The authentication can be circumvented, by design, by using the render
node.

From the driver POV there is no distinction between primary and render
nodes, thus we can drop the token.

Note: the outstanding DRM_AUTH instance is:
 - (badly coped) legacy DRI1 ioctl, which is a noop

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NEmil Velikov <emil.velikov@collabora.com>
Acked-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-9-emil.l.velikov@gmail.com

Split out to make the functional changes stick out more.

All places where DRIVER_PRIME was used have been removed in previous
patches already.

v2: amdgpu gained DRIVER_SYNCOBJ_TIMELINE.

v3: amdgpu lost DRIVER_SYNCOBJ_TIMELINE.

v4: Don't add a space in i915_drv.c (Sam)

v5: Add note that previous patches removed all the DRIVER_PRIME users
already (Emil).

v6: Fixupe ingenic (new driver) while applying.

Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: etnaviv@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Cc: lima@lists.freedesktop.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: nouveau@lists.freedesktop.org
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: spice-devel@lists.freedesktop.org
Cc: virtualization@lists.linux-foundation.org
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: xen-devel@lists.xenproject.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190617153924.414-1-daniel.vetter@ffwll.ch

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NEmil Velikov <emil.velikov@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Hook up drm_panel support in the omapdrm driver. The change is
relatively simply as the way has been paved by drm_bridge support
already. In addition to looking up, attaching to and detaching from the
panel, we only need to add panel support in the connector .get_modes()
handler, take connector bus flags (set by the panel) into account, and
enable/disable the panel in the encoder enable/disable operations
handlers.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Hook up drm_bridge support in the omapdrm driver. Despite the recent
extensive preparation work, this is a rather intrusive change, as the
management of outputs needs to be adapted through the driver to handle
both omap_dss_device and drm_bridge.

Connector creation is skipped when using a drm_bridge, as the bridge
creates the connector internally. This creates issues with systems that
split connector operations (such as modes retrieval and hot-plug
detection) across different bridges. These systems can't be supported
using drm_bridge for now (their support through the omap_dss_device
infrastructure is not affected), this will be fixed in subsequent
changes.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The omapdrm driver initialization procedure starts by connecting all
available pipelines, gathering related information (such as output and
display DSS devices, and DT aliases), sorting them by alias, and finally
creates all the DRM/KMS objects.

When using DRM bridges instead of DSS devices, we will need to attach to
the bridges before getting the aliases. As attaching to bridges requires
an encoder object, we have to reorganize the initialization sequence to
create encoders before getting aliases and sorting the pipelines.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The DT bindings for the OMAP DSS allow assigning numerical IDs to
display outputs through display entries in the alias node. The driver
uses this information to sort pipelines according to the order specified
in DT, making it possible for a system to give a priority order to
outputs.

Retrieval of the alias ID is done when initializing display dss devices.
That code will be removed when moving to drm_bridge and drm_panel. Move
retrieval of the alias ID to display pipeline connection time and store
it in the pipeline structure instead to keep the feature.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The display isn't used by the encoder implementation, don't pass it to
the initialization function and store it internally needlessly.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Instead of rolling out custom suspend/resume implementations based on
state information stored in the driver's data structures, use the atomic
suspend/resume helpers that rely on a DRM atomic state object.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.

To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.

v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.

v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.

This will also conflict with ongoing drmP.h cleanup by others I
expect.

v3: Rebase on top of atomic bochs.

v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
  other places (all suggested from Laurent adopted unchanged).
- sort alphabetically

v5: Actually try to sort them, and while at it, sort all the ones I
touch.

v6: Rebase onto i915 changes.

v7: Rebase once more.
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
Acked-by: NOleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: NCK Hu <ck.hu@mediatek.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NLiviu Dudau <liviu.dudau@arm.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch

This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: NThomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: NThomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Instead of determining the connector type from the type of the display's
omap_dss_device and passing it to the omap_connector_init() function,
move the type determination code to omap_connector.c and remove the type
argument to the connector init function. This moves code to a more
natural location, making the driver easier to read.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The drm_connector implementation requires access to the omap_dss_device
corresponding to the display, which is passed to its initialization
function and stored internally. Refactoring of the timings operations
will require access to the output omap_dss_device. To prepare for that,
pass it to the connector initialization function and store it internally
as well.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The drm_encoder implementation requires access to the omap_dss_device
corresponding to the display, which is passed to its initialization
function and stored internally. Clean up of the HDMI mode and infoframe
handling will require access to the output omap_dss_device. To prepare
for that, pass it to the encoder initialization function and store it
internally as well.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The omap_dss_device .enable_hpd() and .disable_hpd() are used to enable
and disable hot-plug detection at omapdrm probe and remove time. This is
required to avoid reporting hot-plug detection events before the DRM
infrastructure is ready to accept them, as that could result in crashes
or other malfunction.

Hot-plug event reporting is conditioned by both HPD being enabled
through the .enable_hpd() operation and by the HPD callback being
registered though the .register_hpd_cb() operation. We thus don't need a
separate enable operation if we can guarantee that callbacks won't be
registered too early.

HPD callbacks are registered at connector initialization time, which is
too early to start reporting HPD events. There's however nothing
blocking a move of callback registration to a later time when the
omapdrm driver calls the HPD enable operations. Do so, and remove the
HPD enable operation completely from omap_dss_device drivers.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

omap_dss_device instances have two ops structures, omap_dss_driver and
omap_dss_device_ops. The former is used for devices at the end of the
pipeline (a.k.a. display devices), and the latter for intermediate
devices.

Having two sets of operations isn't convenient as code that iterates
over omap_dss_device instances need to take them both into account.
There's currently a reasonably small amount of such code, but more will
be introduced to move the driver away from recursive operations. To
simplify current and future code, move all operations that are not
specific to the display device to the omap_dss_device_ops.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The omapdrm driver checks at suspend and resume time whether the
displays it operates on have their driver operations set. This check is
unneeded, as all display drivers set the driver operations field at
probe time and never touch it afterwards. This is furthermore proven by
the dereferencing of the driver field without checking it first in
several locations.

The omapdss driver performs a similar check at shutdown time. This is
unneeded as well, as the for_each_dss_display() macro it uses to iterate
over displays locates the displays by checking the driver field
internally.

As those checks are unnecessary, remove them.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The omap_crtcs global array is used to store pointers to omap_crtc
indexed by DISPC channel number, in order to look them up in the dss_mgr
operations. Store the information in the omap_drm_private structure in
the form of an array of omap_drm_pipeline pointers.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Replace the dss display device pointer by a pipe pointer that will allow
the omap_crtc_init() function to access both the display and the DSS
output. As a result we can remove the omapdss_device_get_dispc_channel()
function that is now unneeded.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The omapdrm and omapdss drivers are architectured based on display
pipelines made of multiple components handled from sink (display) to
source (DSS output). This is incompatible with the DRM bridge and panel
APIs that handle components from source to sink.

To reconcile the omapdrm and omapdss drivers with the DRM bridge and
panel model, we need to reverse the direction of the DSS device
operations. Start with the connect and disconnect operations.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Create an omap_drm_pipeline structure to model display pipelines, made
of a CRTC, an encoder, a connector and a DSS display device. This allows
grouping related parameters together instead of storing them in
independent arrays and thus improves code readability.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Creating all the planes in a single location instead of creating them
per-CRTC with remaining planes then created in a second step simplifies
the logic.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The crtc_idx and plane_idw variables in the main loop are always equal
to the loop counter i, use it instead. Don't unnecessarily initialize
dssdev to NULL.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The DSS manager ops and private data pointer are specific to a DSS
instance. Store them in the dss_device structure instead of global
variable.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Storing the dss_device pointer in the omap_dss_device structure will
allow accessing the dss_device from the dss_mgr API functions.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The functions operate on any omap_dss_device, move them from display.c
to base.c. While at it rename them to match the naming of the other
functions operating on struct omap_dss_device.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The macro iterates over displays only, rename it accordingly.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The omap_dss_device objects model display components and are connected
at runtime to create display pipelines. The connect and disconnect
operations implemented by each component contain lots of duplicate code.
As a first step towards fixing this, create new functions to wrap the
direct calls to those operations and use them.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Sort the dssdev array based on DT aliases.

With this change we can remove the panel ordering from dss/display.c and
have all sorting related to dssdevs in one place.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Instead of reaching back to DSS to iterate through the dss_devices every
time, use an internal array where we store the available and usable
dss_devices.

At the same time remove the omapdss_device_is_connected() check from
omap_modeset_init() as it became irrelevant: We are not adding dssdevs
if their connect failed.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

If we allocate the drm_device earlier we can just return the error code
without the need to use goto.
Do the unref of the drm_device as a last step when cleaning up. This will
make the drm_device available longer for us and makes sure that we only
free up the memory when all other cleanups have been already done.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Again to align with the usual prefix of just drm_connector_. Again
done with sed + manual fixup for indent issues.
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-7-daniel.vetter@ffwll.ch

The only thing that omap_gem_free_object does that might need the magic
protection of struct_mutex (of keeping all objects alive if that lock is
held, even if the last reference is gone) is the mm_list manipulation.
This is already protected by the separate omapdrm->list_lock, which
means that struct_mutex is not needed by omapdrm. We can switch to
gem_free_object_unlocked()
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

- None of the list walkings where protected.

- Switch to a mutex since the list walking at device resume time can
  sleep when pinning buffers through the tiler.

Only thing we need to be careful with here is that while we walk the
list we can't unreference any gem objects, since the final unref would
result in a recursive deadlock. But the only functions that walk the
list is the device resume and debugfs dumping, so all safe.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Planes with identical zpos value will result undefined behavior:
disappearing planes, screen flickering and it is not supported by the
hardware.

Use normalized zpos to make sure that we don't encounter invalid
configuration.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
CC: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321102029.15248-7-peter.ujfalusi@ti.com

We define max width and height in mode_config to 2048. These maximums
affect many things, which are independent and depend on platform. We
need to do more fine grained checks in the code paths for each
component, and so the maximum values in mode_config should just be "big
enough" to cover all use cases.

Change the maximum width & height to 8192.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

omap_fbdev_init() and omap_fbdev_free() use priv->fbdev directly.
However, omap_fbdev_init() returns the fbdev, and omap_drv.c also
assigns the return value to priv->fbdev. This is slightly confusing.

Clean this up by removing the omap_fbdev_init() return value, as we
don't care whether fbdev init succeeded or not. Also change omap_drv.c
to call omap_fbdev_free() always, and omap_fbdev_free() does the check
if fbdev was initialized.

While at it, rename omap_fbdev_free() to omap_fbdev_fini() to better
match the "init" counterpart.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

This removes the need to access the global DISPC private data in those
functions (both for the current accesses and the future ones that will
be introduced when allocating the DISPC private data dynamically).

In order to allow the omapdrm side to call the dispc_ops with a DISPC
pointer, we also introduce a new function dss_get_dispc() to retrieve
the DISPC corresponding to the DSS.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>

Remove the global dispc ops variable by storing it in the dss_device
structure.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>