Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 10 7月, 2020 3 次提交
  3. 23 6月, 2020 3 次提交
  5. 02 6月, 2020 4 次提交
  7. 31 3月, 2020 4 次提交
    • I
      devlink: Allow setting of packet trap group parameters · c064875a
      由 Ido Schimmel 提交于 
      The previous patch allowed device drivers to publish their default
binding between packet trap policers and packet trap groups. However,
some users might not be content with this binding and would like to
change it.

In case user space passed a packet trap policer identifier when setting
a packet trap group, invoke the appropriate device driver callback and
pass the new policer identifier.

v2:
* Check for presence of 'DEVLINK_ATTR_TRAP_POLICER_ID' in
  devlink_trap_group_set() and bail if not present
* Add extack error message in case trap group was partially modified
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c064875a
    • I
      devlink: Add packet trap group parameters support · f9f54392
      由 Ido Schimmel 提交于 
      Packet trap groups are used to aggregate logically related packet traps.
Currently, these groups allow user space to batch operations such as
setting the trap action of all member traps.

In order to prevent the CPU from being overwhelmed by too many trapped
packets, it is desirable to bind a packet trap policer to these groups.
For example, to limit all the packets that encountered an exception
during routing to 10Kpps.

Allow device drivers to bind default packet trap policers to packet trap
groups when the latter are registered with devlink.

The next patch will enable user space to change this default binding.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f9f54392
    • I
      devlink: Add packet trap policers support · 1e8c6619
      由 Ido Schimmel 提交于 
      Devices capable of offloading the kernel's datapath and perform
functions such as bridging and routing must also be able to send (trap)
specific packets to the kernel (i.e., the CPU) for processing.

For example, a device acting as a multicast-aware bridge must be able to
trap IGMP membership reports to the kernel for processing by the bridge
module.

In most cases, the underlying device is capable of handling packet rates
that are several orders of magnitude higher compared to those that can
be handled by the CPU.

Therefore, in order to prevent the underlying device from overwhelming
the CPU, devices usually include packet trap policers that are able to
police the trapped packets to rates that can be handled by the CPU.

This patch allows capable device drivers to register their supported
packet trap policers with devlink. User space can then tune the
parameters of these policer (currently, rate and burst size) and read
from the device the number of packets that were dropped by the policer,
if supported.

Subsequent patches in the series will allow device drivers to create
default binding between these policers and packet trap groups and allow
user space to change the binding.

v2:
* Add 'strict_start_type' in devlink policy
* Have device drivers provide max/min rate/burst size for each policer.
  Use them to check validity of user provided parameters
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1e8c6619
    • E
      devlink: Implicitly set auto recover flag when registering health reporter · ba7d16c7
      由 Eran Ben Elisha 提交于 
      When health reporter is registered to devlink, devlink will implicitly set
auto recover if and only if the reporter has a recover method. No reason
to explicitly get the auto recover flag from the driver.

Remove this flag from all drivers that called
devlink_health_reporter_create.

All existing health reporters set auto recovery to true if they have a
recover method.

Yet, administrator can unset auto recover via netlink command as prior to
this patch.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ba7d16c7
  9. 28 3月, 2020 1 次提交
  11. 27 3月, 2020 5 次提交
    • J
      devlink: implement DEVLINK_CMD_REGION_NEW · b9a17abf
      由 Jacob Keller 提交于 
      Implement support for the DEVLINK_CMD_REGION_NEW command for creating
snapshots. This new command parallels the existing
DEVLINK_CMD_REGION_DEL.

In order for DEVLINK_CMD_REGION_NEW to work for a region, the new
".snapshot" operation must be implemented in the region's ops structure.

The desired snapshot id must be provided. This helps avoid confusion on
the purpose of DEVLINK_CMD_REGION_NEW, and keeps the API simpler.

The requested id will be inserted into the xarray tracking the number of
snapshots using each id. If this id is already used by another snapshot
on any region, an error will be returned.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b9a17abf
    • J
      devlink: track snapshot id usage count using an xarray · 12102436
      由 Jacob Keller 提交于 
      Each snapshot created for a devlink region must have an id. These ids
are supposed to be unique per "event" that caused the snapshot to be
created. Drivers call devlink_region_snapshot_id_get to obtain a new id
to use for a new event trigger. The id values are tracked per devlink,
so that the same id number can be used if a triggering event creates
multiple snapshots on different regions.

There is no mechanism for snapshot ids to ever be reused. Introduce an
xarray to store the count of how many snapshots are using a given id,
replacing the snapshot_id field previously used for picking the next id.

The devlink_region_snapshot_id_get() function will use xa_alloc to
insert an initial value of 1 value at an available slot between 0 and
U32_MAX.

The new __devlink_snapshot_id_increment() and
__devlink_snapshot_id_decrement() functions will be used to track how
many snapshots currently use an id.

Drivers must now call devlink_snapshot_id_put() in order to release
their reference of the snapshot id after adding region snapshots.

By tracking the total number of snapshots using a given id, it is
possible for the decrement() function to erase the id from the xarray
when it is not in use.

With this method, a snapshot id can become reused again once all
snapshots that referred to it have been deleted via
DEVLINK_CMD_REGION_DEL, and the driver has finished adding snapshots.

This work also paves the way to introduce a mechanism for userspace to
request a snapshot.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      12102436
    • J
      devlink: report error once U32_MAX snapshot ids have been used · 7ef19d3b
      由 Jacob Keller 提交于 
      The devlink_snapshot_id_get() function returns a snapshot id. The
snapshot id is a u32, so there is no way to indicate an error code.

A future change is going to possibly add additional cases where this
function could fail. Refactor the function to return the snapshot id in
an argument, so that it can return zero or an error value.

This ensures that snapshot ids cannot be confused with error values, and
aids in the future refactor of snapshot id allocation management.

Because there is no current way to release previously used snapshot ids,
add a simple check ensuring that an error is reported in case the
snapshot_id would over flow.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7ef19d3b
    • J
      devlink: convert snapshot destructor callback to region op · a0a09f6b
      由 Jacob Keller 提交于 
      It does not makes sense that two snapshots for a given region would use
different destructors. Simplify snapshot creation by adding
a .destructor op for regions.

This operation will replace the data_destructor for the snapshot
creation, and makes snapshot creation easier.
Noticed-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a0a09f6b
    • J
      devlink: prepare to support region operations · e8937681
      由 Jacob Keller 提交于 
      Modify the devlink region code in preparation for adding new operations
on regions.

Create a devlink_region_ops structure, and move the name pointer from
within the devlink_region structure into the ops structure (similar to
the devlink_health_reporter_ops).

This prepares the regions to enable support of additional operations in
the future such as requesting snapshots, or accessing the region
directly without a snapshot.

In order to re-use the constant strings in the mlx4 driver their
declaration must be changed to 'const char * const' to ensure the
compiler realizes that both the data and the pointer cannot change.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Reviewed-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e8937681
  13. 24 3月, 2020 2 次提交
  15. 21 3月, 2020 1 次提交
  17. 26 2月, 2020 2 次提交
  19. 25 2月, 2020 1 次提交
  21. 19 2月, 2020 1 次提交
  23. 27 1月, 2020 1 次提交
  25. 19 1月, 2020 3 次提交
  27. 12 1月, 2020 1 次提交
  29. 11 1月, 2020 2 次提交
  31. 09 1月, 2020 1 次提交
  33. 13 11月, 2019 1 次提交
  35. 12 11月, 2019 1 次提交
  37. 10 11月, 2019 1 次提交
  39. 09 11月, 2019 1 次提交
  41. 08 11月, 2019 1 次提交