Examples of misuse are

3112 info->init_error = -1;

4440 if ((info->init_error = register_test(info)) < 0) {
Signed-off-by: NDarren Jenkins <darrenrjenkins@gmail.com>
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NPaul Fulghum <paulkf@microgate.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Under some circumstances `points' can get printed before it's initialised.
Spotted by Carlos Martin <carlos@cmartin.tk>.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds mm->task_size to keep track of the task size of a given mm
and uses that to fix the powerpc vdso so that it uses the mm task size to
decide what pages to fault in instead of the current thread flags (which
broke when ptracing).

(akpm: I expect that mm_struct.task_size will become the way in which we
finally sort out the confusion between 32-bit processes and 32-bit mm's.  It
may need tweaks, but at this stage this patch is powerpc-only.)
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix oprofile linkage.   Pointed out by "Luke Yang" <luke.adi@gmail.com>.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

remove_from_swap() currently attempts to use page_lock_anon_vma to obtain
an anon_vma lock.  That is not working since the page may have been
remapped via swap ptes in order to move the page.

However, do_migrate_pages() obtain the mmap_sem lock and therefore there is
a guarantee that the anonymous vma will not vanish from under us.  There is
therefore no need to use page_lock_anon_vma.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Acked-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Comment out debug code in tty receive buffering.  For performance reasons
(I'll keep it enabled in -mm).
Signed-off-by: NPaul Fulghum <paulkf@microgate.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Ben Collins <bcollins@debian.org>
Cc: Jody McIntyre <scjody@modernduck.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is Adam's pnp probing fix.  It's been reported to fix hangs on several
people's machines.  I don't know if it's official or final, and Adam isn't
contactable at present.  But I'm not aware of the patch causing any
regressions.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some "inline" removing that Andrew suggested, removed some locking on
add/remove at this level - we'll let the callees decide.
Signed-off-by: NPatrick Gefre <pfg@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The RedBoot boot loader writes flash partition tables containing native
byte sex 32 bit values.  When booting an opposite byte sex kernel (e.g.  an
LE kernel from BE RedBoot) the current MTD driver fails to handle the
partition table and therefore is unable to generate the correct partition
map for the flash.

So far as I am aware this problem is ARM specific, because only ARM
supports software change of the CPU (memory system) byte sex, however the
partition table parsing is in generic MTD code.  The patch below has been
tested on NSLU2 (an IXP4XX based system) with a patch,
10-ixp4xx-copy-from.patch (submitted to linux-arm-kernel - it's ARM
specific) required to make the maps/ixp4xx.c driver work with an LE kernel.

Builds of the patched system are in the 'unstable' release of OpenSlug and
UcSlugC available from www.nslu2-linux.org.  These builds are BE, the
archives at www.nslu2-linux.org and www.handhelds.org (see
monotone.vanille.de) can be built LE (currently DISTRO targets
nslu-ltu.conf for LE thumb uclibc (32 bit kernel) and nslu2-lau.conf,
nslu2-lag.conf for LE arm uclibc/glibc) and this patch has been tested
extensively will both BE and LE systems on the NSLU2 (including swapping
between BE and LE by reflashing from both RedBoot and Linux).

The patch recognises that the FIS directory (the partition table) is
byte-reversed by examining the partition table size, which is known to be
one erase block (this is an assumption made elsewhere in redboot.c).  If
the size matches the erase block after byte swapping the value then
byte-reversal is assumed, if not no further action is taken.  The patched
code is fail safe; should redboot.c be changed to support a partition table
with a modified size field the test will fail and the partition table will
be assumed to have the host byte sex.

If byte-reversal is detected the patch byte swaps the remainder of the 32
bit fields in the copy of the table; this copy is then used to set up the
MTD partition map.
Signed-off-by: NJohn Bowler <jbowler@acm.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If negative entries (nodeid == 0) were sent in reply to LOOKUP requests,
two bugs could be triggered:

- looking up a negative entry would return -EIO,

- revaildate on an entry which turned negative would send a FORGET
  request with zero nodeid, which would cause an abort() in the
  library.

The above would only happen if the 'negative_timeout=N' option was used,
otherwise lookups reply -ENOENT, which worked correctly.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently sys_migrate_pages only moves pages belonging to a process.  This
is okay when invoked from a regular user.  But if invoked from root it
should move all pages as documented in the migrate_pages manpage.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This driver loops over 'num_online_cpus', but it doesn't account for holes
in the online map created by offlined cpus, and assumes that the cpu
numbers stay linear.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove Message Signaled Interrupt support (for 2.6.16).
MSI is inherently edge-triggered and that is incompatiable (without more
work) with NAPI.

In future, will replace with smarter lockless-IRQ handling like
tg3.c
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6

This patch adds a bunch of new device IDs to the ftdi_sio driver for
various devices from microHAM using FTDI chips.

Micheal Studer supplied the PID for the USB-Y9 device.  I examined the
INF file in microHAM's Windows driver package for the USB-KW, USB-YS,
USB-IC, USB-DB9 and USB-RS232 devices.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Added the USB vendorID of GSPDA and the productID of GSPDA's palm
smartphone 'xplore m68' to the list of known devices.
Signed-off-by: NHendrik Schweppe <linuxkpatch@hendrik.fam-schweppe.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remote NDIS response to OID_GEN_SUPPORTED_LIST only allocated space
for the data attached to the reply, and not the reply structure
itself. This caused other kmalloc'd memory to be corrupted.
Signed-off-by: NShaun Tancheff <shaun@tancheff.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

There is a dead lock in lh7a40x udc driver. When the driver receive a
SET_FEATURE HALT request, the dev lock is taken by the interrupt
handler lh7a40x_udc_irq then the handler will call lh7a40x_set_halt
function which in its turn will try to acquire the dev lock.
Signed-off-by: NFranck Bui-Huu <franck.bui-huu@innova-card.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as656) adds an unusual_devs.h entry for the Lyra RCA RD1080
MP3 player.  Its card-reader firmware has the common
report-one-too-many-sectors bug.  This fixes Novell bug #152175.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch is for the Dual USB Joypad [0925:8866] from Wisegroup.  The
HID_QUIRK_NOGET is necessary for it to respond to input, and the
HID_QUIRK_MULTI_INPUT is necessary to have two js# nodes appear.
Signed-off-by: NAndrew Fuller <mactalla.obair@gmail.com>
Cc: "Dmitry Torokhov" <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix http://bugzilla.kernel.org/show_bug.cgi?id=6128

Finish morphing the "early handoff" version of the EHCI BIOS handshake over
to match the previous implementation inside the EHCI driver (except that
now we forcibly disable the SMI).  The version that had been with the PCI
code was surprisingly full of bugs.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: <yazar256@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The caller takes the UART port lock, so we shouldn't try
to take it again.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow sysadmin to disable all warnings about userland apps
making unaligned accesses by using:
 # echo 1 > /proc/sys/kernel/ignore-unaligned-usertrap
Rather than having to use prctl on a process by process basis.

Default behaivour leaves the warnings enabled.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

- change interface of the reset functions from Scsi_Cmnd to Scsi_Host.
- add functions with the original interface and rename the new
  functions to reflect the new interface.
- call these from the pcmcia driver, thereby avoiding the need to
  construct a (broken) Scsi_Cmnd from a Scsi_Host.
- just run the bh if the interrupt is from the controller and if so
  ensure that it's only called once per interrupt.
Signed-off-by: NJuergen E. Fischer <fischer@linux-buechse.de>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
When a CPU has no scache, the scache flushing functions currently
aren't getting initialized and the NULL pointer is eventually called
as a function.  Initialize the scache flushing functions as a noop
when there's no scache.
    
Initial patch by me and most of the debugging done by Martin Michlmayr.
Signed-off-by: NMartin Michlmayr <tbm@cyrius.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

beautify coding style for zeroing end of fsyscall_table entries.
Remove misleading __NR_syscall_last and add more comments.
Drop (now unneeded) "guard against failure to increase NR_syscalls"
Signed-off-by: NKen Chen <kenneth.w.chen@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

sym2 boards without NVRAM currently negotiate narrow due to this missed
initialisation
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Stuborn as compilers are they don't like duplicate definitions.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

During testing of SLES10, we encountered a hang in the CFQ io scheduler.
Turns out the deferred slice expiry logic is buggy, so remove that for
now.  We could be left with an idle queue that would never wake up.  So
kill that logic, always expire immediately.  Also fix a potential timer
race condition.

Patch looks bigger than it is, because it moves a function.
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Before the merge I updated create_pte_mapping() to work for iSeries, by
calling iSeries_hpte_bolt_or_insert. (4c55130b)

Later we changed iSeries_hpte_insert to cope with the bolting case, and called
that instead from create_pte_mapping() (which was renamed to htab_bolt_mapping)
(3c726f8d).

Unfortunately that change introduced a subtle bug, where we pass an absolute
address to iSeries_hpte_insert() where it expects a physical address. This
leads to us calling phys_to_abs() twice on the physical address, which is
seriously bogus.

This only causes a problem if the absolute address from the first translation
can be looked up again in the chunk_map, which depends on the size and layout
of memory. I've seen it fail on one box, but not others.

The minimal fix is to pass the physical address to iSeries_hpte_insert(). For
2.6.17 we should make phys_to_abs() BUG if we try to double-translate an
address.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch fixes a crash in handle_eeh_events,
but ethtool -t still doesnt work right.

...
pepino:~ # cpu 0x3: Vector: 300 (Data Access) at [c00000005192bbe0]
    pc: c00000000004a380: .handle_eeh_events+0xe0/0x23c
    lr: c00000000004a374: .handle_eeh_events+0xd4/0x23c
    sp: c00000005192be60
   msr: 9000000000009032
   dar: 268
 dsisr: 40000000
  current = 0xc0000001fe7bf1a0
  paca    = 0xc00000000048b280
    pid   = 16322, comm = eehd
enter ? for help
[c00000005192bf00] c00000000004a808 .eeh_event_handler+0xcc/0x130
[c00000005192bf90] c000000000025e00 .kernel_thread+0x4c/0x68

...

(none):/# /usr/sbin/ethtool -i eth0
driver: e100
version: 3.5.10-k2-NAPI
firmware-version: N/A
bus-info: 0000:21:01.0
(none):/# /usr/sbin/ethtool -t eth0
Call Trace:
[C00000000F8DEFF0] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable)
[C00000000F8DF0A0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8
[C00000000F8DF150] [C000000000049E58] .eeh_check_failure+0x10c/0x138
[C00000000F8DF1E0] [C0000000002DFDB0] .e100_hw_reset+0x70/0xf4
[C00000000F8DF270] [C0000000002E1BBC] .e100_hw_init+0x2c/0x260
[C00000000F8DF310] [C0000000002E2464] .e100_loopback_test+0x8c/0x220
[C00000000F8DF3C0] [C0000000002E28DC] .e100_diag_test+0xdc/0x16c
[C00000000F8DF490] [C000000000420BE0] .dev_ethtool+0xf24/0x14f8
[C00000000F8DF8F0] [C00000000041F4A8] .dev_ioctl+0x5cc/0x740
[C00000000F8DFA20] [C00000000040FEFC] .sock_ioctl+0x3d0/0x404
[C00000000F8DFAC0] [C0000000000D513C] .do_ioctl+0x68/0x108
[C00000000F8DFB50] [C0000000000D56B0] .vfs_ioctl+0x4d4/0x510
[C00000000F8DFC10] [C0000000000D5740] .sys_ioctl+0x54/0x94
[C00000000F8DFCC0] [C0000000000FB6EC] .ethtool_ioctl+0x11c/0x150
[C00000000F8DFD60] [C0000000000F7E40] .compat_sys_ioctl+0x338/0x3bc
[C00000000F8DFE30] [C00000000000871C] syscall_exit+0x0/0x40
EEH: Detected PCI bus error on device 0000:21:01.0
EEH: This PCI device has failed 1 times since last reboot: <NULL> -

modprobe: FATAL: Could not load /lib/modules/2.6.16-rc4-git7/modules.dep: No such file or directory

Cannot get strings: No such device
(none):/#
(none):/# EEH: Unable to configure device bridge (-3) for /pci@400000000110/pci@2,2

(none):/# Call Trace:
[C00000000FA17940] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable)
[C00000000FA179F0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8
[C00000000FA17AA0] [C00000000001E114] .rtas_read_config+0x120/0x154
[C00000000FA17B40] [C000000000049664] .early_enable_eeh+0x274/0x2bc
[C00000000FA17C00] [C000000000049708] .eeh_add_device_early+0x5c/0x6c
[C00000000FA17C90] [C000000000049748] .eeh_add_device_tree_early+0x30/0x5c
[C00000000FA17D20] [C000000000046568] .pcibios_add_pci_devices+0x8c/0x1f8
[C00000000FA17DD0] [C00000000004A528] .eeh_reset_device+0xe0/0x110
[C00000000FA17E60] [C00000000004A698] .handle_eeh_events+0x140/0x250
[C00000000FA17F00] [C00000000004AC7C] .eeh_event_handler+0xe8/0x140
[C00000000FA17F90] [C000000000025784] .kernel_thread+0x4c/0x68
EEH: Detected PCI bus error on device <NULL>
EEH: This PCI device has failed 1 times since last reboot: <NULL> -
EEH: Unable to configure device bridge (-3) for /pci@400000000110/pci@2,2
Call Trace:
[C00000000FA17940] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable)
[C00000000FA179F0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8
[C00000000FA17AA0] [C00000000001E114] .rtas_read_config+0x120/0x154
[C00000000FA17B40] [C000000000049664] .early_enable_eeh+0x274/0x2bc
[C00000000FA17C00] [C000000000049708] .eeh_add_device_early+0x5c/0x6c
[C00000000FA17C90] [C000000000049748] .eeh_add_device_tree_early+0x30/0x5c
[C00000000FA17D20] [C000000000046568] .pcibios_add_pci_devices+0x8c/0x1f8
[C00000000FA17DD0] [C00000000004A528] .eeh_reset_device+0xe0/0x110
[C00000000FA17E60] [C00000000004A698] .handle_eeh_events+0x140/0x250
[C00000000FA17F00] [C00000000004AC7C] .eeh_event_handler+0xe8/0x140
[C00000000FA17F90] [C000000000025784] .kernel_thread+0x4c/0x68
EEH: Detected PCI bus error on device <NULL>
EEH: This PCI device has failed 1 times since last reboot: <NULL> -
EEH: Unable to configure device bridge (-3) for /pci@400000000110/pci@2,2
Call Trace:
[C00000000FA17940] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable)
[C00000000FA179F0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8
[C00000000FA17AA0] [C00000000001E114] .rtas_read_config+0x120/0x154
[C00000000FA17B40] [C000000000049664] .early_enable_eeh+0x274/0x2bc
[C00000000FA17C00] [C000000000049708] .eeh_add_device_early+0x5c/0x6c
[C00000000FA17C90] [C000000000049748] .eeh_add_device_tree_early+0x30/0x5c
[C00000000FA17D20] [C000000000046568] .pcibios_add_pci_devices+0x8c/0x1f8
[C00000000FA17DD0] [C00000000004A528] .eeh_reset_device+0xe0/0x110
[C00000000FA17E60] [C00000000004A698] .handle_eeh_events+0x140/0x250
[C00000000FA17F00] [C00000000004AC7C] .eeh_event_handler+0xe8/0x140
[C00000000FA17F90] [C000000000025784] .kernel_thread+0x4c/0x68
EEH: Detected PCI bus error on device <NULL>
and so on
Signed-off-by: NOlaf Hering <olh@suse.de>
Acked-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>