Add logical mapping for VDBOXs. This mapping is required for
split-frame workloads, which otherwise fail with

	00000000-F8C53528: [GUC] 0441-INVALID_ENGINE_SUBMIT_MASK

... if the application is using the logical id to reorder the engines and
then using it for the batch buffer submission. It's not a big problem on
media version 11 and 12 as they have only 2 instances of VCS and the
logical to physical mapping is monotonically increasing - if the
application is not using the logical id.

Changing it for the previous platforms allows the media driver
implementation for the next ones (12.50 and above) to be the same,
checking the logical id. It should also not introduce any bug for the
old versions of userspace not checking the id.

The mapping added here is the complete map needed by XEHPSDV. Previous
platforms with only 2 instances will just use a partial map and should
still work.

v2: Remove static from map variable (José)

Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
[ Extend the mapping to media versions 11 and 12 and give proper
  justification in the commit message why ]
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Acked-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220316234538.434357-2-lucas.demarchi@intel.com

Starting with DG2, preemption can no longer be controlled using userspace
on a per-context basis. Instead, the hardware only allows us to enable or
disable preemption in a global, system-wide basis.  Also, we lose the
ability to specify the preemption granularity (such as batch-level vs
command-level vs object-level).

v2 (MattR):
 - Move debugfs interface to a separate patch.  (Jani)
v3 (MattR):
 - Drop the debugfs support completely for now.

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: NAkeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318021051.2073847-1-matthew.d.roper@intel.com

Implement support for fetching the hardware description table from the
GuC. The call is made twice - once without a destination buffer to
query the size and then a second time to fill in the buffer.

The table is stored in the GT structure so that it can be fetched once
at driver load time. Keeping inside a GuC structure would mean it
would be release and reloaded on a GuC reset (part of a full GT
reset). However, the table does not change just because the GT has been
reset and the GuC reloaded. Also, dynamic memory allocations inside
the reset path are a problem.

Note that the table is only available on ADL-P and later platforms.

v2 (John's v2 patch):
 * Move to GT level to avoid memory allocation during reset path (and
   unnecessary re-read of the table on a reset).

v5 (of Jordan's posting):
 * Various changes made by Jordan and recommended by Michal
   - Makefile ordering
   - Adjust "struct intel_guc_hwconfig hwconfig" comment
   - Set Copyright year to 2022 in intel_guc_hwconfig.c/.h
   - Drop inline from hwconfig_to_guc()
   - Replace hwconfig param with guc in __guc_action_get_hwconfig()
   - Move zero size check into guc_hwconfig_discover_size()
   - Change comment to say zero size offset/size is needed to get size
   - Add has_guc_hwconfig to devinfo and drop has_table()
   - Change drm_err to notice in __uc_init_hw() and use %pe

v6 (of Jordan's posting):
 * Added a couple more small changes recommended by Michal
 * Merge in John's v2 patch, but note:
   - Using drm_notice as recommended by Michal
   - Reverted Michal's suggestion of using devinfo

v7 (of Jordan's posting):
 * Change back to drm_err as preferred by John

Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Acked-by: NJon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: NJordan Justen <jordan.l.justen@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220306232157.1174335-2-jordan.l.justen@intel.com

Add a generic interface for allocating an object at some specific
offset, and convert stolen over. Later we will want to hook this up to
different backends.
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: NNirmoy Das <nirmoy.das@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315181425.576828-4-matthew.auld@intel.com

Just pass along the probed io_size. The backend should be able to
utilize the entire range here, even if some of it is non-mappable.

It does leave open with what to do with stolen local-memory.
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: NThomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: NNirmoy Das <nirmoy.das@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315181425.576828-1-matthew.auld@intel.com

Upcoming patches will need to steer writes to multicast registers as
well as reading them.

Although the setting of the 'multicast' bit should only really matter
for write operations (reads always operate in a unicast manner and give
us the result from one specific instance), Wa_22013088509 suggests that
we leave the multicast bit enabled when performing read operations, so
we follow suit here.

Cc: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220314234203.799268-4-matthew.d.roper@intel.com

GuC has its own steering mechanism and can't use the default set by i915,
so we need to provide the steering information that the FW will need to
save/restore registers while processing an engine reset. The GUC
interface allows us to do so as part of the register save/restore list
and it requires us to specify the steering for all multicast register, even
those that would be covered by the default setting for cpu access. Given
that we do not distinguish between registers that do not need steering and
registers that are guaranteed to work the default steering, we set the
steering for all entries in the guc list that do not require a special
steering (e.g. mslice) to the default settings; this will cost us a few
extra writes during engine reset but allows us to keep the steering
logic simple.

Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220314234203.799268-3-matthew.d.roper@intel.com

Add a new 'steering' node in each gt's debugfs directory that tells
whether we're using explicit steering for various types of MCR ranges
and, if so, what MMIO ranges it applies to.

We're going to be transitioning away from implicit steering, even for
slice/dss steering soon, so the information reported here will become
increasingly valuable once that happens.

v2:
 - Adding missing 'static' on intel_steering_types[]  (Jose, sparse)
v3:
 - "static const char *" -> "static const char * const" (sparse)

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315170250.954380-1-matthew.d.roper@intel.com

sseu_dev_info is already a pretty large structure which will likely
continue to grow when future platforms increase potential DSS and EU
counts.  Let's switch the stack placement of this structure in debugfs
with a dynamic allocation.
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315020805.844962-1-matthew.d.roper@intel.com

When running on Xe_HP or beyond, let's use an updated format for
describing topology in our error state dumps and debugfs to give a
more accurate view of the hardware:

 - Just report DSS directly without the legacy "slice0" output that's no
   longer meaningful.
 - Indicate whether each DSS is accessible for geometry and/or compute.
 - Rename "rcs_topology" to "sseu_topology" since the information
   reported is common to both RCS and CCS engines now.

v2:
 - Name static functions in a more consistent manner.  (Lucas)
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311225459.385515-2-matthew.d.roper@intel.com

Xe_HP removed "slice" as a first-class unit in the hardware design.
Instead we now have a single pool of subslices (which are now referred
to as "DSS") that different hardware units have different ways of
grouping ("compute slices," "geometry slices," etc.).  For the purposes
of topology representation, we treat Xe_HP-based platforms as having a
single slice that contains all of the platform's DSS.  There's no need
to allocate storage space for (max legacy slices * max dss); let's
update some of our macros to minimize the storage requirement for sseu
topology.  We'll also document some of the constants to make it a little
bit more clear what they represent.

v2:
 - s/LEGACY/HSW/ in macro names.  (Lucas)
 - Rename MAX() to SSEU_MAX() to avoid any potential clashes with other
   definitions elsewhere.  Unfortunately max()/max_t() from
   linux/minmax.h cannot be used in this context.  (Lucas)
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311225459.385515-1-matthew.d.roper@intel.com

We shouldn't really be keeping track of how many SFC_DONE registers
our platforms can have, but rather how many SFC hardware units there can
be (each SFC unit will have one corresponding SFC_DONE register).  So
drop the stray GEN12_SFC_DONE_MAX definition we had in the register
definition file and replace it with an I915_MAX_SFC that follows the
pattern we use for other hardware units.  Note that our hardware has a
2:1:1 ratio of VD:VE:SFC, and as far as we know that pattern should
carry forward to future platforms, so we'll define it as #VCS/2.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311062835.163744-1-matthew.d.roper@intel.com

Platforms with FlatCCS do not use auxiliary planes for compression
control data and thus do not need traditional aux table invalidation
(and the registers no longer even exist).

Original-author: CQ Tang
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301052952.1706597-1-matthew.d.roper@intel.com

Currently this will enforce both 2M alignment and padding for any LMEM
pages inserted into the GGTT. However, this was only meant to be applied
to the compact-pt layout with the ppGTT. For the GGTT we can reduce the
alignment and padding to 64K.

Bspec: 45015
Fixes: 87bd701e ("drm/i915: enforce min GTT alignment for discrete cards")
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Robert Beckett <bob.beckett@collabora.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: NThomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303100229.839282-1-matthew.auld@intel.com

vms are not getting properly closed. Rather than fixing that,
Remove the vm open count and instead rely on the vm refcount.

The vm open count existed solely to break the strong references the
vmas had on the vms. Now instead make those references weak and
ensure vmas are destroyed when the vm is destroyed.

Unfortunately if the vm destructor and the object destructor both
wants to destroy a vma, that may lead to a race in that the vm
destructor just unbinds the vma and leaves the actual vma destruction
to the object destructor. However in order for the object destructor
to ensure the vma is unbound it needs to grab the vm mutex. In order
to keep the vm mutex alive until the object destructor is done with
it, somewhat hackishly grab a vm_resv refcount that is released late
in the vma destruction process, when the vm mutex is no longer needed.

v2: Address review-comments from Niranjana
- Clarify that the struct i915_address_space::skip_pte_rewrite is a hack
  and should ideally be replaced in an upcoming patch.
- Remove an unneeded continue in clear_vm_list and update comment.

v3:
- Documentation update
- Commit message formatting
Co-developed-by: NNiranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: NNiranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: NThomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: NNiranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220304082641.308069-2-thomas.hellstrom@linux.intel.com

If RCS is not enumerated, GuC will return invalid parameters.
Make sure we do not send RCS supported when we have not enumerated
it.

Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NStuart Summers <stuart.summers@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303223435.2793124-2-matthew.d.roper@intel.com

In the past we've always assumed that an RCS engine is present on every
platform.  However now that we have compute engines there may be
platforms that have CCS engines but no RCS, or platforms that are
designed to have both, but have the RCS engine fused off.

Various engine-centric initialization that only needs to be done a
single time for the group of RCS+CCS engines can't rely on being setup
with the RCS now; instead we add a I915_ENGINE_FIRST_RENDER_COMPUTE flag
that will be assigned to a single engine in the group; whichever engine
has this flag will be responsible for some of the general setup
(RCU_MODE programming, initialization of certain workarounds, etc.).
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303223435.2793124-1-matthew.d.roper@intel.com

Some G2H handlers were reading the context id field from the payload
before checking the payload met the minimum length required.
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302003357.4188363-9-John.C.Harrison@Intel.com

The CTB registration process changed significantly a while back using
a single KLV based H2G. So drop the original and now obsolete H2G
definitions.
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302003357.4188363-8-John.C.Harrison@Intel.com

The LRC descriptor pool is going away. So, stop naming context ids as
descriptor pool indecies.

While at it, add a bunch of missing line feeds to some error messages.
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302003357.4188363-7-John.C.Harrison@Intel.com

The LRC descriptor was being initialised early on in the context
registration sequence. It could then be determined that the actual
registration needs to be delayed and the descriptor would be wiped
out. This is inefficient, so move the setup to later in the process
after the point of no return.

v2: Move some split changes into the split patch (and do them
correctly).
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302003357.4188363-6-John.C.Harrison@Intel.com

The LRC descriptor pool is going away. Further, the function that was
populating it was also doing a bunch of logic about the context
registration sequence. So, split that code apart into separate state
setup and try to register functions. Note that some of those 'try to
register' code paths actually undo the state setup and leave it to be
redone again later (with potentially different values). This is
inefficient. The next patch will correct this.

Also, move a comment about ignoring return values to the place where
the return values are actually ignored.

v2: Move some more splitting from a later patch (and do it correctly).
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302003357.4188363-5-John.C.Harrison@Intel.com

The LRC descriptor pool is going away. So, stop using it as the limit
for how many context ids are available. Instead, size the pool
according to the number of contexts allowed. Note that this is just a
naming change, the actual limit is identical in value.

While at it, also update a kzalloc(sizeof()*count) to be a
kcalloc(count,size).
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302003357.4188363-4-John.C.Harrison@Intel.com

The LRC descriptor pool is going away. So, stop using it as a check
for whether submission has been initialised or not.
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302003357.4188363-3-John.C.Harrison@Intel.com

The LRC descriptor pool is going away. So, stop using it as a check for
context registration, use the GuC id instead (being the thing that
actually gets registered with the GuC).

Also, rename the set/clear/query helper functions for context id
mappings to better reflect their purpose and to differentiate from
other registration related helper functions.
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302003357.4188363-2-John.C.Harrison@Intel.com

Registers that exist in the shared render/compute reset domain need to
be placed on an engine workaround list to ensure that they are properly
re-applied whenever an RCS or CCS engine is reset.  We have a number of
workarounds (updating registers MLTICTXCTL, L3SQCREG1_CCS0,
GEN12_MERT_MOD_CTRL, and GEN12_GAMCNTRL_CTRL) that are incorrectly
implemented on the 'gt' workaround list and need to be moved
accordingly.

Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: NSrinivasan Shanmugam <srinivasan.s@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-14-matthew.d.roper@intel.com

Additional workarounds are required once we start exposing CCS engines.

Note that we have a number of workarounds that update registers in the
shared render/compute reset domain.  Historically we've just added such
registers to the RCS engine's workaround list.  But going forward we
should be more careful to place such workarounds on a wa_list for an
engine that definitely exists and is not fused off (e.g., a platform
with no RCS would never apply the RCS wa_list).  We'll keep
rcs_engine_wa_init() focused on RCS-specific workarounds that only need
to be applied if the RCS engine is present.  A separate
general_render_compute_wa_init() function will be used to define
workarounds that touch registers in the shared render/compute reset
domain and that we need to apply regardless of what render and/or
compute engines actually exist.  Any workarounds defined in this new
function will internally be added to the first present RCS or CCS
engine's workaround list to ensure they get applied (and only get
applied once rather than being needlessly re-applied several times).

Co-author: Srinivasan Shanmugam
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-13-matthew.d.roper@intel.com

HW resources are divided across the active CCS engines at the compute
slice level, with each CCS having priority on one of the cslices.
If a compute slice has no enabled DSS, its paired compute engine is not
usable in full parallel execution because the other ones already fully
saturate the HW, so consider it fused off.

v2 (José):
 - moved it to its own function
 - fixed definition of ccs_mask

v3 (Matt):
 - Replace fls() condition with a simple IP version test

v4 (Matt):
 - Don't try to calculate a ccs_mask using
   intel_slicemask_from_dssmask() until we've determined that we're
   running on an Xe_HP platform where the logic makes sense (and won't
   overflow).

Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NStuart Summers <stuart.summers@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302052008.1884985-1-matthew.d.roper@intel.com

A different emit breadcrumbs ring programming is required for compute /
render and we don't have UMD user so just reject parallel submission for
these engine classes.
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-11-matthew.d.roper@intel.com

Tell GuC that CCS is enabled by setting the CCS mask in its ADS.

Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Original-author: Michel Thierry
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-10-matthew.d.roper@intel.com

We have to specify in the Render Control Unit Mode register
when CCS is enabled.

v2:
 - Move RCU_MODE programming to a helper function.  (Tvrtko)
 - Clean up and clarify comments.  (Tvrtko)
 - Add RCU_MODE to the GuC save/restore list.  (Daniele)
v3:
 - Move this patch before the GuC ADS update to enable compute engines;
   the definition of RCU_MODE and its insertion into the save/restore
   list moves to this patch.  (Daniele)
v4:
 - Call xehp_enable_ccs_engines() directly in guc_resume() and
   execlists_resume() rather than adding an extra layer of wrapping to
   the engine->resume() vfunc.  (Umesh)

Bspec: 46034
Original-author: Michel Thierry
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NAravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NUmesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302001554.1836066-1-matthew.d.roper@intel.com

In Dual Context mode the EUs are shared between render and compute
command streamers. The hardware provides a field in the lrc descriptor
to indicate the prioritization of the thread dispatch associated to the
corresponding context.

The context priority is set to 'low' at creation time and relies on the
existing context priority to set it to low/normal/high.

Bspec: 46145, 46260
Original-author: Michel Thierry
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: NAravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: NPrasad Nallani <prasad.nallani@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-8-matthew.d.roper@intel.com

This is a more appropriate header for these definitions.

v2:
 - Cleanup whitespace. (Lucas)
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-7-matthew.d.roper@intel.com

The compute engine handles the same commands the render engine can
(except 3D pipeline), so it makes sense that CCS is more similar to RCS
than non-render engines.

The CCS context state (lrc) is also similar to the render one, so reuse
it. Note that the compute engine has its own CTX_R_PWR_CLK_STATE
register.

In order to avoid having multiple RCS && CCS checks, add the following
engine flag:
 - I915_ENGINE_HAS_RCS_REG_STATE - use the render (larger) reg state ctx.

BSpec: 46260
Original-author: Michel Thierry
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NAravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-6-matthew.d.roper@intel.com

CCS will reuse the RCS functions for breadcrumb and flush emission.
However, CCS pipe_control has additional programming restrictions:
 - Command Streamer Stall Enable must be always set
 - Post Sync Operations must not be set to Write PS Depth Count
 - 3D-related bits must not be set

v2:
 - Drop unwanted blank line.  (Lucas)

Bspec: 47112
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NAravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-5-matthew.d.roper@intel.com

Add execlists and GuC interrupts for compute CS into existing IRQ handlers.

All compute command streamers belong to the same compute class, so the
only change needed to enable their interrupts is to program their GT engine
interrupt mask registers.

CCS0 shares the register with CCS1, while CCS2 and CCS3 are in a new one.

BSpec: 50844, 54029, 54030, 53223, 53224.
Original-author: Michel Thierry
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NAravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-4-matthew.d.roper@intel.com

The reset domain is shared between render and all compute engines,
so resetting one will affect the others.

Note:  Before performing a reset on an RCS or CCS engine, the GuC will
attempt to preempt-to-idle the other non-hung RCS/CCS engines to avoid
impacting other clients (since some shared modules will be reset).  If
other engines are executing non-preemptable workloads, the impact is
unavoidable and some work may be lost.

Bspec: 52549
Original-author: Michel Thierry
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NAravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-3-matthew.d.roper@intel.com

Introduce a Compute Command Streamer (CCS), which has access to
the media and GPGPU pipelines (but not the 3D pipeline).

To begin with, define the compute class/engine common functions, based
on the existing render ones.

v2:
 - Add kerneldoc for drm_i915_gem_engine_class since we're adding a new
   element to it.  (Daniel)
 - Make engine class <-> guc class converters use lookup tables to make
   it more clear/explicit how the IDs map.  (Tvrtko)

v3:
 - Don't update uapi for now; we'll just include the driver-internal
   changes for the time being.

Bspec: 46167, 45544
Original-author: Michel Thierry
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NAravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-2-matthew.d.roper@intel.com

It is possible for reset notifications to arrive for a context that is
in the process of being banned. So don't flag these as an error, just
report it as informational (because it is still useful to know that
resets are happening even if they are being ignored).

v2: Better wording for the message (review feedback from Tvrtko).
v3: Fix rebase issue (review feedback from Daniele).
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225015232.1939497-1-John.C.Harrison@Intel.com

Move initialization of submission-related spinlock, lists and workers to
init_early. This fixes an issue where if the GuC init fails we might
still try to get the lock in the context cleanup code. Note that it is
safe to call the GuC context cleanup code even if the init failed
because all contexts are initialized with an invalid GuC ID, which will
cause the GuC side of the cleanup to be skipped, so it is easier to just
make sure the variables are initialized than to special case the cleanup
to handle the case when they're not.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/4932Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215011123.734572-1-daniele.ceraolospurio@intel.com