() will be called
again from ipoib_pkey_poll() when the P_Key appears, after NAPI has
already been enabled, and try to enable it again. This triggers a
BUG_ON() in napi_enable().

Fix this by moving the call to napi_enable() to after the test for
P_Key presence.
Signed-off-by: NYossi Etigin <yosefe@voltaire.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

When the iw_cxgb3 module's cxgb3_client "add" func gets called by the
cxgb3 module, the iwarp driver ends up calling the ethtool ops
get_drvinfo function in cxgb3 to get the fw version and other info.
Currently the iwarp driver grabs the rtnl lock around this down call
to serialize.  As of 2.6.27 or so, things changed such that the rtnl
lock is held around the call to the netdev driver open function.  Also
the cxgb3_client "add" function doesn't get called if the device is
down.

So, if you load cxgb3, then load iw_cxgb3, then ifconfig up the
device, the iw_cxgb3 add func gets called with the rtnl_lock held.  If
you load cxgb3, ifconfig up the device, then load iw_cxgb3, the add
func gets called without the rtnl_lock held.  The former causes the
deadlock, the latter does not.

In addition, there are iw_cxgb3 sysfs handlers that also can call down
into cxgb3 to gather the fw and hw versions.  These can be called
concurrently on different processors and at any time.  Thus we need to
push this serialization down in the cxgb3 driver get_drvinfo func.

The fix is to remove rtnl lock usage, and use a per-device lock in cxgb3.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Acked-by: NDivy Le Ray <divy@chelsio.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

In __sock_recv_timestamp() the additional SCM_TIMESTAMP[NS] is used. This
has the same value as SO_TIMESTAMP[NS], so this is a purely cosmetic change.
Signed-off-by: NPatrick Ohly <patrick.ohly@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes a minor bug in tcp_htcp.c which has been
highlighted by Lachlan Andrew and Lawrence Stewart.  Currently, the
time since the last congestion event, which is stored in variable
last_cong, is reset whenever there is a state change into
TCP_CA_Open.  This includes transitions of the type
TCP_CA_Open->TCP_CA_Disorder->TCP_CA_Open which are not associated
with backoff of cwnd.  The patch changes last_cong to be updated
only on transitions into TCP_CA_Open that occur after experiencing
the congestion-related states TCP_CA_Loss, TCP_CA_Recovery,
TCP_CA_CWR.
Signed-off-by: NDoug Leith <doug.leith@nuim.ie>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Due to the recent change for multiple HP as line-out switch, only
one of the multiple headphons (usually a wrong one) is toggled
and the other pins are still disabled.  This causes the silent output
problem on some Dell laptops.

Also, the hp_switch check is screwed up when a line-in or a mic-in
jack exists.  This is added as an additional output, but hp_switch
check doesn't take it into account.

This patch fixes these issues: simplify hp_switch check by using
the NID instead of bool, and clean up / fix the toggle of HP pins
in unsol event handler code.

Reference: Novell bnc#443267
	https://bugzilla.novell.com/show_bug.cgi?id=443267Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Impact: cleanup

git grep HRTIMER_CB_IRQSAFE revealed half the callback modes are actually
unused.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>