提交 · 716323c09319ae5e6c9e413a6378d61a77b26996 · openeuler / Kernel

04 3月, 2010 40 次提交

Staging: rtl8192u: ieee80211: add missing parentheses · 716323c0

由 Roel Kluin 提交于 12月 23, 2009

not(!) has a higher precedence than bit and(&).
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

716323c0

staging: add Broadcom Crystal HD driver · 7963eb43

由 Jarod Wilson 提交于 1月 04, 2010

This patch supersedes the earlier ones sent by Manu Abraham to add
the Broadcom Crystal HD driver to the staging tree, per discussion
with him about it. I've been working with Broadcom's Naren Sankar
on this driver for a number of months, and had already talked Naren
about submitting this on Broadcom's behalf, didn't expect anyone
else to jump on submitting it as quickly as Manu did. ;)

This version is a one-shot deal, incorporating the original driver,
Manu's coding style clean-ups, udev device creation support from
Edgar 'gimli' Hucek, and a number of other small tweaks from myself
and Scott Davilla, the other individual who has been working closely
on this code with Naren and I.

I've tested this iteration of the code lightly on a mini pci-e board
in a ThinkPad T61p running x86_64 Fedora 12, with the expected results,
and will test further on other systems with other variants of the card
(I have three varieties of this device currently in hand). Scott has
also tested on assorted primarily i686 varieties of Ubuntu, and Naren
has tested with both Fedora and Ubuntu, iirc.

Note: only the 70012 is currently supported by this driver, 70015
support will follow later. Also note that Blu-Ray support isn't
enabled (at the firmware level), due to misc fun related to the
BD encryption scheme, DRM, etc. :\

I *do* have a git tree containing the driver, lib, gst plugin and
firmware that I'm working from at the moment[*], as there are inter-
dependencies between the driver and lib, and the driver can be used
with kernels going a ways back (I've only tested back to 2.6.18 as
it exists in Red Hat Enterprise Linux 5). I'm exporting from there,
into a linux-next tree, then generating patches from there. The goal
is to feed everything upstream as quickly as possible, but there are
users who want this code for earlier kernels too...

The firmware will be submitted for inclusion in dwmw2's linux-firmware
tree once there is a suitable redistribution-no-modification type of
license on it (I believe Naren is working with Broadcom legal to get
that in place).

Changelog from initial Broadcom release to here:

commit d20475d444610c5683d09e63f707f5bb22359062
Author: Jarod Wilson <jarod@redhat.com>
Date:   Mon Jan 4 13:55:16 2010 -0500

    include: lib doesn't build w/o the removed stdint include
    
    So add it back...
Signed-off-by: NJarod Wilson <jarod@redhat.com>

commit c181070a330530b792d2b80e3ec6ab12a5a57394
Author: Scott Davilla <davilla@4pi.com>
Date:   Mon Jan 4 13:38:37 2010 -0500

    include: don't define VOID if its already defined
Signed-off-by: NScott Davilla <davilla@4pi.com>
Signed-off-by: NJarod Wilson <jarod@redhat.com>

commit 33d8a2b691e81212e398f53770578d79650bf0bc
Author: Jarod Wilson <jarod@redhat.com>
Date:   Mon Jan 4 13:12:10 2010 -0500

    driver: create crystalhd device using udev
    
    Based on:
    http://sourceforge.net/apps/trac/archvdr/browser/trunk/archvdr/crystalhd/use_udev.patch
    
    Signed-off-by: Edgar ( gimli ) Hucek <ebsi4711 at gmail dot com>
    
    Formatting tweaks, error-handling path fixups and any bugs added by Jarod.
Signed-off-by: NJarod Wilson <jarod@redhat.com>

commit c44c64dea5537814796fcbe2d9db0209383c78b9
Author: Manu Abraham <abraham.manu@gmail.com>
Date:   Mon Jan 4 10:32:47 2010 -0500

    crystalhd: coding style cleanups
Signed-off-by: NManu Abraham <abraham.manu@gmail.com>
Signed-off-by: NJarod Wilson <jarod@redhat.com>

commit cffa6da7467ff697a656d1dfff54bb0513a053dc
Author: Jarod Wilson <jarod@redhat.com>
Date:   Mon Jan 4 10:17:27 2010 -0500

    crystalhd: run dos2unix over everything, this is linux source...
Signed-off-by: NJarod Wilson <jarod@redhat.com>

commit 7fa38a282db7af5a5746055f7c6cef8a9b8ee138
Author: Jarod Wilson <jarod@redhat.com>
Date:   Mon Jan 4 10:02:33 2010 -0500

    crystalhd: initial import of released Broadcom code
    
    Straight import of:
    http://www.broadcom.com/docs/support/crystalhd/crystalhd_linux_20091229.zip
    
    Unfortunately, we're unable to publicly publish all the history that got
    us from the initial internal code to what was released here, but such is
    life, we can just be happy we've got this open-sourced now. :)
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NNaren Sankar <nsankar@broadcom.com>
Signed-off-by: NScott Davilla <davilla@4pi.com>
Signed-off-by: NManu Abraham <abraham.manu@gmail.com>
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

7963eb43

Staging: altpciechdma: remove driver · ca1f29c0

由 Greg Kroah-Hartman 提交于 12月 22, 2009

No one seems to be able to maintain this, or merge it into mainline, so
remove it.
Acked-by: NLeon Woestenberg <leon@sidebranch.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

ca1f29c0

Staging: p9auth: remove driver from tree · 2d629030

由 Greg Kroah-Hartman 提交于 12月 22, 2009

No one seems to be maintaining this anymore, and it is not on any
track to be merged to mainline.

Cc: Ashwin Ganti <ashwin.ganti@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

2d629030

staging: remove the b3dfg driver · a945db65

由 Greg Kroah-Hartman 提交于 12月 22, 2009

It has no users, and no developers to maintain it to get
it merged into mainline.

So sad.

Cc: Daniel Drake <ddrake@brontes3d.com>
Cc: Justin Bronder <jsbronder@brontes3d.com>
Cc: Duane Griffin <duaneg@dghda.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

a945db65

Staging: dt3155: coding style cleanups for the .h files · 8c6356e2

由 Greg Kroah-Hartman 提交于 12月 22, 2009

This cleans up some of the coding style issues in the .h files.

More remains to be done.

Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

8c6356e2

Staging: dt3155: coding style cleanups for allocator code · 1769fd86

由 Greg Kroah-Hartman 提交于 12月 22, 2009

This fixes up the worst of the coding style errors for the
allocator code.

Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

1769fd86

Staging: wlan-ng: initialise mibitem · 8125e2f6

由 Simon Horman 提交于 12月 21, 2009

$ gcc --version

gcc (Debian 4.4.2-5) 4.4.2
Copyright (C) 2009 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

$ make
...
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_dorequest’:
drivers/staging/wlan-ng/p80211wext.c:139: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:139: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwretry’:
drivers/staging/wlan-ng/p80211wext.c:967: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:967: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:967: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwretry’:
drivers/staging/wlan-ng/p80211wext.c:1057: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:1057: warning: ‘mibitem.status’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwtxpow’:
drivers/staging/wlan-ng/p80211wext.c:1149: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:1149: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:1149: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwtxpow’:
drivers/staging/wlan-ng/p80211wext.c:1123: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:1123: warning: ‘mibitem.status’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwfrag’:
drivers/staging/wlan-ng/p80211wext.c:891: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:891: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:891: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwfrag’:
drivers/staging/wlan-ng/p80211wext.c:933: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:933: warning: ‘mibitem.status’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwrts’:
drivers/staging/wlan-ng/p80211wext.c:826: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:826: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:826: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwrts’:
drivers/staging/wlan-ng/p80211wext.c:866: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:866: warning: ‘mibitem.status’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwrate’:
drivers/staging/wlan-ng/p80211wext.c:775: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:775: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:775: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwfreq’:
drivers/staging/wlan-ng/p80211wext.c:273: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:273: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:273: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwfreq’:
drivers/staging/wlan-ng/p80211wext.c:320: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwmode’:
drivers/staging/wlan-ng/p80211wext.c:401: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:401: warning: ‘mibitem.status’ may be used uninitialized in this function
...
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

8125e2f6

Staging: prism2-usb: Build should select WIRELESS_EXT · e8ffaa3a

由 Simon Horman 提交于 12月 21, 2009

The prevailing idiom is to select WIRELESS_EXT not depend on it.

Depending leaves this driver in a situation where it can only
be built if another driver that selects WIRELESS_EXT has been enabled.
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

e8ffaa3a

Staging: rtl8192su: Use z format qualifier for output of sizeof() · d512a142

由 Simon Horman 提交于 12月 21, 2009

$ gcc --version
gcc (Debian 4.4.2-5) 4.4.2
Copyright (C) 2009 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

$ make
...
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c: In function ‘ieee80211_rx_ADDBAReq’:
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c:342: warning: format ‘%ld’ expects type ‘long int’, but argument 3 has type ‘unsigned int’
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c: In function ‘ieee80211_rx_ADDBARsp’:
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c:443: warning: format ‘%ld’ expects type ‘long int’, but argument 3 has type ‘unsigned int’
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c: In function ‘ieee80211_rx_DELBA’:
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c:573: warning: format ‘%ld’ expects type ‘long int’, but argument 3 has type ‘unsigned int’
...

Also some style fixes for these lines:
+ Fix excessively long lines
+ Remove leading space before struct
+ Remove unnecessary parentheses
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

d512a142

Staging: rtl8192su: Build should select WIRELESS_EXT · 784d3119

由 Simon Horman 提交于 12月 21, 2009

The prevailing idiom is to select WIRELESS_EXT not depend on it.

Depending leaves this driver in a situation where it can only
be built if another driver that selects WIRELESS_EXT has been enabled.
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

784d3119

Staging: s5k3e2fx.c: simplify complexity by factoring · 8c172dde

由 Justin Madru 提交于 12月 18, 2009

the code was looping, setting s_move[i] to the following calculations

if (actual_step>= 0)
         s_move[i] = ((((i + 1) * gain + 0x200) - (i * gain + 0x200)) / 0x400);
else
         s_move[i] = ((((i + 1) * gain - 0x200) - (i * gain - 0x200)) / 0x400);

but, this code reduces to the expression
	s_move[i] = gain>>  10;

The reason for the complexity was to generate a step function with
integer division and rounding to land on specific values. But these calculations
can be simplified to the following code:

	gain = ((actual_step<<  10) / 5)>>  10;
	for (i = 0; i<= 4; i++)
		s_move[i] = gain;

Signed-off-by: Justin Madru<jdm64@gawab.com>
Reviewed-by: Ray Lee<ray-lk@madrabbit.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

8c172dde

Staging: w35und: Remove unused typedefs MLME_DEAUTHREQ_PARA and MLME_DISASSOCREQ_PARA · 096417e0