- 13 2月, 2012 8 次提交
-
-
由 Andre Guedes 提交于
This patch adds a new parameter to mgmt_device_found() to inform the length of 'eir' pointer. EIR data from LE advertising report event doesn't have a fixed length as EIR data from extended inquiry result event does. We needed to change mgmt_device_found() so it copies 'eir_len' bytes instead of HCI_MAX_EIR_LENGTH. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Johan Hedberg 提交于
This patch makes sure that devices with stronger signal (RSSI closer to 0) are sorted first in the resolve list and will therefore get their names resolved first during device discovery. Since it's more likely that the device the user is trying to discover has a strong signal due to its proximity this ensures that the user gets the "device found" event for it more quickly. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
There's no point in exposing these to user-space (which is what happens to everything in hdev->flags) so move them to dev_flags instead. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
This patch adds the necessary logic to perform name lookups after inquiry completes. This is done by checking for entries in the resolve list after each inquiry complete and remote name complete HCI event. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
This patch adds proper state tracking to the device discovery process. This makes it possible to return appropriate errors when trying to stop a non-active discovery or start discovery when it is already ongoing. Once name resolving is implemented this also makes it possible to know what the right action to do is when a remote name lookup is cancelled. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
This struct is used for not just inquiry caching but also for general device discovery state tracking so it's better to rename it to something more appropriate. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
This patch adds initial support for mgmt_confirm_name. It adds the necessary tracking of the name state by extending the inquiry cache. The actual name resolving operation (to be done once inquiry is finished) is not yet part of this patch. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
The EIR defines are needed also outside of mgmt.c (e.g. in hci_event.c to check if EIR data has the complete name) so it's better to have them in a single public place, i.e. hci.h. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 03 1月, 2012 2 次提交
-
-
由 Andre Guedes 提交于
Stop Discovery Command Status Event should use mgmt status code. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Acked-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
This patch renames hdev->extfeatures to hdev->host_features since it holds the extended features Page 1 (aka host features). Signed-off-by: NAndre Guedes <aguedespe@gmail.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 23 12月, 2011 1 次提交
-
-
由 Brian Gix 提交于
Low Energy pairing is performed through the SMP (Security Manager Protocol) mechanism rather than HCI. Signed-off-by: NBrian Gix <bgix@codeaurora.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 19 12月, 2011 9 次提交
-
-
由 Johan Hedberg 提交于
This patch fixes user_confirm_neg_reply to use the appropriate struct for accessing the call parameters. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
We do not want the service cache to be enabled indefinitely after mgmt_read_info is called. To solve this a timer is added which will automatically disable the cache if mgmt_set_dev_class isn't called within 5 seconds of calling mgmt_read_info. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
Due to the upcoming addition of a service cache timer the functions to update the EIR and CoD need to be higher up in mgmt.c in order to avoid unnecessary forward-declarations. This patch simply moves code around without any other changes in order to make subsequent patches more readable. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
Instead of having an explicit service cache command we can make the mgmt API simpler by implicitly enabling the cache when mgmt_read_info is called for the first time and disabling it when mgmt_set_dev_class is called. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
Fast connectable is logically after the connectable property so that's where it should show up in the code as well (it's also after connectable in the settings bitfield). Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch updates the mgmt_read_info and related messages to the latest management API which uses a bitfield of settings instead of individual boolean values. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
hdev->workqueue should be only for rx/tx, so move this one out. Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
hdev->workqueue will be only for for rx/tx/cmd processing, all other small works should go to the system workqueue for now. Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Now we run everything in HCI in process context, so it's a better idea use mutex instead spin_lock. The macro remains hci_dev_lock() (and I got rid of hci_dev_lock_bh()), of course. Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 01 12月, 2011 1 次提交
-
-
由 Brian Gix 提交于
For some MITM protection pairing scenarios, the user is required to enter or accept a 6 digit passkey. Signed-off-by: NBrian Gix <bgix@codeaurora.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 22 11月, 2011 2 次提交
-
-
由 Brian Gix 提交于
Low Energy (LE) pairing responses must be recognized and handled differently from BR/EDR pairing responses. BR/EDR responses are handled via HCI commands by the LMP layer, and LE responses are handled by the Host. Signed-off-by: NBrian Gix <bgix@codeaurora.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Brian Gix 提交于
There are 4 possible User Responses to pairing requests, and they all share the same checks and handling. This restructures the handling of the two Confirm responses in preperation for the second two. Signed-off-by: NBrian Gix <bgix@codeaurora.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 17 11月, 2011 8 次提交
-
-
由 Johan Hedberg 提交于
The mgmt_start_discovery command contains the type of discovery that should be started so this should be passed to the start_discovery function. This patch doesn't yet add any action depending on the type of the requested discovery. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
The command complete event was completely missing for this command. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
The management protocol uses a single byte for error codes (aka command status). In some places this value is directly copied from HCI and in other a POSIX error number is used. This makes it impossible for user-space to uniquily decipher the meaning of an error. To solve this issue a new mgmt-specific set of error codes is added along with a conversion table for HCI status values. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
When the adapter state is already what is requested it's more friendly to user-space to simply report success than to send a EALREADY error message. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
When possible cmd_complete should be returned instead of cmd_status since it contains the remote address (this helps user-space track what exactly failed). Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
The kernel needs to know whether it should connect to a device over BR/EDR or over LE. This is particularly important in the future when dual-mode device may be connectable also over LE. It is also important if/when we decide to move the LE advertisement cache from the kernel into user-space. Adding the type to the mgmt command also ensures conformance with the latest mgmt API spec. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
This patches creates mgmt_stop_discovery_failed() which removes pending MGMT_OP_STOP_DISCOVERY commands and sends proper command status events. This patch also fixes the MGMT_OP_STOP_DISCOVERY command leak in case cancel inquiry fails. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
This patch renames the function mgmt_inquiry_failed() to mgmt_start_discovery_failed(). This function is more related to MGMT_OP_START_DISCOVERY command handling than to inquiry. Besides, this functions will be reused by LE based discovery procedures in case of failure. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 11 11月, 2011 4 次提交
-
-
由 Johan Hedberg 提交于
Since disconnecting may fail the status needs to be communicated to user space. This also updates the implementation to match the latest mgmt API specification. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
Since the command can fail we need to have a proper response with the remote address and a failure status for it. This also updates it to conform to the latest mgmt API spec. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
The hci_conn callbacks are called with the hci_dev lock already held so no locking should be attempted in them. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
It's necessary to know the distinction between public and random LE addresses so the mgmt interface also needs to distinguish between them. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 09 11月, 2011 5 次提交
-
-
由 Johan Hedberg 提交于
Now that pending commands are hci_dev specific there's no need to check whether a command matches hci_dev when iterating through them. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
For consistency the integer type should be u16 and not __u16. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
The cancel_delayed_work_sync function should not be used if we hold any locks. Luckily all places where this is the case it is also safe to use the non-sync version. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
Now that the pending commands are within struct hci_dev we can properly control access to them throught the hci_dev locking mechanism. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch moves the pending management command list (previously global to mgmt.c) into struct hci_dev. This makes it possible to do proper locking when accessing it (through the existing hci_dev locks) and thereby avoid race conditions. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-