The advertisement bits for flow control are located in
different location on fiber (1000baseX)
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>

When PHY is turned off on shutdown, it causes the IRQ to get stuck on.
Make sure and disable the IRQ first, and if IRQ occurs when device
is not running, don't access PHY because that will hang.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>

The workaround timer is not needed in most systems with proper IRQ
routing and by perodically waking up it adds to laptop power consumption.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>

Some motherboards don't implement MSI correctly. The driver handles this
but the warning is too verbose and overly cautious.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: fm801-gp - handle errors from pci_enable_device()
  Input: gameport core - handle errors returned by device_bind_driver()
  Input: serio core - handle errors returned by device_bind_driver()
  Lockdep: fix compile error in drivers/input/serio/serio.c
  Input: serio - add lockdep annotations
  Lockdep: add lockdep_set_class_and_subclass() and lockdep_set_subclass()
  Input: atkbd - supress "too many keys" error message
  Input: i8042 - supress ACK/NAKs when blinking during panic
  Input: add missing exports to fix modular build

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Check for offline nodes in pci NUMA code
  [POWERPC] Better check in show_instructions
  [POWERPC] POWER6 has 6 PMCs
  [POWERPC] Never panic when taking altivec exceptions from userspace
  [POWERPC] Fix IO Window Updates on P2P bridges.
  [POWERPC] Add Makefile entry for MPC832x_mds support
  [POWERPC] Fix MPC8360EMDS PB board support
  [POWERPC] ppc: Add missing calls to set_irq_regs
  [POWERPC] Off-by-one in /arch/ppc/platforms/mpc8*
  [POWERPC] Add DOS partition table support to mpc834x_itx_defconfig
  [POWERPC] spufs: fix support for read/write on cntl
  [POWERPC] Don't crash on cell with 2 BEs when !CONFIG_NUMA

Most of the ISDN ->readstat() implementations needed to check
copy_to_user() and put_user() return values.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is a particularly ugly on-failure bug, possibly security, since the
lack of error handling here is covering up another class of bug: failure to
handle copy_to_user() return values.

The I4L API function ->readstat() returns an integer, and by looking at
several existing driver implementations, it is clear that a negative return
value was meant to indicate an error.

Given that several drivers already return a negative value indicating an
errno-style error, the current code would blindly accept that [negative]
value as a valid amount of bytes read.  Obvious damage ensues.

Correcting ->readstat() handling to properly notice errors fixes the
existing code to work correctly on error, and enables future patches to
more easily indicate errors during operation.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Cc: Karsten Keil <kkeil@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAmol Lad <amol@verismonetworks.com>
Acked-by: NKarsten Keil <kkeil@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With Karsten Keil <kkeil@suse.de>

save_flags()/cli() pair is replaced with spin_lock_irqsave() and
restore_flags() replaced with spin_unlock_irqrestore()

Tested compile only using allmodconfig
Signed-off-by: NAmol Lad <amol@verismonetworks.com>
Acked-by: NKarsten Keil <kkeil@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The use of blocking notifier by _cpu_up and _cpu_down in cpu.c has two
problem.

1/ An interaction with the workqueue notifier causes lockdep to spit a
   warning.

2/ A notifier could conceivable be added or removed while _cpu_up or
   _cpu_down are in process.  As each notifier is called twice (prepare
   then commit/abort) this could be unhealthy.

To fix to we simply take cpu_add_remove_lock while adding or removing
notifiers to/from the list.

This makes the 'blocking' usage unnecessary as all accesses to cpu_chain
are now protected by cpu_add_remove_lock.  So change "blocking" to "raw" in
all relevant places.  This fixes 1.

Credit: Andrew Morton
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> (reporter)
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

BUG: warning at kernel/rtmutex-debug.c:125/rt_mutex_debug_task_free() (Not tainted)
 [<c04051e3>] show_trace_log_lvl+0x58/0x16a
 [<c04057f0>] show_trace+0xd/0x10
 [<c0405900>] dump_stack+0x19/0x1b
 [<c043f03d>] rt_mutex_debug_task_free+0x35/0x6a
 [<c04224c0>] free_task+0x15/0x24
 [<c042378c>] copy_process+0x12bd/0x1324
 [<c0423835>] do_fork+0x42/0x113
 [<c04021dd>] sys_fork+0x19/0x1b
 [<c0403fb7>] syscall_call+0x7/0xb

In copy_process(), dup_task_struct() also duplicates the ->pi_lock,
->pi_waiters and ->pi_blocked_on members.  rt_mutex_debug_task_free()
called from free_task() validates these members.  However free_task() can
be invoked before these members are reset for the new task.

Move the initialization code before the first bail that can hit free_task().
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add functions defined using ENTRY macro to the tags file.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some people want to do crazy things like pass multiple directories as the
value of $(SUBDIRS) or $M.  Mostly this kinda works, except that
Makefile.modpost constructs a modpost commandline which fails modpost's
argument parsing.  This patch fixes that little wrinkle.
Signed-off-by: NGreg Banks <gnb@melbourne.sgi.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make epca fail on initialization failure instead of panic.

Cc: "Digi International, Inc" <Eng.Linux@digi.com>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: NAlan Cox <alan@redhat.com>
Acked-by: NScott Kilau <scottk@digi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If RAM disk driver initialization fails due to blk_alloc_queue() faulure, the
gendisk structs stored in rd_disks[] will not be freed completely.

This patch resolves that memory leak case by doing alloc_disk() and
blk_alloc_queue() at the same time.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Lockdep doesn't like to enable interrupts when they are enabled already.

BUG: warning at kernel/lockdep.c:1814/trace_hardirqs_on() (Not tainted)
 [<c04051ed>] show_trace_log_lvl+0x58/0x16a
 [<c04057fa>] show_trace+0xd/0x10
 [<c0405913>] dump_stack+0x19/0x1b
 [<c043abfb>] trace_hardirqs_on+0xa2/0x11e
 [<c041463c>] apm_bios_call_simple+0xcd/0xfd
 [<c0415242>] apm+0x92/0x5b1
 [<c0402005>] kernel_thread_helper+0x5/0xb
DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb
Leftover inexact backtrace:
 [<c04057fa>] show_trace+0xd/0x10
 [<c0405913>] dump_stack+0x19/0x1b
 [<c043abfb>] trace_hardirqs_on+0xa2/0x11e
 [<c041463c>] apm_bios_call_simple+0xcd/0xfd
 [<c0415242>] apm+0x92/0x5b1
 [<c0402005>] kernel_thread_helper+0x5/0xb
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With 64-bit resources on 32-bit platforms, the resource address might be
larger than a void*.  Fix printk to work regardless of resource size.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Handle errors thrown in disk_sysfs_symlinks(), and propagate back to
caller.

The callers and associated functions don't do a real good job of handling
kobject errors anyway (add_partition, register_disk, rescan_partitions), so
this should do until something better comes along.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NJeff Garzik <jeff@garzik.org>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NJeff Garzik <jeff@garzik.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When IO error happens on metadata buffer, buffer is freed from memory and
later fsync() is called, filesystems like ext2 fail to report EIO.  We

solve the problem by introducing a pointer to associated address space into
the buffer_head.  When a buffer is removed from a list of metadata buffers
associated with an address space, IO error is transferred from the buffer to
the address space, so that fsync can later report it.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It is possible for the ->fopen callback from lockd into nfsd to find that an
answer cannot be given straight away (an upcall is needed) and so the request
has to be 'dropped', to be retried later.  That error status is not currently
propagated back.

So:
  Change nlm_fopen to return nlm error codes (rather than a private
  protocol) and define a new nlm_drop_reply code.
  Cause nlm_drop_reply to cause the rpc request to get rpc_drop_reply
  when this error comes back.
  Cause svc_process to drop a request which returns a status of
  rpc_drop_reply.

[akpm@osdl.org: fix warning storm]
Cc: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When an nfs server shuts down, lockd needs to release all the locks even
though the client still holds them.

It should therefore not 'unmonitor' the clients, so that the files in nfs/sm
will still be there when the nfs server restarts, so that those clients will
be told to reclaim their locks.

However the hosts are fully unmonitored, so statd may well remove the files.

lockd has a test for 'sm_sticky' and avoid the unmonitor call if it is set,
but it is currently not set.

So set it when tearing down lockd.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Coverity noticed that the error handling code in the NFSv4 callback client
sets cb->cb_client to NULL, then calls rpc_shutdown_client with the NULL
pointer.

Coverity: #cid 1397
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We weren't actually checking for SHARE_ACCESS_WRITE, with the result that the
owner could open a non-writeable file for write!

Continue to allow DENY_WRITE only with write access.

Thanks to Jim Rees for reporting the bug.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If a client creates a file using an open which sets the mode to 000, or if a
chmod changes permissions after a file is opened, then situations may arise
where an NFS client knows that some IO is permitted (because a process holds
the file open), but the NFS server does not (because it doesn't know about the
open, and only sees that the IO conflicts with the current mode of the file).

As a hack to solve this problem, NFS servers normally allow the owner to
override permissions on IO.  The client can still enforce correct
permissions-checking on open by performing an explicit access check.

In NFSv4 the client can rely on the explicit on-the-wire open instead of an
access check.

Therefore we should not be allowing the owner to override permissions on an
over-the-wire open!

However, we should still allow the owner to override permissions in the case
where the client is claiming an open that it already made either before a
reboot, or while it was holding a delegation.

Thanks to Jim Rees for reporting the bug.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There's no locking for ->d_revalidate, so fuse_dentry_revalidate() should use
dget_parent() instead of simply dereferencing ->d_parent.

Due to topology changes in the directory tree the parent could become negative
or be destroyed while being used.  There hasn't been any reports about this
yet.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fuse considered it an error (EIO) if lookup returned a directory inode, to
which a dentry already refered.  This is because directory aliases are not
allowed.

But in a network filesystem this could happen legitimately, if a directory is
moved on a remote client.  This patch attempts to relax the restriction by
trying to first evict the offending alias from the cache.  If this fails, it
still returns an error (EBUSY).

A rarer situation is if an mkdir races with an indenpendent lookup, which
finds the newly created directory already moved.  In this situation the mkdir
should return success, but that would be incorrect, since the dentry cannot be
instantiated, so return EBUSY.

Previously checking for a directory alias and instantiation of the dentry
weren't done atomically in lookup/mkdir, hence two such calls racing with each
other could create aliased directories.  To prevent this introduce a new
per-connection mutex: fuse_conn->inst_mutex, which is taken for instantiations
with a directory inode.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix a spurious BUG in an unlikely race, where at least three parallel lookups
return the same inode, but with different file type.  This has not yet been
observed in real life.

Allowing unlimited retries could delay fuse_iget() indefinitely, but this is
really for the broken userspace filesystem to worry about.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

An inode could be returned by independent parallel lookups, in this case an
update of the lookup counter could be lost resulting in a memory leak in
userspace.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Unless someone reads the documentation for write_seqcount_{begin,end} it is
not obvious, that i_size_write() needs locking.  Especially, that lack of such
locking can result in a system hang.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fuse didn't always call i_size_write() with i_mutex held which caused rare
hangs on SMP/32bit.  This bug has been present since fuse-2.2, well before
being merged into mainline.

The simplest solution is to protect i_size_write() with the per-connection
spinlock.  Using i_mutex for this purpose would require some restructuring of
the code and I'm not even sure it's always safe to acquire i_mutex in all
places i_size needs to be set.

Since most of vmtruncate is already duplicated for other reasons, duplicate
the remaining part as well, making all i_size_write() calls internal to fuse.

Using i_size_write() was unnecessary in fuse_init_inode(), since this function
is only called on a newly created locked inode.

Reported by a few people over the years, but special thanks to Dana Henriksen
who was persistent enough in helping me debug it.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Introduce desc->name and eliminate the handle_irq_name() hack.  Add
set_irq_chip_and_handler_name() to set the flow type and name at once.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix this:

make[3]: *** No rule to make target
`/mnt/md0/devel/linux-git/include/linux/version.h', needed by
`/mnt/md0/devel/linux-git-obj/usr/include/linux/version.h'.  Stop.
make[2]: *** [linux] Error 2
make[1]: *** [headers_install] Error 2
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Correct the following bugs introduced by commit
67cc0161:

- remove one remaining and now incorrect baud_table[] usage
- "baud +=" is no longer correct

The former bug was spotted by the Coverity checker.

Rolf Eike Beer spotted a bug in the initial version of my patch.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

My fancy new swsusp IO code had a big memory leak.  It's somewhat invisible
because the whole mem_map[] gets overwritten after resume, but it can cause us
to get low on memory during the actual suspend process.

Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

drivers/acpi/processor_idle.c:1112: warning: 'smp_callback' defined but not used

Cc: Len Brown <lenb@kernel.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A recent change to the vmalloc() code accidentally resulted in us passing
__GFP_ZERO into the slab allocator.  But we only wanted __GFP_ZERO for the
actual pages whcih are being vmalloc()ed, and passing __GFP_ZERO into slab is
not a rational thing to ask for.

Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>