Atomic readq and writeq do not exist by default on some 32bit
architectures, thus causing compile errors due to non-existent symbols.
Since NTB has not been tested 32bit, disable x86_32 support until such
time as this and any other issues can be properly discovered.
Signed-off-by: NJon Mason <jon.mason@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Delete successive tests to the same location.  The code tested the result
of a previous allocation, that itself was already tested.  It is changed to
test the result of the most recent allocation.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@s exists@
local idexpression y;
expression x,e;
@@

*if ( \(x == NULL\|IS_ERR(x)\|y != 0\) )
 { ... when forall
   return ...; }
... when != \(y = e\|y += e\|y -= e\|y |= e\|y &= e\|y++\|y--\|&y\)
    when != \(XT_GETPAGE(...,y)\|WMI_CMD_BUF(...)\)
*if ( \(x == NULL\|IS_ERR(x)\|y != 0\) )
 { ... when forall
   return ...; }
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit eccf2979.

The reason is that it broke TI WiLink shared transport on Panda.
Also, callback functions should not be added to board files anymore,
so revert to implementing the power functions in the driver itself.

Additionally, changed a variable name ('status' to 'err') so that this
revert compiles properly.

Cc: stable <stable@vger.kernel.org> [3.7]
Signed-off-by: NLuciano Coelho <coelho@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Update NTB netdev version to 0.7
Signed-off-by: NJon Mason <jon.mason@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Improve driver logging to be more helpful
Signed-off-by: NJon Mason <jon.mason@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a race between disabling and enabling the tx queue, resulting
in tx timeouts.  Since all the tx timeout does is re-enable the tx
queue, simple remove the start/stop of the queue and the tx timeout
routine.
Signed-off-by: NJon Mason <jon.mason@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If ntb_netdev is unable to pass a new skb to the ntb transport for
future rx packets, it should free the newly alloc'ed skb in the error
case.  Found by Kernel memory leak detector.
Signed-off-by: NJon Mason <jon.mason@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove init/exit from probe/remove routines to correct warnings of
"Section mismatch".
Signed-off-by: NJon Mason <jon.mason@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Update NTB version to 0.25
Signed-off-by: NJon Mason <jon.mason@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If the NTB client driver enqueues the maximum number of rx buffers, it
will not be able to re-enqueue another in its callback handler due to a
lack of free entries.  This can be avoided by adding the current entry
to the free queue prior to calling the client callback handler.  With
this change, ntb_netdev will no longer encounter a rx error on its first
packet.
Signed-off-by: NJon Mason <jon.mason@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

CPU reads across NTB are slow(er) and can hang the local system if an
ECC error is encountered on the remote.  To work around the need for a
read, have the remote side write its current position in the rx buffer
to the local system's buffer and use that to see if there is room when
transmitting.
Signed-off-by: NJon Mason <jon.mason@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct gcc warning of using too much stack debugfs_read.  This is done
by kmallocing the buffer instead of using the char array on stack.
Also, shrinking the buffer to something closer to what is currently
being used.
Signed-off-by: NJon Mason <jon.mason@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Whitespace cleanups found via `indent`
Signed-off-by: NJon Mason <jon.mason@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Declare ntb_bus_type static to remove it from name space, and remove
unused ntb_get_max_spads function.  Found via `make namespacecheck`.
Signed-off-by: NJon Mason <jon.mason@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use simple_open for debugfs instead of recreating it in the NTB driver.
Caught by coccicheck.
Signed-off-by: NJon Mason <jon.mason@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Move all cancel_delayed_work_sync to a work thread to prevent sleeping
in interrupt context (when the NTB link goes down).  Caught via
'Sleep inside atomic section checking'
Signed-off-by: NJon Mason <jon.mason@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Since it is possible for the memory windows on the two NTB connected
systems to be different sizes, the divergent sizes must be accounted for
in the segmentation of the MW's on each side.  Create separate size
variables and initialization as necessary.
Signed-off-by: NJon Mason <jon.mason@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

mmiowb is not sufficient to flush the data and is causing data
corruption.  Change to wmb and the data corruption is no more.
Signed-off-by: NJon Mason <jon.mason@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Attempts to probe client ntb drivers without ntb hardware present will
result in null pointer dereference due to the lack of the ntb bus device
being registers.  Check to see if this is the case, and fail all calls
by the clients registering their drivers.
Signed-off-by: NJon Mason <jon.mason@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There was a bug in the code when managing a GE IP-OCTAL-485 board. The RX would
be enabled but we have a wrong state in the rx_enable flag.

Then, if the user changes the terminal settings, RX would not be enabled again.
Signed-off-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use CLOEXEC flag when opening kvp_pool_x files to prevent file
descriptor leakage. Not using it was causing a problem when
SELinux was enabled.
Signed-off-by: NTomas Hozza <thozza@redhat.com>
Acked-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The default interrupt delivery model in Linux does not support the Hyper-V
vmbus delivery model when the guest is configured with multiple VCPUs. I have
sent a patch to address this - delivering the vmbus interrupt on a separate
IDT vector. Until this patch is applied, bind all vmbus interrupts to the boot
CPU.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This brings in all of the mei and other fixes that are needed to continue
development in this branch.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

These are now gone from the kernel, so remove them from the newly-added
drivers before they start to cause build errors for people.

Cc: Jon Mason <jon.mason@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

A virtual ethernet device that uses the NTB transport API to
send/receive data.
Signed-off-by: NJon Mason <jon.mason@intel.com>
Reviewed-by: NNicholas Bellinger <nab@linux-iscsi.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

A PCI-Express non-transparent bridge (NTB) is a point-to-point PCIe bus
connecting 2 systems, providing electrical isolation between the two subsystems.
A non-transparent bridge is functionally similar to a transparent bridge except
that both sides of the bridge have their own independent address domains.  The
host on one side of the bridge will not have the visibility of the complete
memory or I/O space on the other side of the bridge.  To communicate across the
non-transparent bridge, each NTB endpoint has one (or more) apertures exposed to
the local system.  Writes to these apertures are mirrored to memory on the
remote system.  Communications can also occur through the use of doorbell
registers that initiate interrupts to the alternate domain, and scratch-pad
registers accessible from both sides.

The NTB device driver is needed to configure these memory windows, doorbell, and
scratch-pad registers as well as use them in such a way as they can be turned
into a viable communication channel to the remote system.  ntb_hw.[ch]
determines the usage model (NTB to NTB or NTB to Root Port) and abstracts away
the underlying hardware to provide access and a common interface to the doorbell
registers, scratch pads, and memory windows.  These hardware interfaces are
exported so that other, non-mainlined kernel drivers can access these.
ntb_transport.[ch] also uses the exported interfaces in ntb_hw.[ch] to setup a
communication channel(s) and provide a reliable way of transferring data from
one side to the other, which it then exports so that "client" drivers can access
them.  These client drivers are used to provide a standard kernel interface
(i.e., Ethernet device) to NTB, such that Linux can transfer data from one
system to the other in a standard way.
Signed-off-by: NJon Mason <jon.mason@intel.com>
Reviewed-by: NNicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Do not rely on implicit header dependencies as they are known to
break.
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NAndy King <acking@vmware.com>
Signed-off-by: NDmitry Torokhov <dtor@vmware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Acked-by: NAndy King <acking@vmware.com>
Signed-off-by: NDmitry Torokhov <dtor@vmware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

vmci_send_datagram() returns an int, with negative values indicating failure.
But we store it locally in a u32, which makes comparison of >= 0 useless.
Fixed to use an int.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAndy King <acking@vmware.com>
Signed-off-by: NDmitry Torokhov <dtor@vmware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Check for a valid queuepair ptr before trying to lock the queuepair (which will
deref it).
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAndy King <acking@vmware.com>
Signed-off-by: NDmitry Torokhov <dtor@vmware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

No need to bring in dm-mapper.h and along with it a dependency on BLOCK I/O
just to use dm_div_up().  Just use the existing DIV_ROUND_UP().
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NAndy King <acking@vmware.com>
Signed-off-by: NDmitry Torokhov <dtor@vmware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add PCI as a dependency to our build, since we always compile in the guest-side
PCI device support.
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NAndy King <acking@vmware.com>
Signed-off-by: NDmitry Torokhov <dtor@vmware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

It doesn't seem this spinlock was properly initialized. This bug was
introduced by commit 7a410e8d.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Smatch complains because the call to
	pci_set_drvdata(dev, &sockets[i].socket);
is reading one step beyond the end of the sockets[] array.  It will
crash when we use it later.

The only place which uses pci_get_drvdata() is i82092aa_pci_remove().
That function should loop through all the sockets and unregister them.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NSedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix for the daemon code and for hv_set_ifconfig.sh script, so
that the created ifcfg-* file is consistent with initscripts
documentation.
Signed-off-by: NTomas Hozza <thozza@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NJason Wang <jasowang@redhat.com>
Acked-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>