Currently symbol resolution does not work for 64-bit programs on architectures
that use function descriptors such as ppc64.

The problem is that a symbol doesn't point to a text address, it points to a
data area that contains (amongst other things) a pointer to the text address.

We look for a section called ".opd" which is the function descriptor area. To
create the full symbol table, when we see a symbol in the function descriptor
section we load the first pointer and use that as the text address.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1276523793-15422-1-git-send-email-ebmunson@us.ibm.com>
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NEric B Munson <ebmunson@us.ibm.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We need to set the long name to the name specified via, for instance,
'perf annotate --vmlinux /path/to/vmlinux', if not it will remain as
'[kernel.kallsyms]' and that will make annotate fail when passing this
as the vmlinux name in the call to objdump.

The way this is setup grew unwieldly and dso__load_vmlinux is the
function that should allocate space for the long name, with callers not
assuming that filenames should be allocated somehow by then (strdup,
dso__build_id_filename, etc).

For now this is the minimalistic patch, a proper fix for .36 will be
made.
Reported-by: NStephane Eranian <eranian@google.com>
Tested-by: NStephane Eranian <eranian@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20100604003900.GD10469@ghostprotocols.net>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that if the kernel DSO has a build id because record inserted it in
the perf.data build id table in the header, or a BUILD_ID event was
inserted in the stream, we first look at the build id cache
($HOME/.debug/).

If we find it there, try to use it, allowing offline annotation in
addition to 'perf report'.
Reported-by: NStephane Eranian <eranian@google.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We were still using the pathname found on the MMAP event, that could not
be the one we used when recording, so use the build-id cache for that,
only falling back to use the pathname in the MMAP event if no build-ids
are available.

With this we now also are able to do secure, seamless offline annotation.

Example:

[root@doppio linux-2.6-tip]# perf report -g none -v 2> /dev/null | head -10
     8.12%     Xorg  /usr/lib64/libpixman-1.so.0.14.0       0x0000000000026d02 B [.] pixman_rasterize_edges
     4.68%  firefox  /usr/lib64/xulrunner-1.9.1/libxul.so   0x00000000005dbdba B [.] 0x000000005dbdba
     3.70%  swapper  /lib/modules/2.6.34-rc6/build/vmlinux  0xffffffff81022cea ! [k] read_hpet
     2.96%     init  /lib/modules/2.6.34-rc6/build/vmlinux  0xffffffff81022cea ! [k] read_hpet
     2.73%  swapper  /lib/modules/2.6.34-rc6/build/vmlinux  0xffffffff8100a738 ! [k] mwait_idle_with_hints
[root@doppio linux-2.6-tip]# perf annotate -v pixman_rasterize_edges 2>&1 | grep Executing
Executing: objdump --start-address=0x000000371ce26670 --stop-address=0x000000371ce2709f -dS /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|grep -v /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|expand
[root@doppio linux-2.6-tip]# perf buildid-list | grep libpixman-1.so.0.14.0
bd6ac5199137aaeb279f864717d8d061477466c1 /usr/lib64/libpixman-1.so.0.14.0
[root@doppio linux-2.6-tip]#
Reported-by: NStephane Eranian <eranian@google.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The changes made to support host and guest machines in a session, that
started when the 'perf kvm' tool was introduced ended up introducing a
bug where the host_machine was not having its DSOs traversed for
build-id processing.

Fix it by moving some methods to the right classes and considering the
host_machine when processing build-ids.
Reported-by: NTom Zanussi <tzanussi@gmail.com>
Reported-by: NStephane Eranian <eranian@google.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In __dsos__read_build_ids if the dso already had its build-id read,
don't try again.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

That happened for an old perf.data file that had no fake MMAP events for
the kernel modules, but even then it should warn once for each module,
not one time for every symbol in every module not found.
Reported-by: NIngo Molnar <mingo@elte.hu>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Better done when we are adding entries, be it initially of when we're
re-sorting the histograms.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We have just one host on a given session, and that is the most common
setup right now, so embed a ->host_machine struct machine instance
directly in the perf_session class, check if we're looking for it before
going to the rb_tree.

This also fixes a problem found when we try to process old perf.data
files where we didn't have MMAP events for the kernel and modules and
thus don't create the kernel maps, do it in event__preprocess_sample if
it wasn't already.
Reported-by: NIngo Molnar <mingo@elte.hu>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Created when writing the first 'perf test' regression testing routine.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Now those methods don't operate on a global list of dsos, but on lists
of machines, so make this clear by renaming the functions.

Cc: Avi Kivity <avi@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Those functions operated on members now grouped in 'struct machine', so
move those methods to this new class.

The changes made to 'perf probe' shows that using this abstraction
inserting probes on guests almost got supported for free.

Cc: Avi Kivity <avi@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Don't blindly assume that the size of the buffer is enough, use
snprintf.

Cc: Avi Kivity <avi@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

struct kernel_info and kerninfo__ are too vague, what they really
describe are machines, virtual ones or hosts.

There are more changes to introduce helpers to shorten function calls
and to make more clear what is really being done, but I left that for
subsequent patches.

Cc: Avi Kivity <avi@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If dso->node member is not initialized, it causes a segmentation fault when
adding to other lists.

It should be initilized in dso__new().
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: : <20100421195616.24664.89980.stgit@localhost6.localdomain6>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Here is the patch of userspace perf tool.
Signed-off-by: NZhang Yanmin <yanmin_zhang@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Mostly used in symbol.c so move them there to reduce the number
of files needed to use the symbol system.

Also do some header adjustments with the same intent.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1269557941-15617-5-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When profiling C++ workloads the symbol name length can be
really big, so cap it before it garbles the result.

This builds upon the autosizing already present where we choose
to use the short, basename of DSOs instead of its long, full
pathname.
Reported-by: NPavel Krauz <krauz@cngroup.cz>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1268676230-9261-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Before this patch this message would very briefly appear on the
screen and then the screen would get updates only on the top,
for number of interrupts received, etc, but no annotation would
be performed:

 [root@doppio linux-2.6-tip]# perf top -s n_tty_write > /tmp/bla
 objdump: '[kernel.kallsyms]': No such file

Now this is what the user gets:

 [root@doppio linux-2.6-tip]# perf top -s n_tty_write
 Can't annotate n_tty_write: No vmlinux file was found in the
 path: [0] vmlinux
 [1] /boot/vmlinux
 [2] /boot/vmlinux-2.6.33-rc5
 [3] /lib/modules/2.6.33-rc5/build/vmlinux
 [4] /usr/lib/debug/lib/modules/2.6.33-rc5/vmlinux
 [root@doppio linux-2.6-tip]#

This bug was introduced when we added automatic search for
vmlinux, before that time the user had to specify a vmlinux
file.
Reported-by: NDavid S. Miller <davem@davemloft.net>
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: <stable@kernel.org>
LKML-Reference: <1268664418-28328-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1268349164-5822-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Because symbol->end is not fixed up at symbol_filter time, only
after all symbols for a DSO are loaded, and that, for asm
symbols, may be bogus, causing segfaults when hits happen in
these symbols.
Reported-by: NDavid Miller <davem@davemloft.net>
Reported-by: NAnton Blanchard <anton@samba.org>
Acked-by: NDavid Miller <davem@davemloft.net>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: <stable@kernel.org> # for .33.x. Does not apply cleanly, needs backport.
LKML-Reference: <20100225155740.GB8553@ghostprotocols.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Be more clear about DSO long names and tell from which file
kernel symbols were obtained, all in --verbose mode:

    [root@mica ~]# perf report -v > /dev/null
    Looking at the vmlinux_path (5 entries long)
    Using /lib/modules/2.6.33-rc8-tip-00777-g0918527-dirty/build/vmlinux for symbols
    [root@mica ~]# mv /lib/modules/2.6.33-rc8-tip-00777-g0918527-dirty/build/vmlinux /tmp/dd
    [root@mica ~]# perf report -v > /dev/null
    Looking at the vmlinux_path (5 entries long)
    Using /proc/kallsyms for symbols
    [root@mica ~]#
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1266866139-6361-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In function dso__split_kallsyms(), curr_map saves the return value
of map__new2. So check it instead of var map after the call returns.
Signed-off-by: NZhang Yanmin <yanmin_zhang@linux.intel.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: <stable@kernel.org> # for .33.x
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1267066851.1726.9.camel@localhost>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In 2161db96 we stopped failing when not finding modules when
asked too, but then the kernel maps (just one, for vmlinux)
wasn't having its ->end field correctly set up, so symbols were
not being found for the vmlinux map because its range was 0-0.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1266702793-29434-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

perf top and perf record refuses to initialize on non-modular kernels:
refuse to initialize:

 $ perf top -v
  map_groups__set_modules_path_dir: cannot open /lib/modules/2.6.33-rc6-tip-00586-g398dde3-dirty/

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Not to pollute too much 'perf annotate' debugging sessions.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-7-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We want to stream events as fast as possible to perf.data, and
also in the future we want to have splice working, when no
interception will be possible.

Using build_id__mark_dso_hit_ops to create the list of DSOs that
back MMAPs we also optimize disk usage in the build-id cache by
only caching DSOs that had hits.
Suggested-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-6-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We can check using strcmp, most DSOs don't start with '[' so the
test is cheap enough and we had to test it there anyway since
when reading perf.data files we weren't calling the routine that
created this global variable and thus weren't setting it as
"loaded", which was causing a bogus:

  Failed to open [vdso], continuing without symbols

Message as the first line of 'perf report'.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-3-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

While debugging a problem reported by Pekka Enberg by printing
the IP and all the maps for a thread when we don't find a map
for an IP I noticed that dso__load_sym needs to fixup these
extra maps it creates to hold symbols in different ELF sections
than the main kernel one.

Now we're back showing things like:

[root@doppio linux-2.6-tip]# perf report | grep vsyscall
     0.02%             mutt  [kernel.kallsyms].vsyscall_fn  [.] vread_hpet
     0.01%            named  [kernel.kallsyms].vsyscall_fn  [.] vread_hpet
     0.01%   NetworkManager  [kernel.kallsyms].vsyscall_fn  [.] vread_hpet
     0.01%         gconfd-2  [kernel.kallsyms].vsyscall_0   [.] vgettimeofday
     0.01%  hald-addon-rfki  [kernel.kallsyms].vsyscall_fn  [.] vread_hpet
     0.00%      dbus-daemon  [kernel.kallsyms].vsyscall_fn  [.] vread_hpet
[root@doppio linux-2.6-tip]#
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

I noticed while writing the first test in 'perf regtest' that to
just test the symbol handling routines one needs to create a
perf session, that is a layer centered on a perf.data file,
events, etc, so I untied these layers.

This reduces the complexity for the users as the number of
parameters to most of the symbols and session APIs now was
reduced while not adding more state to all the map instances by
only having data that is needed to split the kernel (kallsyms
and ELF symtab sections) maps and do vmlinux relocation on the
main kernel map.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

To make it clear and allow for direct usage by, for instance,
regression test suites.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1264633557-17597-3-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

So that we can call it directly from regression tests, and also
to reduce the size of dso__load_kernel_sym(), making it more
clear.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1264633557-17597-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Probably this wasn't noticed when testing this on my parisc
machine because I must have copied manually to its cache the
vmlinux file used in the x86_64 machine, now that I tried
looking on a x86-32 machine with a fresh cache, kernel symbols
weren't being resolved even with the right kallsyms copy on its
cache, duh.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1264178102-4203-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Only if we parsed /proc/kallsyms (or a copy found in the buildid
cache) we should set the dso long name to "[kernel.kallsyms]".
Reported-by: NMike Galbraith <efault@gmx.de>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1264178102-4203-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

For now it just has operations to examine a given file, find its
build-id and add or remove it to/from the cache.

Useful, for instance, when adding binaries sent together with a
perf.data file, so that we can add them to the cache and have
the tools find it when resolving symbols.

It'll also manage the size of the cache like 'ccache' does.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1264008525-29025-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Found while analysing a perf.data file collected on an ARM
machine where an explicitely specified vmlinux was being
disregarded.
Reported-by: NJamie Iles <jamie.iles@picochip.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263904574-30732-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Using this option 'perf buildid-list' will process all samples,
marking the DSOs that had some hits to list just them.

This in turn will be used by a new porcelain, 'perf archive',
that will be just a shell script to create a tarball from the
'perf buildid-list --with-hits' output and the files cached by
'perf record' in ~/.debug.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263519930-22803-4-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If not we end up duplicating the module DSOs because first we
insert them using the short name found in /proc/modules, then,
when processing synthesized MMAP events we add them again.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263519930-22803-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

So that when we don't have a vmlinux handy we can store the
kallsyms for later use by 'perf report'.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263501006-14185-3-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Now a perf.data file collected on a x86_64 fedora 12 machine
gets properly parsed on a Debian testing PARISC64 machine with
32-bit userland:

  acme@parisc:~/git/linux-2.6-tip$ perf report 2> /dev/null | head -15
  # Samples: 293085637
  #
  # Overhead          Command                      Shared Object  Symbol
  # ........  ...............  .................................  ......
  #
      35.11%             find  [kernel.kallsyms]                  [k] 0xffffffff81002b5a
      18.25%             perf  [kernel.kallsyms]                  [k] 0xffffffff8102235f
       9.07%             find  find                               [.] 0x0000000000fb0e
       5.80%          swapper  [kernel.kallsyms]                  [k] 0xffffffff8102235f
       3.29%             perf  libc-2.10.2.so                     [.] __GI_strcmp
       2.70%             find  libc-2.10.2.so                     [.] __GI_memmove
       2.33%             init  [kernel.kallsyms]                  [k] 0xffffffff810091b9
       2.03%             find  libc-2.10.2.so                     [.] _int_malloc
       1.67%             find  libc-2.10.2.so                     [.] _IO_vfprintf_internal
       1.65%             sshd  libcrypto.so.0.9.8k                [.] 0x00000000105440
  acme@parisc:~/git/linux-2.6-tip$
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263501006-14185-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>