Add tests that verify that drm_internal_framebuffer_create creates
buffers correctly by creating a dummy drm_device with a mock function
for the fb_create callback.

To decide if a buffer has been created or not it just checks if
fb_create callback has been called for the particular drm_mode_fb_cmd2
that's being tested.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NAlexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101151051.1509-8-alexandru-cosmin.gheorghe@arm.com

If we want to be able to write drmselftests for non-static core
functions that are not intended to be used by drivers we need this
functions to be exported.

This adds a macro that is tied of CONFIG_DRM_DEBUG_SELFTEST, and uses
that to export drm_internal_framebuffer_create, in order for
subsequent patches to be able to test it.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NAlexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101151051.1509-7-alexandru-cosmin.gheorghe@arm.com

Add selftests for the following newly added functions:
 - drm_format_info_block_width
 - drm_format_info_block_height
 - drm_format_info_min_pitch
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NAlexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101151051.1509-6-alexandru-cosmin.gheorghe@arm.com

For formats that are supported only with non-linear modifiers it
doesn't make to much sense to define cpp or char_per_block, so that
will be set to 0.

This patch adds a restriction to force having a modifier attached when
cpp/char_per_block is 0, and to bypass checking the pitch restriction.

This had been discussed here.
[1] https://people.freedesktop.org/~cbrill/dri-log/?channel=dri-devel&highlight_names=&date=2018-09-13&show_html=trueReviewed-by: NBrian Starkey <brian.starkey@arm.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NAlexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101151051.1509-5-alexandru-cosmin.gheorghe@arm.com

Enable the following formats
- DRM_FORMAT_X0L0: DP650
- DRM_FORMAT_X0L2: DP550, DP650
Reviewed-by: NBrian Starkey <brian.starkey@arm.com>
Signed-off-by: NAlexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101151051.1509-4-alexandru-cosmin.gheorghe@arm.com

Mali-DP implements a number of tiled yuv formats which are not
currently described in drm_fourcc.h.
This adds those definitions and describes their memory layout by
using the newly added char_per_block, block_w, block_h.
Reviewed-by: NBrian Starkey <brian.starkey@arm.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NAlexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101151051.1509-3-alexandru-cosmin.gheorghe@arm.com

For some pixel formats .cpp structure in drm_format info it's not
enough to describe the peculiarities of the pixel layout, for example
tiled formats or packed formats at bit level.

What's implemented here is to add three new members to drm_format_info
that could describe such formats:

- char_per_block[3]
- block_w[3]
- block_h[3]

char_per_block will be put in a union alongside cpp, for transparent
compatibility  with the existing format descriptions.

Regarding, block_w and block_h they are intended to be used through
their equivalent getters drm_format_info_block_width /
drm_format_info_block_height, the reason of the getters is to abstract
the fact that for normal formats block_w and block_h will be unset/0,
but the methods will be returning 1.

Additionally, convenience function drm_format_info_min_pitch had been
added that computes the minimum required pitch for a given pixel
format and buffer width.

Using that the following drm core functions had been updated to
generically handle both block and non-block formats:

- drm_fb_cma_get_gem_addr: for block formats it will just return the
  beginning of the block.
- framebuffer_check: Use the newly added drm_format_info_min_pitch.
- drm_gem_fb_create_with_funcs: Use the newly added
  drm_format_info_min_pitch.
- In places where is not expecting to handle block formats, like fbdev
  helpers I just added some warnings in case the block width/height
  are greater than 1.

Changes since v3:
 - Add helper function for computing the minimum required pitch.
 - Improve/cleanup documentation

Changes since v8:
 - Fixed build on 32bits arm architectures, with:

-       return DIV_ROUND_UP((u64)buffer_width * info->char_per_block[plane],
+       return DIV_ROUND_UP_ULL((u64)buffer_width * info->char_per_block[plane],
Reviewed-by: NBrian Starkey <brian.starkey@arm.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NAlexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101170055.5433-1-alexandru-cosmin.gheorghe@arm.com

Having failed any attempts at a more generic solution,
I fall back to the very specific solution: define a simple
panel for the ARM RTSM emulated platforms.

I am doing this so we can convert all old users from the
previous fbdev driver to the PL111 DRM driver.

This works fine as far as I can test, provided the
device tree for RTSM AEMv8 is augmented accordingly.

Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: NLiviu Dudau <liviu.dudau@arm.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181026111334.3365-1-linus.walleij@linaro.org

Break line after NULL to decrease the line size.
Signed-off-by: NShayenne da Luz Moura <shayenneluzmoura@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031174424.odljb6obj25wm47d@smtp.gmail.com

The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NJyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-9-noralf@tronnes.org

The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-8-noralf@tronnes.org

The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-7-noralf@tronnes.org

The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@nxp.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NStefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-3-noralf@tronnes.org

The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NAlexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-2-noralf@tronnes.org

drivers/gpu/drm/drm_syncobj.c:181:6: warning: no previous prototype for ‘drm_syncobj_add_callback’ [-Wmissing-prototypes]
drivers/gpu/drm/drm_syncobj.c:190:6: warning: no previous prototype for ‘drm_syncobj_remove_callback’ [-Wmissing-prototypes]

Fixing that leads to

drivers/gpu/drm/drm_syncobj.c:181:13: warning: ‘drm_syncobj_add_callback’ defined but not used [-Wunused-function]

so remove the unused drm_syncobj_add_callback() entirely.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031120710.21582-1-chris@chris-wilson.co.ukReviewed-by: NChunming Zhou <david1.zhou@amd.com>

If the clipped dirty region's x/y happened to align to 256, we would
have set the top 8 bits wrong.  Noticed by inspection, not by
reproducing a bug.
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024184313.2967-4-eric@anholt.netReviewed-by: NNoralf Trønnes <noralf@tronnes.org>

I want to sort out support for tinydrm in vc4, so I needed to get a
tinydrm-appropriate panel working and this is what I had on hand.
This is derived from a combination of ili9341.c from tinydrm and
fb_hx8357d.c from staging's fbtft.

v2: Write my own register defs from the spec to not need the header
    from fbtft.  Fix spi device string to enable module autoloading.
    (Suggestions by Noralf)
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024184313.2967-3-eric@anholt.net
Reviewed-by: Noralf Trønnes <noralf@tronnes.org> (v1)

This adds a new binding for Himax HX8357D display panels. It includes
a compatible string for one display (more can be added in the future).

The YX350HV15 panel[1] is found in the Adafruit PiTFT 3.5" Touch
Screen for Raspberry Pi.

[1] https://learn.adafruit.com/adafruit-pitft-3-dot-5-touch-screen-for-raspberry-pi/downloads

This binding is closely modeled after the ili9341 binding, for a
similar product from adafruit.  The primary difference is that the
hx8357d doesn't have a reset line that I can find in the schematics.

v2: Document the "reg" property (requested by Rob), fix commit message
    typo (Noralf)
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024184313.2967-2-eric@anholt.netReviewed-by: NRob Herring <robh@kernel.org>
Acked-by: NNoralf Trønnes <noralf@tronnes.org>

Without this, the xserver relies on what the 3D driver exposes and
assumes that the display can handle it, and then the DRM driver
happily tries to scan out a tiled format.
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025162635.6689-1-eric@anholt.netAcked-by: NNoralf Trønnes <noralf@tronnes.org>

Recent qemu (latest master branch, upcoming 3.1 release) got support
for EDID data.  This patch adds guest driver support.

EDID support in qemu is not (yet) enabled by default, so please use
'qemu -device VGA,edid=on' for testing.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20181029205048.13200-1-kraxel@redhat.com

Add the Rockchip-sepcific dual-dsi setup and hook it into the VOP as well.
As described in the general dual-dsi devicetree binding, the panel should
define two input ports and point each of them to one of the used dsi-
controllers, as well as declare one of them as clock-master.
This is used to determine the dual-dsi state and get access to both
controller instances.

v6:
  handle master+slave component in dsi-attach
v5:
  use driver-internal mechanism to find dual dsi slave
v4:
  add component directly in probe when adding empty dsi slave controller
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-8-heiko@sntech.de

Allow to also drive a slave dw-mipi-dsi controller in a dual-dsi
setup. This will require additional implementation-specific
code to look up the slave instance and do specific setup.
Also will probably need code in the specific crtcs as dual-dsi
does not equal two separate dsi outputs.

To activate, the implementation-specific code should set the slave
using dw_mipi_dsi_set_slave() before calling __dw_mipi_dsi_bind().

v2:
- expect real interface number of lanes
- keep links to both master and slave
v3:
- remove unneeded separate variables
- remove unneeded second slave settings
- disable slave before master
- lane-sum calculation comments
Signed-off-by: NNickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NPhilippe Cornu <philippe.cornu@st.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-7-heiko@sntech.de

Add the ROCKCHIP DSI controller driver that uses the Synopsys DesignWare
MIPI DSI host controller bridge and remove the old separate one.

changes:

v2:
   add err_pllref, remove unnecessary encoder.enable & disable
   correct spelling mistakes
v3:
   call dw_mipi_dsi_unbind() in dw_mipi_dsi_rockchip_unbind()
   fix typo, use of_device_get_match_data(),
   change some bind() logic into probe()
   add 'dev_set_drvdata()'
v4:
  return -EINVAL when can not get best_freq
  add a clarifying comment when get vco
  add review tag
v5:
  keep our power domain enabled while touching GRF
v6:
  change func name dw_mipi_encoder_disable to
  dw_mipi_dsi_encoder_disable
v7:
  none
v8: Heiko
  add Archit's Review tag
  adapt to recent changes in the original rockchip-dsi driver
  beautify grf-handling
  split hw-setup (resources, dsi-host) from bind into probe
v2-new: Heiko
  add SPDX header instead of license blurb
  drop old versioning to not confuse people
v3-new: Heiko
  include ordering
  moved hwaccess from mode_set to enable callback
  move pllref_clk enablement to bind (needed by bridge mode_set->lane_mbps)
v4-new: Heiko
  rebase against recent rockchip-dsi changes
  move to call component_add in the new glue host-attach
Signed-off-by: NNickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: NBrian Norris <briannorris@chromium.org>
Reviewed-by: NBrian Norris <briannorris@chromium.org>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NArchit Taneja <architt@codeaurora.org>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-6-heiko@sntech.de

With the regular means of adding the dsi-component in probe it creates
a race condition with the panel probing, as the panel device only gets
created after the dsi-bus got created.

When the panel-driver is build as a module it currently fails hard as the
panel cannot be probed directly:

dw_mipi_dsi_bind()
  __dw_mipi_dsi_probe()
    creates dsi bus
    creates panel device
    triggers panel module load
    panel not probed (module not loaded or panel probe slow)
  drm_bridge_attach
    fails with -EINVAL due to empty panel_bridge

Additionally the panel probing can run concurrently with dsi bringup
making it possible that the panel can already be found but dsi-attach
hasn't finished running.

To solve that cleanly we may want to only create the component after
the panel has finished probing, by calling component_add from the
host-attach dsi callback.

As that is specific to glue drivers, add a new struct for host_ops
so that glue drivers can tell the bridge to call specific functions
after the common host-attach and before the common host-detach run.
Suggested-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-4-heiko@sntech.de

__dw_mipi_dsi_probe() does all the grabbing of resources and does it using
devm-helpers. So this is happening on each try of master bringup possibly
slowing down things a lot.

Drivers using the component framework may instead want to call
dw_mipi_dsi_probe separately in their probe function to setup resources
early. That way the dsi bus also gets created earlier and also not
recreated on each bind-try, so that attached panels can load their modules
and be probed way before the bridge-attach in the bind call.

So drop the call to __dw_mipi_dsi_probe and modify the function to take
a struct dw_mipi_dsi instead of the platform-device.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-3-heiko@sntech.de

Right now the host is only unregistered when the driver is used via the
bridge api and not via the component api, leading to the host staying
registered in cases like probe deferral.

So move the host unregister to the general remove function, so that it
gets cleaned up in all cases.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NPhilippe Cornu <philippe.cornu@st.com>
Tested-by: NPhilippe Cornu <philippe.cornu@st.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-2-heiko@sntech.de

Use 'unsigned int' with bitfield instead of 'bool' to avoid alignment
issues and remove checkpatch.pl check:

CHECK: Avoid using bool structure members because of possible alignment
issues
Signed-off-by: NShayenne da Luz Moura <shayenneluzmoura@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/fcd9d7ea7eec1ac6a3ad9ad16e0fc9ef13c089fd.1540579956.git.shayenneluzmoura@gmail.comSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add space to remove checkpath.pl error:

ERROR: space required before the open parenthesis '('
Signed-off-by: NShayenne da Luz Moura <shayenneluzmoura@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1ab3ba05c140aae01bde66f73ff1f3b78bf7dfb3.1540579956.git.shayenneluzmoura@gmail.comSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Use 'usigned int' instead of 'usigned' to remove the checkpath.pl warning:

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
Signed-off-by: NShayenne da Luz Moura <shayenneluzmoura@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/52604806eb18bc25e7e429f5b229fe8c1d271b5c.1540579956.git.shayenneluzmoura@gmail.comSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Remove extra whiteline to clean the checkpatch.pl check:

CHECK: Please don't use multiple blank lines
Signed-off-by: NShayenne da Luz Moura <shayenneluzmoura@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/5b95e1d4d515d02d01b829ddc5b3ca80af29e2e2.1540579956.git.shayenneluzmoura@gmail.comSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add whiteline after variable declarations to remove the checkpath.pl
warning:

WARNING: Missing a blank line after declarations
Signed-off-by: NShayenne da Luz Moura <shayenneluzmoura@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/a1d44c4a30f9b52d0aa7113e4e5093e843f9913b.1540579956.git.shayenneluzmoura@gmail.comSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Remove extra tab and space to clean the checkpath.pl error.

ERROR: trailing whitespace
Signed-off-by: NShayenne da Luz Moura <shayenneluzmoura@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/fb0e2237bc505c855a0a842c081a39d524c571dc.1540579956.git.shayenneluzmoura@gmail.comSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Replaced kmem_cache_alloc + memset with kmem_cache_zalloc
Signed-off-by: NSabyasachi Gupta <sabyasachi.linux@gmail.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/5bc9ff7e.1c69fb81.105c2.1fef@mx.google.comSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

It is possible to run out of memory while allocating IDs.  The current
code would create a context with an invalid ID; change it to return
-ENOMEM to userspace.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20180926160031.15721-3-willy@infradead.orgSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

These IDRs were only being used to allocate unique numbers, not to look
up pointers, so they can use the more space-efficient IDA instead.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20180926160031.15721-2-willy@infradead.org

[ kraxel: resolve conflict ]
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Move virtio_gpu_resource_id_{get,put} to virtgpu_object.c and make them
static.  Allocate and free the id on creation and destroy, drop all
other calls.  That way objects have a valid handle for the whole
lifetime of the object.

Also fixes ids leaking.  Worst offender are dumb buffers, and I think
some error paths too.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181019061847.18958-7-kraxel@redhat.com

We pass the obj anyway, so obj->hw_res_handle can be used instead
in virtio_gpu_object_attach() and virtio_gpu_cmd_create_resource().
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181019061847.18958-6-kraxel@redhat.com

Drop pointless res_id variable in virtio_gpu_resource_create_ioctl(),
just use the hw_res_handle field in virtio_gpu_object directly.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181019061847.18958-5-kraxel@redhat.com

Drop pointless resid variable in virtio_gpu_mode_dumb_create(), just use
the hw_res_handle field in virtio_gpu_object directly.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181019061847.18958-4-kraxel@redhat.com

Drop pointless resid variable in virtio_gpufb_create(), just use
the hw_res_handle field in virtio_gpu_object directly.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181019061847.18958-3-kraxel@redhat.com