Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 04 7月, 2019 1 次提交
  3. 03 7月, 2019 4 次提交
  5. 29 6月, 2019 1 次提交
  7. 12 6月, 2019 1 次提交
  9. 15 4月, 2019 1 次提交
  11. 13 12月, 2018 2 次提交
  13. 27 7月, 2018 1 次提交
  15. 24 7月, 2018 1 次提交
  17. 09 6月, 2018 1 次提交
  19. 07 6月, 2018 1 次提交
    • D
      xfs: convert to SPDX license tags · 0b61f8a4
      由 Dave Chinner 提交于 
      Remove the verbose license text from XFS files and replace them
with SPDX tags. This does not change the license of any of the code,
merely refers to the common, up-to-date license files in LICENSES/

This change was mostly scripted. fs/xfs/Makefile and
fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected
and modified by the following command:

for f in `git grep -l "GNU General" fs/xfs/` ; do
	echo $f
	cat $f | awk -f hdr.awk > $f.new
	mv -f $f.new $f
done

And the hdr.awk script that did the modification (including
detecting the difference between GPL-2.0 and GPL-2.0+ licenses)
is as follows:

$ cat hdr.awk
BEGIN {
	hdr = 1.0
	tag = "GPL-2.0"
	str = ""
}

/^ \* This program is free software/ {
	hdr = 2.0;
	next
}

/any later version./ {
	tag = "GPL-2.0+"
	next
}

/^ \*\// {
	if (hdr > 0.0) {
		print "// SPDX-License-Identifier: " tag
		print str
		print $0
		str=""
		hdr = 0.0
		next
	}
	print $0
	next
}

/^ \* / {
	if (hdr > 1.0)
		next
	if (hdr > 0.0) {
		if (str != "")
			str = str "\n"
		str = str $0
		next
	}
	print $0
	next
}

/^ \*/ {
	if (hdr > 0.0)
		next
	print $0
	next
}

// {
	if (hdr > 0.0) {
		if (str != "")
			str = str "\n"
		str = str $0
		next
	}
	print $0
}

END { }
$
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
      0b61f8a4
  21. 27 10月, 2017 3 次提交
  23. 20 6月, 2017 1 次提交
  25. 04 4月, 2017 2 次提交
  27. 08 3月, 2017 1 次提交
  29. 06 10月, 2016 1 次提交
    • D
      xfs: create a separate cow extent size hint for the allocator · f7ca3522
      由 Darrick J. Wong 提交于 
      Create a per-inode extent size allocator hint for copy-on-write.  This
hint is separate from the existing extent size hint so that CoW can
take advantage of the fragmentation-reducing properties of extent size
hints without disabling delalloc for regular writes.

The extent size hint that's fed to the allocator during a copy on
write operation is the greater of the cowextsize and regular extsize
hint.

During reflink, if we're sharing the entire source file to the entire
destination file and the destination file doesn't already have a
cowextsize hint, propagate the source file's cowextsize hint to the
destination file.

Furthermore, zero the bulkstat buffer prior to setting the fields
so that we don't copy kernel memory contents into userspace.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
      f7ca3522
  31. 09 2月, 2016 4 次提交
  33. 19 8月, 2015 1 次提交
    • B
      xfs: fix btree cursor error cleanups · f307080a
      由 Brian Foster 提交于 
      The btree cursor cleanup function takes an error parameter that
affects how buffers are released from the cursor. All buffers are
released in the event of error. Several callers do not specify the
XFS_BTREE_ERROR flag in the event of error, however. This can cause
buffers to hang around locked or with an elevated hold count and
thus lead to umount hangs in the event of errors.

Fix up the xfs_btree_del_cursor() callers to pass XFS_BTREE_ERROR if
the cursor is being torn down due to error.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <david@fromorbit.com>
      f307080a
  35. 29 5月, 2015 1 次提交
    • B
      xfs: use actual inode count for sparse records in bulkstat/inumbers · 12d0714d
      由 Brian Foster 提交于 
      The bulkstat and inumbers mechanisms make the assumption that inode
records consist of a full 64 inode chunk in several places. For example,
this is used to track how many inodes have been processed overall as
well as to determine whether a record has allocated inodes that must be
handled.

This assumption is invalid for sparse inode records. While sparse inodes
will be marked as free in the ir_free mask, they are not accounted as
free in ir_freecount because they cannot be allocated. Therefore,
ir_freecount may be less than 64 inodes in an inode record for which all
physically allocated inodes are free (and in turn ir_freecount < 64 does
not signify that the record has allocated inodes).

The new in-core inobt record format includes the ir_count field. This
holds the number of true, physical inodes tracked by the record. The
in-core ir_count field is always valid as it is hardcoded to
XFS_INODES_PER_CHUNK when sparse inodes is not enabled. Use ir_count to
handle inode records correctly in bulkstat in a generic manner.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>
      12d0714d
  37. 23 2月, 2015 1 次提交
  39. 04 12月, 2014 1 次提交
  41. 28 11月, 2014 4 次提交
  43. 07 11月, 2014 6 次提交
    • D
      xfs: track bulkstat progress by agino · 00275899
      由 Dave Chinner 提交于 
      The bulkstat main loop progress is tracked by the "lastino"
variable, which is a full 64 bit inode. However, the loop actually
works on agno/agino pairs, and so there's a significant disconnect
between the rest of the loop and the main cursor. Convert this to
use the agino, and pass the agino into the chunk formatting function
and convert it too.

This gets rid of the inconsistency in the loop processing, and
finally makes it simple for us to skip inodes at any point in the
loop simply by incrementing the agino cursor.

cc: <stable@vger.kernel.org> # 3.17
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>
      00275899
    • D
      xfs: bulkstat error handling is broken · febe3cbe
      由 Dave Chinner 提交于 
      The error propagation is a horror - xfs_bulkstat() returns
a rval variable which is only set if there are formatter errors. Any
sort of btree walk error or corruption will cause the bulkstat walk
to terminate but will not pass an error back to userspace. Worse
is the fact that formatter errors will also be ignored if any inodes
were correctly formatted into the user buffer.

Hence bulkstat can fail badly yet still report success to userspace.
This causes significant issues with xfsdump not dumping everything
in the filesystem yet reporting success. It's not until a restore
fails that there is any indication that the dump was bad and tha
bulkstat failed. This patch now triggers xfsdump to fail with
bulkstat errors rather than silently missing files in the dump.

This now causes bulkstat to fail when the lastino cookie does not
fall inside an existing inode chunk. The pre-3.17 code tolerated
that error by allowing the code to move to the next inode chunk
as the agino target is guaranteed to fall into the next btree
record.

With the fixes up to this point in the series, xfsdump now passes on
the troublesome filesystem image that exposes all these bugs.

cc: <stable@vger.kernel.org>
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
      febe3cbe
    • D
      xfs: bulkstat main loop logic is a mess · 6e57c542
      由 Dave Chinner 提交于 
      There are a bunch of variables tha tare more wildy scoped than they
need to be, obfuscated user buffer checks and tortured "next inode"
tracking. This all needs cleaning up to expose the real issues that
need fixing.

cc: <stable@vger.kernel.org> # 3.17
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>
      6e57c542
    • D
      xfs: bulkstat chunk-formatter has issues · 2b831ac6
      由 Dave Chinner 提交于 
      The loop construct has issues:
	- clustidx is completely unused, so remove it.
	- the loop tries to be smart by terminating when the
	  "freecount" tells it that all inodes are free. Just drop
	  it as in most cases we have to scan all inodes in the
	  chunk anyway.
	- move the "user buffer left" condition check to the only
	  point where we consume space int eh user buffer.
	- move the initialisation of agino out of the loop, leaving
	  just a simple loop control logic using the clusteridx.

Also, double handling of the user buffer variables leads to problems
tracking the current state - use the cursor variables directly
rather than keeping local copies and then having to update the
cursor before returning.

cc: <stable@vger.kernel.org> # 3.17
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>
      2b831ac6
    • D
      xfs: bulkstat chunk formatting cursor is broken · bf4a5af2
      由 Dave Chinner 提交于 
      The xfs_bulkstat_agichunk formatting cursor takes buffer values from
the main loop and passes them via the structure to the chunk
formatter, and the writes the changed values back into the main loop
local variables. Unfortunately, this complex dance is full of corner
cases that aren't handled correctly.

The biggest problem is that it is double handling the information in
both the main loop and the chunk formatting function, leading to
inconsistent updates and endless loops where progress is not made.

To fix this, push the struct xfs_bulkstat_agichunk outwards to be
the primary holder of user buffer information. this removes the
double handling in the main loop.

Also, pass the last inode processed by the chunk formatter as a
separate parameter as it purely an output variable and is not
related to the user buffer consumption cursor.

Finally, the chunk formatting code is not shared by anyone, so make
it local to xfs_itable.c.

cc: <stable@vger.kernel.org> # 3.17
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>
      bf4a5af2
    • D
      xfs: bulkstat btree walk doesn't terminate · afa947cb
      由 Dave Chinner 提交于 
      The bulkstat code has several different ways of detecting the end of
an AG when doing a walk. They are not consistently detected, and the
code that checks for the end of AG conditions is not consistently
coded. Hence the are conditions where the walk code can get stuck in
an endless loop making no progress and not triggering any
termination conditions.

Convert all the "tmp/i" status return codes from btree operations
to a common name (stat) and apply end-of-ag detection to these
operations consistently.

cc: <stable@vger.kernel.org> # 3.17
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>
      afa947cb