The commit c62ebb3d ("i2c: designware: Add support for an interface clock")
introduced an optional clock while missed correct error handling.
assert reset line back if error happen at ->probe().

Fixes: c62ebb3d ("i2c: designware: Add support for an interface clock")
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Static structure tsl2550_info, of type i2c_board_info, is referenced
only twice: the first time in arguments to dev_info() (which does not
modify it) and the second time as the last argument to function
i2c_new_device() (where the corresponding parameter is declared as
const). As tsl2550_info is therefore never modified, make it const to
protect it from unintended modifications.
Issue found with Coccinelle.
Signed-off-by: NNishka Dasgupta <nishkadg.linux@gmail.com>
Reviewed-by: NJean Delvare <jdelvare@suse.de>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Add support for Intel(R) Programmable Services Engine (Intel(R) PSE) I2C
controller in Intel Elkhart Lake when interface is assigned to the host
processor.
Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Some devices support MSI interrupts. Let's at least try to use them in
platforms that provide MSI capability.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

This device contains both master and slave controllers which can be
enabled simultaneously. Both controllers share the same SDA/SCL lines
and interrupt source but has separate control and status registers.
Controllers also works in loopback mode - slave device can communicate
with its own master controller internally. The controller can handle up
to two addresses, both of which may be 10 bit. Most of the logic
(sending (N)ACK, handling repeated start or switching between
write/read) is handled automatically which makes working with this
controller quite easy.

For simplicity, this patch adds basic support, limiting to only one
slave address. Support for the 2nd device may be added in the future.

Note that synchronize_irq() is used to ensure any running slave interrupt
is finished to make sure slave i2c_client structure can be safely used
by i2c_slave_event.
Signed-off-by: NKrzysztof Adamski <krzysztof.adamski@nokia.com>
Reviewed-by: NAlexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Since the 2019 a1k.org community re-print of these PCBs sports an
LTC2990 hwmon chip as an example use case, let this driver autoprobe
for that as well. If it is present, modprobing ltc2990 is sufficient.

The property_entry enables the three additional inputs available on
this particular board:

  in1 will be the voltage of the 5V rail, divided by 2.
  in2 will be the voltage of the 12V rail, divided by 4.
  temp3 will be measured using a PCB loop next the chip.
Signed-off-by: NMax Staudt <max@enpas.org>
Reviewed-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

This is the i2c-icy driver for the ICY board for Amiga computers.
It connects a PCF8584 I2C controller to the Zorro bus, providing I2C
connectivity. The original documentation can be found on Aminet:

https://aminet.net/package/docs/hard/icy

IRQ support is currently not implemented, as i2c-algo-pcf is built for
the ISA bus and a straight implementation of the same stack locks up a
Zorro machine.
Signed-off-by: NMax Staudt <max@enpas.org>
Reviewed-by: NGeert Uytterhoeven <geert@linux-m68k.org>
[wsa: added a missing newline reported by checkpatch]
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Inspired by Lori Hikichi's patch for iproc, this adds the full name of
the devicetree node to the adapter name. With the introduction of
BCM2711 it's very difficult to distinguish between the multiple instances.
Signed-off-by: NStefan Wahren <wahrenst@gmx.net>
Acked-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

The I2C block on the BCM2711 isn't affected by the clk stretching bug.
So there is no need to apply the corresponding quirk.
Signed-off-by: NStefan Wahren <wahrenst@gmx.net>
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Add a new compatible for the BCM2711, which hasn't the clock stretch bug.
Signed-off-by: NStefan Wahren <wahrenst@gmx.net>
Reviewed-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

When the kernel is build with lockdep support and the i2c-cht-wc driver is
used, the following warning is shown:

[   66.674334] ======================================================
[   66.674337] WARNING: possible circular locking dependency detected
[   66.674340] 5.3.0-rc4+ #83 Not tainted
[   66.674342] ------------------------------------------------------
[   66.674345] systemd-udevd/1232 is trying to acquire lock:
[   66.674349] 00000000a74dab07 (intel_soc_pmic_chtwc:167:(&cht_wc_regmap_cfg)->lock){+.+.}, at: regmap_write+0x31/0x70
[   66.674360]
               but task is already holding lock:
[   66.674362] 00000000d44a85b7 (i2c_register_adapter){+.+.}, at: i2c_smbus_xfer+0x49/0xf0
[   66.674370]
               which lock already depends on the new lock.

[   66.674371]
               the existing dependency chain (in reverse order) is:
[   66.674374]
               -> #1 (i2c_register_adapter){+.+.}:
[   66.674381]        rt_mutex_lock_nested+0x46/0x60
[   66.674384]        i2c_smbus_xfer+0x49/0xf0
[   66.674387]        i2c_smbus_read_byte_data+0x45/0x70
[   66.674391]        cht_wc_byte_reg_read+0x35/0x50
[   66.674394]        _regmap_read+0x63/0x1a0
[   66.674396]        _regmap_update_bits+0xa8/0xe0
[   66.674399]        regmap_update_bits_base+0x63/0xa0
[   66.674403]        regmap_irq_update_bits.isra.0+0x3b/0x50
[   66.674406]        regmap_add_irq_chip+0x592/0x7a0
[   66.674409]        devm_regmap_add_irq_chip+0x89/0xed
[   66.674412]        cht_wc_probe+0x102/0x158
[   66.674415]        i2c_device_probe+0x95/0x250
[   66.674419]        really_probe+0xf3/0x380
[   66.674422]        driver_probe_device+0x59/0xd0
[   66.674425]        device_driver_attach+0x53/0x60
[   66.674428]        __driver_attach+0x92/0x150
[   66.674431]        bus_for_each_dev+0x7d/0xc0
[   66.674434]        bus_add_driver+0x14d/0x1f0
[   66.674437]        driver_register+0x6d/0xb0
[   66.674440]        i2c_register_driver+0x45/0x80
[   66.674445]        do_one_initcall+0x60/0x2f4
[   66.674450]        kernel_init_freeable+0x20d/0x2b4
[   66.674453]        kernel_init+0xa/0x10c
[   66.674457]        ret_from_fork+0x3a/0x50
[   66.674459]
               -> #0 (intel_soc_pmic_chtwc:167:(&cht_wc_regmap_cfg)->lock){+.+.}:
[   66.674465]        __lock_acquire+0xe07/0x1930
[   66.674468]        lock_acquire+0x9d/0x1a0
[   66.674472]        __mutex_lock+0xa8/0x9a0
[   66.674474]        regmap_write+0x31/0x70
[   66.674480]        cht_wc_i2c_adap_smbus_xfer+0x72/0x240 [i2c_cht_wc]
[   66.674483]        __i2c_smbus_xfer+0x1a3/0x640
[   66.674486]        i2c_smbus_xfer+0x67/0xf0
[   66.674489]        i2c_smbus_read_byte_data+0x45/0x70
[   66.674494]        bq24190_probe+0x26b/0x410 [bq24190_charger]
[   66.674497]        i2c_device_probe+0x189/0x250
[   66.674500]        really_probe+0xf3/0x380
[   66.674503]        driver_probe_device+0x59/0xd0
[   66.674506]        device_driver_attach+0x53/0x60
[   66.674509]        __driver_attach+0x92/0x150
[   66.674512]        bus_for_each_dev+0x7d/0xc0
[   66.674515]        bus_add_driver+0x14d/0x1f0
[   66.674518]        driver_register+0x6d/0xb0
[   66.674521]        i2c_register_driver+0x45/0x80
[   66.674524]        do_one_initcall+0x60/0x2f4
[   66.674528]        do_init_module+0x5c/0x230
[   66.674531]        load_module+0x2707/0x2a20
[   66.674534]        __do_sys_init_module+0x188/0x1b0
[   66.674537]        do_syscall_64+0x5c/0xb0
[   66.674541]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   66.674543]
               other info that might help us debug this:

[   66.674545]  Possible unsafe locking scenario:

[   66.674547]        CPU0                    CPU1
[   66.674548]        ----                    ----
[   66.674550]   lock(i2c_register_adapter);
[   66.674553]                                lock(intel_soc_pmic_chtwc:167:(&cht_wc_regmap_cfg)->lock);
[   66.674556]                                lock(i2c_register_adapter);
[   66.674559]   lock(intel_soc_pmic_chtwc:167:(&cht_wc_regmap_cfg)->lock);
[   66.674561]
                *** DEADLOCK ***

The problem is that the CHT Whiskey Cove PMIC's builtin i2c-adapter is
itself a part of an i2c-client (the PMIC). This means that transfers done
through it take adapter->bus_lock twice, once for the parent i2c-adapter
and once for its own bus_lock. Lockdep does not like this nested locking.

To make lockdep happy in the case of busses with muxes, the i2c-core's
i2c_adapter_lock_bus function calls:

 rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter));

But i2c_adapter_depth only works when the direct parent of the adapter is
another adapter, as it is only meant for muxes. In this case there is an
i2c-client and MFD instantiated platform_device in the parent->child chain
between the 2 devices.

This commit overrides the default i2c_lock_operations, passing a hardcoded
depth of 1 to rt_mutex_lock_nested, making lockdep happy.

Note that if there were to be a mux attached to the i2c-wc-cht adapter,
this would break things again since the i2c-mux code expects the
root-adapter to have a locking depth of 0. But the i2c-wc-cht adapter
always has only 1 client directly attached in the form of the charger IC
paired with the CHT Whiskey Cove PMIC.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Rename the bindings documentation file for Renesas EMEV2 IIC controller
from i2c-emev2.txt to renesas,iic-emev2.txt.

This is part of an ongoing effort to name bindings documentation files for
Renesas IP blocks consistently, in line with the compat strings they
document.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Rename the bindings documentation file for R-Car I2C controller
from i2c-rcar.txt to renesas,i2c.txt.

This is part of an ongoing effort to name bindings documentation files for
Renesas IP blocks consistently, in line with the compat strings they
document.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

In the general move to have i2c_new_*_device functions which return
ERR_PTR instead of NULL, this patch converts i2c_new_secondary_device().

There are only few users, so this patch converts the I2C core and all
users in one go. The function gets renamed to i2c_new_ancillary_device()
so out-of-tree users will get a build failure to understand they need to
adapt their error checking code.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> # adv748x
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # adv7511 + adv7604
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # adv7604
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

The 'enable' clock of I2C master is required, we should return an error
if failed to get the 'enable' clock, to make sure the I2C driver can be
defer probe if the clock resource is not ready.
Signed-off-by: NBaolin Wang <baolin.wang@linaro.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Use the new helper that wraps the calls to platform_get_resource()
and devm_ioremap_resource() together.
Signed-off-by: NBaolin Wang <baolin.wang@linaro.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Now there is no need to keep our I2C driver to be initialized so early,
thus changing to module level and let it can be built as a module,
meanwhile adding some module information.
Signed-off-by: NBaolin Wang <baolin.wang@linaro.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

of_find_property() will return NULL if of_node is NULL,
thus of_irq_get_by_name() returns -EINVAL which we ignore,
so no need to double check.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

drivers/i2c/busses/i2c-designware-master.c: In function ‘i2c_dw_init_recovery_info’:
drivers/i2c/busses/i2c-designware-master.c:658:6: warning: unused variable ‘r’ [-Wunused-variable]
  int r;
      ^
Fixes: 33eb09a0 ("i2c: designware: make use of devm_gpiod_get_optional")
Signed-off-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Acked-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

This reverts commit 684ca712.
I overlooked that the Rev-by tag was given in advance assuming a fix was
made for the next revision.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

This reverts commit d13ed84b.
I overlooked that the Rev-by tag was given in advance assuming a fix was
made for the next revision.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

There is a semantical change: if devm_gpiod_get_optional returns -ENOSYS
this is passed as error to the caller. This effectively reverts commit
d1fa7452 ("i2c: designware: Consider SCL GPIO optional") which
shouldn't be necessary any more since gpiod_get_optional doesn't return
-ENOSYS any more with GPIOLIB=n.
Signed-off-by: NUwe Kleine-König <uwe@kleine-koenig.org>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Rename the bindings documentation file for Renesas EMEV2 IIC controller
from i2c-emev2.txt to renesas,iic-emev2.txt.

This is part of an ongoing effort to name bindings documentation files for
Renesas IP blocks consistently, in line with the compat strings they
document.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Rename the bindings documentation file for RIIC controller
from i2c-riic.txt to renesas,riic.txt.

This is part of an ongoing effort to name bindings documentation files for
Renesas IP blocks consistently, in line with the compat strings they
document.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Rename the bindings documentation file for R-Car I2C controller
from i2c-rcar.txt to renesas,rcar.txt.

This is part of an ongoing effort to name bindings documentation files for
Renesas IP blocks consistently, in line with the compat strings they
document.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Rename the bindings documentation file for sh_mobile I2C controller
from i2c-sh_mobile.txt to renesas,iic.txt.

This is part of an ongoing effort to name bindings documentation files for
Renesas IP blocks consistently, in line with the compat strings they
document.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.
Signed-off-by: NChuhong Yuan <hslester96@gmail.com>
Reviewed-by: NJean Delvare <jdelvare@suse.de>
Acked-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Use the new helper devm_platform_ioremap_resource() which wraps the
platform_get_resource() and devm_ioremap_resource() together, to
simplify the code.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Acked-by: NDong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Use the new helper devm_platform_ioremap_resource() which wraps the
platform_get_resource() and devm_ioremap_resource() together, to
simplify the code.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Reviewed-by: NDong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

In commit 518a2f19 ("dma-mapping: zero memory returned from
dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So
memset is not needed.
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NFuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

The I2C driver fails to probe if CONFIG_PM_SLEEP=n because runtime PM
doesn't depend on the PM sleep and in this case the runtime PM ops are
not included in the driver, resulting in I2C clock not being enabled.
It's much cleaner to simply allow compiler to remove the dead code
instead of messing with the #ifdefs.

This patch fixes such errors when CONFIG_PM_SLEEP=n:

  tegra-i2c 7000c400.i2c: timeout waiting for fifo flush
  tegra-i2c 7000c400.i2c: Failed to initialize i2c controller
Signed-off-by: NDmitry Osipenko <digetx@gmail.com>
Acked-by: NJon Hunter <jonathanh@nvidia.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Pull structleak fix from Kees Cook:
 "Disable gcc-based stack variable auto-init under KASAN (Arnd
  Bergmann).

  This fixes a bunch of build warnings under KASAN and the
  gcc-plugin-based stack auto-initialization features (which are
  arguably redundant, so better to let KASAN control this)"

* tag 'meminit-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  structleak: disable STRUCTLEAK_BYREF in combination with KASAN_STACK

Merge tag 'kbuild-fixes-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - add compile_commands.json to .gitignore

 - fix false-positive warning from gen_compile_commands.py after
   allnoconfig build

 - remove unused code

* tag 'kbuild-fixes-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: remove unused single-used-m
  gen_compile_commands: lower the entry count threshold
  .gitignore: Add compilation database file
  kbuild: remove unused objectify macro

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes for 5.3-rc2 to resolve
  some reported issues.

  Nothing major at all, some binder bugfixes for issues found, some new
  mei device ids, firmware building warning fixes, habanalabs fixes, a
  few other build fixes, and a MAINTAINERS update.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  test_firmware: fix a memory leak bug
  hpet: Fix division by zero in hpet_time_div()
  eeprom: make older eeprom drivers select NVMEM_SYSFS
  vmw_balloon: Remove Julien from the maintainers list
  fpga-manager: altera-ps-spi: Fix build error
  mei: me: add mule creek canyon (EHL) device ids
  binder: prevent transactions to context manager from its own process.
  binder: Set end of SG buffer area properly.
  firmware: Fix missing inline
  firmware: fix build errors in paged buffer handling code
  habanalabs: don't reset device when getting VRHOT
  habanalabs: use %pad for printing a dma_addr_t

Pull tty fixes from Greg KH:
 "Here are two tty/vt fixes:

   - delete the netx-serial driver as the arch has been removed, no need
     to keep the serial driver for it around either.

   - vt console_lock fix to resolve a reported noisy warning at runtime

  Both of these have been in linux-next with no reported issues"

* tag 'tty-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt: Grab console_lock around con_is_bound in show_bind
  tty: serial: netx: Delete driver

Pull SPDX fixes from Greg KH:
 "Here are some small SPDX fixes for 5.3-rc2 for things that came in
  during the 5.3-rc1 merge window that we previously missed.

  Only three small patches here:

   - two uapi patches to resolve some SPDX tags that were not correct

   - fix an invalid SPDX tag in the iomap Makefile file

  All have been properly reviewed on the public mailing lists"

* tag 'spdx-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  iomap: fix Invalid License ID
  treewide: remove SPDX "WITH Linux-syscall-note" from kernel-space headers again
  treewide: add "WITH Linux-syscall-note" to SPDX tag of uapi headers

Pull USB fixes from Greg KH:
 "Here are some small fixes for 5.3-rc2. All of these resolve some
  reported issues, some more than others :)

  Included in here is:

   - xhci fix for an annoying issue with odd devices

   - reversion of some usb251xb patches that should not have been merged

   - usb pci quirk additions and fixups

   - usb storage fix

   - usb host controller error test fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  xhci: Fix crash if scatter gather is used with Immediate Data Transfer (IDT).
  usb: usb251xb: Reallow swap-dx-lanes to apply to the upstream port
  Revert "usb: usb251xb: Add US port lanes inversion property"
  Revert "usb: usb251xb: Add US lanes inversion dts-bindings"
  usb: wusbcore: fix unbalanced get/put cluster_id
  usb/hcd: Fix a NULL vs IS_ERR() bug in usb_hcd_setup_local_mem()
  usb-storage: Add a limitation for blk_queue_max_hw_sectors()
  usb: pci-quirks: Minor cleanup for AMD PLL quirk
  usb: pci-quirks: Correct AMD PLL quirk detection

Pull ARM SoC fixes from Olof Johansson:
 "Here's the first batch of fixes for this release cycle.

  Main diffstat here is the re-deletion of netx. I messed up and most
  likely didn't remove the files from the index when I test-merged this
  and saw conflicts, and from there on out 'git rerere' remembered the
  mistake and I missed checking it. Here it's done again as expected.

  Besides that:

   - A defconfig refresh + enabling of new drivers for u8500

   - i.MX fixlets for i2c/SAI/pinmux

   - sleep.S build fix for Davinci

   - Broadcom devicetree build/warning fix"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: defconfig: u8500: Add new drivers
  ARM: defconfig: u8500: Refresh defconfig
  ARM: dts: bcm: bcm47094: add missing #cells for mdio-bus-mux
  ARM: davinci: fix sleep.S build error on ARMv4
  arm64: dts: imx8mq: fix SAI compatible
  arm64: dts: imx8mm: Correct SAI3 RXC/TXFS pin's mux option #1
  ARM: dts: imx6ul: fix clock frequency property name of I2C buses
  ARM: Delete netx a second time
  ARM: dts: imx7ulp: Fix usb-phy unit address format

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 fixes and functional updates:

   - Prevent stale huge I/O TLB mappings on 32bit. A long standing bug
     which got exposed by KPTI support for 32bit

   - Prevent bogus access_ok() warnings in arch_stack_walk_user()

   - Add display quirks for Lenovo devices which have height and width
     swapped

   - Add the missing CR2 fixup for 32 bit async pagefaults. Fallout of
     the CR2 bug fix series.

   - Unbreak handling of force enabled HPET by moving the 'is HPET
     counting' check back to the original place.

   - A more accurate check for running on a hypervisor platform in the
     MDS mitigation code. Not perfect, but more accurate than the
     previous one.

   - Update a stale and confusing comment vs. IRQ stacks"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/speculation/mds: Apply more accurate check on hypervisor platform
  x86/hpet: Undo the early counter is counting check
  x86/entry/32: Pass cr2 to do_async_page_fault()
  x86/irq/64: Update stale comment
  x86/sysfb_efi: Add quirks for some devices with swapped width and height
  x86/stacktrace: Prevent access_ok() warnings in arch_stack_walk_user()
  mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()
  x86/mm: Sync also unmappings in vmalloc_sync_all()
  x86/mm: Check for pfn instead of page in vmalloc_sync_one()