- 10 6月, 2013 4 次提交
-
-
由 Patrik Jakobsson 提交于
The internal crtc cursor gem object pointer was never set/updated since it was required to be set in the first place. Fixing this will make the pin/unpin count match and prevent cursor objects from leaking when userspace drops all references to it. Also make sure we drop the gem obj reference on failure. This patch only affects Cedarview chips. Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Patrik Jakobsson 提交于
The internal crtc cursor gem object pointer was never set/updated since it was required to be set in the first place. Fixing this will make the pin/unpin count match and prevent cursor objects from leaking when userspace drops all references to it. Also make sure we drop the gem obj reference on failure. This patch only affects Poulsbo chips. Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Patrik Jakobsson 提交于
The framebuffer needs to be unpinned in the crtc->disable callback because of previous pinning in psb_intel_pipe_set_base(). This will fix a memory leak where the framebuffer was released but not unpinned properly. This patch only affects Cedarview. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=889511 Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=812113 Cc: stable@vger.kernel.org Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Patrik Jakobsson 提交于
The framebuffer needs to be unpinned in the crtc->disable callback because of previous pinning in psb_intel_pipe_set_base(). This will fix a memory leak where the framebuffer was released but not unpinned properly. This patch only affects Poulsbo. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=889511 Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=812113 Cc: stable@vger.kernel.org Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
- 15 5月, 2013 1 次提交
-
-
由 Patrik Jakobsson 提交于
Old code assumed framebuffer starts at base of stolen memory. Since the addition of hardware cursors, this might not be true anymore so add the gtt offset to the calculation. Reported-by: NHolger Schurig <holgerschurig@gmail.com> Tested-by: NHolger Schurig <holgerschurig@gmail.com> Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
- 03 5月, 2013 5 次提交
-
-
由 Dave Airlie 提交于
Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Merge the fixes for the server driver dirty update paths * server-fixes: drm/cirrus: deal with bo reserve fail in dirty update path drm/ast: deal with bo reserve fail in dirty update path drm/mgag200: deal with bo reserve fail in dirty update path
-
git://gitorious.org/linux-omap-dss2/linux由 Dave Airlie 提交于
OMAPDSS fixes for 3.10: * Compilation fix when DSI is disabled in Kconfig * Basic deferred probe support to fix DT boot * tag 'omapdss-for-3.10-fixes' of git://gitorious.org/linux-omap-dss2/linux: OMAPDSS: TFP410: return EPROBE_DEFER if the i2c adapter not found OMAPDSS: VENC: Add error handling for venc_probe_pdata OMAPDSS: HDMI: Add error handling for hdmi_probe_pdata OMAPDSS: RFBI: Add error handling for rfbi_probe_pdata OMAPDSS: DSI: Add error handling for dsi_probe_pdata OMAPDSS: SDI: Add error handling for sdi_probe_pdata OMAPDSS: DPI: Add error handling for dpi_probe_pdata OMAPDSS: VENC: use platform_driver_register() OMAPDSS: HDMI: use platform_driver_register() OMAPDSS: RFBI: use platform_driver_register() OMAPDSS: DSI: use platform_driver_register() OMAPDSS: SDI: use platform_driver_register() OMAPDSS: DPI: use platform_driver_register() OMAPFB: defer probe if no displays OMAPFB: use module_platform_driver() OMAPDSS: Makefile: move omapfb after panels OMAPDSS: DPI: fix compilation if DSI not compiled in
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
Just some fixes that have accumulated over the last couple of weeks and some new PCI ids. * 'drm-next-3.10-2' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix handling of v6 power tables drm/radeon: clarify family checks in pm table parsing drm/radeon: consolidate UVD clock programming drm/radeon: fix UPLL_REF_DIV_MASK definition radeon: add bo tracking debugfs drm/radeon: add new richland pci ids drm/radeon: add some new SI PCI ids drm/radeon: fix scratch reg handling for UVD fence drm/radeon: allocate SA bo in the requested domain drm/radeon: fix possible segfault when parsing pm tables drm/radeon: fix endian bugs in atom_allocate_fb_scratch()
-
由 Dave Airlie 提交于
Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 02 5月, 2013 30 次提交
-
-
由 Alex Deucher 提交于
The code was mis-handling variable sized arrays. Reported-by: NSylvain BERTRAND <sylware@legeek.net> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
We actually care about the chip family rather than the DCE version although functionally they are the same. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Instead of duplicating the code over and over again, just use a single function to handle the clock calculations. Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Stupid copy & paste error over all generations. Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jerome Glisse 提交于
This is to allow debugging of userspace program not freeing buffer after, which is basicly a memory leak. This print the list of all gem object along with their size and placement (VRAM,GTT,CPU) and with the pid of the task that created them. agd5f: add warning fix Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Christian König 提交于
Also init the scratch reg to zero on the UVD ring. This fixes UVD on AGP based cards. Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
This avoid moving the BO directly after allocating it. Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
If we have a empty power table, bail early and allocate the default power state. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=63865Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
Reviwed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Tomi Valkeinen 提交于
If the I2C adapter needed by the TFP410 device is not available yet, return EPROBE_DEFER so that the device will get probed again. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
Add proper error handling for venc_probe_pdata(). This will cause EPROBE_DEFER to be properly passed upwards, causing the VENC driver to be probed again later if a resource was missing. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
Add proper error handling for hdmi_probe_pdata(). This will cause EPROBE_DEFER to be properly passed upwards, causing the HDMI driver to be probed again later if a resource was missing. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
Add proper error handling for rfbi_probe_pdata(). This will cause EPROBE_DEFER to be properly passed upwards, causing the RFBI driver to be probed again later if a resource was missing. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
Add proper error handling for dsi_probe_pdata(). This will cause EPROBE_DEFER to be properly passed upwards, causing the DSI driver to be probed again later if a resource was missing. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
Add proper error handling for sdi_probe_pdata(). This will cause EPROBE_DEFER to be properly passed upwards, causing the SDI driver to be probed again later if a resource was missing. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
Add proper error handling for dpi_probe_pdata(). This will cause EPROBE_DEFER to be properly passed upwards, causing the DPI driver to be probed again later if a resource was missing. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
Use platform_driver_register() instead of platform_driver_probe() so that we can support EPROBE_DEFER. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
Use platform_driver_register() instead of platform_driver_probe() so that we can support EPROBE_DEFER. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
Use platform_driver_register() instead of platform_driver_probe() so that we can support EPROBE_DEFER. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
Use platform_driver_register() instead of platform_driver_probe() so that we can support EPROBE_DEFER. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
Use platform_driver_register() instead of platform_driver_probe() so that we can support EPROBE_DEFER. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
Use platform_driver_register() instead of platform_driver_probe() so that we can support EPROBE_DEFER. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
omapfb requires the panel drivers to have been probed when omapfb is initialized. omapfb does not support insertion of new panels after its probe. This causes a problem in case omapdss or the panel probes have been deferred due to EPROBE_DEFER error, as omapfb won't find any displays. As a quick fix, this patch changes the omapfb probe so that if omapfb does not find any displays, it'll return EPROBE_DEFER. This is not perfect, as with a board with no displays, omapfb will get deferred forever. Also, if the board has multiple displays, but only some of them have been probed, omapfb will start and leave the unprobed displays out. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
Instead of using platform_driver_probe(), use module_platform_driver() so that we can support deferred probing. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
omapfb requires the panels to have been probed before omapfb's probe. We currently manage that by having omapfb in late initcall level. However, a much simpler way is to just change the makefile so that omapfb is after the panel drivers. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
Commit 100c8262 (OMAPDSS: DPI: use new clock calculation code) breaks dpi.c compilation if DSI is not enabled in the kernel configuration. Fix compilation by adding dummy inline functions for the ones that dpi.c references. The functions will never be called, as dpi.c knows that there is no DSI device available. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Dave Airlie 提交于
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next Add GK110 modesetting suport. * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nve0: recognise nvf0 as a kepler board (GK110) drm/nouveau: force noaccel when no PFIFO support present drm/nvf0/disp: expose display class 2.2
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-