As noted by Akinobu Mita in patch b1fceac2,
alloc_bootmem and related functions never return NULL and always return a
zeroed region of memory.  Thus a NULL test or memset after calls to these
functions is unnecessary.

 arch/frv/mm/init.c |    2 --
 1 file changed, 2 deletions(-)

This was fixed using the following semantic patch.
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression E;
statement S;
@@

E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...)
... when != E
(
- BUG_ON (E == NULL);
|
- if (E == NULL) S
)

@@
expression E,E1;
@@

E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...)
... when != E
- memset(E,0,E1);
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Switch unaligned access to the packed-struct implementation for BE accesses as
this reduces the size of the kernel a little.  LE still uses the byte shift.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provide dma_map_page() for the NOMMU-mode FRV arch.

Also do some fixing on the comments attached to the various DMA functions for
both MMU and NOMMU mode FRV code.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the generic pci_enable_resources() instead of the arch-specific code.

Unlike this arch-specific code, the generic version:
    - checks PCI_NUM_RESOURCES (11), not 6, resources
    - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
    - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
    - checks for resource collisions with "!r->parent"
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: Add more documentation to firewire-cdev.h
  firewire: fix ioctl() return code
  firewire: fix setting tag and sy in iso transmission
  firewire: fw-sbp2: fix another small generation access bug
  firewire: fw-sbp2: enforce s/g segment size limit
  firewire: fw_send_request_sync()
  ieee1394: survive a few seconds connection loss
  ieee1394: nodemgr clean up class iterators
  ieee1394: dv1394, video1394: remove unnecessary expressions
  ieee1394: raw1394: make write() thread-safe
  ieee1394: raw1394: narrow down the state_mutex protected region
  ieee1394: raw1394: replace BKL by local mutex, make ioctl() and mmap() thread-safe
  ieee1394: sbp2: enforce s/g segment size limit
  ieee1394: sbp2: check for DMA mapping failures
  ieee1394: sbp2: stricter dma_sync
  ieee1394: Use DIV_ROUND_UP

Open-code them rather than using defining macros.  The function bodies are now
next to their kerneldoc comments as a bonus.

Add casts to the signed cases as they call into the unsigned versions.

Avoids the sparse warnings:
lib/vsprintf.c:249:1: warning: incorrect type in argument 3 (different signedness)
lib/vsprintf.c:249:1:    expected unsigned long *res
lib/vsprintf.c:249:1:    got long *res
lib/vsprintf.c:249:1: warning: incorrect type in argument 3 (different signedness)
lib/vsprintf.c:249:1:    expected unsigned long *res
lib/vsprintf.c:249:1:    got long *res
lib/vsprintf.c:251:1: warning: incorrect type in argument 3 (different signedness)
lib/vsprintf.c:251:1:    expected unsigned long long *res
lib/vsprintf.c:251:1:    got long long *res
lib/vsprintf.c:251:1: warning: incorrect type in argument 3 (different signedness)
lib/vsprintf.c:251:1:    expected unsigned long long *res
lib/vsprintf.c:251:1:    got long long *res
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove extra lines before the EXPORT_SYMBOL()s
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The default base is 10 unless there is a leading zero, in which
case the base will be guessed as 8.

The base will only be guesed as 16 when the string starts with '0x'
the third character is a valid hex digit.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes the following compile error caused by commit
589f800b ("fastboot: make the raid
autodetect code wait for all devices to init"):

    CC      init/do_mounts_md.o
  init/do_mounts_md.c: In function 'autodetect_raid':
  init/do_mounts_md.c:285: error: implicit declaration of function 'msleep'
  make[2]: *** [init/do_mounts_md.o] Error 1
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Blackfin arch: make sure cycles is marked as volatile so gcc doesnt reorder on us
  Blackfin arch: disable CONFIG_HW_RANDOM and CONFIG_DAB in defconfig files
  Blackfin arch: update cache flush prototypes with argument names to make them less mysterious
  Blackfin arch: move bfin_addr_dcachable() and friends into the cacheflush header where it belongs
  Blackfin arch: use the new bfin_addr_dcachable() function
  Blackfin arch: fix bug - build kernel failed at head.S when reprogram clock on all platforms
  Blackfin arch: unify/cleanup cache code
  Blackfin arch: update AD7879 platform resources in board file
  Blackfin arch: Zero out bss region in L1/L2 memory.
  Blackfin arch: add read/write IO accessor functions to Blackfin
  Blackfin arch: fix bug - some serial header files set RTS to an input when they should all be outputs

* 'agp-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6:
  agp/nvidia: Support agp user-memory on nvidia agp.
  agp/amd-k7: Suspend support for AMD K7 GART driver
  agp/intel: Reduce extraneous PCI posting reads during init
  agp: Fix stolen memory counting on G4X.

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (46 commits)
  UIO: Fix mapping of logical and virtual memory
  UIO: add automata sercos3 pci card support
  UIO: Change driver name of uio_pdrv
  UIO: Add alignment warnings for uio-mem
  Driver core: add bus_sort_breadthfirst() function
  NET: convert the phy_device file to use bus_find_device_by_name
  kobject: Cleanup kobject_rename and !CONFIG_SYSFS
  kobject: Fix kobject_rename and !CONFIG_SYSFS
  sysfs: Make dir and name args to sysfs_notify() const
  platform: add new device registration helper
  sysfs: use ilookup5() instead of ilookup5_nowait()
  PNP: create device attributes via default device attributes
  Driver core: make bus_find_device_by_name() more robust
  usb: turn dev_warn+WARN_ON combos into dev_WARN
  debug: use dev_WARN() rather than WARN_ON() in device_pm_add()
  debug: Introduce a dev_WARN() function
  sysfs: fix deadlock
  device model: Do a quickcheck for driver binding before doing an expensive check
  Driver core: Fix cleanup in device_create_vargs().
  Driver core: Clarify device cleanup.
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  module: remove CONFIG_KMOD in comment after #endif
  remove CONFIG_KMOD from fs
  remove CONFIG_KMOD from drivers

Manually fix conflict due to include cleanups in drivers/md/md.c

* 'personality' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [PATCH] remove unused ibcs2/PER_SVR4 in SET_PERSONALITY

* 'docs' of git://git.lwn.net/linux-2.6:
  Document panic_on_unrecovered_nmi sysctl
  Add a reference to paper to SubmittingPatches
  Add kerneldoc documentation for new printk format extensions
  Remove videobook.tmpl
  doc: Test-by?
  Add the development process document
  Documentation/block/data-integrity.txt: Fix section numbers

* 'for-linus' of git://neil.brown.name/md:
  md: fix input truncation in safe_delay_store()
  md: check for memory allocation failure in faulty personality
  md: build failure due to missing delay.h
  md: Relax minimum size restrictions on chunk_size.
  md: remove space after function name in declaration and call.
  md: Remove unnecessary #includes, #defines, and function declarations.
  md: Convert remaining 1k representations in linear.c to sectors.
  md: linear.c: Make two local variables sector-based.
  md: linear: Represent dev_info->size and dev_info->offset in sectors.
  md: linear.c: Remove broken debug code.
  md: linear.c: Remove pointless initialization of curr_offset.
  md: linear.c: Fix typo in comment.
  md: Don't try to set an array to 'read-auto' if it is already in that state.
  md: Allow metadata_version to be updated for externally managed metadata.
  md: Fix rdev_size_store with size == 0

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (32 commits)
  Input: wm97xx - update email address for Liam Girdwood
  Input: i8042 - add Thinkpad R31 to nomux list
  Input: move map_to_7segment.h to include/linux
  Input: ads7846 - fix cache line sharing issue
  Input: cm109 - add missing newlines to messages
  Input: document i8042.debug in kernel-parameters.txt
  Input: keyboard - fix potential out of bound access to key_map
  Input: psmouse - add OLPC touchpad driver
  Input: psmouse - tweak PSMOUSE_DEFINE_ATTR to support raw set callbacks
  Input: psmouse - add psmouse_queue_work() for ps/2 extension to make use of
  Input: psmouse - export psmouse_set_state for ps/2 extensions to use
  Input: ads7846 - introduce .gpio_pendown to get pendown state
  Input: ALPS - add signature for DualPoint found in Dell Latitude E6500
  Input: serio_raw - allow attaching to translated (SERIO_I8042XL) ports
  Input: cm109 - don't use obsolete logging macros
  Input: atkbd - expand Latitude's force release quirk to other Dells
  Input: bf54x-keys - add power management support
  Input: atmel_tsadcc - improve accuracy
  Input: convert drivers to use strict_strtoul()
  Input: appletouch - handle geyser 3/4 status bits
  ...

With m68k allmodconfig, I get:

| drivers/rtc/rtc-ds1286.c: In function 'ds1286_rtc_read':
| drivers/rtc/rtc-ds1286.c:33: error: implicit declaration of function '__raw_readl'
| drivers/rtc/rtc-ds1286.c: In function 'ds1286_rtc_write':
| drivers/rtc/rtc-ds1286.c:38: error: implicit declaration of function '__raw_writel'
| drivers/rtc/rtc-ds1286.c: In function 'ds1286_probe':
| drivers/rtc/rtc-ds1286.c:345: error: implicit declaration of function 'ioremap'
| drivers/rtc/rtc-ds1286.c:345: warning: assignment makes pointer from integer without a cast
| drivers/rtc/rtc-ds1286.c:365: error: implicit declaration of function 'iounmap'

and

| drivers/rtc/rtc-m48t35.c: In function 'm48t35_read_time':
| drivers/rtc/rtc-m48t35.c:59: error: implicit declaration of function 'readb'
| drivers/rtc/rtc-m48t35.c:60: error: implicit declaration of function 'writeb'
| drivers/rtc/rtc-m48t35.c: In function 'm48t35_probe':
| drivers/rtc/rtc-m48t35.c:168: error: implicit declaration of function 'ioremap'
| drivers/rtc/rtc-m48t35.c:168: warning: assignment makes pointer from integer without a cast
| drivers/rtc/rtc-m48t35.c:188: error: implicit declaration of function 'iounmap'

Include <linux/io.h> to get access to the I/O API.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds "panic_on_unrecovered_nmi" sysctl to
Documentation/filesystems/proc.txt. The text is mainly taken from
http://readlist.com/lists/vger.kernel.org/linux-kernel/43/217998.html.
Signed-off-by: NBernhard Walle <bwalle@suse.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: blacklist additional SoundGraph iMon LCD models
  HID: fix/improve help texts for quirk drivers
  HID: fix default building of HID-quirk drivers

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (26 commits)
  decnet: Fix compiler warning in dn_dev.c
  IPV6: Fix default gateway criteria wrt. HIGH/LOW preference radv option
  net/802/fc.c: Fix compilation warnings
  netns: correct mib stats in ip6_route_me_harder()
  netns: fix net_generic array leak
  rt2x00: fix regression introduced by "mac80211: free up 2 bytes in skb->cb"
  rtl8187: Add USB ID for Belkin F5D7050 with RTL8187B chip
  p54usb: Device ID updates
  mac80211: fixme for kernel-doc
  ath9k/mac80211: disallow fragmentation in ath9k, report to userspace
  libertas : Remove unused variable warning for "old_channel" from cmd.c
  mac80211: Fix scan RX processing oops
  orinoco: fix unsafe locking in spectrum_cs_suspend
  orinoco: fix unsafe locking in orinoco_cs_resume
  cfg80211: fix debugfs error handling
  mac80211: fix debugfs netdev rename
  iwlwifi: fix ct kill configuration for 5350
  mac80211: fix HT information element parsing
  p54: Fix compilation problem on PPC
  mac80211: fix debugfs lockup
  ...

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (51 commits)
  [ARM] 5308/1: Fix Viper ISA IRQ handling
  [ARM] 5307/1: pxa: fix CM-X2XX PCMCIA build error
  [ARM] 5306/1: pxa: fix build error on CM-X270
  [ARM] 5302/1: ARM: OMAP: Revert omap3 WDT changes to avoid merge conflict
  [ARM] 5305/1: ARM: OMAP: Fix compile of McBSP by removing unnecessary check
  [ARM] 5301/1: ARM: OMAP: Add missing irq defines
  ARM: OMAP3: Add default kernel config for OMAP LDP
  ARM: OMAP3: Add basic board support for OMAP LDP
  ARM: OMAP3: Defconfig for the Gumstix Overo board (rev 3)
  ARM: OMAP3: Add support for the Gumstix Overo board (rev 3)
  ARM: OMAP3: Add Beagle defconfig
  ARM: OMAP3: Add minimal Beagle board support
  ARM: OMAP3: Add minimal omap3430 support
  ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code
  ARM: OMAP: Fixes to omap_mcbsp_request function
  ARM: OMAP: Add support for OMAP2430 in McBSP
  ARM: OMAP: Add support for McBSP devices 3 - 5 on 34xx
  ARM: OMAP: Allocate McBSP devices dynamically
  Fix sections for omap-mcbsp platform driver
  [ARM] S3C24XX: Additional include moves
  ...

The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) /
(d)) but is perhaps more readable.

An extract of the semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@haskernel@
@@

#include <linux/kernel.h>

@depends on haskernel@
expression n,d;
@@

(
- (n + d - 1) / d
+ DIV_ROUND_UP(n,d)
|
- (n + (d - 1)) / d
+ DIV_ROUND_UP(n,d)
)

@depends on haskernel@
expression n,d;
@@

- DIV_ROUND_UP((n),d)
+ DIV_ROUND_UP(n,d)

@depends on haskernel@
expression n,d;
@@

- DIV_ROUND_UP(n,(d))
+ DIV_ROUND_UP(n,d)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Acked-by: NJeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make the needlessly global kretprobe_table_lock() static.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Acked-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make the needlessly global hp_wmi_notify() static.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add resource_type() and IORESOURCE_TYPE_BITS.  They make it easier to add
more resource types without having to rewrite tons of code.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

No functional change.  Just return NULL for kzalloc failure immediately,
rather than wrapping the whole function body in the body of an "if".
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A few minor updates for the GRU driver.
	- documentation changes found in code reviews
	- changes to #ifdefs to make them recognized by "unifdef"
	  (used in simulator testing)
	- change GRU context load/unload to prefetch data

[akpm@linux-foundation.org: fix typo in comment]
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patchs adds the CONFIG_AIO option which allows to remove support
for asynchronous I/O operations, that are not necessarly used by
applications, particularly on embedded devices. As this is a
size-reduction option, it depends on CONFIG_EMBEDDED. It allows to
save ~7 kilobytes of kernel code/data:

   text	   data	    bss	    dec	    hex	filename
1115067	 119180	 217088	1451335	 162547	vmlinux
1108025	 119048	 217088	1444161	 160941	vmlinux.new
  -7042    -132       0   -7174   -1C06 +/-

This patch has been originally written by Matt Mackall
<mpm@selenic.com>, and is part of the Linux Tiny project.

[randy.dunlap@oracle.com: build fix]
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Zach Brown <zach.brown@oracle.com>
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

[akpm@linux-foundation.org: minor fixlets and cleanups]
Signed-off-by: NBernhard Weirich <bernhard.weirich@riedel.net>
Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Optimize the ds_set_pullup function.  For a strong pullup to be sent the
ds2490 has to have both the strong pullup mode enabled, and the specific
write operation has to have the SPU bit enabled.  Previously the write
always had the SPU bit enabled and both the duration and model was set
when a strong pullup was requested.  Now the strong pullup mode is enabled
at initialization time, the delay is updated only when the value changes,
and the write SPU bit is set only when a strong pullup is required.  This
removes two or three bus transactions per strong pullup request.
Signed-off-by: NDavid Fries <david@fries.net>
Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provide some additional details about the status of the driver and the
ds2490 hardware.
Signed-off-by: NDavid Fries <david@fries.net>
Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Drop the extra ds_wait_status() in ds_write_block().
Signed-off-by: NDavid Fries <david@fries.net>
Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This replaces some magic numbers with marcos and corrects one marco.
Signed-off-by: NDavid Fries <david@fries.net>
Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reset the device in init as it can be in a bad state.  This is necessary
because a block write will wait for data to be placed in the output buffer
and block any later commands which will keep accumulating and the device
will not be idle.  Another case is removing the ds2490 module while a bus
search is in progress, somehow a few commands get through, but the input
transfers fail leaving data in the input buffer.  This will cause the next
read to fail see the note in ds_recv_data.
Signed-off-by: NDavid Fries <david@fries.net>
Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ds_reset no longer calls ds_wait_status, the result wasn't used and it
would only delay the following data operations.
Signed-off-by: NDavid Fries <david@fries.net>
Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- add result register #defines
- rename ds_dump_status to ds_print_msg
- rename ds_recv_status to ds_dump_status
- ds_dump_status prints the requested status and no longer reads the
  status, this is because the second status read can return different
  data for example the result register
- the result register will be printed, though limited to detecting a
  new device, detecting other values such as a short would require
  additional reporting methods
- ST_EPOF was moved to ds_wait_status to clear the error condition
  sooner
Signed-off-by: NDavid Fries <david@fries.net>
Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Simplify and fix ds_touch_bit.  If a device is attached in the middle of a
bus search the status register will return more than the default 16 bytes.
 The additional bytes indicate that it has detected a new device.  The way
ds_wait_status is coded, if it doesn't read 16 status bytes it returns an
error value.  ds_touch_bit then will detect that error and return an
error.  In that case it doesn't read the input buffer and returns
uninitialized data.  It doesn't stop there.  The next transaction will not
expect the extra byte in the input buffer and the short read will cause an
error and clear out both the old byte and new data in the input buffer.

Just ignore the value of ds_wait_status.  It is still required to wait
until ds2490 is again idle and there is data to read when ds_recv_data is
called.  This also removes the while loop.  None of the other commands
wait and verify that the issued command is in the status register.
Signed-off-by: NDavid Fries <david@fries.net>
Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Don't export read and write bit operations, they didn't work, they weren't
used, and they can't be made to work.  The one wire low level bit
operations expect to set high or low levels, the ds2490 hardware only
supports complete read or write time slots, better to just comment them
out.
Signed-off-by: NDavid Fries <david@fries.net>
Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>