Duplicated const, only one is required.  Also reformat line to ensure
it is less than 80 columns wide.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453287574-3645-1-git-send-email-colin.king@canonical.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When no console framebuffer is enabled, the default plane state is
defined by plane reset function. If driver uses generic helper, then
rotation property is set to zero. This is not a valid value for that
enum. This patch sets default rotation value to DRM_ROTATE_0.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453192008-13283-1-git-send-email-m.szyprowski@samsung.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

One of the two local variables old_crtc_state is redundantly defined in the
function disable_outputs().  It has only a scope partway through the block
for_each_connector_in_state.  So, let's remove it and use the one which
has the scope within the function disable_outputs().
Signed-off-by: NLiu Ying <gnuiyl@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453088195-2564-1-git-send-email-gnuiyl@gmail.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We've done sanity NULL pointer check on set->mode at the beginning of
drm_crtc_helper_set_config() and bailed out if necessary, thus any later on
check is redundant.
Signed-off-by: NLiu Ying <gnuiyl@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452751210-19216-2-git-send-email-gnuiyl@gmail.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We've done sanity NULL pointer check on set->fb at the beginning of
drm_crtc_helper_set_config() and bailed out if necessary, thus any later on
check or case handling is redundant.
Signed-off-by: NLiu Ying <gnuiyl@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452751210-19216-1-git-send-email-gnuiyl@gmail.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Merge tag 'drm-intel-next-fixes-2016-01-14' of git://anongit.freedesktop.org/drm-intel into drm-next

misc i915 fixes all over the place.

* tag 'drm-intel-next-fixes-2016-01-14' of git://anongit.freedesktop.org/drm-intel:
  drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page
  drm/i915: Widen return value for reservation_object_wait_timeout_rcu to long.
  drm/i915: intel_hpd_init(): Fix suspend/resume reprobing
  drm/i915: shut up gen8+ SDE irq dmesg noise, again
  drm/i915: Restore inhibiting the load of the default context
  drm/i915: Tune down rpm wakelock debug checks
  drm/i915: Avoid writing relocs with addresses in non-canonical form
  drm/i915: Move Braswell stop_machine GGTT insertion workaround

Since your main drm-next pull isn't out of the door yet I figured I might
as well flush out drm-misc instead of delaying for 4.6. It's really just
random stuff all over, biggest thing probably connector_mask tracking from
Maarten.

* tag 'topic/drm-misc-2016-01-17' of git://anongit.freedesktop.org/drm-intel: (24 commits)
  drm/fb_cma_helper: Remove implicit call to disable_unused_functions
  drm/sysfs: use kobj_to_dev()
  drm/i915: Init power domains early in driver load
  drm: Do not set connector->encoder in drivers
  apple-gmux: Add initial documentation
  drm: move MODULE_PARM_DESC to other file
  drm/edid: index CEA/HDMI mode tables using the VIC
  drm/atomic: Remove drm_atomic_connectors_for_crtc.
  drm/i915: Update connector_mask during readout, v2.
  drm: Remove opencoded drm_gem_object_release_handle()
  drm: Do not set outparam on error during GEM handle allocation
  drm/docs: more leftovers from the big vtable documentation pile
  drm/atomic-helper: Reject legacy flips on a disabled pipe
  drm/atomic: add connector mask to drm_crtc_state.
  drm/tegra: Use __drm_atomic_helper_reset_connector for subclassing connector state, v2.
  drm/atomic: Add __drm_atomic_helper_connector_reset, v2.
  drm/i915: Set connector_state->connector using the helper.
  drm: Use a normal idr allocation for the obj->name
  drm: Only bump object-reference count when adding first handle
  drm: Balance error path for GEM handle allocation
  ...

The drm_fbdev_cma_init function always calls the
drm_helper_disable_unused_functions. Since it's part of the usual probe
process, all the drivers using that helper will end up having their encoder
and CRTC disable functions called at probe if their device has not been
reported as enabled.

This could be fixed by reading out from the registers the current state of
the device if it is enabled, but even that will not handle the case where
the device is actually disabled.

Moreover, the drivers using the atomic modesetting expect that their enable
and disable callback to be called when the device is already enabled or
disabled (respectively).

We can however fix this issue by moving the call to
drm_helper_disable_unused_functions out of drm_fbdev_cma_init and make the
drivers needing it (all the drivers calling drm_fbdev_cma_init and not
using the atomic modesetting) explicitly call it.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452785109-6172-14-git-send-email-maxime.ripard@free-electrons.comAcked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

this fixes the build on arm.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

 This 2nd pull request includes the following,
   - add configurable plane support and relevant cleanups.
   - fixup kernel panic issue at drm releasing.
   - remove unnecessary codes.

   This has been delayed to resolve a critical issue - which incurrs
   a kernel panic when driver is released - and review it.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: fix kernel panic issue at drm releasing
  drm/exynos: crtc: do not wait for the scanout completion
  drm/exynos: mixer: properly update all planes on the same vblank event
  drm/exynos: crtc: rework atomic_{begin,flush}
  drm/exynos: mixer: unify a check for video-processor window
  drm/exynos: mixer: also allow ARGB1555 and ARGB4444
  drm/exynos: mixer: refactor layer setup
  drm/exynos: mixer: remove all static blending setup
  drm/exynos: mixer: set window priority based on zpos
  drm/exynos: make zpos property configurable
  drm/exynos: rename zpos to index

etnaviv fixes.

* 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux:
  drm/etnaviv: fix workaround for GC500
  drm/etnaviv: unlock on error in etnaviv_gem_get_iova()

Merge branch 'drm-rockchip-next-2016-01-06' of https://github.com/markyzq/kernel-drm-rockchip into drm-next

new rockchip bits.

* 'drm-rockchip-next-2016-01-06' of https://github.com/markyzq/kernel-drm-rockchip:
  drm: rockchip: Support Synopsys DW MIPI DSI
  Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver
  drm/rockchip: return a true clock rate to adjusted_mode

When the framebuffer is a vmwgfx dma buffer and a proxy surface is
created, the vmw_kms_update_proxy() function requires that the proxy
surface width and the framebuffer pitch are compatible, otherwise
display corruption occurs as seen in gnome-shell/native with software
3D. Since the framebuffer pitch is determined by user-space, allocate
a proxy surface the width of which is based on the framebuffer pitch
rather than on the framebuffer width.

Cc: <stable@vger.kernel.org>
Reported-by: NRaphael Hertzog <buxy@kali.org>
Tested-by: NMati Aharoni <muts@kali.org>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NBrian Paul <brianp@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

With CONFIG_SMP=n and CONFIG_DEBUG_SPINLOCK=y the vmwgfx kernel module
would unconditionally throw a bug when checking for a held spinlock
in the command buffer code. Fix this by using a lockdep check.

Cc: <stable@vger.kernel.org>
Reported-and-tested-by: NTetsuo Handa <penguin-kernel@i-love-sakura.ne.jp>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The new debugfs initialization code fails to build when CONFIG_DEBUG_FS
is disabled:

In file included from /git/arm-soc/drivers/gpu/drm/nouveau/nouveau_drm.c:57:0:
drivers/gpu/drm/nouveau/nouveau_debugfs.h: In function 'nouveau_debugfs_init':
drivers/gpu/drm/nouveau/nouveau_debugfs.h:37:29: error: parameter name omitted
 nouveau_debugfs_init(struct nouveau_drm *)

This fixes the prototypes so we can build it again.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: b126a200 ("drm/nouveau/debugfs: we need a ctrl object for debugfs")
Signed-off-by: NDave Airlie <airlied@redhat.com>

v2: remove unneeded pci check
Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

A few more misc things for radeon and amdgpu for 4.5:
- TTM fixes for imported buffers
- amdgpu fixes to avoid -ENOMEM in CS ioctl
- CZ UVD and VCE clock force options for debugging video issues
- A couple of ACP prerequisites
- Misc fixes

* 'drm-next-4.5' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: validate duplicates first
  drm/amdgpu: move VM page tables to the LRU end on CS v2
  drm/ttm: add ttm_bo_move_to_lru_tail function v2
  drm/ttm: fix adding foreign BOs to the swap LRU
  drm/ttm: fix adding foreign BOs to the LRU during init v2
  drm/radeon: use kobj_to_dev()
  drm/amdgpu: use kobj_to_dev()
  drm/amdgpu/cz: force vce clocks when sclks are forced
  drm/amdgpu/cz: force uvd clocks when sclks are forced
  drm/amdgpu/cz: add code to enable forcing VCE clocks
  drm/amdgpu/cz: add code to enable forcing UVD clocks
  drm/amdgpu: fix lost sync_to if scheduler is enabled.
  drm/amd/powerplay: fix static checker warning for return meaningless value.
  drm/amdgpu: add irq domain support
  drm/amdgpu/cgs: add an interface to access PCI resources

Most VM BOs end up in the duplicates list, validate it
first make -ENOMEM less likely.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <David1.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This makes it less likely to run into an ENOMEM because
VM page tables are evicted last.

v2: move the BOs in the LRU tail after validation
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows the drivers to move a BO to the end of the LRU
without removing and adding it again.

v2: Make it more robust, handle pinned and swapable BOs as well.
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It doesn't make any sense to try to swap out imported BOs.
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If we import a BO with an external reservation object we don't
reserve/unreserve it. So we never add it to the LRU causing a possible
denial of service.

v2: fix typo in commit message
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use kobj_to_dev() instead of open-coding it.
Signed-off-by: NGeliang Tang <geliangtang@163.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use kobj_to_dev() instead of open-coding it.
Signed-off-by: NGeliang Tang <geliangtang@163.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

VCE DPM works similarly to SCLK DPM.  Add a similar interface
for VCE for forcing the VCE clocks.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

UVD DPM works similarly to SCLK DPM.  Add a similar interface
for UVD for forcing the UVD clocks.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

when scheduler is enabled, the semaphore isn't used at all.
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org

The return value should be either negative or zero, no positive.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Use kobj_to_dev() instead of open-coding it.

Link: http://patchwork.freedesktop.org/patch/msgid/3fea991541fbfc4ffece2c174adeb02cb9436c90.1452696179.git.geliangtang@163.comSigned-off-by: NGeliang Tang <geliangtang@163.com>

Since

commit ac9b8236
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date:   Fri Nov 27 18:55:26 2015 +0200

    drm/i915: Introduce a gmbus power domain

gmbus also needs the power domain infrastructure right from the start,
since as soon as we register the i2c controllers someone can use them.

v2: Adjust cleanup paths too (Chris).

v3: Rebase onto -nightly (totally bogus tree I had lying around) and
also move dpio init head (Ville).

v4: Ville instead suggested to move gmbus setup later in the sequence,
since it's only needed by the modeset code.

v5: Move even close to the actual user, right next to the comment that
states where we really need gmbus (and interrupts!).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Meelis Roos <mroos@linux.ee>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: ac9b8236 ("drm/i915: Introduce a gmbus power domain")
Cc: stable@vger.kernel.org
References: http://www.spinics.net/lists/intel-gfx/msg83075.htmlSigned-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452682528-19437-1-git-send-email-daniel.vetter@ffwll.chSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

An encoder is associated with a connector by the DRM core as a result of
setting up a configuration. Drivers using the atomic or legacy helpers
should never set up this link, even if it is a static one.

While at it, try to catch this kind of error in the future by adding a
WARN_ON() in drm_mode_connector_attach_encoder(). Note that this doesn't
cover all the cases, since drivers could set this up after attaching.
Drivers that use the atomic helpers will get a warning later on, though,
so hopefully the two combined cover enough to help people avoid this in
the future.

Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Cc: Mark yao <mark.yao@rock-chips.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1447694393-24700-1-git-send-email-thierry.reding@gmail.com

Kernel and userspace are able to handle 4GB (1<<32) address space range,
but "A32 Stateless Model" is not. According to documentation, A32 accesses
are based on General State Base Address and bound checking is in place.
Because size field (instruction State Base Address) limitation, it is not
possible to address full 4GB memory region.

A32 Stateless Model is used by some libraries and without this patch, the
last page of 4GB address space is not accessible in 32bit processes.
Reported-by: NArtur Harasimiuk <artur.harasimiuk@intel.com>
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452512367-23614-1-git-send-email-michel.thierry@intel.com
Cc: drm-intel-fixes@lists.freedesktop.org
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 1892faa9)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

This fixes a spurious warning from an integer overflow on 64-bits systems.
The function may return MAX_SCHEDULE_TIMEOUT which gets truncated to -1.

Explicitly handling this by casting to lret fixes it.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-and-tested-by: NJoseph Yasi <joe.yasi@gmail.com>
Tested-by: NAndreas Reis <andreas.reis@gmail.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: 3c28ff22 ("i915: wait for fence in prepare_plane_fb")
Link: http://patchwork.freedesktop.org/patch/msgid/5666EEC8.2000403@linux.intel.com
(cherry picked from commit bcf8be27)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

This fixes reprobing of display connectors on resume.  After some
talking with danvet on IRC, I learned that calling
drm_helper_hpd_irq_event() does actually trigger a full reprobe of each
connector's status. It turns out this is the actual reason reprobing on
resume hasn't been working (this was observed on a T440s):

	- We call hpd_init()
	- We check each connector for a couple of things before marking
	  connector->polled with DRM_CONNECTOR_POLL_HPD, one of which is an
	  active encoder. Of course, a disconnected port won't have an
	  active encoder, so we don't add the flag to any of the
	  connectors.
	- We call drm_helper_hpd_irq_event()
	- drm_helper_irq_event() checks each connector for the
	  DRM_CONNECTOR_POLL_HPD flag. The only one that has it is eDP-1,
	  so we skip reprobing each connector except that one.

In addition, we also now avoid setting connector->polled to
DRM_CONNECTOR_POLL_HPD for MST connectors, since their reprobing is
handled by the mst helpers. This is probably what was originally
intended to happen here.

Changes since V1:
* Use the explanation of the issue as the commit message instead
* Change the title of the commit, since this does more then just stop a
  check for an encoder now
* Add "Fixes" line for the patch that introduced this regression
* Don't enable DRM_CONNECTOR_POLL_HPD for mst connectors

Changes since V2:
* Put patch changelog above Signed-off-by
* Follow Daniel Vetter's suggestion for making the code here a bit more
  legible

Fixes: 0e32b39c ("drm/i915: add DP 1.2 MST support (v0.7)")
Cc: stable@vger.kernel.org
Signed-off-by: NLyude <cpaul@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452181408-14777-1-git-send-email-cpaul@redhat.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 07c51913)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

We still keep getting

[    4.249930] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!

This reverts

commit 820da7ae
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Wed Nov 25 16:47:23 2015 +0200

    Revert "drm/i915: shut up gen8+ SDE irq dmesg noise"

which in itself is a revert, so this is just doing

commit 97e5ed11
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Oct 23 10:56:12 2015 +0200

    drm/i915: shut up gen8+ SDE irq dmesg noise

all over again. I'll stop pretending I understand what's going on like I
did when I thought I'd fixed this for good in

commit 6a39d7c9
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Wed Nov 25 16:47:22 2015 +0200

    drm/i915: fix the SDE irq dmesg warnings properly
Reported-by: NChris Wilson <chris@chris-wilson.co.uk>
Reference: http://mid.gmane.org/20151213124945.GA5715@nuc-i3427.alporthouse.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92084
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: 820da7ae ("Revert "drm/i915: shut up gen8+ SDE irq dmesg noise"")
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452155350-14658-1-git-send-email-jani.nikula@intel.com
(cherry picked from commit 2dfb0b81)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Following a GPU reset, we may leave the context in a poorly defined
state, and reloading from that context will leave the GPU flummoxed. For
secondary contexts, this will lead to that context being banned - but
currently it is also causing the default context to become banned,
leading to turmoil in the shared state.

This is a regression from

commit 6702cf16 [v4.1]
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date:   Mon Mar 16 16:00:58 2015 +0000

    drm/i915: Initialize all contexts

which quietly introduced the removal of the MI_RESTORE_INHIBIT on the
default context.

v2: Mark the global default context as uninitialized on GPU reset so
that the context-local workarounds are reloaded upon re-enabling.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1448630935-27377-1-git-send-email-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Cc: stable@vger.kernel.org
[danvet: This seems to fix a gpu hand on after the first resume,
resulting in any future suspend operation failing with -EIO because
the gpu seems to be in a funky state. Somehow this patch fixes that.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 42f1cae8)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

They're causing massive amounts of dmesg noise and hence CI noise all
over the place. Enabling them for a bit was good enough to refresh our
task list of what's still needed to enable rpm by default.

To make sure we're not forgetting to make this noisy again add a FIXME
comment.

Fixes: da5827c3 ("drm/i915: add assert_rpm_wakelock_held helper")
Cc: Imre Deak <imre.deak@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1452012847-4737-1-git-send-email-daniel.vetter@ffwll.chSigned-off-by: NDaniel Vetter <daniel.vetter@intel.com>
(cherry picked from commit becd9ca2)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

According to PRM, some parts of HW require the addresses to be in
a canonical form, where bits [63:48] == [47]. Let's convert addresses to
canonical form prior to relocating and return converted offsets to
userspace. We also need to make sure that userspace is using addresses
in canonical form in case of softpin.

v2: Whitespace fixup, gen8_canonical_addr description (Chris, Ville)
v3: Rebase on top of softpin, fix a hole in relocate_entry,
    s/expect/require (Chris)
v4: Handle softpin in validate_exec_list (Chris)
v5: Convert back to canonical form at copy_to_user time (Chris)
v6: Don't use struct exec_object2 in place of exec_object
v7: Use sign_extend64 for converting to canonical form (Joonas),
    reject non-canonical and non-page-aligned offset for softpin (Chris)
v8: Convert back to non-canonical form in a function,
    split the test for EXEC_OBJECT_PINNED (Chris)
v9: s/canonial/canonical, drop accidental double newline (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NMichał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1451409892-13708-1-git-send-email-michal.winiarski@intel.com
Testcase: igt/gem_bad_reloc/negative-reloc-blt
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92699
Cc: drm-intel-fixes@lists.freedesktop.org
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 934acce3)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>