Add a new flag to indicate that the codec has no jack-detection cap.
This flag should be set for hardwares that have no jack-detect
implementation although the codec chip itself supports it.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It's a bit too big and used too often as an inline function.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Necessary for working on the jack-detection suppression feature.

The new HP laptops turns off the mute LED with VREF50 or VREF80, but
not in HIZ unlike the previous models.  Since VREF50 (also 80) works
with the previous models, let's use VREF50 for all.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A few small WM8994 updates to go on top of the previous lot of things
that were sent.  They collide with some -next work so I'd really like to
get them into 3.3-rc3 if possible to merge back up into the -next code.
All driver specific and unexciting in the grand scheme of things.

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The VMID ramp rate is supposed to be 0x3, not 11b. Fix that.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

The driver accidentally exchanged the left/right fields for stereo AC'97
mixer registers.  This affected only the aux and CD inputs because the
line input bypasses the AC'97 codec and the mic input is mono; cards
without AC'97 (Xonar DS/DG/HDAV Slim, HG2PCI, HiFier) were not affected.
Reported-and-tested-by: NAbby Cedar <abbycedar@yahoo.com.au>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Cc: 2.6.31+ <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds the HD Audio DeviceIDs for the Intel Lynx Point PCH.
Signed-off-by: NSeth Heasley <seth.heasley@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This hardware requires same fixup for the node 0x0f like Asus A6Rp.
More information: https://bugzilla.redhat.com/show_bug.cgi?id=785417Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In patch_ca0132.c, the error returned from chipio_write() isn't checked
always.  Also, the power-up/down sequence isn't tracked properly in some
error paths.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The only particularly remarkable change here is the one for handling of
the Android suspend ignore code for idle_bias_off CODECs.  That one is
actually a regression fix as some of the new power savings that have
been introduced confused the suspend ignore code, making devices that
are active for non-audio reasons look like they are idle causing them to
be suspended instead of being kept active.

Wrongly slipped in from the commit 9322ca54.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We can enable VMID independently of the bias in some use cases so we need
to ensure that the core device is powered up.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

sparse complains that "spec->multiout.dac_nids" is a pointer.

sound/pci/hda/patch_realtek.c:2321:37: error: incompatible types for operation (>)
sound/pci/hda/patch_realtek.c:2321:37:    left side has type unsigned short const [usertype] *dac_nids
sound/pci/hda/patch_realtek.c:2321:37:    right side has type int

It was meant to be num_dacs instead of dac_nids.
Although the current code still works as expected (when num_dacs is zero,
dac_nids should be NULL, too), better to fix now, of course.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The header 'linux/moduleparam.h' is included twice in
'sound/isa/sb/emu8000_patch.c'. Once is enough.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In most cases, the slave strings for vmaster are identical between
volumes and switches except for "xxx Volume" and "xxx Switch" suffix.
Now snd_hda_add_vmaster() takes the optional suffix argument so that
each string can be composed with the given suffix, and we can share the
slave name strings in both volume and switch calls nicely.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The changes for slave controls in patch_realtek.c must be merged for the
further works.

The recent changes in Realtek auto-parser added the new "Bass Speaker"
and "CLFE" mixer elements which should be tracked as vmaster slaves,
too.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42720Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The Lenovo laptops with cx5066 chips seem to work better with
model=auto.  Let's get rid of the fallback to the wrong model.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=738397Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Since the dynamic pin power-control and the analog low-current mode
may lead to pop-noise, it's safer to set it off as default.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128

Cc: <stable@kernel.org> [v3.1+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is an attempt to fix S3-resume problems reported for a few
laptops with different Conexant codecs.  They show the communication
stalls at some time in S3, and the driver falls back into the
single-cmd mode.  This leads to the silent output or the lack of
auto-mute feature.

As a workaround, here enables the sync_write and the bus-reset flags
to make the communication more stable.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=740115
Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=738397Signed-off-by: NTakashi Iwai <tiwai@suse.de>

VIA codecs have several different power-saving features, and one of
them is the analog low-current mode.  But it turned out that the ALC
mode causes pop-noises at each on/off time on some machines.  As a
quick workaround, disable the ALC when another power-saving feature,
the dynamic pin power-control, is turned off, too, since the dynamic
power-control is already exposed as a mixer enum element so that user
can turn it on/off freely.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128

Cc: <stable@kernel.org> [v3.1+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The analog low-current mode must be enabled when the no stream is
running but the current detection checks it in a wrong way.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128

Cc: <stable@kernel.org> [v3.1+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of always writing AC_VERB_SET_POWER_STATE, check the current
power-state and don't write again if the value is already set.
This may reduce the click noise upon the dynamic power-state change
(e.g. in analog-input mixer).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The second line output mixer has the controls for the line input bypasses
in the opposite order.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

This typo caused the wrong codec's nid to be checked for wcaps type.
As a result, sometimes speakers would duplicate the output sent to
HDMI output.

Cc: stable@kernel.org
BugLink: https://bugs.launchpad.net/bugs/924320Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For master mode, set Output [X|A|V]SP_SCLK Sourcing Mode to MCLK Mode.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NBrian Austin <brian.austin@cirrus.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NSusan Gao <sgao@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

If cs_automic is called twice (like it is during init) while the mic
is present, it will over-write the last_input with the new one,
causing it to switch back to the automic input when the mic is
unplugged. This leaves the driver in a state (cur_input, last_input,
and automix_idx the same) where the internal mic can not be selected
until it is rebooted without the mic attached.

Check that the mic hasn't already been switched to before setting
last_input.
Signed-off-by: NDylan Reid <dgreid@chromium.org>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If an idle_bias_off device is in any state other than off then it is still
active for some reason (typically a low power function such as accessory
detection). This wasn't an issue when the feature was implemented as we
always went to _ON for any active function, subsequent power improvements
have changed things.

With the modern way of doing things we should overhaul the infrastructure
to allow devices to explicitly take references for these functions but
that's a much more invasive change and will require driver updates to
deploy, this will bring the framework into line with the existing driver
set before we do that work.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NLiam Girdwood <lrg@ti.com>

Now we've switched over to regmap the ASoC level cache sync will be
ineffectual and potentially harmful as there is no longer an ASoC level
cache.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The user reports that model=auto works better than current handling
on a 3.2 based kernel (with jack detection patches backported).
Since model=auto is what we prefer these days anyway, the quirk
should be removed.

Alsa-info for the relevant machine:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/923316/+attachment/2702812/+files/alsa-info.txt.Pbfno2x7bp

BugLink: https://bugs.launchpad.net/bugs/923316Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If a codec has both a front and a rear Line In, two controls both
named "Line Jack" will be created, which causes parsing to fail.
While a long term solution might be to name the jacks differently,
this extra check is consistent with what is already being done in many
auto-parsers, and will also protect against other cases when two
inputs have the same label.

BugLink: https://bugs.launchpad.net/bugs/923409Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

IN1L/R is routed to both line output mixers, we don't route IN1 to LINEOUT1
and IN2 to LINEOUT2.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

It turned out that other ASUS laptops require the similar fix to
enable the VREF on the pin 0x0f for the secret output amp, not only
ASUS A6Rp.  Moreover, it's required even when the pin is being used
as the output.  Thus, writing a fixed value doesn't work always.

This patch applies the VREF-fix for all ASUS laptops with ALC861/660
in a fixup function that checks the current value and turns on only
the VREF value no matter whether input or output direction is set.

The automute function is modified as well to keep the pin VREF upon
muting/unmuting via pin-control; otherwise the pin VREF is reset at
plugging/unplugging a jack.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42588

Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A bunch of small driver specific fixes - nothing terribly exciting here,
all of this will only affect people using particular devices and then
usually only in some use cases.

The Openmoko GTA01 machine has been removed from the machine ID database,
  so we need to remove references to it as well.

Without that fix we have:
  sound/soc/samsung/neo1973_wm8753.c: In function ‘neo1973_wm8753_init’:
  sound/soc/samsung/neo1973_wm8753.c:325:2: error: implicit declaration of function ‘machine_is_neo1973_gta01’
Signed-off-by: NDenis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>