fixed below checkpatch warning.
- Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed below checkpatch warning.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
- WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then pr_warn(...  to printk(KERN_WARNING ...

and add pr_fmt.
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed below checkpatch warning.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

CsrThreadHandle is typedef of struct CsrThread.
Some functions in csr_framework_ext.h use it as parameter.
But, nobody call them.
Signed-off-by: NSeongJae Park <sj38.park@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Nobody use struct CsrThread. So, remove it.
Signed-off-by: NSeongJae Park <sj38.park@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

gcc/sparse complain about the following:

drivers/staging/ced1401/ced_ioc.c:931:1: warning: the frame size of 4144 bytes is larger than 2048 bytes [-Wframe-larger-than=]

Fix it by dynamically allocating it.
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This function handles all the insn_config instructions for the
digital i/o subdevice. These functions are supposed to return
the number of instruction parameters used (insn->n) or an -errno.
Fix the switch() so that the correct result is returned for all
INSN_CONFIG_* cases.

To clarify the code, add a local variable for the 'bit' used with
the instructions used to configure and query the input/output setting
of a channel.

For aesthetic reasons, add a whitespace between each case to improve
readability.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This simple function is only called by ni_660x_dio_insn_config().
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This simple function is only called by ni_660x_dio_insn_config().
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This BUG_ON can never happen. The 'chan' value comes from the comedi
core in the insn->chanspec and will always be in range for the subdevice
number of channels (s->n_chan = NUM_PFI_CHANNELS).
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is used to get the dev->board_ptr from the
comedi_device. Remove the function and use a local variable
to hold the pointer where used. Use the comedi_board() helper
to get the pointer.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the module init code to the end of the file. This removes
the need for all the forward declarations.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

this function memset's the cmdqmem, instead do it in  slic_cmdq_init.
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

this default statement does nothing in the irqhandler, so remove it
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

this takes up the error path cleanup,
fixes a crash too due to null deref
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The comedi core now sets the 'hw_dev' pointer in the function
comedi_auto_config_helper() before calling the auto attach
function in the driver.

Remove the now unnecessary call to comedi_set_hw_dev() in the
drivers that use the auto-config attach mechanism.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This inline function has a very generic name and it's only a
wrapper around a simple kzalloc(). Since the inline function
does not save any lines-of-code, instead of renaming it just
remove it and do the kzalloc() directly.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.

CC: Henk de Groot <pe1dnn@amsat.org>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes the following checkpatch issues:

WARNING: line over 80 characters
+INT InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *puiBuffer);

ERROR: "foo * bar" should be "foo *bar"
+INT InterfaceWakeUp(struct bcm_mini_adapter * Adapter);
Signed-off-by: NCeri James <jamesceri@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes the following checkpatch issues:

WARNING: line over 80 characters
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TOKEN_COUNTS, DBG_LVL_ALL, "=====>\n");

ERROR: space required after that ',' (ctx:VxV)
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TOKEN_COUNTS, DBG_LVL_ALL, "=====>\n");
 	                       ^
WARNING: line over 80 characters
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TOKEN_COUNTS, DBG_LVL_ALL, "Adapter found NULL!\n");

ERROR: space required after that ',' (ctx:VxV)
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TOKEN_COUNTS, DBG_LVL_ALL, "Adapter found NULL!\n");
 		                       ^
Signed-off-by: NCeri James <jamesceri@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

dma_addr_t can be of size 64 or 32bits, depending on the architecture.

This fixes these build warnings for ARCH=i386, and also tested on x86_64:

drivers/staging/et131x/et131x.c: In function ‘et131x_rx_dma_memory_alloc’:
drivers/staging/et131x/et131x.c:2356:11: warning: passing argument 2 of ‘et131x_align_allocated_memory’ from incompatible pointer type [enabled by default]
drivers/staging/et131x/et131x.c:2260:13: note: expected ‘u64 *’ but argument is of type ‘dma_addr_t *’
drivers/staging/et131x/et131x.c:2378:11: warning: passing argument 2 of ‘et131x_align_allocated_memory’ from incompatible pointer type [enabled by default]
drivers/staging/et131x/et131x.c:2260:13: note: expected ‘u64 *’ but argument is of type ‘dma_addr_t *’
drivers/staging/et131x/et131x.c: In function ‘free_send_packet’:
drivers/staging/et131x/et131x.c:3540:5: warning: left shift count >= width of type [enabled by default]
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

remove ASSERT and remove all its callers altogether in the code
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

fail instead calling request_firmware with filename as a null string
and return -ENOENT
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

USE_FBR0 has always been defined, even in the original driver code.
Remove the define and #ifdef code to leave the code in the same state.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

	'>> 32 of a 32bit value is undefined in C. The compiler is free
	to do what it likes with this...'

Change all uses of '>> 32' to use upper_32_bits() and use
the corresponding lower_32_bits() to match.

Also remove an incorrect comment about dma alloc always returning 32bit
addresses.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

fbr_lookup.real_physaddr is only being used as a pseudonym for
fbr_lookup.ring_physaddr, so remove it and rename all instances to
ring_physaddr.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver checks that the device can handle 64bit DMA addressing in
et131x_pci_setup(), but then assumes that the top dword of a tx dma
address is always zero when creating a dma mapping in nic_send_packet().
Fix the mapping to use the higher dword of the dma_addr_t returned by
dma_map_single() and skb_frag_dma_map().

Also remove incorrect comments stating that dma_map_single() only returns
a 32 bit address.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

(skb->len - skb->data_len) is used in several places in the et131x
driver code. Converted all instances of this to use skb_headlen()
which is more readable.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed two issues when CONFIG_RTS5139=y :

  - Makefile doesn't take $(CONFIG_RTS5139). It always uses obj-m and built as
    a loadable module.
  - Rename some symbols with prefix 'rts51x_' to prevent symbol name collisions
    with drivers/staging/rts_pstor when both are configured to be built-in
    objects.

  drivers/staging/rts5139/built-in.o: In function `xd_cleanup_work':
  (.text+0x1435d): multiple definition of `xd_cleanup_work'
  drivers/staging/rts_pstor/built-in.o:(.text+0x2b96a): first defined here
  drivers/staging/rts5139/built-in.o: In function `release_xd_card':
  (.text+0x14393): multiple definition of `release_xd_card'
  drivers/staging/rts_pstor/built-in.o:(.text+0x2c491): first defined here
  drivers/staging/rts5139/built-in.o: In function `set_sense_data':
  (.text+0x1e02): multiple definition of `set_sense_data'
  drivers/staging/rts_pstor/built-in.o:(.text+0xa79f): first defined here
  drivers/staging/rts5139/built-in.o: In function `ms_delay_write':
  ...
Signed-off-by: NRoger Tseng <rogerable@realtek.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Kernel build failed for parisc architecture:

drivers/staging/ipack/carriers/tpci200.c: In function 'tpci200_free_irq':
drivers/staging/ipack/carriers/tpci200.c:190:2: error: implicit declaration of
function 'kfree' [-Werror=implicit-function-declaration]
drivers/staging/ipack/carriers/tpci200.c: In function 'tpci200_request_irq':
drivers/staging/ipack/carriers/tpci200.c:217:2: error: implicit declaration of
function 'kzalloc' [-Werror=implicit-function-declaration]
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/silicom/bypasslib/bplibk.h actually uses stuff from
version.h so it should include the header.
drivers/staging/silicom/bp_proc.c and
drivers/staging/silicom/bypasslib/bypass.c currently include the
header but use nothing from it so they don't need to.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The file uses nothing from linux/version.h, so the include is
pointless - remove it.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed usage of the cpu_is_omapXXXX in the DMM driver.  This is no
longer necessary as we can key off of the omap_dmm pointer that is
only non-NULL if the device has been probed successfully.
Signed-off-by: NAndy Gross <andy.gross@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This removes the compiler warnings for unused variables and functions in
the bp_proc.c file.

Cc: Chad Williamson <chad@dahc.us>
Cc: Daniel Cotey <puff65537@bansheeslibrary.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed include error for drm_mode.h
Signed-off-by: NAndy Gross <andy.gross@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The line6 driver does not support 'index' and 'id' module parameters so
there is no need to keep arrays for these values.  Do what other sound
drivers do and use the scalar constants instead of dummy arrays.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no reason to limit the number of line6 devices.  Drop the
static array.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Previous names of init and exit functions "init" and "cleanup" are
unconventional and are not friendly for source navigation with tags.
New names "ccg_init" and "ccg_exit" are conveninal and source navigation
friendly.
Signed-off-by: NConstantine Shulyupin <const@MakeLinux.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove explicit intialization of static procfs_dir to NULL, resolving a
checkpatch.pl error.
Signed-off-by: NChad Williamson <chad@dahc.us>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>