- 29 10月, 2020 5 次提交
-
-
由 Mathias Nyman 提交于
Creating debugfs files while loding the spin_lock_irqsave(xhci->lock) creates a lock dependecy that could possibly deadlock. Lockdep warns: ===================================================== WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected 5.10.0-rc1pdx86+ #8 Not tainted ----------------------------------------------------- systemd-udevd/386 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: ffffffffb1a94038 (pin_fs_lock){+.+.}-{2:2}, at: simple_pin_fs+0x22/0xa0 and this task is already holding: ffff9e7b87fbc430 (&xhci->lock){-.-.}-{2:2}, at: xhci_alloc_streams+0x5f9/0x810 which would create a new lock dependency: (&xhci->lock){-.-.}-{2:2} -> (pin_fs_lock){+.+.}-{2:2} Create the files a bit later after lock is released. Fixes: 673d7468 ("usb: xhci: add debugfs support for ep with stream") CC: Li Jun <jun.li@nxp.com> Reported-by: NHans de Goede <hdegoede@redhat.com> Reported-by: NMike Galbraith <efault@gmx.de> Tested-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20201028203124.375344-4-mathias.nyman@linux.intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Sandeep Singh 提交于
On some platform of AMD, S3 fails with HCE and SRE errors. To fix this, need to disable a bit which is enable in sparse controller. Cc: stable@vger.kernel.org #v4.19+ Signed-off-by: NSanket Goswami <Sanket.Goswami@amd.com> Signed-off-by: NSandeep Singh <sandeep.singh@amd.com> Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20201028203124.375344-3-mathias.nyman@linux.intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Colin Ian King 提交于
An incorrect sizeof() is being used, sizeof(rhub->ports) is not correct, it should be sizeof(*rhub->ports). This bug did not cause any issues because it just so happens the sizes are the same. Fixes: bcaa9d5c ("xhci: Create new structures to store xhci port information") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20201028203124.375344-2-mathias.nyman@linux.intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Amelie Delaunay 提交于
chip->port_type and chip->pwr_opmode are enums and when GCC considers them as unsigned, the conditions are never met. This patch takes advantage of the ret variable and fixes the following warnings: drivers/usb/typec/stusb160x.c:548 stusb160x_get_fw_caps() warn: unsigned 'chip->port_type' is never less than zero. drivers/usb/typec/stusb160x.c:570 stusb160x_get_fw_caps() warn: unsigned 'chip->pwr_opmode' is never less than zero. Fixes: da0cb631 ("usb: typec: add support for STUSB160x Type-C controller family") Reported-by: Nkernel test robot <lkp@intel.com> Signed-off-by: NAmelie Delaunay <amelie.delaunay@st.com> Link: https://lore.kernel.org/r/20201028163309.12878-1-amelie.delaunay@st.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Amelie Delaunay 提交于
When stusb160x driver is built as a module, no modalias information is available, and it prevents the module to be loaded by udev. Add MODULE_DEVICE_TABLE() to fix this issue. Fixes: da0cb631 ("usb: typec: add support for STUSB160x Type-C controller family") Signed-off-by: NAmelie Delaunay <amelie.delaunay@st.com> Link: https://lore.kernel.org/r/20201028151703.31195-1-amelie.delaunay@st.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 28 10月, 2020 9 次提交
-
-
由 Bastien Nocera 提交于
From: Bastien Nocera <hadess@hadess.net> Contrary to the comment above the id table, we didn't implement a match function. This meant that every single Apple device that was already plugged in to the computer would have its device driver reprobed when the apple-mfi-fastcharge driver was loaded, eg. the SD card reader could be reprobed when the apple-mfi-fastcharge after pivoting root during boot up and the module became available. Make sure that the driver probe isn't being run for unsupported devices by adding a match function that checks the product ID, in addition to the id_table checking the vendor ID. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1878347 Link: https://lore.kernel.org/linux-usb/CAE3RAxt0WhBEz8zkHrVO5RiyEOasayy1QUAjsv-pB0fAbY1GSw@mail.gmail.com/ Fixes: 249fa821 ("USB: Add driver to control USB fast charge for iOS devices") Cc: <stable@vger.kernel.org> # 5.8 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> [m.v.b: Add Link and Reported-by tags to the commit message] Reported-by: NPany <pany@fedoraproject.org> Tested-by: NPan (Pany) YUAN <pany@fedoraproject.org> Tested-by: NBastien Nocera <hadess@hadess.net> Signed-off-by: NBastien Nocera <hadess@hadess.net> Signed-off-by: NM. Vefa Bicakci <m.v.b@runbox.com> Link: https://lore.kernel.org/r/20201022135521.375211-3-m.v.b@runbox.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bastien Nocera 提交于
From: Bastien Nocera <hadess@hadess.net> When a USB device driver has both an id_table and a match() function, make sure to check both to find a match, first matching the id_table, then checking the match() function. This makes it possible to have module autoloading done through the id_table when devices are plugged in, before checking for further device eligibility in the match() function. Cc: <stable@vger.kernel.org> # 5.8 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> Co-developed-by: NM. Vefa Bicakci <m.v.b@runbox.com> Tested-by: NBastien Nocera <hadess@hadess.net> Signed-off-by: NBastien Nocera <hadess@hadess.net> Signed-off-by: NM. Vefa Bicakci <m.v.b@runbox.com> Tested-by: NPan (Pany) YUAN <pany@fedoraproject.org> Link: https://lore.kernel.org/r/20201022135521.375211-2-m.v.b@runbox.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tang Bin 提交于
If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in tegra_ehci_probe(). Fixes: 79ad3b5a ("usb: host: Add EHCI driver for NVIDIA Tegra SoCs") Acked-by: NAlan Stern <stern@rowland.harvard.edu> Acked-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NTang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20201026090657.49988-1-tangbin@cmss.chinamobile.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dan Carpenter 提交于
The typec_register_port() function doesn't return NULL, it returns error pointers. Fixes: da0cb631 ("usb: typec: add support for STUSB160x Type-C controller family") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NHeikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201023114017.GE18329@kadamSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Li Jun 提交于
Current tcpm_detach() only reset hard_reset_count if port->attached is true, this may cause this counter clear is missed if the CC disconnect event is generated after tcpm_port_reset() is done by other events, e.g. VBUS off comes first before CC disconect for a power sink, in that case the first tcpm_detach() will only clear port->attached flag but leave hard_reset_count there because tcpm_port_is_disconnected() is still false, then later tcpm_detach() by CC disconnect will directly return due to port->attached is cleared, finally this will result tcpm will not try hard reset or error recovery for later attach. ChiYuan reported this issue on his platform with below tcpm trace: After power sink session setup after hard reset 2 times, detach from the power source and then attach: [ 4848.046358] VBUS off [ 4848.046384] state change SNK_READY -> SNK_UNATTACHED [ 4848.050908] Setting voltage/current limit 0 mV 0 mA [ 4848.050936] polarity 0 [ 4848.052593] Requesting mux state 0, usb-role 0, orientation 0 [ 4848.053222] Start toggling [ 4848.086500] state change SNK_UNATTACHED -> TOGGLING [ 4848.089983] CC1: 0 -> 0, CC2: 3 -> 3 [state TOGGLING, polarity 0, connected] [ 4848.089993] state change TOGGLING -> SNK_ATTACH_WAIT [ 4848.090031] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @200 ms [ 4848.141162] CC1: 0 -> 0, CC2: 3 -> 0 [state SNK_ATTACH_WAIT, polarity 0, disconnected] [ 4848.141170] state change SNK_ATTACH_WAIT -> SNK_ATTACH_WAIT [ 4848.141184] pending state change SNK_ATTACH_WAIT -> SNK_UNATTACHED @20 ms [ 4848.163156] state change SNK_ATTACH_WAIT -> SNK_UNATTACHED [delayed 20 ms] [ 4848.163162] Start toggling [ 4848.216918] CC1: 0 -> 0, CC2: 0 -> 3 [state TOGGLING, polarity 0, connected] [ 4848.216954] state change TOGGLING -> SNK_ATTACH_WAIT [ 4848.217080] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @200 ms [ 4848.231771] CC1: 0 -> 0, CC2: 3 -> 0 [state SNK_ATTACH_WAIT, polarity 0, disconnected] [ 4848.231800] state change SNK_ATTACH_WAIT -> SNK_ATTACH_WAIT [ 4848.231857] pending state change SNK_ATTACH_WAIT -> SNK_UNATTACHED @20 ms [ 4848.256022] state change SNK_ATTACH_WAIT -> SNK_UNATTACHED [delayed20 ms] [ 4848.256049] Start toggling [ 4848.871148] VBUS on [ 4848.885324] CC1: 0 -> 0, CC2: 0 -> 3 [state TOGGLING, polarity 0, connected] [ 4848.885372] state change TOGGLING -> SNK_ATTACH_WAIT [ 4848.885548] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @200 ms [ 4849.088240] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed200 ms] [ 4849.088284] state change SNK_DEBOUNCED -> SNK_ATTACHED [ 4849.088291] polarity 1 [ 4849.088769] Requesting mux state 1, usb-role 2, orientation 2 [ 4849.088895] state change SNK_ATTACHED -> SNK_STARTUP [ 4849.088907] state change SNK_STARTUP -> SNK_DISCOVERY [ 4849.088915] Setting voltage/current limit 5000 mV 0 mA [ 4849.088927] vbus=0 charge:=1 [ 4849.090505] state change SNK_DISCOVERY -> SNK_WAIT_CAPABILITIES [ 4849.090828] pending state change SNK_WAIT_CAPABILITIES -> SNK_READY @240 ms [ 4849.335878] state change SNK_WAIT_CAPABILITIES -> SNK_READY [delayed240 ms] this patch fix this issue by clear hard_reset_count at any cases of cc disconnect, í.e. don't check port->attached flag. Fixes: 4b4e02c8 ("typec: tcpm: Move out of staging") Cc: stable@vger.kernel.org Reported-and-tested-by: NChiYuan Huang <cy_huang@richtek.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Reviewed-by: NHeikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: NLi Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/1602500592-3817-1-git-send-email-jun.li@nxp.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jerome Brunet 提交于
Commit a4e7279c ("cdc-acm: introduce a cool down") is causing regression if there is some USB error, such as -EPROTO. This has been reported on some samples of the Odroid-N2 using the Combee II Zibgee USB dongle. > struct acm *acm = container_of(work, struct acm, work) is incorrect in case of a delayed work and causes warnings, usually from the workqueue: > WARNING: CPU: 0 PID: 0 at kernel/workqueue.c:1474 __queue_work+0x480/0x528. When this happens, USB eventually stops working completely after a while. Also the ACM_ERROR_DELAY bit is never set, so the cooldown mechanism previously introduced cannot be triggered and acm_submit_read_urb() is never called. This changes makes the cdc-acm driver use a single delayed work, fixing the pointer arithmetic in acm_softint() and set the ACM_ERROR_DELAY when the cooldown mechanism appear to be needed. Fixes: a4e7279c ("cdc-acm: introduce a cool down") Cc: Oliver Neukum <oneukum@suse.com> Reported-by: NPascal Vizeli <pascal.vizeli@nabucasa.com> Acked-by: NOliver Neukum <oneukum@suse.com> Signed-off-by: NJerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20201019170702.150534-1-jbrunet@baylibre.com Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ran Wang 提交于
fsl_usb2_device_register() should stop init if dma_set_mask() return error. Fixes: cae05861 ("drivers/usb/host: fsl: Set DMA_MASK of usb platform device") Reviewed-by: NPeter Chen <peter.chen@nxp.com> Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Link: https://lore.kernel.org/r/20201010060308.33693-1-ran.wang_1@nxp.com Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Mauro Carvalho Chehab 提交于
There is a common comment marked, instead, with kernel-doc notation. Also, some identifiers have different names between their prototypes and the kernel-doc markup. Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: NFelipe Balbi <balbi@kernel.org> Link: https://lore.kernel.org/r/0b964be3884def04fcd20ea5c12cb90d0014871c.1603469755.git.mchehab+huawei@kernel.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dan Carpenter 提交于
These variables are enums but in this situation GCC will treat them as unsigned so the conditions are never true. Fixes: da0cb631 ("usb: typec: add support for STUSB160x Type-C controller family") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201023112412.GD282278@mwandaSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 26 10月, 2020 16 次提交
-
-
由 Linus Torvalds 提交于
-
由 Joe Perches 提交于
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.plSigned-off-by: NJoe Perches <joe@perches.com> Reviewed-by: NNick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: NMiguel Ojeda <ojeda@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rasmus Villemoes 提交于
tid_addr is not a "pointer to (pointer to int in userspace)"; it is in fact a "pointer to (pointer to int in userspace) in userspace". So sparse rightfully complains about passing a kernel pointer to put_user(). Reported-by: Nkernel test robot <lkp@intel.com> Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Biggers 提交于
Commit 453431a5 ("mm, treewide: rename kzfree() to kfree_sensitive()") renamed kzfree() to kfree_sensitive(), but it left a compatibility definition of kzfree() to avoid being too disruptive. Since then a few more instances of kzfree() have slipped in. Just get rid of them and remove the compatibility definition once and for all. Signed-off-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
If set, use the environment variable GIT_DIR to change the default .git location of the kernel git tree. If GIT_DIR is unset, keep using the current ".git" default. Link: https://lkml.kernel.org/r/c5e23b45562373d632fccb8bc04e563abba4dd1d.camel@perches.comSigned-off-by: NJoe Perches <joe@perches.com> Tested-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fixes from Thomas Gleixner: "A time namespace fix and a matching selftest. The futex absolute timeouts which are based on CLOCK_MONOTONIC require time namespace corrected. This was missed in the original time namesapce support" * tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: selftests/timens: Add a test for futex() futex: Adjust absolute futex timeouts with per time namespace offset
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes from Thomas Gleixner: "Two scheduler fixes: - A trivial build fix for sched_feat() to compile correctly with CONFIG_JUMP_LABEL=n - Replace a zero lenght array with a flexible array" * tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/features: Fix !CONFIG_JUMP_LABEL case sched: Replace zero-length array with flexible-array
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fix from Thomas Gleixner: "A single fix to compute the field offset of the SNOOPX bit in the data source bitmask of perf events correctly" * tag 'perf-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: correct SNOOPX field offset
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking fix from Thomas Gleixner: "Just a trivial fix for kernel-doc warnings" * tag 'locking-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/seqlocks: Fix kernel-doc warnings
-
git://github.com/jonmason/ntb由 Linus Torvalds 提交于
Pull NTB fixes from Jon Mason. * tag 'ntb-5.10' of git://github.com/jonmason/ntb: NTB: Use struct_size() helper in devm_kzalloc() ntb: intel: Fix memleak in intel_ntb_pci_probe NTB: hw: amd: fix an issue about leak system resources
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fix from Wolfram Sang: "Regression fix for rc1 and stable kernels as well" * 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull more cifs updates from Steve French: "Add support for stat of various special file types (WSL reparse points for char, block, fifo)" * tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number smb3: add some missing definitions from MS-FSCC smb3: remove two unused variables smb3: add support for stat of WSL reparse points for special file types
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull more parisc updates from Helge Deller: - During this merge window O_NONBLOCK was changed to become 000200000, but we missed that the syscalls timerfd_create(), signalfd4(), eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict bit-wise check of the flags parameter. To provide backward compatibility with existing userspace we introduce parisc specific wrappers for those syscalls which filter out the old O_NONBLOCK value and replaces it with the new one. - Prevent HIL bus driver to get stuck when keyboard or mouse isn't attached - Improve error return codes when setting rtc time - Minor documentation fix in pata_ns87415.c * 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: ata: pata_ns87415.c: Document support on parisc with superio chip parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage hil/parisc: Disable HIL driver when it gets stuck parisc: Improve error return codes when setting rtc time
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull more xen updates from Juergen Gross: - a series for the Xen pv block drivers adding module parameters for better control of resource usge - a cleanup series for the Xen event driver * tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Documentation: add xen.fifo_events kernel parameter description xen/events: unmask a fifo event channel only if it was masked xen/events: only register debug interrupt for 2-level events xen/events: make struct irq_info private to events_base.c xen: remove no longer used functions xen-blkfront: Apply changed parameter name to the document xen-blkfront: add a parameter for disabling of persistent grants xen-blkback: add a parameter for disabling of persistent grants
-
git://github.com/micah-morton/linux由 Linus Torvalds 提交于
Pull SafeSetID updates from Micah Morton: "The changes are mostly contained to within the SafeSetID LSM, with the exception of a few 1-line changes to change some ns_capable() calls to ns_capable_setid() -- causing a flag (CAP_OPT_INSETID) to be set that is examined by SafeSetID code and nothing else in the kernel. The changes to SafeSetID internally allow for setting up GID transition security policies, as already existed for UIDs" * tag 'safesetid-5.10' of git://github.com/micah-morton/linux: LSM: SafeSetID: Fix warnings reported by test bot LSM: SafeSetID: Add GID security policy handling LSM: Signal to SafeSetID when setting group IDs
-
git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/prandom由 Linus Torvalds 提交于
Pull random32 updates from Willy Tarreau: "Make prandom_u32() less predictable. This is the cleanup of the latest series of prandom_u32 experimentations consisting in using SipHash instead of Tausworthe to produce the randoms used by the network stack. The changes to the files were kept minimal, and the controversial commit that used to take noise from the fast_pool (f227e3ec) was reverted. Instead, a dedicated "net_rand_noise" per_cpu variable is fed from various sources of activities (networking, scheduling) to perturb the SipHash state using fast, non-trivially predictable data, instead of keeping it fully deterministic. The goal is essentially to make any occasional memory leakage or brute-force attempt useless. The resulting code was verified to be very slightly faster on x86_64 than what is was with the controversial commit above, though this remains barely above measurement noise. It was also tested on i386 and arm, and build- tested only on arm64" Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ * tag '20201024-v4-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/prandom: random32: add a selftest for the prandom32 code random32: add noise from network and scheduling activity random32: make prandom_u32() output unpredictable
-
- 25 10月, 2020 10 次提交
-
-
由 Hans de Goede 提交于
Commit 21653a41 ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()")'s intention was to only move the acpi_install_address_space_handler() call to the point before where the ACPI declared i2c-children of the adapter where instantiated by i2c_acpi_register_devices(). But i2c_acpi_install_space_handler() had a call to acpi_walk_dep_device_list() hidden (that is I missed it) at the end of it, so as an unwanted side-effect now acpi_walk_dep_device_list() was also being called before i2c_acpi_register_devices(). Move the acpi_walk_dep_device_list() call to the end of i2c_acpi_register_devices(), so that it is once again called *after* the i2c_client-s hanging of the adapter have been created. This fixes the Microsoft Surface Go 2 hanging at boot. Fixes: 21653a41 ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()") Link: https://bugzilla.kernel.org/show_bug.cgi?id=209627Reported-by: NRainer Finke <rainer@finke.cc> Reported-by: NKieran Bingham <kieran.bingham@ideasonboard.com> Suggested-by: NMaximilian Luz <luzmaximilian@gmail.com> Tested-by: NKieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NWolfram Sang <wsa@kernel.org>
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: - NVMe pull request from Christoph - rdma error handling fixes (Chao Leng) - fc error handling and reconnect fixes (James Smart) - fix the qid displace when tracing ioctl command (Keith Busch) - don't use BLK_MQ_REQ_NOWAIT for passthru (Chaitanya Kulkarni) - fix MTDT for passthru (Logan Gunthorpe) - blacklist Write Same on more devices (Kai-Heng Feng) - fix an uninitialized work struct (zhenwei pi)" - lightnvm out-of-bounds fix (Colin) - SG allocation leak fix (Doug) - rnbd fixes (Gioh, Guoqing, Jack) - zone error translation fixes (Keith) - kerneldoc markup fix (Mauro) - zram lockdep fix (Peter) - Kill unused io_context members (Yufen) - NUMA memory allocation cleanup (Xianting) - NBD config wakeup fix (Xiubo) * tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block: (27 commits) block: blk-mq: fix a kernel-doc markup nvme-fc: shorten reconnect delay if possible for FC nvme-fc: wait for queues to freeze before calling update_hr_hw_queues nvme-fc: fix error loop in create_hw_io_queues nvme-fc: fix io timeout to abort I/O null_blk: use zone status for max active/open nvmet: don't use BLK_MQ_REQ_NOWAIT for passthru nvmet: cleanup nvmet_passthru_map_sg() nvmet: limit passthru MTDS by BIO_MAX_PAGES nvmet: fix uninitialized work for zero kato nvme-pci: disable Write Zeroes on Sandisk Skyhawk nvme: use queuedata for nvme_req_qid nvme-rdma: fix crash due to incorrect cqe nvme-rdma: fix crash when connect rejected block: remove unused members for io_context blk-mq: remove the calling of local_memory_node() zram: Fix __zram_bvec_{read,write}() locking order skd_main: remove unused including <linux/version.h> sgl_alloc_order: fix memory leak lightnvm: fix out-of-bounds write to array devices->info[] ...
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull io_uring fixes from Jens Axboe: - fsize was missed in previous unification of work flags - Few fixes cleaning up the flags unification creds cases (Pavel) - Fix NUMA affinities for completely unplugged/replugged node for io-wq - Two fallout fixes from the set_fs changes. One local to io_uring, one for the splice entry point that io_uring uses. - Linked timeout fixes (Pavel) - Removal of ->flush() ->files work-around that we don't need anymore with referenced files (Pavel) - Various cleanups (Pavel) * tag 'io_uring-5.10-2020-10-24' of git://git.kernel.dk/linux-block: splice: change exported internal do_splice() helper to take kernel offset io_uring: make loop_rw_iter() use original user supplied pointers io_uring: remove req cancel in ->flush() io-wq: re-set NUMA node affinities if CPUs come online io_uring: don't reuse linked_timeout io_uring: unify fsize with def->work_flags io_uring: fix racy REQ_F_LINK_TIMEOUT clearing io_uring: do poll's hash_node init in common code io_uring: inline io_poll_task_handler() io_uring: remove extra ->file check in poll prep io_uring: make cached_cq_overflow non atomic_t io_uring: inline io_fail_links() io_uring: kill ref get/drop in personality init io_uring: flags-based creds init in queue
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull libata fixes from Jens Axboe: "Two minor libata fixes: - Fix a DMA boundary mask regression for sata_rcar (Geert) - kerneldoc markup fix (Mauro)" * tag 'libata-5.10-2020-10-24' of git://git.kernel.dk/linux-block: ata: fix some kernel-doc markups ata: sata_rcar: Fix DMA boundary mask
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull misc vfs updates from Al Viro: "Assorted stuff all over the place (the largest group here is Christoph's stat cleanups)" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: remove KSTAT_QUERY_FLAGS fs: remove vfs_stat_set_lookup_flags fs: move vfs_fstatat out of line fs: implement vfs_stat and vfs_lstat in terms of vfs_fstatat fs: remove vfs_statx_fd fs: omfs: use kmemdup() rather than kmalloc+memcpy [PATCH] reduce boilerplate in fsid handling fs: Remove duplicated flag O_NDELAY occurring twice in VALID_OPEN_FLAGS selftests: mount: add nosymfollow tests Add a "nosymfollow" mount option.
-
git://git.infradead.org/users/hch/dma-mapping由 Linus Torvalds 提交于
Pull dma-mapping fixes from Christoph Hellwig: - document the new dma_{alloc,free}_pages() API - two fixups for the dma-mapping.h split * tag 'dma-mapping-5.10-1' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: document dma_{alloc,free}_pages dma-mapping: move more functions to dma-map-ops.h ARM/sa1111: add a missing include of dma-map-ops.h
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Paolo Bonzini: "Two fixes for this merge window, and an unrelated bugfix for a host hang" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: ioapic: break infinite recursion on lazy EOI KVM: vmx: rename pi_init to avoid conflict with paride KVM: x86/mmu: Avoid modulo operator on 64-bit value to fix i386 build
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 SEV-ES fixes from Borislav Petkov: "Three fixes to SEV-ES to correct setting up the new early pagetable on 5-level paging machines, to always map boot_params and the kernel cmdline, and disable stack protector for ../compressed/head{32,64}.c. (Arvind Sankar)" * tag 'x86_seves_fixes_for_v5.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot/64: Explicitly map boot_params and command line x86/head/64: Disable stack protection for head$(BITS).o x86/boot/64: Initialize 5-level paging variables earlier
-
由 Willy Tarreau 提交于
Given that this code is new, let's add a selftest for it as well. It doesn't rely on fixed sets, instead it picks 1024 numbers and verifies that they're not more correlated than desired. Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ Cc: George Spelvin <lkml@sdf.org> Cc: Amit Klein <aksecurity@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: tytso@mit.edu Cc: Florian Westphal <fw@strlen.de> Cc: Marc Plumb <lkml.mplumb@gmail.com> Signed-off-by: NWilly Tarreau <w@1wt.eu>
-
由 Willy Tarreau 提交于
With the removal of the interrupt perturbations in previous random32 change (random32: make prandom_u32() output unpredictable), the PRNG has become 100% deterministic again. While SipHash is expected to be way more robust against brute force than the previous Tausworthe LFSR, there's still the risk that whoever has even one temporary access to the PRNG's internal state is able to predict all subsequent draws till the next reseed (roughly every minute). This may happen through a side channel attack or any data leak. This patch restores the spirit of commit f227e3ec ("random32: update the net random state on interrupt and activity") in that it will perturb the internal PRNG's statee using externally collected noise, except that it will not pick that noise from the random pool's bits nor upon interrupt, but will rather combine a few elements along the Tx path that are collectively hard to predict, such as dev, skb and txq pointers, packet length and jiffies values. These ones are combined using a single round of SipHash into a single long variable that is mixed with the net_rand_state upon each invocation. The operation was inlined because it produces very small and efficient code, typically 3 xor, 2 add and 2 rol. The performance was measured to be the same (even very slightly better) than before the switch to SipHash; on a 6-core 12-thread Core i7-8700k equipped with a 40G NIC (i40e), the connection rate dropped from 556k/s to 555k/s while the SYN cookie rate grew from 5.38 Mpps to 5.45 Mpps. Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ Cc: George Spelvin <lkml@sdf.org> Cc: Amit Klein <aksecurity@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: tytso@mit.edu Cc: Florian Westphal <fw@strlen.de> Cc: Marc Plumb <lkml.mplumb@gmail.com> Tested-by: NSedat Dilek <sedat.dilek@gmail.com> Signed-off-by: NWilly Tarreau <w@1wt.eu>
-