- 24 9月, 2019 32 次提交
-
-
由 Vitaly Kuznetsov 提交于
Hyper-V provides direct tlb flush function which helps L1 Hypervisor to handle Hyper-V tlb flush request from L2 guest. Add the function support for VMX. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: NTianyu Lan <Tianyu.Lan@microsoft.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Tianyu Lan 提交于
Hyper-V direct tlb flush function should be enabled for guest that only uses Hyper-V hypercall. User space hypervisor(e.g, Qemu) can disable KVM identification in CPUID and just exposes Hyper-V identification to make sure the precondition. Add new KVM capability KVM_CAP_ HYPERV_DIRECT_TLBFLUSH for user space to enable Hyper-V direct tlb function and this function is default to be disabled in KVM. Signed-off-by: NTianyu Lan <Tianyu.Lan@microsoft.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Tianyu Lan 提交于
The struct hv_vp_assist_page was defined incorrectly. The "vtl_control" should be u64[3], "nested_enlightenments _control" should be a u64 and there are 7 reserved bytes following "enlighten_vmentry". Fix the definition. Signed-off-by: NTianyu Lan <Tianyu.Lan@microsoft.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Jim Mattson 提交于
These MSRs should be enumerated by KVM_GET_MSR_INDEX_LIST, so that userspace knows that these MSRs may be part of the vCPU state. Signed-off-by: NJim Mattson <jmattson@google.com> Reviewed-by: NEric Hankland <ehankland@google.com> Reviewed-by: NPeter Shier <pshier@google.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd由 Linus Torvalds 提交于
Pull MFD updates from Lee Jones: "New Drivers: - Add support for Merrifield Basin Cove PMIC New Device Support: - Add support for Intel Tiger Lake to Intel LPSS PCI - Add support for Intel Sky Lake to Intel LPSS PCI - Add support for ST-Ericsson DB8520 to DB8500 PRCMU New Functionality: - Add RTC and PWRC support to MT6323 Fix-ups: - Clean-up include files; davinci_voicecodec, asic3, sm501, mt6397 - Ignore return values from debugfs_create*(); ab3100-*, ab8500-debugfs, aat2870-core - Device Tree changes; rn5t618, mt6397 - Use new I2C API; tps80031, 88pm860x-core, ab3100-core, bcm590xx, da9150-core, max14577, max77693, max77843, max8907, max8925-i2c, max8997, max8998, palmas, twl-core, - Remove obsolete code; da9063, jz4740-adc - Simplify semantics; timberdale, htc-i2cpld - Add 'fall-through' tags; omap-usb-host, db8500-prcmu - Remove superfluous prints; ab8500-debugfs, db8500-prcmu, fsl-imx25-tsadc, intel_soc_pmic_bxtwc, qcom_rpm, sm501 - Trivial rename/whitespace/typo fixes; mt6397-core, MAINTAINERS - Reorganise code structure; mt6397-* - Improve code consistency; intel-lpss - Use MODULE_SOFTDEP() helper; intel-lpss - Use DEFINE_RES_*() helpers; mt6397-core Bug Fixes: - Clean-up resources; max77620 - Prevent input events being dropped on resume; intel-lpss-pci - Prevent sleeping in IRQ context; ezx-pcap" * tag 'mfd-next-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (48 commits) mfd: mt6323: Add MT6323 RTC and PWRC mfd: mt6323: Replace boilerplate resource code with DEFINE_RES_* macros mfd: mt6397: Add mutex include dt-bindings: mfd: mediatek: Add MT6323 Power Controller dt-bindings: mfd: mediatek: Update RTC to include MT6323 dt-bindings: mfd: mediatek: mt6397: Change to relative paths mfd: db8500-prcmu: Support the higher DB8520 ARMSS mfd: intel-lpss: Use MODULE_SOFTDEP() instead of implicit request mfd: htc-i2cpld: Drop check because i2c_unregister_device() is NULL safe mfd: sm501: Include the GPIO driver header mfd: intel-lpss: Add Intel Skylake ACPI IDs mfd: intel-lpss: Consistently use GENMASK() mfd: Add support for Merrifield Basin Cove PMIC mfd: ezx-pcap: Replace mutex_lock with spin_lock mfd: asic3: Include the right header MAINTAINERS: altera-sysmgr: Fix typo in a filepath mfd: mt6397: Extract IRQ related code from core driver mfd: mt6397: Rename macros to something more readable mfd: Remove dev_err() usage after platform_get_irq() mfd: db8500-prcmu: Mark expected switch fall-throughs ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight由 Linus Torvalds 提交于
Pull backlight updates from Lee Jones: "Core Frameworks - Obtain scale type through sysfs New Functionality: - Provide Device Tree functionality in rave-sp-backlight - Calculate if scale type is (non-)linear in pwm_bl Fix-ups: - Simplify code in lm3630a_bl - Trivial rename/whitespace/typo fixes in lms283gf05 - Remove superfluous NULL check in tosa_lcd - Fix power state initialisation in gpio_backlight - List supported file in MAINTAINERS Bug Fixes: - Kconfig - default to not building unless requested in {LED,BACKLIGHT}_CLASS_DEVICE" * tag 'backlight-next-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: pwm_bl: Set scale type for brightness curves specified in the DT backlight: pwm_bl: Set scale type for CIE 1931 curves backlight: Expose brightness curve type through sysfs MAINTAINERS: Add entry for stable backlight sysfs ABI documentation backlight: gpio-backlight: Correct initial power state handling video: backlight: tosa_lcd: drop check because i2c_unregister_device() is NULL safe video: backlight: Drop default m for {LCD,BACKLIGHT_CLASS_DEVICE} backlight: lms283gf05: Fix a typo in the description passed to 'devm_gpio_request_one()' backlight: lm3630a: Switch to use fwnode_property_count_uXX() backlight: rave-sp: Leave initial state and register with correct device
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI updates from Bjorn Helgaas: "Enumeration: - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it (Krzysztof Wilczynski) - Fix incorrect PCIe device types and remove dev->has_secondary_link to simplify code that deals with upstream/downstream ports (Mika Westerberg) - After suspend, restore Resizable BAR size bits correctly for 1MB BARs (Sumit Saxena) - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra) Virtualization: - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna Labs (Ali Saidi) - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg) - Remove group write permissions from sysfs sriov_numvfs, sriov_drivers_autoprobe (Kelsey Skunberg) Hotplug: - Simplify pciehp indicator control (Denis Efremov) Peer-to-peer DMA: - Allow P2P DMA between root ports for whitelisted bridges (Logan Gunthorpe) - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe) - DMA map P2P DMA requests that traverse host bridge (Logan Gunthorpe) Amazon Annapurna Labs host bridge driver: - Add DT binding and controller driver (Jonathan Chocron) Hyper-V host bridge driver: - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui) - Fix PCI domain number collisions (Haiyang Zhang) - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang) - Fix build errors on non-SYSFS config (Randy Dunlap) i.MX6 host bridge driver: - Limit DBI register length (Stefan Agner) Intel VMD host bridge driver: - Fix config addressing issues (Jon Derrick) Layerscape host bridge driver: - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately (Xiaowei Bao) Mediatek host bridge driver: - Add MT7629 controller support (Jianjun Wang) Mobiveil host bridge driver: - Fix CPU base address setup (Hou Zhiqiang) - Make "num-lanes" property optional (Hou Zhiqiang) Tegra host bridge driver: - Fix OF node reference leak (Nishka Dasgupta) - Disable MSI for root ports to work around design problem (Vidya Sagar) - Add Tegra194 DT binding and controller support (Vidya Sagar) - Add support for sideband pins and slot regulators (Vidya Sagar) - Add PIPE2UPHY support (Vidya Sagar) Misc: - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg) - Unexport pci_bus_get(), etc (Kelsey Skunberg) - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in the PCI core (Kelsey Skunberg) - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg) - Mark expected switch fall-through (Gustavo A. R. Silva) - Propagate errors for optional regulators and PHYs (Thierry Reding) - Fix kernel command line resource_alignment parameter issues (Logan Gunthorpe)" * tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits) PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins PCI: vmd: Fix shadow offsets to reflect spec changes PCI: vmd: Fix config addressing when using bus offsets PCI: dwc: Add validation that PCIe core is set to correct mode PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port PCI: Add ACS quirk for Amazon Annapurna Labs root ports PCI: Add Amazon's Annapurna Labs vendor ID MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support PCI: Get rid of dev->has_secondary_link flag ...
-
git://github.com/cschaufler/smack-next由 Linus Torvalds 提交于
Pull smack updates from Casey Schaufler: "Four patches for v5.4. Nothing is major. All but one are in response to mechanically detected potential issues. The remaining patch cleans up kernel-doc notations" * tag 'smack-for-5.4-rc1' of git://github.com/cschaufler/smack-next: smack: use GFP_NOFS while holding inode_smack::smk_lock security: smack: Fix possible null-pointer dereferences in smack_socket_sock_rcv_skb() smack: fix some kernel-doc notations Smack: Don't ignore other bprm->unsafe flags if LSM_UNSAFE_PTRACE is set
-
由 Bjorn Helgaas 提交于
- Fix typos and whitespace errors (Bjorn Helgaas, Krzysztof Wilczynski) - Remove unnecessary "return" statements (Krzysztof Wilczynski) - Correct of_irq_parse_pci() function documentation (Lubomir Rintel) * pci/trivial: PCI: Remove unnecessary returns PCI: OF: Correct of_irq_parse_pci() documentation PCI: Fix typos and whitespace errors
-
由 Bjorn Helgaas 提交于
- Fix VMD config addressing to ignore starting bus offset (Jon Derrick) - Fix VMD shadow offset scratchpad address (Jon Derrick) * remotes/lorenzo/pci/vmd: PCI: vmd: Fix shadow offsets to reflect spec changes PCI: vmd: Fix config addressing when using bus offsets
-
由 Bjorn Helgaas 提交于
- Fix Tegra OF node reference leak (Nishka Dasgupta) - Add #defines for PCIe Data Link Feature and Physical Layer 16.0 GT/s features (Vidya Sagar) - Disable MSI for Tegra Root Ports since they don't support using MSI for all Root Port events (Vidya Sagar) - Group DesignWare write-protected register writes together (Vidya Sagar) - Move DesignWare capability search interfaces so they can be used by both host and endpoint drivers (Vidya Sagar) - Add DesignWare extended capability search interfaces (Vidya Sagar) - Export dw_pcie_wait_for_link() so drivers can be modules (Vidya Sagar) - Add "snps,enable-cdm-check" DT binding for Configuration Dependent Module (CDM) register checking (Vidya Sagar) - Add DesignWare support for "snps,enable-cdm-check" CDM checking (Vidya Sagar) - Add "supports-clkreq" DT binding for host drivers to decide whether to advertise low power features (Vidya Sagar) - Add DT binding for Tegra194 (Vidya Sagar) - Add DT binding for Tegra194 P2U (PIPE to UPHY) block (Vidya Sagar) - Add support for Tegra194 P2U (PIPE to UPHY) (Vidya Sagar) - Add support for Tegra194 host controller (Vidya Sagar) - Add Tegra support for sideband PERST# and CLKREQ# for C5 (Vidya Sagar) - Add Tegra support for slot regulators for p2972-0000 platform (Vidya Sagar) * lorenzo/pci/tegra: arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support phy: tegra: Add PCIe PIPE2UPHY support dt-bindings: PHY: P2U: Add Tegra194 P2U block dt-bindings: PCI: tegra: Add device tree support for Tegra194 dt-bindings: Add PCIe supports-clkreq property PCI: dwc: Add support to enable CDM register check dt-bindings: PCI: designware: Add binding for CDM register check PCI: dwc: Export dw_pcie_wait_for_link() API PCI: dwc: Add extended configuration space capability search API PCI: dwc: Move config space capability search API PCI: dwc: Group DBI registers writes requiring unlocking PCI: Disable MSI for Tegra root ports PCI: Add #defines for some of PCIe spec r4.0 features PCI: tegra: Fix OF node reference leak
-
由 Bjorn Helgaas 提交于
- Fix mobiveil inbound window CPU base address setup (Hou Zhiqiang) * remotes/lorenzo/pci/mobiveil: PCI: mobiveil: Fix the CPU base address setup in inbound window
-
由 Bjorn Helgaas 提交于
- Propagate regulator_get_optional() errors so callers can distinguish real errors from optional regulators that are absent (Thierry Reding) - Propagate devm_of_phy_get() errors so callers can distinguish real errors from optional PHYs that are absent (Thierry Reding) - Add Andrew Murray as PCI native driver reviewer (Lorenzo Pieralisi) * remotes/lorenzo/pci/misc: MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: iproc: Propagate errors for optional PHYs PCI: histb: Propagate errors for optional regulators PCI: armada8x: Propagate errors for optional PHYs PCI: imx6: Propagate errors for optional regulators PCI: exynos: Propagate errors for optional PHYs PCI: rockchip: Propagate errors for optional regulators
-
由 Bjorn Helgaas 提交于
- Add mediatek support for MT7629 (Jianjun Wang) * remotes/lorenzo/pci/mediatek: PCI: mediatek: Add controller support for MT7629 dt-bindings: PCI: Add support for MT7629
-
由 Bjorn Helgaas 提交于
- Mark Layerscape endpoint BARs 2 and 4 as 64-bit (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP so EP/RC can be built separately (Xiaowei Bao) * remotes/lorenzo/pci/layerscape: PCI: layerscape: Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately PCI: layerscape: Add the bar_fixed_64bit property to the endpoint driver
-
由 Bjorn Helgaas 提交于
- Reduce i.MX 6Quad DBI register length to avoid aborts from accessing invalid registers (Stefan Agner) * remotes/lorenzo/pci/imx: PCI: imx6: Limit DBI register length
-
由 Bjorn Helgaas 提交于
- Fix Hyper-V use-after-free in pci_dev removal (Dexuan Cui) - Fix Hyper-V build error in non-sysfs config (Randy Dunlap) - Reallocate to avoid Hyper-V domain number collisions (Haiyang Zhang) - Use Hyper-V instance ID bytes 4-5 to reduce domain collisions (Haiyang Zhang) * remotes/lorenzo/pci/hv: PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers PCI: hv: Detect and fix Hyper-V PCI domain number collision PCI: pci-hyperv: Fix build errors on non-SYSFS config PCI: hv: Avoid use of hv_pci_dev->pci_slot after freeing it
-
由 Bjorn Helgaas 提交于
- Make kirin_dw_pcie_ops constant (Nishka Dasgupta) - Make DesignWare "num-lanes" property optional and remove from relevant DTs (Hou Zhiqiang) * remotes/lorenzo/pci/dwc: arm64: dts: fsl: Remove num-lanes property from PCIe nodes ARM: dts: ls1021a: Remove num-lanes property from PCIe nodes PCI: dwc: Return directly when num-lanes is not found dt-bindings: PCI: designware: Remove the num-lanes from Required properties PCI: kirin: Make structure kirin_dw_pcie_ops constant
-
由 Bjorn Helgaas 提交于
- Add driver for Amazon Annapurna Labs PCIe controller (Jonathan Chocron) - Disable MSI-X since Annapurna Labs advertises it, but it's broken (Jonathan Chocron) - Disable VPD since Annapurna Labs advertises it, but it's broken (Jonathan Chocron) - Add ACS quirk since Annapurna Labs doesn't support ACS but does provide some equivalent protections (Ali Saidi) * remotes/lorenzo/pci/al: PCI: dwc: Add validation that PCIe core is set to correct mode PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port PCI: Add ACS quirk for Amazon Annapurna Labs root ports PCI: Add Amazon's Annapurna Labs vendor ID # Conflicts: # drivers/pci/quirks.c
-
由 Bjorn Helgaas 提交于
- Convert pci_resource_to_user() to a weak function to remove HAVE_ARCH_PCI_RESOURCE_TO_USER #defines (Denis Efremov) - Use PCI_SRIOV_NUM_BARS for idiomatic loop structure (Denis Efremov) - Fix Resizable BAR size suspend/restore for 1MB BARs (Sumit Saxena) - Correct "pci=resource_alignment" example in documentation (Alexey Kardashevskiy) * pci/resource: PCI: Correct pci=resource_alignment parameter example PCI: Restore Resizable BAR size bits correctly for 1MB BARs PCI: Use PCI_SRIOV_NUM_BARS in loops instead of PCI_IOV_RESOURCE_END PCI: Convert pci_resource_to_user() to a weak function # Conflicts: # drivers/pci/pci.c
-
由 Bjorn Helgaas 提交于
- Cleanup pciehp LED/indicator control with a new consolidated pciehp_set_indicators() interface that controls both Attention and Power Indicators (Denis Efremov) * pci/pciehp: PCI: pciehp: Refer to "Indicators" instead of "LEDs" in comments PCI: pciehp: Remove pciehp_green_led_{on,off,blink}() PCI: pciehp: Remove pciehp_set_attention_status() PCI: pciehp: Combine adjacent indicator updates PCI: pciehp: Add pciehp_set_indicators() to set both indicators
-
由 Bjorn Helgaas 提交于
- Move P2PCMA PCI bus offset from generic dev_pagemap to pci_p2pdma_pagemap (Logan Gunthorpe) - Add provider's pci_dev to pci_p2pdma_pagemap (Logan Gunthorpe) - Apply host bridge whitelist for ACS (Logan Gunthorpe) - Whitelist some Intel host bridges for P2PDMA (Logan Gunthorpe) - Add attrs to pci_p2pdma_map_sg() to match dma_map_sg() (Logan Gunthorpe) - Add pci_p2pdma_unmap_sg() (Logan Gunthorpe) - Store P2PDMA mapping method in xarray (Logan Gunthorpe) - Map requests that traverse a host bridge (Logan Gunthorpe) - Allow IOMMU for host bridge whitelist (Logan Gunthorpe) * pci/p2pdma: PCI/P2PDMA: Update pci_p2pdma_distance_many() documentation PCI/P2PDMA: Allow IOMMU for host bridge whitelist PCI/P2PDMA: dma_map() requests that traverse the host bridge PCI/P2PDMA: Store mapping method in an xarray PCI/P2PDMA: Factor out __pci_p2pdma_map_sg() PCI/P2PDMA: Introduce pci_p2pdma_unmap_sg() PCI/P2PDMA: Add attrs argument to pci_p2pdma_map_sg() PCI/P2PDMA: Whitelist some Intel host bridges PCI/P2PDMA: Factor out host_bridge_whitelist() PCI/P2PDMA: Apply host bridge whitelist for ACS PCI/P2PDMA: Factor out __upstream_bridge_distance() PCI/P2PDMA: Add constants for map type results to upstream_bridge_distance() PCI/P2PDMA: Add provider's pci_dev to pci_p2pdma_pagemap struct PCI/P2PDMA: Introduce private pagemap structure
-
由 Bjorn Helgaas 提交于
- Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra) * pci/msi: PCI/MSI: Enable PCI_MSI_IRQ_DOMAIN support for RISC-V
-
由 Bjorn Helgaas 提交于
- Use devm_add_action_or_reset() helper (Fuqian Huang) - Mark expected switch fall-through (Gustavo A. R. Silva) - Convert sysfs device attributes from __ATTR() to DEVICE_ATTR() (Kelsey Skunberg) - Convert sysfs file permissions from S_IRUSR etc to octal (Kelsey Skunberg) - Move SR-IOV sysfs functions to iov.c (Kelsey Skunberg) - Add pci_info_ratelimited() to ratelimit PCI messages separately (Krzysztof Wilczynski) - Fix "'static' not at beginning of declaration" warnings (Krzysztof Wilczynski) - Clean up resource_alignment parameter to not require static buffer (Logan Gunthorpe) - Add ACS quirk for iProc PAXB (Abhinav Ratna) - Add pci_irq_vector() and other stubs for !CONFIG_PCI (Herbert Xu) * pci/misc: PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI PCI: Add ACS quirk for iProc PAXB PCI: Force trailing new line to resource_alignment_param in sysfs PCI: Move pci_[get|set]_resource_alignment_param() into their callers PCI: Clean up resource_alignment parameter to not require static buffer PCI: Use static const struct, not const static struct PCI: Add pci_info_ratelimited() to ratelimit PCI separately PCI/IOV: Remove group write permission from sriov_numvfs, sriov_drivers_autoprobe PCI/IOV: Move sysfs SR-IOV functions to iov.c PCI: sysfs: Change permissions from symbolic to octal PCI: sysfs: Change DEVICE_ATTR() to DEVICE_ATTR_WO() PCI: sysfs: Define device attributes with DEVICE_ATTR*() PCI: Mark expected switch fall-through PCI: Use devm_add_action_or_reset()
-
由 Bjorn Helgaas 提交于
- Consolidate _HPP & _HPX code in pci-acpi.h and remove unnecessary struct hotplug_program_ops (Krzysztof Wilczynski) - Fixup PCIe device types to remove the need for dev->has_secondary_link (Mika Westerberg) * pci/enumeration: PCI: Get rid of dev->has_secondary_link flag PCI: Make pcie_downstream_port() available outside of access.c PCI/ACPI: Remove unnecessary struct hotplug_program_ops PCI/ACPI: Move _HPP & _HPX functions to pci-acpi.c PCI/ACPI: Rename _HPX structs from hpp_* to hpx_*
-
由 Bjorn Helgaas 提交于
- Move many symbols from public linux/pci.h to subsystem-private drivers/pci/pci.h (Kelsey Skunberg) - Unexport pci_bus_get() and pci_bus_sem since they're not needed by modules (Kelsey Skunberg) - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg) * pci/encapsulate: PCI: Make pci_set_of_node(), etc private PCI: Make pci_enable_ptm() private PCI: Make pcie_set_ecrc_checking(), pcie_ecrc_get_policy() private PCI: Make pci_ats_init() private PCI: Make pcie_update_link_speed() private PCI: Make pci_bus_get(), pci_bus_put() private PCI: Make pci_hotplug_io_size, mem_size, and bus_size private PCI: Make pci_save_vc_state(), pci_restore_vc_state(), etc private PCI: Make pci_get_host_bridge_device(), pci_put_host_bridge_device() private PCI: Make pci_check_pme_status(), pci_pme_wakeup_bus() private PCI: Make PCI_PM_* delay times private PCI: Unexport pci_bus_sem PCI: Unexport pci_bus_get() and pci_bus_put() PCI: Remove pci_block_cfg_access() et al (unused)
-
由 Bjorn Helgaas 提交于
- Consolidate ASPM interfaces in linux/pci.h (Krzysztof Wilczynski) * pci/aspm: PCI: Move ASPM declarations to linux/pci.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching由 Linus Torvalds 提交于
Pull livepatching fix from Jiri Kosina: "Error handling fix in livepatching module notifier, from Miroslav Benes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: livepatch: Nullify obj->mod in klp_module_coming()'s error path
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid由 Linus Torvalds 提交于
Pull HID updates from Jiri Kosina: - syzbot memory corruption fixes for hidraw, Prodikeys, Logitech and Sony drivers from Alan Stern and Roderick Colenbrander - stuck 'fn' key fix for hid-apple from Joao Moreno - proper propagation of EPOLLOUT from hiddev and hidraw, from Fabian Henneke - fixes for handling power management for intel-ish devices with NO_D3 flag set, from Zhang Lixu - extension of supported usage range for customer page, as some Logitech devices are actually making use of it. From Olivier Gay. - hid-multitouch is no longer filtering mice node creation, from Benjamin Tissoires - MobileStudio Pro 13 support, from Ping Cheng - a few other device ID additions and assorted smaller fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (27 commits) HID: core: fix dmesg flooding if report field larger than 32bit HID: core: Add printk_once variants to hid_warn() etc HID: core: reformat and reduce hid_printk macros HID: prodikeys: Fix general protection fault during probe HID: wacom: add new MobileStudio Pro 13 support HID: sony: Fix memory corruption issue on cleanup. HID: i2c-hid: modify quirks for weida's devices HID: apple: Fix stuck function keys when using FN HID: sb0540: add support for Creative SB0540 IR receivers HID: Add quirk for HP X500 PIXART OEM mouse HID: logitech-dj: Fix crash when initial logi_dj_recv_query_paired_devices fails hid-logitech-dj: add the new Lightspeed receiver HID: logitech-dj: add support of the G700(s) receiver HID: multitouch: add support for the Smart Tech panel HID: multitouch: do not filter mice nodes HID: do not call hid_set_drvdata(hdev, NULL) in drivers HID: wacom: do not call hid_set_drvdata(hdev, NULL) HID: logitech: Fix general protection fault caused by Logitech driver HID: hidraw: Fix invalid read in hidraw_ioctl HID: wacom: support named keys on older devices ...
-
git://github.com/micah-morton/linux由 Linus Torvalds 提交于
Pull SafeSetID fix from Micah Morton: "Jann Horn sent some patches to fix some bugs in SafeSetID for 5.3. After he had done his testing there were a couple small code tweaks that went in and caused this bug. From what I can see SafeSetID is broken in 5.3 and crashes the kernel every time during initialization if you try to use it. I came across this bug when backporting Jann's changes for 5.3 to older kernels (4.14 and 4.19). I've tested on a Chrome OS device with those kernels and verified that this change fixes things. It doesn't seem super useful to have this bake in linux-next, since it is completely broken in 5.3 and nobody noticed" * tag 'safesetid-bugfix-5.4' of git://github.com/micah-morton/linux: LSM: SafeSetID: Stop releasing uninitialized ruleset
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux由 Linus Torvalds 提交于
Pull selinux updates from Paul Moore: - Add LSM hooks, and SELinux access control hooks, for dnotify, fanotify, and inotify watches. This has been discussed with both the LSM and fs/notify folks and everybody is good with these new hooks. - The LSM stacking changes missed a few calls to current_security() in the SELinux code; we fix those and remove current_security() for good. - Improve our network object labeling cache so that we always return the object's label, even when under memory pressure. Previously we would return an error if we couldn't allocate a new cache entry, now we always return the label even if we can't create a new cache entry for it. - Convert the sidtab atomic_t counter to a normal u32 with READ/WRITE_ONCE() and memory barrier protection. - A few patches to policydb.c to clean things up (remove forward declarations, long lines, bad variable names, etc) * tag 'selinux-pr-20190917' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: lsm: remove current_security() selinux: fix residual uses of current_security() for the SELinux blob selinux: avoid atomic_t usage in sidtab fanotify, inotify, dnotify, security: add security hook for fs notifications selinux: always return a secid from the network caches if we find one selinux: policydb - rename type_val_to_struct_array selinux: policydb - fix some checkpatch.pl warnings selinux: shuffle around policydb.c to get rid of forward declarations
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fixes froim Herbert Xu: "This fixes the following issues: - potential boot hang in hwrng - missing switch/break in talitos - bugs and warnings in hisilicon - build warning in inside-secure" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: hisilicon - avoid unused function warning hwrng: core - don't wait on add_early_randomness() crypto: hisilicon - Fix return value check in hisi_zip_acompress() crypto: hisilicon - Matching the dma address for dma_pool_free() crypto: hisilicon - Fix double free in sec_free_hw_sgl() crypto: inside-secure - Fix unused variable warning when CONFIG_PCI=n crypto: talitos - fix missing break in switch statement
-
- 23 9月, 2019 8 次提交
-
-
由 Jiri Kosina 提交于
- MobileStudio Pro 13 support, from Ping Cheng - a few other assorted fixes Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
- support for Creative SB0540 IR receivers, from Bastien Nocera Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
- support for the Smart Tech panel, from Benjamin Tissoires - hid-multitouch is no longer filtering mice node creation, from Benjamin Tissoires Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
- extension of supported usage range for customer page, as some Logitech devices are actually making use of it. From Olivier Gay. - support for Lightspeed and G700(s) receivers from Filipe Laíns and Benjamin Tissoires Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
- fixes for handling power management for intel-ish devices with NO_D3 flag set, from Zhang Lixu Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
- proper propagation of EPOLLOUT from hiddev and hidraw, from Fabian Henneke Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
- fixes for formatting / ratelimiting kernel log by HID core, from Joshua Clayton Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
- cleanup of ->drvdata handling between HID core and drivers, from Benjamin Tissoires Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-