- 11 5月, 2013 5 次提交
-
-
由 Linus Torvalds 提交于
Merge tag 'ecryptfs-3.10-rc1-ablkcipher' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull eCryptfs update from Tyler Hicks: "Improve performance when AES-NI (and most likely other crypto accelerators) is available by moving to the ablkcipher crypto API. The improvement is more apparent on faster storage devices. There's no noticeable change when hardware crypto is not available" * tag 'ecryptfs-3.10-rc1-ablkcipher' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: Use the ablkcipher crypto API
-
git://git.infradead.org/~dwmw2/random-2.6由 Linus Torvalds 提交于
Pull misc fixes from David Woodhouse: "This is some miscellaneous cleanups that don't really belong anywhere else (or were ignored), that have been sitting in linux-next for some time. Two of them are fixes resulting from my audit of krealloc() usage that don't seem to have elicited any response when I posted them, and the other three are patches from Artem removing dead code." * tag 'for-linus-20130509' of git://git.infradead.org/~dwmw2/random-2.6: pcmcia: remove RPX board stuff m68k: remove rpxlite stuff pcmcia: remove Motorola MBX860 support params: Fix potential memory leak in add_sysfs_param() dell-laptop: Fix krealloc() misuse in parse_da_table()
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull kvm fixes from Gleb Natapov: "Most of the fixes are in the emulator since now we emulate more than we did before for correctness sake we see more bugs there, but there is also an OOPS fixed and corruption of xcr0 register." * tag 'kvm-3.10-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: emulator: emulate SALC KVM: emulator: emulate XLAT KVM: emulator: emulate AAM KVM: VMX: fix halt emulation while emulating invalid guest sate KVM: Fix kvm_irqfd_init initialization KVM: x86: fix maintenance of guest/host xcr0 state
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm由 Linus Torvalds 提交于
Pull device-mapper updates from Alasdair Kergon: "Allow devices that hold metadata for the device-mapper thin provisioning target to be extended easily; allow WRITE SAME on multipath devices; an assortment of little fixes and clean-ups." * tag 'dm-3.10-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: (21 commits) dm cache: set config value dm cache: move config fns dm thin: generate event when metadata threshold passed dm persistent metadata: add space map threshold callback dm persistent data: add threshold callback to space map dm thin: detect metadata device resizing dm persistent data: support space map resizing dm thin: open dev read only when possible dm thin: refactor data dev resize dm cache: replace memcpy with struct assignment dm cache: fix typos in comments dm cache policy: fix description of lookup fn dm: document iterate_devices dm persistent data: fix error message typos dm cache: tune migration throttling dm mpath: enable WRITE SAME support dm table: fix write same support dm bufio: avoid a possible __vmalloc deadlock dm snapshot: fix error return code in snapshot_ctr dm cache: fix error return code in cache_create ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
Pull HID fixes from Jiri Kosina: - fix usage of sleeping lock in atomic context from Jiri Kosina - build fix for hid-steelseries under certain .config setups by Simon Wood - simple mismerge fix from Fernando Luis Vázquez Cao * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: debug: fix RCU preemption issue HID: hid-steelseries fix led class build issue HID: reintroduce fix-up for certain Sony RF receivers
-
- 10 5月, 2013 35 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "This contains small fixes since the previous pull request: - A few regression fixes and small updates of HD-audio - Yet another fix for Haswell HDMI audio - A copule of trivial fixes in ASoC McASP, DPAM and WM8994" * tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: Revert "ALSA: hda - Don't set up active streams twice" ALSA: Add comment for control TLV API ALSA: hda - Apply pin-enablement workaround to all Haswell HDMI codecs ALSA: HDA: Fix Oops caused by dereference NULL pointer ALSA: mips/sgio2audio: Remove redundant platform_set_drvdata() ALSA: mips/hal2: Remove redundant platform_set_drvdata() ALSA: hda - Fix 3.9 regression of EAPD init on Conexant codecs sound: Fix make allmodconfig on MIPS ALSA: hda - Fix system panic when DMA > 40 bits for Nvidia audio controllers ALSA: atmel: Remove redundant platform_set_drvdata() ASoC: McASP: Fix receive clock polarity in DAIFMT_NB_NF mode. ASoC: wm8994: missing break in wm8994_aif3_hw_params() ASoC: McASP: Add pins output direction for rx clocks when configured in CBS_CFS format ASoC: dapm: use clk_prepare_enable and clk_disable_unprepare
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS updates from Ralf Baechle: - More work on DT support for various platforms - Various fixes that were to late to make it straight into 3.9 - Improved platform support, in particular the Netlogic XLR and BCM63xx, and the SEAD3 and Malta eval boards. - Support for several Ralink SOC families. - Complete support for the microMIPS ASE which basically reencodes the existing MIPS32/MIPS64 ISA to use non-constant size instructions. - Some fallout from LTO work which remove old cruft and will generally make the MIPS kernel easier to maintain and resistant to compiler optimization, even in absence of LTO. - KVM support. While MIPS has announced hardware virtualization extensions this KVM extension uses trap and emulate mode for virtualization of MIPS32. More KVM work to add support for VZ hardware virtualizaiton extensions and MIPS64 will probably already be merged for 3.11. Most of this has been sitting in -next for a long time. All defconfigs have been build or run time tested except three for which fixes are being sent by other maintainers. Semantic conflict with kvm updates done as per Ralf * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (118 commits) MIPS: Add new GIC clockevent driver. MIPS: Formatting clean-ups for clocksources. MIPS: Refactor GIC clocksource code. MIPS: Move 'gic_frequency' to common location. MIPS: Move 'gic_present' to common location. MIPS: MIPS16e: Add unaligned access support. MIPS: MIPS16e: Support handling of delay slots. MIPS: MIPS16e: Add instruction formats. MIPS: microMIPS: Optimise 'strnlen' core library function. MIPS: microMIPS: Optimise 'strlen' core library function. MIPS: microMIPS: Optimise 'strncpy' core library function. MIPS: microMIPS: Optimise 'memset' core library function. MIPS: microMIPS: Add configuration option for microMIPS kernel. MIPS: microMIPS: Disable LL/SC and fix linker bug. MIPS: microMIPS: Add vdso support. MIPS: microMIPS: Add unaligned access support. MIPS: microMIPS: Support handling of delay slots. MIPS: microMIPS: Add support for exception handling. MIPS: microMIPS: Floating point support. MIPS: microMIPS: Fix macro naming in micro-assembler. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc由 Linus Torvalds 提交于
Pull second set of arc arch updates from Vineet Gupta: "Aliasing VIPT dcache support for ARC I'm satisified with testing, specially with fuse which has historically given grief to VIPT arches (ARM/PARISC...)" * tag 'arc-v3.10-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [TB10x] Remove GENERIC_GPIO ARC: [mm] Aliasing VIPT dcache support 4/4 ARC: [mm] Aliasing VIPT dcache support 3/4 ARC: [mm] Aliasing VIPT dcache support 2/4 ARC: [mm] Aliasing VIPT dcache support 1/4 ARC: [mm] refactor the core (i|d)cache line ops loops ARC: [mm] serious bug in vaddr based icache flush
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu由 Linus Torvalds 提交于
Pull m68knommu updates from Greg Ungerer: "The bulk of the changes are generalizing the ColdFire v3 core support and adding in 537x CPU support. Also a couple of other bug fixes, one to fix a reintroduction of a past bug in the romfs filesystem nommu support." * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: enable Timer on coldfire 532x m68knommu: fix ColdFire 5373/5329 QSPI base address m68knommu: add support for configuring a Freescale M5373EVB board m68knommu: add support for the ColdFire 537x family of CPUs m68knommu: make ColdFire M532x platform support more v3 generic m68knommu: create and use a common M53xx ColdFire class of CPUs m68k: remove unused asm/dbg.h m68k: Set ColdFire ACR1 cache mode depending on kernel configuration romfs: fix nommu map length to keep inside filesystem m68k: clean up unused "config ROMVECSIZE"
-
git://github.com/realmz/blackfin-linux由 Linus Torvalds 提交于
Pull blackfin updates from Steven Miao. * tag 'for-linus' of git://github.com/realmz/blackfin-linux: bfin cache: dcplb map: add 16M dcplb map for BF60x blackfin: smp: fix smp build after drop asm/system.h blackfin: fix bootup core clock and system clock display Platform Nand: Set the GPIO for NAND read as input blackfin: rename vmImage to uImage after we move to buildroot blackfin: twi: Remove bogus #endif bf609: rsi: Add bf609 rsi MMR macro and board platform data. blackfin: dmc: Improve DDR2 write through in DMC effict controller.
-
git://git.monstr.eu/linux-2.6-microblaze由 Linus Torvalds 提交于
Pull microblaze updates from Michal Simek. * 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Enable IRQ in arch_cpu_idle microblaze: Fix uaccess_ok macro microblaze: Add support for new cpu versions and target architecture microblaze: Do not select OPT_LIB_ASM by default microblaze: Fix initrd support microblaze: Do not use r6 in head.S microblaze: pci: Remove duplicated header microblaze: Set the default irq_domain microblaze: pci: Remove duplicated include from pci-common.c
-
由 Joe Thornber 提交于
Share configuration option processing code between the dm cache ctr and message functions. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Alasdair G Kergon 提交于
Move process_config_option() in dm-cache-target.c to make the next patch more readable. Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Joe Thornber 提交于
Generate a dm event when the amount of remaining thin pool metadata space falls below a certain level. The threshold is taken to be a quarter of the size of the metadata device with a minimum threshold of 4MB. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Joe Thornber 提交于
Add a threshold callback to dm persistent data space maps. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Joe Thornber 提交于
Add a threshold callback function to the persistent data space map interface for a subsequent patch to use. dm-thin and dm-cache are interested in knowing when they're getting low on metadata or data blocks. This patch introduces a new method for registering a callback against a threshold. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Joe Thornber 提交于
Allow the dm thin pool metadata device to be extended. Whenever a pool is resumed, detect whether the size of the metadata device has increased, and if so, extend the metadata to use the new space. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Joe Thornber 提交于
Support extending a dm persistent data metadata space map. The extend itself is implemented by switching back to the boostrap allocator and pointing to the new space. The extra bitmap indexes are then allocated from the new space, and finally we switch back to the proper space map ops and tweak the reference counts. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Joe Thornber 提交于
If a thin pool is created in read-only-metadata mode then only open the metadata device read-only. Previously it was always opened with FMODE_READ | FMODE_WRITE. (Note that dm_get_device() still allows read-only dm devices to be used read-write at the moment: If I create a read-only linear device for the metadata, via dmsetup load --readonly, then I can still create a rw pool out of it.) Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Joe Thornber 提交于
Refactor device size functions in preparation for similar metadata device resizing functions. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Joe Thornber 提交于
Use struct assignment rather than memcpy in dm cache. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Joe Thornber 提交于
Fix up some typos in dm-cache comments. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Alasdair G Kergon 提交于
Correct the documented requirement on the return code from dm cache policy lookup functions stated in the policy module header file. Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Alasdair G Kergon 提交于
Document iterate_devices in device-mapper.h. Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Joe Thornber 提交于
Fix some typos in dm-space-map-metadata.c error messages. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Joe Thornber 提交于
Tune the dm cache migration throttling. i) Issue a tick every second, just in case there's no i/o going through. ii) Drop the migration threshold right down to something suitable for background work. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mike Snitzer 提交于
Enable WRITE SAME support in dm multipath. As far as multipath is concerned it is just another write request. Signed-off-by: NMike Snitzer <snitzer@redhat.com> Tested-by: NBharata B Rao <bharata.rao@gmail.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mike Snitzer 提交于
If device_not_write_same_capable() returns true then the iterate_devices loop in dm_table_supports_write_same() should return false. Reported-by: NBharata B Rao <bharata.rao@gmail.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # v3.8+ Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
This patch uses memalloc_noio_save to avoid a possible deadlock in dm-bufio. (it could happen only with large block size, at most PAGE_SIZE << MAX_ORDER (typically 8MiB). __vmalloc doesn't fully respect gfp flags. The specified gfp flags are used for allocation of requested pages, structures vmap_area, vmap_block and vm_struct and the radix tree nodes. However, the kernel pagetables are allocated always with GFP_KERNEL. Thus the allocation of pagetables can recurse back to the I/O layer and cause a deadlock. This patch uses the function memalloc_noio_save to set per-process PF_MEMALLOC_NOIO flag and the function memalloc_noio_restore to restore it. When this flag is set, all allocations in the process are done with implied GFP_NOIO flag, thus the deadlock can't happen. This should be backported to stable kernels, but they don't have the PF_MEMALLOC_NOIO flag and memalloc_noio_save/memalloc_noio_restore functions. So, PF_MEMALLOC should be set and restored instead. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Wei Yongjun 提交于
Return -ENOMEM instead of success if unable to allocate pending exception mempool in snapshot_ctr. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: stable@vger.kernel.org Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Wei Yongjun 提交于
Return -ENOMEM if memory allocation fails in cache_create instead of 0 (to avoid NULL pointer dereference). Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: stable@vger.kernel.org Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mike Snitzer 提交于
Fix a regression in the calculation of the stripe_width in the dm stripe target which led to incorrect processing of device limits. The stripe_width is the stripe device length divided by the number of stripes. The group of commits in the range f14fa693 ("dm stripe: fix size test") to eb850de6 ("dm stripe: support for non power of 2 chunksize") interfered with each other (a merging error) and led to the stripe_width being set incorrectly to the stripe device length divided by chunk_size * stripe_count. For example, a stripe device's table with: 0 33553920 striped 3 512 ... should result in a stripe_width of 11184640 (33553920 / 3), but due to the bug it was getting set to 21845 (33553920 / (512 * 3)). The impact of this bug is that device topologies that previously worked fine with the stripe target are no longer considered valid. In particular, there is a higher risk of seeing this issue if one of the stripe devices has a 4K logical block size. Resulting in an error message like this: "device-mapper: table: 253:4: len=21845 not aligned to h/w logical block size 4096 of dm-1" The fix is to swap the order of the divisions and to use a temporary variable for the second one, so that width retains the intended value. Signed-off-by: NMike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 3.6+ Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Takashi Iwai 提交于
This reverts commit affdb62b. The commit introduced a regression with AD codecs where the stream is always clean up. Since the patch is just a minor optimization and reverting the commit fixes the issue, let's just revert it. Reported-and-tested-by: NMichael Burian <michael.burian@sbg.at> Cc: <stable@vger.kernel.org> [v3.9+] Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Vineet Gupta 提交于
This tracks Alexandre Courbot's mainline GPIO rework Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Acked-by: NAlexandre Courbot <acourbot@nvidia.com>
-
由 Tyler Hicks 提交于
Make the switch from the blkcipher kernel crypto interface to the ablkcipher interface. encrypt_scatterlist() and decrypt_scatterlist() now use the ablkcipher interface but, from the eCryptfs standpoint, still treat the crypto operation as a synchronous operation. They submit the async request and then wait until the operation is finished before they return. Most of the changes are contained inside those two functions. Despite waiting for the completion of the crypto operation, the ablkcipher interface provides performance increases in most cases when used on AES-NI capable hardware. Signed-off-by: NTyler Hicks <tyhicks@canonical.com> Acked-by: NColin King <colin.king@canonical.com> Reviewed-by: NZeev Zilberman <zeev@annapurnaLabs.com> Cc: Dustin Kirkland <dustin.kirkland@gazzang.com> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Ying Huang <ying.huang@intel.com> Cc: Thieu Le <thieule@google.com> Cc: Li Wang <dragonylffly@163.com> Cc: Jarkko Sakkinen <jarkko.sakkinen@iki.fi>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux由 Linus Torvalds 提交于
Pull trivial pstore update from Tony Luck: "Couple of pstore cleanups" It turns out that the kmemdup() conversion ends up being undone by the fact that the memory block also needed the ecc information (see commit bd08ec33: "pstore/ram: Restore ecc information block"), so all that remains after merging is the error return code change. * tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: pstore/ram: fix error return code in ramoops_probe() fs: pstore: Replaced calls to kmalloc and memcpy with kmemdup
-
git://git.infradead.org/users/willy/linux-nvme由 Linus Torvalds 提交于
Pull NVMe driver update from Matthew Wilcox: "Lots of exciting new features in the NVM Express driver this time, including support for emulating SCSI commands, discard support and the ability to submit per-sector metadata with I/Os. It's still mostly bugfixes though!" * git://git.infradead.org/users/willy/linux-nvme: (27 commits) NVMe: Use user defined admin ioctl timeout NVMe: Simplify Firmware Activate code slightly NVMe: Only clear the enable bit when disabling controller NVMe: Wait for device to acknowledge shutdown NVMe: Schedule timeout for sync commands NVMe: Meta-data support in NVME_IOCTL_SUBMIT_IO NVMe: Device specific stripe size handling NVMe: Split non-mergeable bio requests NVMe: Remove dead code in nvme_dev_add NVMe: Check for NULL memory in nvme_dev_add NVMe: Fix error clean-up on nvme_alloc_queue NVMe: Free admin queue on request_irq error NVMe: Add scsi unmap to SG_IO NVMe: queue usage fixes in nvme-scsi NVMe: Set TASK_INTERRUPTIBLE before processing queues NVMe: Add a character device for each nvme device NVMe: Fix endian-related problems in user I/O submission path NVMe: Fix I/O cancellation status on big-endian machines NVMe: Fix sparse warnings in scsi emulation NVMe: Don't fail initialisation unnecessarily ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPICA fixes from Rafael Wysocki: - _INI regression fix from Tomasz Nowicki. - Fix for a possible memory leak in _OSI support routine from Jung-uk Kim. - Fix for a possible buffer overflow during field unit read operation from Bob Moore. * tag 'acpi-fixes-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: ACPICA: Fix for _INI regression ACPICA: _OSI support: Fix possible memory leak ACPICA: Fix possible buffer overflow during a field unit read operation
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes and straggler patches from Olof Johansson: "A collection of fixes for fall out from 3.10 merge window, some build fixes and warning cleanups and a small handful of patches that were small and contained and made sense to still include in 3.10 (some of these have also been in -next since the merge window opened). Largest continous series is for OMAP, but there's a handful for other platforms. For i.MX, one of the patches are framebuffer fixups due to fallout during the merge window, and the other removes some stale and broken code." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits) ARM: exynos: dts: Fixed vbus-gpios ARM: EXYNOS5: Fix kernel dump in AFTR idle mode ARM: ux500: Rid ignored return value of regulator_enable() compiler warning ARM: ux500: read the correct soc_id number ARM: exynos: dts: cros5250: add cyapa trackpad video: mxsfb: Adapt to new videomode API ARM: imx: Select GENERIC_ALLOCATOR ARM: imx: compile fix for hotplug.c ARM: dts: don't assume boards are using twl4030 for omap3 ARM: OMAP2+: Remove bogus IS_ERR_OR_NULL checking from id.c ARM: dts: Configure and fix the McSPI pins for 4430sdp ARM: dts: AM33XX: Add GPMC node ARM: dts: OMAP4460: Fix CPU OPP voltages ARM: dts: OMAP36xx: Fix CPU OPP voltages ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si omap: mux: add AM/DM37x gpios ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init() ARM: OMAP2+: omap_device: use late_initcall_sync ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices ...
-
git://github.com/czankel/xtensa-linux由 Linus Torvalds 提交于
Pull xtensa updates from Chris Zankel: "Support for the latest MMU architecture that allows for a larger accessible memory region, and various bug-fixes" * tag 'xtensa-next-20130508' of git://github.com/czankel/xtensa-linux: xtensa: Switch to asm-generic/linkage.h xtensa: fix redboot load address xtensa: ISS: fix timer_lock usage in rs_open xtensa: disable IRQs while IRQ handler is running xtensa: enable lockdep support xtensa: fix arch_irqs_disabled_flags implementation xtensa: add irq flags trace support xtensa: provide custom CALLER_ADDR* implementations xtensa: add stacktrace support xtensa: clean up stpill_registers xtensa: don't use a7 in simcalls xtensa: don't attempt to use unconfigured timers xtensa: provide default platform_pcibios_init implementation xtensa: remove KCORE_ELF again xtensa: document MMUv3 setup sequence xtensa: add MMU v3 support xtensa: fix ibreakenable register update xtensa: fix oprofile building as module
-