Signed-off-by: NDaniel Walker <dwalker@mvista.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

drivers/char/mxser.c:386: warning: 'mxser_get_PCI_conf' declared 'static' but never defined

when building without CONFIG_PCI.

[jesper.juhl@gmail.com: Fix warning: 'CheckIsMoxaMust' defined but not used]
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is years dead code and it keeps turning up in confusing ways when
grepping for stuff.
Signed-off-by: NAlan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mxser_new, remove useless comments in mxser_cards

It was rest from times, where info about the card was separated (name,
ports number and flags).
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mxser_new, move to PCI_VDEVICE
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mxser_new, upgrade to 1.10

This adds support for new (5 cards) hardware.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The non-filesystem capability meaning of CAP_SETPCAP is that a process, p1,
can change the capabilities of another process, p2.  This is not the
meaning that was intended for this capability at all, and this
implementation came about purely because, without filesystem capabilities,
there was no way to use capabilities without one process bestowing them on
another.

Since we now have a filesystem support for capabilities we can fix the
implementation of CAP_SETPCAP.

The most significant thing about this change is that, with it in effect, no
process can set the capabilities of another process.

The capabilities of a program are set via the capability convolution
rules:

   pI(post-exec) = pI(pre-exec)
   pP(post-exec) = (X(aka cap_bset) & fP) | (pI(post-exec) & fI)
   pE(post-exec) = fE ? pP(post-exec) : 0

at exec() time.  As such, the only influence the pre-exec() program can
have on the post-exec() program's capabilities are through the pI
capability set.

The correct implementation for CAP_SETPCAP (and that enabled by this patch)
is that it can be used to add extra pI capabilities to the current process
- to be picked up by subsequent exec()s when the above convolution rules
are applied.

Here is how it works:

Let's say we have a process, p. It has capability sets, pE, pP and pI.
Generally, p, can change the value of its own pI to pI' where

   (pI' & ~pI) & ~pP = 0.

That is, the only new things in pI' that were not present in pI need to
be present in pP.

The role of CAP_SETPCAP is basically to permit changes to pI beyond
the above:

   if (pE & CAP_SETPCAP) {
      pI' = anything; /* ie., even (pI' & ~pI) & ~pP != 0  */
   }

This capability is useful for things like login, which (say, via
pam_cap) might want to raise certain inheritable capabilities for use
by the children of the logged-in user's shell, but those capabilities
are not useful to or needed by the login program itself.

One such use might be to limit who can run ping. You set the
capabilities of the 'ping' program to be "= cap_net_raw+i", and then
only shells that have (pI & CAP_NET_RAW) will be able to run
it. Without CAP_SETPCAP implemented as described above, login(pam_cap)
would have to also have (pP & CAP_NET_RAW) in order to raise this
capability and pass it on through the inheritable set.
Signed-off-by: NAndrew Morgan <morgan@kernel.org>
Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After adding checking to register_sysctl_table and finding a whole new set
of bugs.  Missed by countless code reviews and testers I have finally lost
patience with the binary sysctl interface.

The binary sysctl interface has been sort of deprecated for years and
finding a user space program that uses the syscall is more difficult then
finding a needle in a haystack.  Problems continue to crop up, with the in
kernel implementation.  So since supporting something that no one uses is
silly, deprecate sys_sysctl with a sufficient grace period and notice that
the handful of user space applications that care can be fixed or replaced.

The /proc/sys sysctl interface that people use will continue to be
supported indefinitely.

This patch moves the tested warning about sysctls from the path where
sys_sysctl to a separate path called from both implementations of
sys_sysctl, and it adds a proper entry into
Documentation/feature-removal-schedule.

Allowing us to revisit this in a couple years time and actually kill
sys_sysctl.

[lethal@linux-sh.org: sysctl: Fix syscall disabled build]
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It turns out that the net/irda code didn't register any of it's binary paths
in the global sysctl.h header file so I missed them completely when making an
authoritative list of binary sysctl paths in the kernel.  So add them to the
list of valid binary sysctl paths.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Acked-by: NSamuel Ortiz <samuel@sortiz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Well it turns out after I dug into the problems a little more I was returning
a few false positives so this patch updates my logic to remove them.

- Don't complain about 0 ctl_names in sysctl_check_binary_path
  It is valid for someone to remove the sysctl binary interface
  and still keep the same sysctl proc interface.

- Count ctl_names and procnames as matching if they both don't
  exist.

- Only warn about missing min&max when the generic functions care.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After going through the kernels sysctl tables several times it has become
clear that code review and testing is just not effective in prevent
problematic sysctl tables from being used in the stable kernel.  I certainly
can't seem to fix the problems as fast as they are introduced.

Therefore this patch adds sysctl_check_table which is called when a sysctl
table is registered and checks to see if we have a problematic sysctl table.

The biggest part of the code is the table of valid binary sysctl entries, but
since we have frozen our set of binary sysctls this table should not need to
change, and it makes it much easier to detect when someone unintentionally
adds a new binary sysctl value.

As best as I can determine all of the several hundred errors spewed on boot up
now are legitimate.

[bunk@kernel.org: kernel/sysctl_check.c must #include <linux/string.h>]
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Grumble.  These numbers should have been in sysctl.h from the beginning if we
ever expected anyone to use them.  Oh well put them there now so we can find
them and make maintenance easier.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Acked-by: NSamuel Ortiz <samuel@sortiz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It looks like we inadvertently killed the cad_pid binary sysctl support when
cap_pid was changed to be a struct pid.  Since no one has complained just
remove the binary path.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

No one has bothered to set strategy routine for the the netfilter sysctls that
return jiffies to be sysctl_jiffies.

So it appears the sys_sysctl path is unused and untested, so this patch
removes the binary sysctl numbers.

Which fixes the netfilter oops in 2.6.23-rc2-mm2 for me.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Instead of having a bunch of ifdefs in sysctl.c move all of the pty sysctl
logic into drivers/char/pty.c

As well as cleaning up the logic this prevents sysctl_check_table from
complaining that the root table has a NULL data pointer on something with
generic methods.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The sysctl binary paths don't look as if they even code work, .data is not
filled in, and all of the proc_handlers look at extra1 and there is not
strategy routine.

So just kill the binary paths.

In addition this patch removes the setting of extra1 on directories.  It
doesn't look like the parport code ever examines it, and it's bad sysctl form.

[bunk@kernel.org: remove parport_device_num()]
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

aio-nr, aio-max-nr, acpi_video_flags are unsigned long values which sysctl
does not handle properly with a 64bit kernel and a 32bit user space.

Since no one is likely to be using the binary sysctl values and the ascii
interface still works, this patch just removes support for the binary sysctl
interface from the kernel.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently tcp_available_congestion_control does not even attempt being read
from sys_sysctl, and ipfrag_max_dist while it works allows setting of invalid
values using sys_sysctl.

So just kill the binary sys_sysctl support for these sysctls.  If the support
is not important enough to test and get right it probably isn't important
enough to keep.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The binary interface for the cdrom sysctls can't possilby work.  So remove the
binary sysctls and update the test for finding out which sysctl table entry we
are dealy with to use the procname and not the ctl_name (which I am removing).
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is debug code so no need to support binary sysctl, and the binary sysctls
as they were written were not consistent with what showed up in /proc so
remove the binary sysctl support.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@suse.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We don't preoperly support the sysctl binary path for flushing the ipv6
routes.  So remove support for a binary path.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- In ipv6 ndisc_ifinfo_syctl_change so it doesn't depend on binary
  sysctl names for a function that works with proc.

- In neighbour.c reorder the table to put the possibly unused entries
  at the end so we can remove them by terminating the table early.

- In neighbour.c kill the entries with questionable binary sysctl
  handling behavior.

- In neighbour.c if we don't have a strategy routine remove the
  binary path.  So we don't the default sysctl strategy routine
  on data that is not ready for it.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These functions are all wrapper functions for the proc interface that are
needed for them to work correctly.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Acked-by: NAndrew Morgan <morgan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Because of a conflict with FS_INODE_NR none of the binary sysctl numbers use
by mqueue, were available to user space.  So just remove them.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There as been no easy way to wrap the default sysctl strategy routine except
for returning 0.  Which is not always what we want.  The few instances I have
seen that want different behaviour have written their own version of
sysctl_data.  While not too hard it is unnecessary code and has the potential
for extra bugs.

So to make these situations easier and make that part of sysctl more symetric
I have factord sysctl_data out of do_sysctl_strategy and exported as a
function everyone can use.

Further having sysctl_data be an explicit function makes checking for badly
formed sysctl tables much easier.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In sysctl.h the typedef struct ctl_table ctl_table violates coding style isn't
needed and is a bit of a nuisance because it makes it harder to recognize
ctl_table is a type name.

So this patch removes it from the generic sysctl code.  Hopefully I will have
enough energy to send the rest of my patches will follow and to remove it from
the rest of the kernel.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the ATTR_KILL_S*ID bits are set then any mode change is only for clearing
the setuid/setgid bits.  For CIFS, skip the mode change and let the server
handle it.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Cc: Steven French <sfrench@us.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the ATTR_KILL_S*ID bits are set then any mode change is only for clearing
the setuid/setgid bits.  For NFS, skip the mode change and let the server
handle it.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When an unprivileged process attempts to modify a file that has the setuid or
setgid bits set, the VFS will attempt to clear these bits.  The VFS will set
the ATTR_KILL_SUID or ATTR_KILL_SGID bits in the ia_valid mask, and then call
notify_change to clear these bits and set the mode accordingly.

With a networked filesystem (NFS and CIFS in particular but likely others),
the client machine or process may not have credentials that allow for setting
the mode.  In some situations, this can lead to file corruption, an operation
failing outright because the setattr fails, or to races that lead to a mode
change being reverted.

In this situation, we'd like to just leave the handling of this to the server
and ignore these bits.  The problem is that by the time the setattr op is
called, the VFS has already reinterpreted the ATTR_KILL_* bits into a mode
change.  The setattr operation has no way to know its intent.

The following patch fixes this by making notify_change no longer clear the
ATTR_KILL_SUID and ATTR_KILL_SGID bits in the ia_valid before handing it off
to the setattr inode op.  setattr can then check for the presence of these
bits, and if they're set it can assume that the mode change was only for the
purposes of clearing these bits.

This means that we now have an implicit assumption that notify_change is never
called with ATTR_MODE and either ATTR_KILL_S*ID bit set.  Nothing currently
enforces that, so this patch also adds a BUG() if that occurs.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Neil Brown <neilb@suse.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: "Vladimir V. Saveliev" <vs@namesys.com>
Cc: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

reiserfs_setattr can call notify_change recursively using the same
iattr struct. This could cause it to trip the BUG() in notify_change.
Fix reiserfs to clear those bits near the beginning of the function.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: "Vladimir V. Saveliev" <vs@namesys.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's theoretically possible for a single SETATTR call to come in that sets the
mode and the uid/gid.  In that case, don't set the ATTR_KILL_S*ID bits since
that would trip the BUG() in notify_change.  Just fix up the mode to have the
same effect.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Cc: Neil Brown <neilb@suse.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make sure ecryptfs doesn't trip the BUG() in notify_change.  This also allows
the lower filesystem to interpret ATTR_KILL_S*ID in its own way.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Neil Brown <neilb@suse.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: "Vladimir V. Saveliev" <vs@namesys.com>
Cc: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- Fix resource leakage in error case within detect_cache_attributes()

- Don't register hotcpu notifier when cache_add_dev() returns error

- Introduce cache_dev_map cpumask to track whether cache interface for
  CPU is successfully added by cache_add_dev() or not.

  cache_add_dev() may fail with out of memory error. In order to
  avoid cache_remove_dev() with that uninitialized cache interface when
  CPU_DEAD event is delivered we need to have the cache_dev_map cpumask.

  (We cannot change cache_add_dev() from CPU_ONLINE event handler
  to CPU_UP_PREPARE event handler. Because cache_add_dev() needs
  to do cpuid and store the results with its CPU online.)

[nix.or.die@googlemail.com: fix a section mismatch warning]
Cc: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Andi Kleen <ak@suse.de>
Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: NGabriel Craciunescu <nix.or.die@googlemail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- Clear kobject in percpu device_mce before calling sysdev_register() with

  Because mce_create_device() may fail and it leaves kobject filled with
  junk. It will be the problem when mce_create_device() will be called
  next time.

- Fix error handling in mce_create_device()

  Error handling should not do sysdev_remove_file() with not yet added
  attributes.

- Don't register hotcpu notifier when mce_create_device() returns error

- Do mce_create_device() in CPU_UP_PREPARE instead of CPU_ONLINE

Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Andi Kleen <ak@suse.de>
Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Do msr_device_create() in CPU_UP_PREPARE instead of CPU_ONLINE.

Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Andi Kleen <ak@suse.de>
Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Do thermal_throttle_add_dev() in CPU_UP_PREPARE instead of CPU_ONLINE.

Cc: Dmitriy Zavin <dmitriyz@google.com>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Andi Kleen <ak@suse.de>
Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

By previous cpu hotplug notifier change, we don't need to track topology_dev
existence for each cpu by topology_dev_map.
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The functions in a CPU notifier chain is called with CPU_UP_PREPARE event
before making the CPU online.  If one of the callback returns NOTIFY_BAD, it
stops to deliver CPU_UP_PREPARE event, and CPU online operation is canceled.
Then CPU_UP_CANCELED event is delivered to the functions in a CPU notifier
chain again.

This CPU_UP_CANCELED event is delivered to the functions which have been
called with CPU_UP_PREPARE, not delivered to the functions which haven't been
called with CPU_UP_PREPARE.

The problem that makes existing cpu hotplug error handlings complex is that
the CPU_UP_CANCELED event is delivered to the function that has returned
NOTIFY_BAD, too.

Usually we don't expect to call destructor function against the object that
has failed to initialize.  It is like:

	err = register_something();
	if (err) {
		unregister_something();
		return err;
	}

So it is natural to deliver CPU_UP_CANCELED event only to the functions that
have returned NOTIFY_OK with CPU_UP_PREPARE event and not to call the function
that have returned NOTIFY_BAD.  This is what this patch is doing.

Otherwise, every cpu hotplug notifiler has to track whether notifiler event is
failed or not for each cpu.  (drivers/base/topology.c is doing this with
topology_dev_map)

Similary this patch makes same thing with CPU_DOWN_PREPARE and CPU_DOWN_FAILED
evnets.
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes memory leak in error path.

In reality, we don't need to call cpuup_canceled(cpu) for now.  But upcoming
cpu hotplug error handling change needs this.

Cc: Christoph Lameter <clameter@sgi.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>