Regular interrupt return restores NVGPRS whereas lite returns do not.
This is clumsy: most interrupts can return without restoring NVGPRS in
most of the time, but there are special cases that require it (when
registers have been modified by the kernel). So change interrupt
return to not restore NVGPRS, and have interrupt handlers restore them
explicitly in the cases that requires it.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-30-npiggin@gmail.com

Implement the bulk of interrupt return logic in C. The asm return code
must handle a few cases: restoring full GPRs, and emulating stack
store.

The stack store emulation is significantly simplfied, rather than
creating a new return frame and switching to that before performing
the store, it uses the PACA to keep a scratch register around to
perform the store.

The asm return code is moved into 64e for now. The new logic has made
allowance for 64e, but I don't have a full environment that works well
to test it, and even booting in emulated qemu is not great for stress
testing. 64e shouldn't be too far off working with this, given a bit
more testing and auditing of the logic.

This is slightly faster on a POWER9 (page fault speed increases about
1.1%), probably due to reduced mtmsrd.

mpe: Includes fixes from Nick for _TIF_EMULATE_STACK_STORE
handling (including the fast_interrupt_return path), to remove
trace_hardirqs_on(), and fixes the interrupt-return part of the
MSR_VSX restore bug caught by tm-unavailable selftest.

mpe: Incorporate fix from Nick:

The return-to-kernel path has to replay any soft-pending interrupts if
it is returning to a context that had interrupts soft-enabled. It has
to do this carefully and avoid plain enabling interrupts if this is an
irq context, which can cause multiple nesting of interrupts on the
stack, and other unexpected issues.

The code which avoided this case got the soft-mask state wrong, and
marked interrupts as enabled before going around again to retry. This
seems to be mostly harmless except when PREEMPT=y, this calls
preempt_schedule_irq with irqs apparently enabled and runs into a BUG
in kernel/sched/core.c
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichal Suchanek <msuchanek@suse.de>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-29-npiggin@gmail.com

When local_irq_enable() finds a pending soft-masked interrupt, it
"replays" it by setting up registers like the initial interrupt entry,
then calls into the low level handler to set up an interrupt stack
frame and process the interrupt.

This is not necessary, and uses more stack than needed. The high level
interrupt handler can be called directly from C, with just pt_regs set
up on stack. This should be faster and use less stack.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-28-npiggin@gmail.com

Kernel addresses and potentially other sensitive data could be leaked
in volatile registers after a syscall.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-27-npiggin@gmail.com

System call entry and particularly exit code is beyond the limit of
what is reasonable to implement in asm.

This conversion moves all conditional branches out of the asm code,
except for the case that all GPRs should be restored at exit.

Null syscall test is about 5% faster after this patch, because the
exit work is handled under local_irq_disable, and the hard mask and
pending interrupt replay is handled after that, which avoids games
with MSR.

mpe: Includes subsequent fixes from Nick:

This fixes 4 issues caught by TM selftests. First was a tm-syscall bug
that hit due to tabort_syscall being called after interrupts were
reconciled (in a subsequent patch), which led to interrupts being
enabled before tabort_syscall was called. Rather than going through an
un-reconciling interrupts for the return, I just go back to putting
the test early in asm, the C-ification of that wasn't a big win
anyway.

Second is the syscall return _TIF_USER_WORK_MASK check would go into
an infinite loop if _TIF_RESTORE_TM became set. The asm code uses
_TIF_USER_WORK_MASK to brach to slowpath which includes
restore_tm_state.

Third is system call return was not calling restore_tm_state, I missed
this completely (alhtough it's in the return from interrupt C
conversion because when the asm syscall code encountered problems it
would branch to the interrupt return code.

Fourth is MSR_VEC missing from restore_math, which was caught by
tm-unavailable selftest taking an unexpected facility unavailable
interrupt when testing VSX unavailble exception with MSR.FP=1
MSR.VEC=1. Fourth case also has a fixup in a subsequent patch.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichal Suchanek <msuchanek@suse.de>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-26-npiggin@gmail.com

Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-25-npiggin@gmail.com

powerpc has an optimisation where interrupts avoid saving the
non-volatile (or callee saved) registers to the interrupt stack frame
if they are not required.

Two problems with this are that an interrupt does not always know
whether it will need non-volatiles; and if it does need them, they can
only be saved from the entry-scoped asm code (because we don't control
what the C compiler does with these registers).

system calls are the most difficult: some system calls always require
all registers (e.g., fork, to copy regs into the child). Sometimes
registers are only required under certain conditions (e.g., tracing,
signal delivery). These cases require ugly logic in the call
chains (e.g., ppc_fork), and require a lot of logic to be implemented
in asm.

So remove the optimisation for system calls, and always save NVGPRs on
entry. Modern high performance CPUs are not so sensitive, because the
stores are dense in cache and can be hidden by other expensive work in
the syscall path -- the null syscall selftests benchmark on POWER9 is
not slowed (124.40ns before and 123.64ns after, i.e., within the
noise).

Other interrupts retain the NVGPR optimisation for now.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-24-npiggin@gmail.com

The soft NMI handler does not reconcile interrupt state, so it should
not return via the normal ret_from_except path. Return like other NMIs,
using the EXCEPTION_RESTORE_REGS macro.

This becomes important when the scv interrupt is implemented, which
must handle soft-masked interrupts that have r13 set to something
other than the PACA -- returning to kernel in this case must restore
r13.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-23-npiggin@gmail.com

This adds IRQ_HARD_DIS to irq_happened. Although it doesn't seem to
matter much because we're not allowed to enable irqs in an NMI
handler, the soft-irq debugging code is becoming more strict about
ensuring IRQ_HARD_DIS is in sync with MSR[EE], this may help avoid
asserts or other issues.

Add a comment explaining why MCE does not have this. Early machine
check is generally much smaller and more contained code which will
explode if you look at it wrong anyway as it runs in real mode, though
there's an argument that we should do similar reconciling for the MCE
as well.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-22-npiggin@gmail.com

Apart from SRESET, MCE, and syscall (hcall variant), the SRR type
interrupts are not escalated to hypervisor mode, so are delivered to
the OS.

When running PR KVM, the OS is the hypervisor, and the guest runs with
MSR[PR]=1 (ie. usermode), so these interrupts must test if a guest was
running when interrupted. These tests are required at the real-mode
entry points because the PR KVM host runs with LPCR[AIL]=0.

In HV KVM and nested HV KVM, the guest always receives these
interrupts, so there is no need for the host to make this test. So
remove the tests if PR KVM is not configured.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-21-npiggin@gmail.com

A few of the non-standard handlers are left uncommented. Some more
description could be added to some.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-20-npiggin@gmail.com

Remove more magic numbers and replace with nicely named bools.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-19-npiggin@gmail.com

The reduction in interrupt entry size allows some handlers to be
re-inlined.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-18-npiggin@gmail.com

The hdec interrupt handler is reported to sometimes fire in Linux if
KVM leaves it pending after a guest exists. This is harmless, so there
is a no-op handler for it.

The interrupt handler currently uses the regular kernel stack. Change
this to avoid touching the stack entirely.

This should be the last place where the regular Linux stack can be
accessed with asynchronous interrupts (including PMI) soft-masked.
It might be possible to take advantage of this invariant, e.g., to
context switch the kernel stack SLB entry without clearing MSR[EE].
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-17-npiggin@gmail.com

Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-16-npiggin@gmail.com

These are used infrequently enough they don't provide much help, so
inline them.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-15-npiggin@gmail.com

Replace IEARLY=1 and IEARLY=2 with IBRANCH_COMMON, which controls if
the entry code branches to a common handler; and IREALMODE_COMMON,
which controls whether the common handler should remain in real mode.

These special cases no longer avoid loading the SRR registers, there
is no point as most of them load the registers immediately anyway.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-14-npiggin@gmail.com

This allows more code to be moved out of unrelocated regions. The
system call KVMTEST is changed to be open-coded and remain in the
tramp area to avoid having to move it to entry_64.S. The custom nature
of the system call entry code means the hcall case can be made more
streamlined than regular interrupt handlers.

mpe: Incorporate fix from Nick:

Moving KVM test to the common entry code missed the case of HMI and
MCE, which do not do __GEN_COMMON_ENTRY (because they don't want to
switch to virt mode).

This means a MCE or HMI exception that is taken while KVM is running a
guest context will not be switched out of that context, and KVM won't
be notified. Found by running sigfuz in guest with patched host on
POWER9 DD2.3, which causes some TM related HMI interrupts (which are
expected and supposed to be handled by KVM).

This fix adds a __GEN_REALMODE_COMMON_ENTRY for those handlers to add
the KVM test. This makes them look a little more like other handlers
that all use __GEN_COMMON_ENTRY.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-13-npiggin@gmail.com

As well as moving code out of the unrelocated vectors, this allows the
masked handlers to be moved to common code, and allows the soft_nmi
handler to be generated more like a regular handler.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-12-npiggin@gmail.com

The real mode interrupt entry points currently use rfid to branch to
the common handler in virtual mode. This is a significant amount of
code, and forces other code (notably the KVM test) to live in the
real mode handler.

In the interest of minimising the amount of code that runs unrelocated
move the switch to virt mode into the common code, and do it with
mtmsrd, which avoids clobbering SRRs (although the post-KVMTEST
performance of real-mode interrupt handlers is not a big concern these
days).

This requires CTR to always be saved (real-mode needs to reach 0xc...)
but that's not a huge impact these days. It could be optimized away in
future.

mpe: Incorporate fix from Nick:

It's possible for interrupts to be replayed when TM is enabled and
suspended, for example rt_sigreturn, where the mtmsrd MSR_KERNEL in
the real-mode entry point to the common handler causes a TM Bad Thing
exception (due to attempting to clear suspended).

The fix for this is to have replay interrupts go to the _virt entry
point and skip the mtmsrd, which matches what happens before this
patch.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-11-npiggin@gmail.com

Rather than using DAR=2 to select the i-side registers, add an
explicit option.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-10-npiggin@gmail.com

Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-9-npiggin@gmail.com

Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-8-npiggin@gmail.com

Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-7-npiggin@gmail.com

Aside from label names and BUG line numbers, the generated code change
is an additional HMI KVM handler added for the "late" KVM handler,
because early and late HMI generation is achieved by defining two
different interrupt types.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-6-npiggin@gmail.com

These don't provide a large amount of code sharing. Removing them
makes code easier to shuffle around. For example, some of the common
instructions will be moved into the common code gen macro.

No generated code change.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-5-npiggin@gmail.com

No generated code change.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-4-npiggin@gmail.com

No generated code change.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-3-npiggin@gmail.com

The code generation macro arguments are difficult to read, and
defaults can't easily be used.

This introduces a block where parameters can be set for interrupt
handler code generation by the subsequent macros, and adds the first
generation macro for interrupt entry.

One interrupt handler is converted to the new macros to demonstrate
the change, the rest will be coverted all at once.

No generated code change.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-2-npiggin@gmail.com

Before:

  WARNING: CPU: 0 PID: 494 at arch/powerpc/kernel/irq.c:343
  CPU: 0 PID: 494 Comm: a Tainted: G        W
  NIP:  c00000000001ed2c LR: c000000000d13190 CTR: c00000000003f910
  REGS: c0000001fffd3870 TRAP: 0700   Tainted: G        W
  MSR:  8000000000021003 <SF,ME,RI,LE>  CR: 28000488  XER: 00000000
  CFAR: c00000000001ec90 IRQMASK: 0
  GPR00: c000000000aeb12c c0000001fffd3b00 c0000000012ba300 0000000000000000
  GPR04: 0000000000000000 0000000000000000 000000010bd207c8 6b00696e74657272
  GPR08: 0000000000000000 0000000000000000 0000000000000000 efbeadde00000000
  GPR12: 0000000000000000 c0000000014a0000 0000000000000000 0000000000000000
  GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR24: 0000000000000000 0000000000000000 0000000000000000 000000010bd207bc
  GPR28: 0000000000000000 c00000000148a898 0000000000000000 c0000001ffff3f50
  NIP [c00000000001ed2c] arch_local_irq_restore.part.0+0xac/0x100
  LR [c000000000d13190] _raw_spin_unlock_irqrestore+0x50/0xc0
  Call Trace:
  Instruction dump:
  60000000 7d2000a6 71298000 41820068 39200002 7d210164 4bffff9c 60000000
  60000000 7d2000a6 71298000 4c820020 <0fe00000> 4e800020 60000000 60000000

After:

  WARNING: CPU: 0 PID: 499 at arch/powerpc/kernel/irq.c:343
  CPU: 0 PID: 499 Comm: a Not tainted
  NIP:  c00000000001ed2c LR: c000000000d13210 CTR: c00000000003f980
  REGS: c0000001fffd3870 TRAP: 0700   Not tainted
  MSR:  8000000000021003 <SF,ME,RI,LE>  CR: 28000488  XER: 00000000
  CFAR: c00000000001ec90 IRQMASK: 0
  GPR00: c000000000aeb1ac c0000001fffd3b00 c0000000012ba300 0000000000000000
  GPR04: 0000000000000000 0000000000000000 00000001347607c8 6b00696e74657272
  GPR08: 0000000000000000 0000000000000000 0000000000000000 efbeadde00000000
  GPR12: 0000000000000000 c0000000014a0000 0000000000000000 0000000000000000
  GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR24: 0000000000000000 0000000000000000 0000000000000000 00000001347607bc
  GPR28: 0000000000000000 c00000000148a898 0000000000000000 c0000001ffff3f50
  NIP [c00000000001ed2c] arch_local_irq_restore.part.0+0xac/0x100
  LR [c000000000d13210] _raw_spin_unlock_irqrestore+0x50/0xc0
  Call Trace:
  [c0000001fffd3b20] [c000000000aeb1ac] of_find_property+0x6c/0x90
  [c0000001fffd3b70] [c000000000aeb1f0] of_get_property+0x20/0x40
  [c0000001fffd3b90] [c000000000042cdc] rtas_token+0x3c/0x70
  [c0000001fffd3bb0] [c0000000000dc318] fwnmi_release_errinfo+0x28/0x70
  [c0000001fffd3c10] [c0000000000dcd8c] pseries_machine_check_realmode+0x1dc/0x540
  [c0000001fffd3cd0] [c00000000003fe04] machine_check_early+0x54/0x70
  [c0000001fffd3d00] [c000000000008384] machine_check_early_common+0x134/0x1f0
  --- interrupt: 200 at 0x1347607c8
      LR = 0x7fffafbd8328
  Instruction dump:
  60000000 7d2000a6 71298000 41820068 39200002 7d210164 4bffff9c 60000000
  60000000 7d2000a6 71298000 4c820020 <0fe00000> 4e800020 60000000 60000000
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200325104144.158362-1-npiggin@gmail.com

In restore_tm_sigcontexts() we take the trap value directly from the
user sigcontext with no checking:

	err |= __get_user(regs->trap, &sc->gp_regs[PT_TRAP]);

This means we can be in the kernel with an arbitrary regs->trap value.

Although that's not immediately problematic, there is a risk we could
trigger one of the uses of CHECK_FULL_REGS():

	#define CHECK_FULL_REGS(regs)	BUG_ON(regs->trap & 1)

It can also cause us to unnecessarily save non-volatile GPRs again in
save_nvgprs(), which shouldn't be problematic but is still wrong.

It's also possible it could trick the syscall restart machinery, which
relies on regs->trap not being == 0xc00 (see 9a81c16b ("powerpc:
fix double syscall restarts")), though I haven't been able to make
that happen.

Finally it doesn't match the behaviour of the non-TM case, in
restore_sigcontext() which zeroes regs->trap.

So change restore_tm_sigcontexts() to zero regs->trap.

This was discovered while testing Nick's upcoming rewrite of the
syscall entry path. In that series the call to save_nvgprs() prior to
signal handling (do_notify_resume()) is removed, which leaves the
low-bit of regs->trap uncleared which can then trigger the FULL_REGS()
WARNs in setup_tm_sigcontexts().

Fixes: 2b0a576d ("powerpc: Add new transactional memory state to the signal context")
Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200401023836.3286664-1-mpe@ellerman.id.au

As per ISA an isync is only needed on instruction cache block
invalidate. Remove the same from dcache invalidate.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200320103242.229223-1-aneesh.kumar@linux.ibm.com

.globl sets the symbol binding to STB_GLOBAL while .weak sets the
binding to STB_WEAK. GNU as let .weak override .globl since
binutils-gdb 5ca547dc2399a0a5d9f20626d4bf5547c3ccfddd (1996). Clang
integrated assembler let the last win but it may error in the future.

Since it is a convention that only one binding directive is used, just
delete .globl.

Fixes: ee9d21b3 ("powerpc/boot: Ensure _zimage_start is a weak symbol")
Signed-off-by: NFangrui Song <maskray@google.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200325164257.170229-1-maskray@google.com

memcpy_mcsafe has been implemented for power machines which is used
by pmem infrastructure, so that an UE encountered during memcpy from
pmem devices would not result in panic instead a right error code
is returned. The implementation expects machine check handler to ignore
the event and set nip to continue the execution from fixup code.

Appropriate changes are already made to powernv machine check handler,
make similar changes to pseries machine check handler to ignore the
the event and set nip to continue execution at the fixup entry if we
hit UE at an instruction with a fixup entry.

while we are at it, have a common function which searches the exception
table entry and updates nip with fixup address, and any future common
changes can be made in this function that are valid for both architectures.

powernv changes are made by
commit 895e3dce ("powerpc/mce: Handle UE event for memcpy_mcsafe")
Reviewed-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Reviewed-by: NSantosh S <santosh@fossix.org>
Signed-off-by: NGanesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200326184916.31172-1-ganeshgr@linux.ibm.com

We can avoid the #ifdef by using IS_ENABLED() in the existing
condition check.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Reviewed-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200313112020.28235-2-mpe@ellerman.id.au

We don't need the NULL check of np, the result is the same because the
OF helpers cope with NULL, of_node_to_nid(NULL) == NUMA_NO_NODE (-1).
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Reviewed-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200313112020.28235-1-mpe@ellerman.id.au

It's over 10 years since the last commit from Vitaly, so I suspect
he's moved on to other things.

Christophe has been the primary contributor to 8xx in the last several
years, so anoint him as the maintainer.

Remove the dead penguingppc.org link.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Acked-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/20200225092534.9587-1-mpe@ellerman.id.au

Scott said he was still maintaining this "sort of", so change the
status to Odd Fixes.

Kumar has long ago moved on to greener pastures.

Remove the dead penguinppc.org link.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Acked-by: NScott Wood <oss@buserror.net>
Link: https://lore.kernel.org/r/20200224233146.23734-8-mpe@ellerman.id.au

Ben is no longer actively maintaining the powermac code, but we know
where to find him if something really needs attention.

The www.penguinppc.org link is dead so remove it.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200224233146.23734-7-mpe@ellerman.id.au

It's several years since the last commit from Anatolij, so mark
MPC5XXX as "Odd Fixes" rather than "Maintained".

Also the git link no longer works so remove it.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Acked-by: NAnatolij Gustschin <agust@denx.de>
Link: https://lore.kernel.org/r/20200224233146.23734-6-mpe@ellerman.id.au