I noticed on 2.6.16-rc4 that my MPU-401 wasn't functional, due to a simple
copy & paste error in sound/isa/cs423x/cs4236.c.
Acked-by: NTakashi Iwai <tiwai@suse.de>
Cc: Jaroslav Kysela <perex@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix and update for gcc-4.0.

- arch/m32r/kernel/signal.c:
  Change type of the 8th parameter of sys_rt_sigsuspend() from
  'struct pt_regs' to 'struct pt_regs *'.
  This functions make use of the 'regs' parameter to return status value,
  but gcc-4.0 optimizes and removes it as a dead code.
  Functions, sys_sigaltstack() and sys_rt_sigreturn(), have also modified.

- arch/m32r/lib/usercopy.c, include/asm-m32r/uaccess.h:
  Add early-clobber constraints('&') to output values of asm statements;
  these constraints seems to be required for gcc-4.0 register assignment.
Signed-off-by: NHayato Fujiwara <fujiwara@linux-m32r.org>
Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add -O2 option to AFLAGS to enable asm code optimization for m32r.

On m32r gas, "-m32r2 -O" option enables assembler's parallel code
generation optimization for M32R2 ISA as a default.  So, "-no-parallel"
option is required explicitly for a cpu core with single instuction
issuing, for example, VDEC2.
Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

drivers/net/tlan.c compiles with CONFIG_PCI=n only with a warning and
due to the dead code elimination of gcc.

Additionally, this fixes the only compile error I found with
CONFIG_PCI=n and the gcc -Werror-implicit-function-declaration
flag on i386.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

tty_schedule_flip() would schedule a thread that would call flush_to_ldisc().
If tty_buffer_request_room() gets called prior to that thread running --
which is likely in this loop in hvc_poll(), it would set the active flag
in the tty buffer and consequently flush_to_ldisc() would ignore it.

The result is that input on the hvc console is not processed.

This fix calls tty_flip_buffer_push (and flags the tty as
"low_latency").  The push to the ldisc thus happens synchronously.
Signed-off-by: NMichal Ostrowski <mostrows@watson.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Maple firmware does not need PCI resource allocation, and in fact, it
can cause problems in some strange cases.
Signed-off-by: NSegher Boessenkool <segher@kernel.crashing.org>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Do disable, not enable, the HT APIC IRQ in the function that is
supposed to.
Enable the MPIC IRQ before enabling the downstream APIC IRQ, avoids
potentially losing an interrupt.
Signed-off-by: NSegher Boessenkool <segher@kernel.crashing.org>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Update defconfigs for g5, pseries and generic ppc64. Default choices
for everything, with the following exceptions:

 * Enable WINDFARM_PM112 on g5 and ppc64.
 * Increase CONFIG_NR_CPUS to 4 in g5_defconfig
 * CONFIG_TIGON3=y instead of =m in g5_defconfig
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

HMT support is currently broken and needs to be reworked to play nicely
with the SMT scheduler. Remove the bit rotten bits for the time being.

I also updated an incorrect comment, we enter __secondary_hold with the
physical cpu id in r3.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The runlatch SPR can take a lot of time to write. My original runlatch
code would set it on every exception entry even though most of the time
this was not required. It would also continually set it in the idle
loop, which is an issue on an SMT capable processor.

Now we cache the runlatch value in a threadinfo bit, and only check for
it in decrementer and hardware interrupt exceptions as well as the idle
loop. Boot on POWER3, POWER5 and iseries, and compile tested on pmac32.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

native_hpte_clear has a spinlock recursion problem with the native_tlbie_lock
being called twice, once in native_hpte_clear() and once within tlbie().
Fix the problem by changing the call to tlbie() in native_hpte_clear() to
__tlbie(). It still supports only 4k pages for now.
Signed-off-by: NR Sharada <sharada@in.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Disable OProfile in Kconfig for iSeries to prevent hangs.  OProfile
was not originally intended to work with legacy iSeries.
Signed-off-by: NKelly Daly <kelly@au.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

On the 83xx platform to ensure the PCI inbound memory is handled properly we
have to turn on coherency for all pages in the MMU.  Otherwise we see
corruption if inbound "prefetching/streaming" is enabled on the PCI controller.
Signed-off-by: NRandy Vinson <rvinson@mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

altivec_unavailable_exception is called without setting r3... it looks like
the r3 that actually gets passed in as struct pt_regs *regs is the
undisturbed value of r3 at the time the altivec instruction was encountered.
The user actually gets to choose the pt_regs printed in the Oops!

This fixes the oops by passing the correct pt_regs pointer to
altivec_unavailable_exception.
Signed-off-by: NAlan Curry <pacman@TheWorld.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The panic CPU is waiting forever due to some large timeout value if some
CPU is not responding to an IPI.
This patch fixes the problem - the maximum waiting period will be
10 seconds and then the kdump boot will go ahead.
Signed-off-by: NHaren Myneni <haren@us.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Fix up xmon compilation after the last change.
Remove lots of dead code, all the pmac and chrp support is in arch/powerpc
Signed-off-by: NOlaf Hering <olh@suse.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

For kexec we need to know the size of the MMU hash table.

Currently we calculate the size once in the htab code, and then twice more in
the kexec code, once using htab_hash_mask and once using ppc64_pft_size.
On some machines the ppc64_pft_size calculation is broken because
ppc64_pft_size is not set.

So we need to fix the second calculation, but better still we should just
calculate the size once and use it everywhere else.

Tested on Power5 LPAR, Power4 non-LPAR and Power3.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The most usable number of ifb devices is 2. Change the default to 2.
Signed-off-by: NRichard Lucassen <spamtrap@lucassen.org>
Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should use the TOS because it's one of the routing keys.  It also
means that we update the correct routing cache entry when PMTU occurs.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When you turn off ARP on a netdevice then the first packet always goes
out with a dstMAC of all zeroes. This is because the first packet is
used to resolve ARP entries. Even though the ARP entry may be resolved
(I tried by setting a static ARP entry for a host i was pinging from),
it gets overwritten by virtue of having the netdevice disabling ARP.

Subsequent packets go out fine with correct dstMAC address (which may
be why people have ignored reporting this issue).

To cut the story short: 

the culprit code is in net/ethernet/eth.c::eth_header()

----
        /*
         *      Anyway, the loopback-device should never use this
function...
         */

        if (dev->flags & (IFF_LOOPBACK|IFF_NOARP))
        {
                memset(eth->h_dest, 0, dev->addr_len);
                return ETH_HLEN;
        }

	if(daddr)
        {
                memcpy(eth->h_dest,daddr,dev->addr_len);
                return ETH_HLEN;
        }

----

Note how the h_dest is being reset when device has IFF_NOARP.

As a note:
All devices including loopback pass a daddr. loopback in fact passes
a 0 all the time ;-> 
This means i can delete the check totaly or i can remove the IFF_NOARP

Alexey says:
--------------------
I think, it was me who did this crap. It was so long ago I do not remember
why it was made.

I remember some troubles with dummy device. It tried to resolve
addresses, apparently, without success and generated errors instead of
blackholing. I think the problem was eventually solved at neighbour
level.

After some thinking I suspect the deletion of this chunk could change
behaviour of some parts which do not use neighbour cache f.e. packet
socket.

I think safer approach would be to move this chunk after if (daddr).
And the possibility to remove this completely could be analyzed later.
--------------------

Patch updated with Alexey's safer suggestions.
Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca>
Acked-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We often just do an atomic_dec(&x->refcnt) on an xfrm_state object
because we know there is more than 1 reference remaining and thus
we can elide the heavier xfrm_state_put() call.

Do this behind an inline function called __xfrm_state_put() so that is
more obvious and also to allow us to more cleanly add refcount
debugging later.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When garbage collecting route cache entries of multipath routes
in rt_garbage_collect(), entries were deleted from the hash bucket
'i' while holding a spin lock on bucket 'k' resulting in a system
hang.  Delete entries, if any, from bucket 'k' instead.
Signed-off-by: NSuresh Bhogavilli <sbhogavilli@verisign.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The bridge-netfilter code attaches a fake dst_entry with dst->ops == NULL
to purely bridged packets. When these packets are SNATed and a policy
lookup is done, xfrm_lookup crashes because it tries to dereference
dst->ops.

Change xfrm_lookup not to dereference dst->ops before checking for the
DST_NOXFRM flag and set this flag in the fake dst_entry.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a race between updating the irq mask and setting it
which can be triggered on SMP with a bad cable.
Similar patch from Ingo Molnar and Thomas Gleixner
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>

The SysKonnect Genesis based board would fail on initialization
with phy_read errors caused by not waiting for last phy write.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>

Fix a race in the receive NAPI, irq handling. The interrupt clear and the
start need to be separated.  Otherwise there is a window between the last
frame received and the NAPI done level handling.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>

Similar to 8139cp code but more inspired/lucky.
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>

rtl8169_hw_start() requires that the descriptor ring indexes be
set to zero. Let a deferred invocation of rtl8169_reset_task()
handle it. Enabling a few power management bits will not hurt
either.

suspend/resume is issued with irq on: the spinlock do not need
to save the irq flag.
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>

When I changed the hvlpevent_queue code to use a spinlock instead of a
custom atomic (719d1cd8) I didn't
initialise the lock anywhere, oops.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Since about Linux 2.6.14, sbp2's inquiry workaround did not work anymore
due to changes in the SCSI layer. Update it to become effective again.
Testing one of the two known affected bridges has shown that skip_ms_page_8
is required as well.

Also, make force_inquiry_hack tunable via /sys/module/sbp2/parameters.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NJody McIntyre <scjody@modernduck.com>
(cherry picked from 99496037c6744fd938ffb8ccfc8fc91762322ff8 commit)

Let the ieee1394 core select a suitable 1394 address range for sbp2's
status FIFO instead of using a fixed range. Since the core only selects
addresses which are guaranteed to be out of the "physical range" as per
OHCI 1.1, this patch also fixes an old bug:

OHCI controllers which implement a writeable PhysicalUpperBound register
included sbp2's status FIFO in the physical range. That way sbp2 was
never notified of a succesful login and always failed after timeout.
Affected OHCI host adapters include ALi and Fujitsu controllers.

As another side effect of this patch, the status FIFO is no longer
located in a range for which OHCI chips perform "posted writes". Each
status write now requires a response subaction. But since large data
transfers involve only few status writes, there is no measurable
decrease of I/O throughput. What's more, the status FIFO is now safe
from potential host bus errors. Nevertheless, posted writes could be
re-enabled by extensions to the ARM features of the 1394 stack.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NJody McIntyre <scjody@modernduck.com>
(cherry picked from b2d38cccad4ef80d6b672b8f89aae5fe2907b113 commit)

If there were commands enqueued but not completed before an SBP-2 unit
was unplugged (or an attempt to reconnect failed), knodemgrd or any
process which tried to remove the device would sleep uninterruptibly
in blk_execute_rq().  Therefore make sure that all commands are
completed when sbp2 retreats.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NJody McIntyre <scjody@modernduck.com>
(cherry picked from 61daa34c132c5d4ed8630e2c46e9bf2f0c7b3428 commit)

Need to avoid race in updating IRQ mask.  This can probably be replaced
smarter use of the interrupt control registers (if/when chipset
docs are available).
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>

To avoid problems with PCI config access without ACPI (or busted ACPI tables),
use the device's window into PCI config space.

I know this probably will upset the purists, but I would rather have users
than ACPI testers. It also generates less code.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>

Need to force a transmit coalesce timer restart after processing
transmit packets. Otherwise, can get transmit status after last
update and chip doesn't send the next one.

Can go with the chip defaults for coalescing timers, except for
Tx timer which needs to be bigger.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>

Need to restart the interrupt coalescing timer after clearing the interrupt,
to avoid races with interrupt timer and processing.

Patch from Carl-Daniel Halfinger
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>